ELECTROMAGNETIC Drill Press Stand [PLANS]

If you would like to download plans for this project, click the blue "JOIN" button next to the SUBSCRIBE button :)
Before the construction of the drill press, I've decided to make an electromagnetic vise to check if it would work.
Guys from Make it Extreme have inspired me to make this , here is their channel. You should definitely check their constructions.
/ makeitextreme
Despite the lack of a milling machine, It has turned out that the file could also deal with it. It has been very time-consuming, but fortunately successive.
Electromagnets are connected in series, so they do not heat up. They are powered by a 12V 4A power supply. This is enough, although a 10A power supply would be better.
The stand base is made very solid from a 10mm thick sheet and a 6mm thick angle. Thanks to the adjustable column, I haven' had to worry about perfect angles during welding. Everything can be easily set up thanks to four screws and nuts.
The sliding mechanism moves very smoothly and stably. Thanks to the bearings, some of the resistance has eliminated which gives better working comfort.
I've used Metabo Sb Edv1000-2-S metabo drill with 1010 watts power, which is 3 times more than my bench drill.
I've also planned to do lighting, unfortunately I've been tired and I couldn't do it:)
This project has turned out to be a very successful construction. The whole weighs over 20 kg, it is very stable, strong and effective.
---------------------------------------­­-----------------------------------
Follow me on:
INSTAGRAM made_inpoland
FACEBOOK 1187887134621389/
---------------------------------------­­-----------------------------------
Some tools I used:
Step drills - www.gearbest.c...
Tap and die set - www.gearbest.c...
Bit Screw - www.gearbest.c...
---------------------------------------­­-----------------------------------
Business contact: [e-mail]

[@MadeinPolandChannel]

Finally, a new video with over 100k subscribers! :) Thank you for being here!!! Consider supporting us on KZbin by using the button "JOIN" or click on this link: kzbin.info/door/8KQ6_RNAvc7a3B5hZ980iQjoin Plans goo.gl/6ht9Ci

[@fuscanetcom]

Made in Poland man you rock. Awesome construction. Would you add a cross table and make a tremendous milling machine ? What was the total cost you spent ? Congrats

[@groundcontrolgainesville4841]

What is the other material that you mixed into the epoxy?

[@buczo102]

Gratulacje za 100k !!! A sam projekt jak zwykle mega! :)

[@aaronwood3540]

Made in Poland I'm guessing the sand was for weight?

[@andrewshanewarkentin]

Love your stuff. Keep on building.

[@peterfitzwell9658]

"If you can't make it perfect, at least make it adjustable." That's going to be my new workshop motto😂

[@silvergrizzly316]

I really don't think there is anything you can't build my friend!!! 👍👍👍GREAT JOB!!!!

[@MaturePatriot]

Pan, jest RZEMIEŚLNIKIEM! I Dokonywanie stół elektromagnes dla moja Wiertarka. Mam już dwa transformatory z kuchenek mikrofalowych. Teraz mam projekt! Dzięki za inspirację! Przy okazji mieszkam w USA, w stanie Tennessee! Przetłumaczone z MS Word

[@jarokowalski3355]

Chłopie. Uwielbiam Twój pomyślunek, a jeszcze bardziej zapał i realizację. Pozdrawiam. Oby więcej takich pozytywnych ludzi. Aaa ! I nie przejmuj sie krytykantami co sami ci do pięt nie dorastają bo sami niczego podobnego nie zrobili.

[@МаксимИванов-ш4ф7н]

Salut z Doniecka. Nie przegapisz Twoich filmów przez rok Jesteś po prostu przystojny !!!

[@pawelaco]

Projekt i wykonanie znakomite, brawo Made in Poland

[@BlackBeardProjects]

Hell yeah!!! Congrats for 100k my friend :) Absolutely deserved. Keep on making cool stuff

[@mikebaee7731]

I absolutely love you guys supporting each other! Big ups and much respect Made in Poland, Black Beard Projects, SEK Austria, Let's Learn Something. You inspire me

[@SekAustria]

Wow! Congratulations to your 100K Subs, More Power Brother :D

[@MadeinPolandChannel]

Thanks man!!! :)

[@gniewkoprzecudny4095]

Nigdy sam bym się wykonania czegoś podobnego nie podjął ale respekt za wytrwałość w dążeniu do celu !!!

