Electrolux Washing Machine Diagnostics Menu - EWF14742 time manager

[@MegaExplorer69]

Thank you so much. My EWW12753 is now working perfectly.

[@ossakaboom]

Hello 👋🏻, I just wanted to thank you for helping me out with this problem Thanks a lot from Morocco 🇲🇦

[@ApplianceFault]

Hey :) You’re welcome. Good to hear that the video is helpful. Thank you for watching

[@Khalek420]

thanks a bunch my dude. fixed my problem. was refusing to unlock/release the door. tried going into diagnostics mode and it released the door

[@ApplianceFault]

You’re welcome. I’d recommend to check the drain pump filter. In most cases the door doesn’t open because the water has not drained too well because of a blocked pump filter. Also in the diagnostics mode check what was the last stored error in the memory of the machine, this might also let you know why the door might not have opened.

[@davidecarassale9362]

Thanks from the far Italy, now my wash machine is restart!

[@ApplianceFault]

That’s great. Did your machine have any error codes stored in memory?

[@davidecarassale9362]

@@ApplianceFault No, there aren't alarms, the problem was the child safety always on!

[@ubeaut]

Good video. The annoying thing about this machine is I cannot just set a preferred time and wash cycle. I have to press the time button several times to take it to 1:05. It would be good if it had a favourite setting.

[@shuichinz]

I hate everything about this washers interface 😢 it's good otherwise

[@shdgames5125]

Great video, and amazing list of codes to help on your site. Helped me troubleshoot and sort out issues so clear thankyou.

[@BenSunShine]

After I switched to energy saver, it showed ELE? What does it mean? My washing machine automatically turn on and off for a while. After that it run around 1 hour, then stop or restart the cycle again.

[@BrookeO-f3r]

What should the water pressure be on the first 3 dials? I keep getting e10 error code, have checked hose for kinks and blockages and still not working. Numbers are quite high on first 3 dials

[@Maverickrulls2002]

Same method applies to the tumble dryer EDC2086GW3 Meaning, start the dryer, switch to Extra Dry Cotton menu and hold the Start/Pause + Delicate touch buttons until entering the service menu. The service menu positions are found in the service catalog.

[@Bnice2any1]

May I ask how to lock & unlock the washing machine?

[@PBMS123]

I really hope you might be able to help, I have a EWW12753 Washer/Dryer combo, and every so often during the middle of a cycle, usually wash/dry, it resets itself. It hasn't done it a long while, but it has started again, and it make a beep noise and switches off, or resets the cycle ( as if the dial is moved to another option and back, resetting any temp changes or dry times) and if I close the door normally it does the same thing sometimes, and most the time if i close a bit harder, like the board is shorting and the dial is intermittently failing and thinking it is being reset. It seems to do it while washing if it shakes.

[@ApplianceFault]

Hello, Most likely it will be the dial pcb that has failed. Common issue with these machines. Try replacing the dial PCB first, they are cheap, around $40-$50.

[@PBMS123]

@@ApplianceFault Do you know where i can get these in Australia, or if there is a parts list or diagram so i know what to get?

[@ApplianceFault]

The part is called selector PCB. Which state are you in?

[@PBMS123]

@@ApplianceFault ACT

[@ApplianceFault]

These guys are spare parts dealers in ACT: Mayner & Cochran 1/86 Townsville St Fyshwick ACT 2609 (02) 6280 6833

[@manueljojo6538]

Where is the moisture sensor located in the EWW12842 washer/dryer unit? Error code E10 very often appears whenever I am doing my second load of drying(after wash).

[@DarrenWilliamson]

great video .. I followed the instructions and found the "E10" error I see in use is actually an EF4 error .. your faults page talks about it could be just a faulty flow meter reed switch .. do you know what reed switch I need to get to try replacing it? Thanks

[@ApplianceFault]

Electrolux dont sell reed switches, you would need to buy it from a local electronics store and solder it in or buy a whole new valve from electrolux, it comes as a complete unit with valves and reed switch. Just make sure that the water is actually flowing when you get the EF4 error. Sometimes a faulty inlet valve can also give a EF4 error when no water is coming through the valves.

