Electronic Repair Adventure- Radio Receiver Troubleshooting!

[@MrCarlsonsLab]

To learn electronics in a very different and effective way, and gain access to Mr Carlson's personal designs and inventions, visit the Mr Carlson's Lab Patreon page here: www.patreon.com/MrCarlsonsLab

[@TheDrunkenMug]

Proud Patreon of MCL ! You never cease to amaze me Paul, and I'm sure that goes for anyone who watches your channel. Another one for the couch tonight, awesome. Take care, stay well. Best regards from Holland,

[@DankNoodles420]

How do I contact you to get a quote for a restoration of my dad's Sony home stereo system, it has a bunch of included units, a TA-AV571 amplifier, CDP-CX571, ST-JX661, there is also a tape player unit and another one I don't have with me at the moment.. also the sub boxes have rattle in them too and probably need a restore. They are SS-U571AV. It would make a great video or two I'm sure..

[@Haamedtm]

Repairing stuff is great and all but building something is more educational. please build something from scratch, anything!

[@fvckyoutubescensorshipandt2718]

@@Haamedtm He does do builds as well, just not nearly as often and most of them are on his Patreon. Off the top of my head he did a nixie tube counter for YT, also some of the tools he uses he designed and built himself.

[@fvckyoutubescensorshipandt2718]

@@DankNoodles420 Electronic repair shops being as rare as they are now (most now just restore it themselves or sell what's left or throw it away) he probably gets thousands of such requests = probably has a lifetime's worth of work to do already.

[@nosnibor800]

Entertaining Mr Carlson. I am a retired electronics/systems engineer (UK), but started out building valve radios when 9 years old, in 1962. So I enjoyed watching this. Repairing/troubleshooting old radios like this is an art and little to do with electronics knowledge per se. Thanks once again. A lot of modern digital electronics is so clinical and boring compared to old analog radios. I think a lot of young M.Eng graduates would not know where to start !

[@MrCarlsonsLab]

Thank You for your kind comment Philip!

[@reshba]

Mr Carlson is the Bob Ross of electronics. I just cant get enough of this!

[@u2509249]

Would definitely like to see the IF alignment and results. This radio is awesome!

[@radiovalkyrierecords5102]

Agreed!!

[@lucvanhove9639]

It's also different from the rest. Special mf 466Kc and multi band. Greetings from Belgium.

[@finsterclause7184]

I look at this electronic unit and all I see is man hours done by professional electricians and wood workers. Absolutely Gorgeous.

[@RocRizzo]

These old radios are simply beautiful. It is quite a wonderful contribution to our knowledge of these in the days of digital, that someone like you can share this knowledge with us. Keep up the great work!

[@terriecotham1567]

You have to love old radios as they were all so works's of art and like old car's people took pride in owning them and treated them with respect. One of my first electronic courses we had to build a 5 tube superheterodyne reciver and the instructors would leave bad parts in the binds. You had put ever part and then test each part as well. Those two old teachers had a smiple way of teachers I love it when people like you take the time to help bring those old machines back to life and in the process all so teach anyone who who may like to learn about those units and how to repair them. Thanks for posting

[@MrCarlsonsLab]

Glad you enjoyed Terrie!

[@ltdees2362]

Ahhh...never to old to learn...at 70, you have shown me many new troubleshooting techniques...You have a profound natural talent and teaching ability...thank you for your dedication!

[@MrCarlsonsLab]

Glad you are enjoying Tom. Thanks for your kind feedback too!

[@telwood15]

At 76 I also have learnt from these videos

[@redsquirrelftw]

That's an awesome radio, they just don't make stuff like they used to. Lot of pride went into that. Cool to see it working.

[@johnvaldez8830]

I am on the edge my seat almost shouting, "it's a short in the filament circuit...there's an open wire!" and so on. It's just so much fun and the best part is learning the step by step trouble shooting procedures with the safety tips. Top notch video!