[@ПавелФедяшин-о6е]

Bardzo fajna wiertarka! Naprawdę podobał mi się panel z magnesami spod kuchenki mikrofalowej! Jesteś bardzo dużym facetem! Przepraszamy za tekst. Oglądam Twój kanał z Rosji i korzystam z Google Translator. Powodzenia w branży obrabiarek)))

[@Peter-Abg]

This magnetic holder would be a nice extension of the well known Wabeco drill stand. Impressive metal maker skills! Another nice addon would be a protection screen to prevent metal sparks flying around. Keep up the good work!

[@stevefpv4669]

Impressive! Great job Darek. Always thrilled when I see you upload a new video I have to watch it asap :-))

[@ProlificInvention]

Very nice work *Made in Poland* one of the best channels on KZbin, I watch all your videos.

[@tek4]

Madeinpoland you need a third switch to pass a.c. threw the coils to demagnitise everything you have magnetized with this, that way you won't be a walking mag lol. Awesome video. Maker in Rhode island USA here

[@mr.ranyhomemade2466]

Awesome! Your homemade drill press and work. 👍👍👌👌 I will upload my homemade drill press on Sunday if I finish

[@christurnblom4825]

That's a great idea. I've been wanting to make my own surface grinder and haven't come up with a cheep way for obtaining a magnetic chuck. Something like this with maybe two more coils should do nicely.

[@georgemcmillan9172]

Gotta' hand it to ya' man, you build some pretty ingenious stuff!!! I have a benchtop drill press already, but I'm building the electro magnetig setup for it!!! Thanks for the idea! Oh, by the way, subbed!!!

[@kaumohlamonyane272]

I honestly believe if you are just as good as the guys on Make it extreme💪👌

[@NiclasutanK]

Great work, inspiration. I built myself a hydraulicpress with alot of ideas from you. 🇸🇪🇵🇱

[@gasperajdnik5627]

I love this Chaneel. Greetings from Slovenia 🇸🇮🙂

[@metalmogul4691]

Darek, Just saw this video. Really like the magnet and the drill press build. Watch out for the unburned oil smoke. It has been proven to cause bladder cancer in all trades that cut metal at high temps with oil.

[@DeividSSilva]

Congratulations on the incredible skill and creativity!

[@bigpapi3636]

MiP fabricated two e-cores with an angle grinder. Awesome! Just found this channel and subscribed. This is what engineering is all about!

[@flightforfight]

WoW!!! Amazing proyect and skills!!! Congratulations from Argentina!!!!

[@KiranDigavalli]

Congratulations on the 100k subscribers! Awesome to see how much the channel has grown. Cool project, and clever use of the MOT.

[@mikevanwieringen9883]

Impressive build...Well done, Darek !

[@georgeswindolljr1980]

You are an outstanding craftsman, and an excellent all around technician too!!!!

[@abec666]

Im speechless BRAVO from Greece!

[@jameshanoomansing1442]

great job....learning everyday from you Sir

[@TecnicaX]

Muy bueno el taladro, se nota tu talento para visualizar las partes mecanicas. Un saludo amigo. ;)

[@RedBeardOps]

You are ridiculously skilled... subbed

[@villain1409]

That is as co0l as a Cucumber! Hope u have many years of joy with it.

[@ZenMinus]

Very good. I have two suggestions, embed a piece of PVC pipe between the magnets so that swarf can drop though into the tray below. Use PVC so that the fields of the electromagnets are not impaired. (You will of course need to drill a hole in the table below the magnet assembly). A vice bolted to a suitable sized plate for the magnet assembly, will help hold smaller or awkward parts.

[@bartosznalepa9546]

Tak jak pisałem wcześniej jesteś za każdym razem lepszy ( widać to choćby po spawach ) Powodzenia trzymam kciuki

[@MikeyMack303]

Great project! And congratulations on over 100k subscribers!

[@CatLighting]

Teraz droga po 1 000 000, świetna robota!

[@henryrollins9177]

You are a master!!! Congratulations from Argentina...!

[@albouyhadrien1886]

Dude, your videos are getting better and better. Awesome job :)

[@PhilVandelay]

I recognized that mechanism :) Great build as always!

[@michalmarciniak527]

Phil your movie that's amazing too. - bike front rack - mini / light cargo bike I was watch everyone:) Keep record

[@pipatpipat1005]

มอเตอร์ไฟฟา้รถ

[@AnttiHarri]

Nice video and project. I liked that you used sand as aggregate and also the chip tray was nice.