[@DarrenWilliamson]

thanks@@ApplianceFault .. yeah .. can see/hear water flows .. I'm ok with soldering a new reed switch in, just thought you might have known what reed switch is required .. .. before I disassemble it to find it

[@kaitlan8414]

Just a quick question when doing the diagnostic and your going through each one do you stay in each one for a certain period of time or just a few secs then go onto the next one?

[@ApplianceFault]

Just for a few seconds, just to confirm that the component is functioning as it should. The only test that I stay for longer would be the heating test, it takes 3-4 min to heat the water up.

[@kaitlan8414]

@@ApplianceFault great thank you for your quick reply I will give it a go and hope that it helps my machine.

[@bangrak8928]

Great support and explanation

[@NoMoreViva]

There is error code E5E displaying on screen, couldn't find this in your webpage for code errors, any idea?

[@LewiisFrancois]

Hey guys thanks for the video but my start button doesn't respond at all. Every other button does, so I can't get into diagnostic mode at all. Any suggestions. This only just happened overnight with never any issues prior.

[@ashinoz11]

You Legend. That made it so easy to fix. Thanks

[@dhamic]

My diagnostic mode works as mentioned here but can't find any fault except showing precious reading of e10 error which exists when I run load cycle. Any help will be appreciated. Thanks

[@ApplianceFault]

E10 is a water inlet fault. Meaning the machine is having trouble filling with water. In the diagnostics mode, open the dispenser drawer and make sure all the compartments are filling with water on the water inlet valve test. E10 is mostly inlet valve related.

[@dhamic]

@@ApplianceFault thanks for the response. Upon checking again, it seems c02 and c03 option gives EF4 error and I checked only one compartment is filling water properly. Is it only technician who can now come and fix it?

[@andrewgrinter]

Any idea how to stop these machines beeping excessively? drives me insane.

[@terrimcbride1836]

What does EF4 mean? I get that immediately after turning it to the second washing mode.

[@gulyazici3717]

What does the E10 error mean and how to fix please

[@joannaandaya2123]

hi. can you help me about our washing machine, fabcon drawer not emptying ?

[@ApplianceFault]

Hi, Try taking out the drawer. And take off the clip on the fabric softener compartment and clean the drain hole

[@CahirAepCeallah]

I managed to enter the diagnostic mode in PERFECT CARE 700. I think I pressed autodry and start in position no1. Run heating test it starts from around 4C degrees and goes up 1c every 30 sec like you said. It went up to 30 and switched. I opened the door and the inside is very hot. I did it cuz it was washing in very hot temperature in 60 deg setting. But it looks like the sensor is not working properly.

[@vladani1984]

Hey, hiw did you enter diagnostic menu ?

[@CahirAepCeallah]

@@vladani1984 position no 1 then press autodry and start

[@vladani1984]

@@CahirAepCeallah tnx. I was actually trying with closed door that why it didn't work. Do you know how to reset the machine maybe?

[@SageCoaching]

The start\pause button on my electrolux 2266 topdoor does not work although it registers the pressing with a sound. The tests all showed C6H. This happened after an electrical power failure in the middle of a washing cycle. Can you show how to reset? will that work?

[@je-suis-alin]

Hello! How can I enter in diagnostic menu on Electrolux Perfect Care 700 (EW7W369S)? Thank you so much!

[@georgiestewart9797]

Help!!! My door wont open no matter what I do

[@fysontheboard]

hi, can you help me ? my machine cant spin or wash our clothes. yesterday the machine cant spin. i dont know whats the problem. there's no error code display

[@moneyfalcon267]

Mine too. My washer displayed “E57” which means the motor control board has been overloaded/ spoiled. The repairman said he has to replace the MCB. Will update

[@CircaLobel]

Hello, I have the E42 error Door Lock Faulty. There are clothes stuck in the machine, but the door won’t open. When I enter diagnostics mode, the door keeps clicking and E42 flashes on every position on the dial. What steps can I take on my own before calling a technician?