[@MrPatdeeee]

I just stumbled on this channel. Wow what nostalgia. For I started in 1952 at DeVry Institute in Chicago, to learn radio and TV. I loved it and I was hired on by RCA service company; after I graduated from DeVry. I retired from RCA after 33 yrs in 1986. In 1968 RCA opened up 6 training centers around the nation; just after color TV came into being; to teach technicians to install and repair Color TV's; because there was NOT a single training school that did it. One of these centers was in Miami and I became an instructor there. It was awesome. I had NO idea there were people like you, still working on old AM radio's, etc. I am in awe. You, young man, are VERY well "trained" on things I used to teach. WOW! I just cant get over it. WOW. I just turned 88 and indeed you have taken me back many decades. Thank you so much kind Sir. Note: The "J" scenario when soldering, is a life long pet-peeve of mine. I would not do it, nor would I tolerate it. WOW!

[@MrCarlsonsLab]

Thanks for your kind comment Pat. Happy birthday too!

[@davemiller6893]

Thank you Mr Carlson for another enthralling video. I enjoyed it very much. And how appropriate that your video be published just today. Sadly I lost my cousin and best friend today as a result of covid 19. He was an old radio ham, 86, and electonics buff, G3OTW. He was my mentor and together we would restore old valve radios in my shack. Sadly the seriousness of this pandemic is brought home with a bang when someone you love is taken. Watching your video brought back so many happy memories of me and Bill and the many, many paper waxies we changed together. Thanks Mr Carlson and 73s to Billy. Stay safe everyone.

[@MrCarlsonsLab]

I'm sorry to read of your loss Dave. I'm glad this video gave you some good memories. Stay well!

[@WeaselJuice]

I’ve watched literally thousands of videos on KZbin. Your channel has the best audio, hands down! Maybe a video on how it’s done? I’d enjoy that! 😀

[@MrCarlsonsLab]

Thanks for your kind comment William. I will consider that.

[@StewartMarkley]

@@MrCarlsonsLab I second that request, and looking at your video setup also.

[@SirEggbertfartalot]

@@MrCarlsonsLab I'd like a video on how you "Mr Carlsonised" your Microphone ;0) Maybe included as a part of William's request ? You mentioned in another video, that you "tweaked" the mic, and gave a little smile :0)

[@JimParshall]

I also vote for your audio setup to be covered. You have incredible audio.

[@jimblazer4484]

Thanks I was wondering if ANYONE else noticed how much $$$ and money this guy puts into his work.Its the actual reason I first started watching him.

[@beachbum9869]

Would live to see the whole alignment. As a tech I loved doing radio alignments. Both transmit and receive. Just loved it. That was a life many years ago. Thank you for letting me relive them through your videos. Stay safe. Stay healthy.

[@edwarddejong8025]

what great work you do, resurrecting this old equipment that hardly anyone else cares about. So nice to see something rescued from the junk heap. Today's electronics are unrepairable, which is a terrible shame.

[@larrybud]

I disagree. I've fixed a couple of big screen LCDs which are a piece of cake. Everything is just module computer boards. The power light flashes the error code, and you can figure out (usually) which board is bad. Open it up, unplug the old board, plug in the new board. Sure, you can't replace individual components because they are all surface mount (plus, there are few individual components expect on the power supply), but I think the most expensive repair I've done is maybe 60 bucks, and takes less than an hour.

[@jimmer147]

I’ve said it before but I’ll say it again. The audio non these videos is amazing. I know nothing about electronics but still listen to every word. It’s just so clean

[@bwithrow011]

If you haven't subscribed to Mr. Carlson's Lab, do it now. His knowledge is totally amazing. Keep up the good work Paul.

[@dajiban]

Considering the relative rarity and complexity of the tuner mechanism in this radio I think most of us would vote for a follow-up detailing the alignment process. Thanks for hosting a very informative and fun channel!

[@Carstuff111]

I love watching someone in the modern world, using a combo of old school, new school and self made tools to fix old electronics!

[@mikesawyer1336]

I especially love it when you use the old fashion test equipment to fix old time radios.. you are such a showman and a craftsman.

[@mitch3064]

Another great video. Years ago I would not have believed I would find so much interest in watching someone take apart and repair an old radio. Thank you Mr Carlson!