[@smd486]

Nice video, for what your design lacks in refinement, it more than makes up in with in your creative improvised methods that us without a fancy workshop can relate to and apply ourselves

[@jerrymadin1656]

You almost can create any machine... you are great machine creator...

[@danmoreton1788]

A real craftsman! Great video.

[@rickyjohnston3000]

Just found your channel! Hello from Virginia!

[@_I_Am__]

Super. Badz kreatywny, pozytywny, udowaniaj sobie a nie innym.

[@MakingStuff]

Congrats on 100k!

[@marcbroussard2433]

Now that was a great build by a competent mechanic. The attention to functional detail was easily apparent throughout the presentation. A clean no frills design. Your welding and fabrication skills are impressive. Is there a way to make it portable like the Milwaukee mag-drill? One that would grip a beam or something and drill a hole in it. I would love to build my own mag-drill.

[@lemmonsinmyeyes]

Using sand to make more volume for the resin; smart ! 🤔

[@bigpapi3636]

lemmonsinmyeyes keeps the shrinkage down as well as any potential for cracking at the corners of the coils. Yes, smart!

[@albysmorales4029]

Fantástico! No he podido dejar de verlo hasta el final.

[@renoszervopoulos3134]

Completely insanelly perfect idea and a hell of a perfect making.bravo fron greece again.keep up the perfect work and your loco ideas and keep sharing to make your subscribers learn from you.thanks for sharing.thumbs up!

[@czkamil87]

Przecież to jest świetne. Jak mi się uda dorwać zepsutą mikrofalę od razu zabieram się za taką wiertarkę z magnesem

[@HRTsAFyre]

Wow, you are amazing. I can't do this stuff but I was riveted to my seat unable to stop watching.

[@Piterworkshop]

Awesome!!! Thanks for share all those ideas Best regards from spain

[@RochaKRG]

Very nice friends

[@CyrusBee]

This is exactly what I’ve been looking for! I’ve been wanting to build something like this and have been looking for videos to give me ideas but nothing has been quite right, but this is it! Just liked and subscribed :)

[@CyrusBee]

Also I would very much like to use your plans for this but in the description it says to hit a blue JOIN button next to the SUBSCRIBE button to get the plans, but there is no Join button... :( Can you provided a link maybe? Thank you!

[@2to253]

Spoko projekt. Polak Potrafi. Powodzenia! :)

[@dominocweber9763]

Well done. Very skillful

[@TheKiler2011]

Rewelacja chyba też coś takiego wykombinuje.Gratulacje, życzę co najmniej 500.000 subskrybentów .

[@pogue6327]

just found your channel and HAD to subscribe. Brilliant work!!!!!

[@niklar55]

If you had cut two holes in the back of the magnet box, placed it face down onto a sheet of glass, then poured in the resin, through the holes, you would have had a perfectly flat surface, without all the grinding and filing.😊 However, excellent job! 10 points!😉 .

[@50FTY]

Very well done partner,,, Just too Good

[@Garganzuul]

Sweet work! Maybe add some non-circumventable protection for the coils since they are difficult to replace?

[@СашаЗаварихин]

Электромагнит лучше сделать из домофона дверей. Трансформатор 1 обмотки имеет по синусоидальному напряжению своё реактивное сопротивление X. Тогда напряжение и ток у электромагнита всегда постоянный, соответственно при постоянном токе сопротивление катушки будет намного меньше реактивного. Надо уменьшать напряжение на катушке активное постоянного тока до сопротивления в изначального реактивного сопротивления, что проверяется током загруженного трансформатора в работе через диодный мост к амперметру до разделения трансформатора по полам. Потом 230 делим на измеренный ток вычислим правильное реактивное сопротивление для дальнейшего расчёта ,а именно сопротивление реактивное должно стать равному активному что делается уменьшением напряжением постоянного тока проходящему через электромагнита. Я думаю что ваш электромагнит скорее всего без охолождения жидкостью скорее всего будет сильно нагревается.

[@serhio-cu8ii]

Правильно, и микроволновку портить не придётся. А домофон можно в подъезде взять.

[@spr822]

I like your videos, you are a genius 👍!

[@CoffeeandCancerStix]

For once a diy solution in my recommendations that doesn't start with hot glue and a toilet paper roll! This looks very practical and well thought out.