[@MsChenrezig]

I also have this exact issue. Any update on what worked for you?

[@mylesdempsey5510]

I have this machine and I am experiencing water leaking from the soap dispenser as it is squirting out the top and Botton have you had this problem before

[@丂卄卂尺-i7b]

Please any diagnosing mode for Electrolux eww1686hdw model?

[@robert3325]

Thaks for sharing.

[@matthewhubbert8588]

Hello there I know this is over a year old but we are in New Zealand and have this exact model. Overall, it seems to be running fine and ran it through this diagnostic test. Nothing crazy came up but maybe E11. So willckean the water in and out. But the setting it doesn't want to wash in is Wool. It starts, it fills will water but the washing doesn't occur. The timer counts down still. What might be a possible cause for this?

[@margieatalifo7236]

I have the same problem. Were you able to get this resolved?

[@matthewhubbert8588]

@@margieatalifo7236 yeah it was the heating element in the end. Had to replace that. Easy fix

[@lirbic]

My machine shakes very much! It makes a loud sound. What could be the reason?

[@terrytough5300]

I have this machine and it went halfway through a wash then turned off and won’t turn back on.

[@clarehewitt2559]

Thank you learning something new

[@labtestingtest]

Gild

[@rachelgracepedron7434]

helpful video. my washing machine stops in the middle of the cycle in some programs (mixed, rinse) without any error codes.

[@ighfirlee]

Is there a way to increase the default water level using the diagnostic menu?

[@ApplianceFault]

Unfortunately no. Diagnostic menu is there just for fault finding.

[@ighfirlee]

@@ApplianceFault All modern day front load washers should have the water level +/- button at the front panel. They're not listening to their customers!

[@ApplianceFault]

The only thing that I can think of to increase the water level would be to make the pressure tube to the pressure sensor slightly longer. But it will be a bit of trial and error to get the desired water level. Start with a longer hose and cut it shorter to lower the water level.

[@ArtyomEryomin]

Good, you're testing!

[@ApplianceFault]

Надеюсь видео помогло. Какие у вас проблемы с стиралкой?

[@ArtyomEryomin]

Никакие!

[@jonalynlegada1568]

Nice..its working..

[@lacov]

Thanks for the video! I appreciate it a lot. By the way, is it normal for it to start in ELE? What does ELE mean anyway?

[@mjayamalayalam1288]

Hi.. my electrolux EWF12942 always hv problem with the door.. slways couldnt open the door.. what to do.. pleasr advice..

[@Wailn_]

Mine just came up with E57 when I tried to enter diagnostics mode :( Any idea what that means?

[@ApplianceFault]

E57 is a motor related error. It’s either the motor or the motor control module. In most cases it’s the motor control module.

[@AdelineNdiku]

Comment ouvrir le tambour manuellement quand c'est bloqué .

[@reeyanipro4878]

Hi there,i managed to get it into service mode,after that it when I clicked the option and start it says e41 please help thanks

[@Incredibletoo]

Thanks 🎉

[@OfficialTeamBlueSG]

Hi My door is locked and wont open, i hve tried flushing the water and off the plug but still lock. The drainer pipe unable to turn left to fully take it out? Would you be able to advise ? :(

[@ApplianceFault]

Hello, Did you check for fault codes in the diagnostic menu?

[@mohammadalsabti336]

Thank you

[@AlexandrosFratik]

Hi! Helpful video ,I have E51 error on all positions, what this could mean?

[@cpatest1041]

same here..do you know now?

[@sainaabayaraa]

I have i E40 error, what this could mean

[@kaitlan8414]

So what happens if when you do this none of the steps work as it just says E41 on ever one?

[@ApplianceFault]

Have you closed the door?

[@kaitlan8414]

Yes got it closed and it did the diagnostic and end result I think I need a new water inlet

[@ApplianceFault]

Hope all went well with replacing the inlet valve.