[@MrCarlsonsLab]

Thanks 👍

[@chrismosley409]

Love seeing these old radios come to life again. Never gets old.

[@TheRadioShop]

Very impressive unit Paul. Also I have to say your trouble shooting thought process is superb ! These are the type of traps that stump many young techs when working behind failed repair attempts. Enjoyed the show.

[@davekendall4698]

Reminds me of playing with old TVs when I was 10 years old. I love that you keep the old things running and Interesting use of the meter (no cheap DVMs) & (no DAB radio upgrades) just restored to work how they where meant to be. You are a very skilled thank you for making the video.

[@mtkoslowski]

You have an outstanding channel Sir which has and continues to educate me. Thank you.

[@MrCarlsonsLab]

You are very welcome

[@rebelba42]

The Person who swapped those foil capacitors definitely knows the outside foil tester and how to mark them with a red dot, that's for sure :) Many thanks Paul, for making this in Lab II. I really enjoyed watching this repair using a mixed of vintage or self invented test gear! Great Video!

[@YonnyHagstar]

Outside foil is no longer marked as it is considered irrelevant except in very high end high gain high fidelity applications.

[@davidbenson001]

Your knowledge, and your ability to explain and teach, are exceptional. Thank you.

[@MrCarlsonsLab]

You are very welcome

[@davidbeard6851]

I never get tired of watching you at work with these investigations and restorations. It's an inspiration! So please let's see the IF and RF re-aligned on this fine old radio. Looking forward to it and I'll bet the dial tracking's a bit off!

[@josephbolz4550]

I studied electronics for two years. Ended up an industrial electrician/technician. Card plucker at best. That was a great video😎Watched the whole bloody thing. Would love to take up antique radios as I near retirement

[@Maxxarcade]

It still blows my mind how much care and resources used to go into electronics back then. Everything was a work of art. Same goes for old cars and buildings. Try building something like we had in the 1920's movie theaters nowadays!

[@absurdengineering]

It still blows my mind how much misinformation and absolutely mindless idolization of the “good old times” there is. The idea is that less resources is better! The fact that those old designs and manufacturing processes were resource hungry was absolutely not a good thing in the long run. Now we got all the wonderful superfund cleanup sites from the “good old times” when resources were “not a problem” (a lie we dearly pay for now) and you could pollute like crazy and make people sick and nobody was any wiser because we didn’t know all that much medically yet. If you talk about any reasonable performance measure, old cars (1960s and earlier) are universally terrible. Power to mass ratio, vibration and harshness, component life and performance (old shocks vs. current ones - night and day), cabin noise levels, emissions - you name it, it was poor, bad, or worse. Those movie theaters from the 1920s? Nope. Don’t want them. They were temples of excess, used to pull in the masses because excess and gildings were a distraction from the relatively less glamorous everyday life. I’d rather everyone is able to enjoy some splendor in their own family life (in all sorts of way), and have the resources for it, rather than having to go visit a temple. Modern tech is very resource-mising and it’s clearly represented in the prices of consumer goods. With not all that much money you can do at home what was barely dreamt of just 75 years ago. I’m glad backwards time travel isn’t a thing. Compared to what we got now, everything took forever and the simplest of things were an escapade. Want to watch a movie, rent a book, get some new music to listen to? You walked or you drove… I’d much rather walk or drive when I feel like it, rather than when I have to. But that’s just me. And while working on old tech is a cool hobby, I’m glad a smart watch has multiple radios in it, and I can use it to play music wirelessly through earbuds that got no wires. Nothing shabby about that sort of progress.

[@redsquirrelftw]

@@absurdengineering Thing is these old things were designed to last a life time and be repaired and were normally made more locally. Everything is also done at huge scales now. Back then you had a small family run company churning out maybe 100's of units per month, now you have these megafactories in China churning out millions of units and sent on big boats all over the world. Way more resources are used now because of how globalized everything is and fact that stuff is designed to fail so you buy more often.