[@stolarniakrzysztofszocinsk851]

Haha chciałem zrobić takie imadło na elektromagnes, ale mi się nie spieszyło ;) Proponuję zrobić jeszcze v2 z imadłem poza osią wiertła, tak aby można mocować całą wiertarkę np. na środku arkusza blachy. Gratuluję 100k, z każdym filmem rośnie również jakość. Szacun ;)

[@marekroszkiewicz3524]

Przyłączam się jeśli można:) Gratki 100K subów trzymam kciuki i za milion :)

[@sylwesteradamowski4317]

@@marekroszkiewicz3524 wystarczy przykrecic elektromagnes od spodu a wiertarke obrucic o 180 st haha

[@mahesh1757sardesai]

Just fantastic ....you are really genius and creative guy...i enjoy watching ur videos..👍 'Kudos' to you

[@soulhunter0]

Awesome build!

[@ВладимирПриступа-з3р]

Да,полуавтомат творит чудеса!

[@ElChokin]

Muy buen invento y trabajo, has creado un electro imán para la sujeción de los hierros a tratar, enhorabuena, saludos desde Punta Umbría-Huelva-Andalucía-España (Spain)

[@tazzthedoodle7861]

Well done sir!! Be crazy to see what you could build with a lathe and mill

[@Bdcollins111]

Well, thats one way to magnetize the crap out of your drill bits, really great job though dude

[@zbudujsamdom]

Epic films! watching with love what You doing! DIY master!

[@Cactusworkshopchannel]

Great job my friend!!

[@tinkerpertao8383]

Canada: 1st thanks much 4d video. Please it's time 2 do next video(s) on wiring schematic diagram of the Drill, DIY Magnetic platform. Inspiration Ideas Creativity Motivation. Really appreciate what you had done. God bless.

[@Kacper-ch9ds]

Wykonanie genialne, gdy tylko zobaczyłem mikrofalówkę już wiedziałem na czym będzie polegał elektromagnes :D Szkoda tylko, że przy uszkodzeniu cewki będzie problematyczne by ją wymienić, ale film genialny!

[@dexter-ks7rz]

Bravo 😄 to the channel...looks very easy but.... It will take years for me to assemble all those tools and equipments in one place 😣...

[@Ничегонезнаю-з5и]

Хорошая решение, но не нужно сворачивать провод кольцами. Создаётся магнитное поле которое приводит к потере напряжения и тем самым повышению силы тока. Проще говоря провода будут плавить изоляцию. Лайк однозначно.

[@chuckintexas]

Found 'em ! EXCELLENT ! Thanks !

[@MCsCreations]

Fantastic work, man. Really, really good! 😀

[@VincesEngines]

Well impressed ,great job.

[@Mario-ce1dp]

Really a great job .... congratulations!

[@286Mohan]

Excellent and perfect and professional work....Thank you dear for your skill,and knowledge.... Great job

[@hartonokharisma5192]

So excellent,so professional bro....

[@gregstanley1075]

Great tool to make with my everlast welder. I've always wanted a magdrill.

[@ЛеонидЛитвинчук-о3й]

Ты супер.Без слов и все понятно.Смотрю пятый раз всеравно что первый.

[@edoardosoave]

Great creation! It is impressive!!!

[@bubisav123]

Amazing job. Bravo

[@dimapolch6328]

Гениально, респект! Genialne, respect!

[@Dr.Saudii]

thank you very much you are amazing I love Poland

[@MarkProffitt]

Brilliant! You can use steel blocks to fasten non-ferrous objects.

[@henrikhv5084]

congrats on the 100K :-) and I like this video, great idea, and very nice work.

[@vinpol6183]

Классная идея с электромагнитом! 👍🤝

[@kamilfrackowiak4226]

Duża wiedza z elektryki i projektowania naprawde ładne dzieło łapka leci 👏👏

[@azimalif266]

That is a nice use for those magnets.😁

[@АндрейВорошилов-е9и]

Отличная задумка!

[@paulocesardasilva1814]

Muito bom sua inteligencia ,com recuperação de sobras de ferragens e sucatas ,com gasto minimo formando algo novo,meus parabéns pelo seu conhecimento e dividir o que sabe com os amigos ,muito bom .

[@redneckthreepercent]

That is really awesome. Wish you were my neighbor

[@MKDSime]

Is the drill bit getting magnetized after drilling ? Great Craftsmanship keep up the good work cheers:)