[@aleksandrjeljasevic2408]

amazing video thanks you so much

[@paddyc93]

G'day mate, Following this advice I was given E42 fault code - door wont open despite draining etc. Can hear the lock continually clicking but nothing happening... Do you suggest emergency opening the door and replacing the locking switch?

[@dahaha3]

Hi I have the exact same washing machine as yours but it keeps coming up as E42, what does that mean? Thank you

[@ApplianceFault]

The error should be listed on our website. From memory it’s related to the door lock or heating element leaking current to earth. appliancefault.com.au/faults/washing-machine-faults/electrolux-washing-machine-fault-codes/

[@mudarsalameh3406]

What if the Start/Pause light is not lighting ? Please would you guide me

[@ApplianceFault]

Do any of the lights turn on at all?

[@mudarsalameh3406]

@@ApplianceFault YES - the Major big one turned on . and the screen shows a sign of the Lock all the time

[@ApplianceFault]

Have you checked to make sure the child lock isn’t activated? Download a user manual for your machine to see how to deactivate the child/key lock.

[@grahamjones26]

Hi, thanks for the video. On the 7th position the temperature will not go past 40. Should it on this test? Thanks for your help

[@ApplianceFault]

Hey, You’re welcome. On this machine it should. But it does time out after a few min. You will need to switch to a different position for a few seconds and then back to the heater test. But if the temperature does rise and the glass gets warm, then this should indicate that the heater and temperature sensor is working fine.

[@grahamjones26]

@@ApplianceFault Thanks for your reply. I'll see if I can get it past 40. Just trying to work out what needs replacing. I'll get the occasional E10 error but on every wash it'll just pause by itself about 3 times every wash. Pressing start will get it to resume. The water pressure is fine and when I connected it to the hot tap it completed 4 washes without any errors or pauses. When connected to the cold water supply and on a cold wash it'll still pause by itself. Thanks again for your help.

[@ApplianceFault]

In the diagnostics menu, when the dial is on the error read out(I think position 10 or 11) what error does it display? E10 error is a water inlet problem. In most cases it’s the inlet valves that are at fault. Other errors can be found on our website : appliancefault.com.au/faults/washing-machine-faults/electrolux-washing-machine-fault-codes/

[@grahamjones26]

@@ApplianceFault Hi, thanks for the quick response. I'm getting an EF4 error. Thanks for the link to the error codes. Is the flow meter reed switch part of the inlet valve? If so I could try swapping that out. Thanks again

[@ApplianceFault]

Yes, flow meter is part of the water valves. Most likely it will be a sticky valve that doesn’t open sometime to let the water in

[@chezi70]

Thank you for this video. My machine is pausing frequently with no error codes and then will even increase the wash time from 15 mins to 45 mins on a normal cycle. Do you have any clues to what might be happening?

[@ApplianceFault]

When you enter the diagnostics menu and turn the dial to the 11th position, did it have any error stored in memory? If no error stored, then your machine might be going out of balance. And when it goes out of balance it skips back to the rinse cycle to try to redistribute the clothes and try to spin again. Front loading machines can go out of balance if the load of washing is too small or if there load is good size but one of the items is heavy and this can cause it to have balance issues.

[@jackifitzgerald576]

Hi what's it mean Error 22 My machine won't do anything Iv turned on & off ect

[@ApplianceFault]

Hi, E22 is a drain problem. All errors can be found on our website. appliancefault.com.au/faults/washing-machine-faults/electrolux-washing-machine-fault-codes/

[@gorjus_007]

Hi, thanks for this upload as it helped me find an error E85. Can ANYONE tell me what this means and how to fix it? as I've looked online without having any luck yet.

[@TheShmooty]

Thank you so useful

[@ApplianceFault]

You’re welcome. Thank you for watching.