[@absurdengineering]

Red Squirrel You might be surprised to learn then that the price has some reflection of the resources used then :) If it truly used more resources, you’d pay way more. No magic here is possible. If you pay $100 for a widget, no more than $100 of resources were used to make it - not unless it’s dumped or subsidized. Absent subsidies, nobody can sell you a $100 radio if it used $200 of crude to make it. Nope. So that’s all there’s to it. Stuff’s cheap due to economies of scale. Shipping a million widgets in containers on a ship around the world uses about as much crude as that family company shipping those 100 radios around the US. I’ll take the ship, thank you.

[@thzrealist]

Hey Mr Carlson, I just discovered your channel and as a technician I extremely appreciate it. Can't stop watching your channel, such a educative, informative and attentive channel. Thank you very much for sharing your knowledge and skills with us.

[@MrCarlsonsLab]

You're very welcome!

[@tomwolf1059]

Thanks so much for the memories. My father taught me how to fix radios similar to this back in the 1960s. Learned to always look at the previous repairs first because thats usually where the error was added!

[@Steve-ou8nw]

That radio in the thumbnail is a work of art! Such craftsmanship-nothing like the featureless black plastic crap made now.

[@turiddu9]

Mr. Carlson, you are a Canadian national treasure! Thank you! And yes, please do the RF alignment. Could you please also explain the intermediate and carrier frequency, the why, the how, etc?

[@steve-o6413]

I'd like to see a Series on carrier wave frequency also, explaining their advantages and disadvantages the long and short of it so to speak. I think it would be very educational...

[@bradboardwell8295]

I never knew a video like this would be so informative and entertaining to me. Electronics is not my forte, but the way you explained it and how thorough and Easy to understand you make it, is awesome! Great job, Sir!!

[@MrCarlsonsLab]

Glad you enjoyed it!

[@DaScribe100]

Dunno how sad this sounds, but, I really enjoy the re-alignments you do. Some of the best bits for me. It's great to watch you go through the trouble-shooting and repairs too!

[@fretlessfender]

Your sincere friendliness and matter of fact knowledge put a smile on my face... although I don't have the education to follow all you are talking about, I still watch your videos even if they take an hour. That is craftsmanship! No other way of putting that.

[@georgejohnson1498]

It would be lovely to see this radio aligned, and working just so!

[@michaeldavidheit]

I learn so much just watching your videos even though I've been in electronics for so many years dating back to the 1060's and had my own TV / Radio repair shop up to today where I'm working most of the time in modern computerized equipment. So many of the radios you get in remined me of how beautiful the cabinets craftsmanship was. I miss that today in "modern" equipment. No beauty, just cabinets. Even your workbench in this video looks beautiful ... I'd be very hesitant to work on such a beautiful bench. Thank you very much for sharing.

[@wouldchuck3619]

I really enjoy you taking us into your lab and showing us how you get it done! I for one would like to see the alignment of this radio in the vintage lab for sure!! Thank you for making such great videos, keep it up!!

[@supralapsarian]

Was anybody else hoping the blue end of the pointer would find its way behind that wire break? It barely did for a couple of milliseconds, then nope. Haha! Another fabulous installment. Thank you, Mr. Carlson!

[@badass4226]

Mr Carlson, your videos are like a good movie. can't wait to see it. an hour ain't long enough!!

[@ROLANDO72510]

it seams so easy just by the way you explain things keep it up sir respect from France !!!

[@harryhall5092]

Yes Paul, do the alignment for I've enjoyed watching the repairs. I want to see how this beauty from years ago and was really built for long distance reception performs! I love seeing them come back to life.

[@padraicmcguire108]

Would love to see you do the alignment. Ha, love hearing wwv!

[@shrievy]

Excellent as always! I for sure would want to see an alignment with the vintage test equipment on bench #2, done it old school fashion so to speak. Thanks for the time you put into these videos.

[@gc3098]

This entire video was very impressive and definitely Not Boring. Back in the late 60’s and early 70’s I use to collect old radios at garage sales. I never paid more than $10 for them and they had to work or I didn’t buy them. I never did learn electronics and regret that. Nobody ever told me I should never re-finish them because that devalues them - but I did. I did replace the horrible wiring in them. The floor models were my favorites. I have Subscribed and look forward to any future videos. Thank You for bringing this to us.

