Electricians day 4 hours driving for 19 minutes work!!!

Electricians day driving to Nottingham for 20 minutes work!!! Sub or pulling main fuse.

[@BrynvanNuissenburg]

- [00:58] 🚗 The journey to Nottingham took 2 hours. - [02:15] 🔌 The installation process involved sealing cables into the Easy EV unit, which required special techniques due to the limitations of the product. - [04:46]⏱ Despite the quick installation (10 minutes), it took an additional hour to activate and troubleshoot the Easy EV due to issues with the accompanying app.

[@stephenwillis9518]

I can see homeowners having plug and play options with car charger, especially now new builds are fitting external 32amp sockets.

[@daviddyson8851]

Look back at when you point to the conductor’s saying live neutral earth .are you really an electrician? 😂😂😂😂😂

[@Cjrelectrical]

😉 got a comment

[@shaun30-3-mg9zs]

A long drive for less than 20 mins of work, great job well done

[@Cjrelectrical]

Yeah it was but it’s part of a priced job of 7 EV chargers.

[@tobysherring1369]

At least you didn't try the 4 hr drive in an unsuitable electric van.

[@Cjrelectrical]

🤣🤣

[@marymadigan9707]

Nicely done 😊

[@Cjrelectrical]

Thank you 🙏

[@carlgreen2721]

Liking the video as always, any reason for not just plugging in a 32a ev charger rather than changing to the one you did?

[@neilbissett1240]

Welcome to Nottinghamshire mate 👏😎

[@Cjrelectrical]

It was short and sweet

[@Mc674bo]

I can never understand this obsession of naming an Earth a CPC , we all know what is and what it’s for . I can remember when it became the new buzz word , bit like RCDs had to be renamed . Which by the way as a milestone in the industry, has probably saved more lives than anything else . 😂

[@Mike_5]

You need to leave the van engine running in Nottingham buddy with driver's door open ready to make a swift exit if required

[@Boxingreact]

6ml cable is the right size for EV Charger , lol 😂

[@anthonybragg]

So why has this charger been chosen as the word "crap" was used a lot? New builds still fitting split load consumer units surprised it had surge.

[@Cjrelectrical]

Compared to others this chargers app and back plate is very poor. The users app is great. Again no thought for the installer.

[@steve11211]

how do they do load management? usually you have a clamp round the incoming line..

[@Cjrelectrical]

Optional equaliser kit. Just ramp the charger down on the app.

[@steve11211]

@@Cjrelectrical Agh ok thanks, you didn't show that bit.. :)

[@Cjrelectrical]

Yeah honestly the app is the worse interface I’ve used.

[@stuarth540]

What would you recommend for an ev charger.

[@krispy_kornflake]

lmao we have loads of people for ev charger fitting in notts, why you guys haha

[@chas3997]

Does it have inbuilt PME break protection? And what would you do with a TNS earthing arrangement if it’s TNCS where you can’t see further down the network, would you treat it as a TNCS earth just to be safe 🥶⚡

[@Cjrelectrical]

Yeah built in type A rcd and pen fault detection. If you can’t identify the means of earthing at the origin I’d suggest asking the supplier. Taking a true ZE reading would help.

[@chas3997]

Yeah it’s not all black and white & have to be aware of the idiot that will mess with it 🥶

[@_eusty]

Why 5x on the RCD test 🤪

[@leshackett3687]

I moved to Nottingham 5 years ago and when you see the state of the women you realise why all the men have left 😆 🤣 😂

[@LordLorenzo834]

Done a few of these theyre shite, one locked in the plug and wouldnt come out.

[@robgraham1204]

If your that tired let the laccy drive

[@Cjrelectrical]

Not insured unfortunately.

[@robgraham1204]

​@@Cjrelectrical Fair enough 👍