[@geraldinekevan5145]

WHAT DOES AL 91 code mean and wont start

[@geraldinekevan5145]

what does Al 91 code mean on a front loader electralux washer

[@ApplianceFault]

Unfortunately there is no such error code as AL 91 on Electrolux washing machines

[@chefbenz298]

Tq very much

[@ApplianceFault]

You’re welcome. Thank you for watching

[@tomdayler195]

My washing are the same as yours! What the code EFO mean?

[@ApplianceFault]

There is no such code as EFO in the service manual. Did you get this code from the diagnostics mode or did it just come up on the screen during the cycle?

[@tomdayler195]

@@ApplianceFault it come up on the screen about 50 mins after i started it

[@tomdayler195]

@@ApplianceFault wish i can sent you a photo bout this code

[@ApplianceFault]

You need to go into the diagnostics mode and retrieve the correct fault code from the memory of the machine. In a lot of cases the code displayed during the wash cycle is just a generic code that is not very helpful, but in the diagnostics mode it will display a more specific code to the problem.

[@stojcosi]

I got a same error. Did you fix it? How?

[@Reem-gd6it]

Hello, how can I mute my electrolux washing machine when it's finished

[@ApplianceFault]

Hello, Yes you can. If you go to Electrolux website in your country and download the user manual for your model it should tell you the sequence of buttons to press to turn off the sound.

[@svetlanasoboleva]

Hello! This is very kind of you to post such helpful videos :-) would you know and be gracious enough to tell me how to enter diagnostic mode on eww1696swd? I have no buttons at all it is all touchpad. I've searched endless hours.. but unsuccessfully.

[@ApplianceFault]

Hello, кажеться знаю. Turn on the machine and make sure the cycle selector is set to the top right cycle, its usually cotton cycle. Then simultaneously press and hold the start button and the button above it for about 3-5 seconds. this should make the machine enter the diagnostics cycle. Use the dial selector like in this video to activate different components. Удачи :)

[@svetlanasoboleva]

Appliance Fault Спасиииибо :-) получилось!

[@ApplianceFault]

Отлично :) Какая у вас проблема с стиралкой?

[@svetlanasoboleva]

перестала сушить после больших cycles с кодом Е10, но при этом сушила на wash&dry 60 min.. вот я и подумала, что надо перезагрузить :-) всё починилось, уже заканчивает сейчас сушить на cottons Вам спасибо огромное за ответ, и время, и помощь! В сервисе кучу денег просили.

[@ApplianceFault]

Пожалуйста. Если что обращайтесь. Е10 это значит то что в стиралку не набирается вода. В основном это проблема с клапанами. Если опять появится эта ошибка то их довольно легко заменить.

[@Jowilmare]

Thanks for your video .can you please advise How can I resolve EH0 error?

[@ApplianceFault]

Not a problem. EH0 error doesn’t exist. You need to enter the diagnostics menu and go to the error read out setting to get a correct error code. It will range from EH1 up to EH5 or 6. Once you get correct error read out you can check the meaning on our website.

[@ismiarina7985]

hai sir.. can you help me.. my washing machine same on this video.. but something happen.. i on washing machine as usually but at the last wash the cloth it must settle rotate and stop but suddenly number 1 appears on screen and this number 1 take a long time to finish and unlocked and also i don't hear any sound after finish cause this number 1 still appear.. can you help me.. how i want to reset all this like usually or another solution like a press any button on there.. tq

[@abgmohdfakhriabgmohdmohtar3416]

Is there a reset function on this washing machine

[@ApplianceFault]

Unfortunately there is no reset on these machines. Only thing you can try is to unplug the machine from power point for 10 min. But if there is a problem, it needs to be rectified before the machine will function properly again.

[@randybrogan5842]

@@ApplianceFault mm by 😆

[@ginopalumbo4883]

Ciao la mia asciugatrice electrolux mod Rdh3786gdw dopo circa 20 minuti si spegne e si riaccende e lampeggia il tasto avvio

[@asmaaftab5733]

Please help me my machine not door upon

[@ApplianceFault]

Has the machine drained all the water from the drum?