[@MrCarlsonsLab]

Welcome aboard G C!

[@100Ronster]

Thank you for taking the time to share this with us. I'd love to see an alignment video.

[@philipblick8887]

Excellent video Paul very enjoyable to watch. Yes please let's see the alignment process. Greetings from Auckland New Zealand

[@Sharklops]

Awesome to see the old-time bench in use!

[@Ed-zx8lz]

Excellent way to explain possible problems, details for testing, overall function of the item.

[@davidmiller4594]

I wish you would make a calendar featuring your equipment. I would definitely hang that up!

[@jamesneff2519]

Being a sort of "electronic nerd" and l am fascinated with old radios I really enjoy this video. Awesome!

[@placebomessiah]

I love this. You absolutely rock the analysis and breakdown

[@roscoefoofoo]

You're a wizard, Mr. Carlson!!

[@maryrafuse2297]

Mr. Carlson, this has been very enjoyable and helpful. Greetings from Cape Breton Island, Nova Scotia. Keep well during this time of isolation.

[@waynethompson8416]

Yes Paul, Would love to see the video of your doing the IF alignment on this radio. Also, making sure that the dial matches the frequency of the signal received. Your video's are, as always, tremendously inspiring, educational, entertaining, and a joy to watch!

[@quicktastic]

I would definitely like to see the RF alignment on this.

[@Rems61]

I would too, But I don't think it's that far off. Excellent sensitivity, so front end seems close, good selectivity so I.F. is probably pretty close too. Couldn't see dial real well so couldn't see where dial was when tuning WWV, so no comment on that part of alignment.

[@quicktastic]

@@Rems61 You are probably right, I just like to watch the process. :)

[@docholliday3150]

me too

[@martinda7446]

@@Rems61 It is inconceivable that this thing is still within spec. It may well seem acceptable but it will need aligning. (Blimey, I almost convinced myself there...I'm only a quarter way through so don't know the whole story yet).

[@stevendonovan9762]

I was actually expecting to see it I did not realize time was coming to an end. I fully agree it would be nice to watch and see that end result., it is a beautiful radio.

[@roberthart8933]

Thank you Mr Carlson for this video. These big old radios from the thirties and forties have a aura of wonder about them. It was the so called golden age of radio, Wonderful cabinets and often quite complicated dials and component layouts and short wave. When I was a kid my father had a short wave radio and I also built one in the 1960s and listened with wonder at all the overseas stations in umpteen languages.

[@newtronix]

Transmitting from the vintage lab! Looks good!

[@KurtZoglmann]

As a software developer, I found this video mesmerizing. Awesome presentation.

[@jamesplotkin4674]

Great trouble-shooting skills, of course! This is a gorgeous radio and would likely cost a lot back in the 1930's Thank you.

[@bobsykes]

Your videos are amazing in the sense that you do this, so I don't have to! I'm impressed with the care Westinghouse took in this design around the power supply and RF. Yet somehow they tolerated such horrible loudspeaker drivers, in contrast to the effort that went into making everything else as good as they could. I always learn a lot, and am reminded of fundamentals, watching your videos. Thank you!

[@petersvan7880]

Awesome video, thank you! Also nice to see 3-gang variable capacitors radio's, not so common here in Europe :)

[@charlottejet4338]

Thanks for sharing, Paul. Yes please do the alignment 🤗

[@QuaaludeCharlie]

290 Volts , Man that could really put the Hurt on a Person , Having the Schematics was invaluable and , you being so observant , Great content , Thank You Sir . :) QC

[@greggaieck4808]

Mr Carlson your old radio Receiver is cool

[@greggaieck4808]

Mr Carlson iam thinking about getting my ham license

[@wansolve2036]

Wonderful video, thanks so much for putting this together ! If you decide to do and video the alignment, I would absolutely watch!

[@markphilpot4981]

Sure would like to see a full restoration and full alignment of this radio. The cabinet is very nice on this one! Good job!