[@engmech337]

Eho eror ..what shold i ckeck

[@jock10171017]

Thanks for your video, it was super helpful. I get a E5H error within 5 seconds of moving to second position (mixed). Do you know what this is??

[@ApplianceFault]

Thanks for watching. Happy the video was helpful. E5H error is a motor control board problem. Check all the connections on motor control and main PCB board to make sure no plugs are loose. If all plugs are connected properly, replace the motor control board.

[@jock10171017]

@@ApplianceFault are the motor control and main PCB board separate? Or part of the one unit? I have removed the box from bottom right below drum from back panel and connections as well as board looks ok so probably needs replacing! Thanks again.

[@ApplianceFault]

Yes, they are seperate units. The motor control board is usually at the bottom near the motor.

[@kylelwiley9743]

@@ApplianceFault Electrolux Model:EIFLW55HIW0 how to reset the error codes

[@ozcanugur1]

Hello , very useful video. I have EWX127410W Electrolux machine. How can i access to diagnostics menu? This process did not work for me.

[@ApplianceFault]

Hello, try this video. This video goes to see the last fault code but if you turn the dial clock wise to every position you should be able to test each component individually. kzbin.info/www/bejne/mWfFq36ledWae8k

[@ozcanugur1]

@@ApplianceFault Thanks , it worked and i got the e66, checked from your website. I guess i have a big problem.

[@ApplianceFault]

Check your heater element for earth leakage and resistance of the heater with the multi-meter before changing the main PCB. These errors are good help most the time and let you know where to look but are not always 100% accurate.

[@ozcanugur1]

@@ApplianceFault hello again, finally fixed the machine. I checked the heater, heater was ok. So i fixed the main pcb, i found a faulty power relay on the card and replaced the relay with new one. Now machine is ok. Thanks for your help.

[@ApplianceFault]

Well done. That’s great to hear.

[@fysontheboard]

what its mean when the error code is E20 ?

[@ApplianceFault]

E20 is a drain error.

[@psychobolia]

Not helpful...I get error E40 constantly even though the door is fine :-(

[@FirdausIman2015]

Ed8 code means?

[@jennya8216]

what is a EF0 error code

[@stojcosi]

I got same error, how did you resolve issue?

[@danijelstojanovic6167]

How to fix error c11

[@beaubarker985]

Why does mine keep pausing

[@ApplianceFault]

It could be a problem with the program selector dial. Sometimes on these machines the selector dial starts to play up and turns off the machine and turns it back on.

[@alimomali9753]

E90 what is

[@asmaaftab5733]

My door machine is locked

[@marylinrizzo136]

Can you help me on how to unlock child lock?

[@ApplianceFault]

It’s best to go to Electrolux website in your country and download the user manual for your model.

[@piluzsection9924]

My washer dont have power.. no lights, why?

[@ApplianceFault]

Most likely the main pcb has failed. Make sure to check the power point first to make sure the power point it self is working.

[@josephng8389]

voice so soft. does not help on E91 error

[@ApplianceFault]

Hey guys, plz don’t forget to subscribe to my channel. It will greatly help my channel grow with more helpful videos like this. Thanks :) Bitcoin (BTC): 1LTB9iJpKQXRhhw2zArW48k6Jkm7Fe7Bac Ethereum (ETH): 0x6bf05a34ccd6d23c7fc1d04c68561ea94ba66965 Litecoin (LTC): MPFAe7t5de6RqHjA7tojJwYhDS91n3mNzf If you would like to donate through PayPal to my channel you can do so on my website: appliancefault.com.au/donate/

[@asmaaftab5733]

But all conditions is okay

[@burstfireno1617]

perfect care 900 doesnt work. if tryied all videos on the youtube 👎

[@mobarakahmed7716]

My washing machine show E40 error … please anyone about this and how could I solved this is … kindly tell me

[@丂卄卂尺-i7b]

Please any diagnosing mode for Electrolux eww1686hdw model?