[@blunite545]

I for one have no problem with your videos being long. Thats more information for us. Yes i would like to see the alignment for completeness.

[@ebb2421]

good craftsman tools with the life time guarantee...outlived the company...

[@ixionn563]

Wow that was an hour long? That felt like 15 minutes! Entertaining video as always Mr Carlson, I learn more every video of yours I watch. Thanks!

[@SnjegovicDanny]

great to find someone that loves old valve radios ... please keep up good work I love to learn more

[@robertcalkjr.8325]

Thanks, Paul! Nice troubleshooting on a gorgeous radio!

[@stevendonovan9762]

Watching you is a bit like when I watched Bob Ross and the Joy of Painting. I'll never get as involved but it sure helps everything relax. May you continue to share your gifted knowledge.

[@davidmiller4594]

Just wanted to say thanks for doing these KZbin videos. I've been binge watching them and trying to keep the political videos on KZbin at bay. You also inspired me to get into Amateur Radio. Started an online study and joined my local club as well as the ARRL. I'm already part of your patreon for your electronics course. 2 bucks a month?! I can't go wrong with that. 😎

[@barrybogart5436]

Nice job. Your intuition is amazing.

[@midjetville]

Wow, a B+ lead up in the dial lights section. I probably would have gotten a hell of a jolt from that one. Nice catch... never know what you're going to find in there!

[@johnvaldez8830]

You can never be too careful...old radios can pack a pretty strong punch

[@ronrodgers6531]

I would also love to see the alignment with your very detailed explanation. When I was a young tyke, the old feller next door gave me a Zenith tombstone radio. I used it for years and is currently resides in my "museum" downstairs. I have in my plans to restore that old gem and donate it to his only grandson. I hope he appreciates and enjoys that old radio as I did when I was growing up. I used to listen to the shortwave bands for hours on that radio. Cheers and 73 de N0YCX from Union, Missouri.

[@alancoepman5210]

Yes, I would like to see you bring back all your projects to life and repaired.

[@davearmstrong1932]

Anything that you show and teach me is to my benefit. An alignment would be good

[@mikejohansson6711]

I love your old equipment lab. That is a very nice radio that old Westinghouse. God bless and thank you for a great video.

[@johnfish1194]

OH man, just seeing this cool radio gave me a nerdgasm. So very cool and retro.

[@TheBurndreds]

Mr. Carlson... Your My HERO!

[@muddysledge]

Man... You come up with the most beautiful radios to show us. Much appreciated!

[@josephrogers5337]

Love this old radios. Must have been in the Niagra Falls area as some the orginal power was 25 cycles. Would love to see this treasure perform at its peak. Go for it. I remember some of the old Cathedral case radios of the era. My Grandmother had an old motorola table top and would always listen to the Gene Autry Show. If you listen in bygone tlimes your might hear Stg. Preston on the Challenge of the Yukon. I love those old radio programs. It made you see in your mind.

[@Ziggysprints]

A beautiful radio, nice that the dial was in great shape. Watching alignment is never interesting but I'd love to see you do this one. Great work.

[@deankq4adj125]

I would love to see how you do an alignment on this great, old radio!

[@angelocioffi152]

Excellent repair. I am currently working on a 1936 Philco model 650X radio. Tons of old wax capacitors!

[@iaroslavblagouchine7007]

As always, a video of a great quality and a very rare receiver!

[@luisdardis5223]

alignment!! alignment!! alignment!! alignment!! pls pls pls !! and a view of the radio closed in the dark to see the dial colors working on each switch change!! ty and really really nice video tutorial!!

[@genestatler2514]

That is a beautiful old radio and I would love to watch you do an alignment on it.

[@jessemontano6399]

Good morning, Prof Carlson. Love vintage radios... Great video, man .

[@michaelmontgomery5818]

So glad to see you with another vid! We have to get you to a million subs!!

[@JerryEricsson]

Wow, man I was so happy to see another of your video's to pop up on my KZbin! I always look on your video's as a visit from a good friend, and at the end, always seem to be a bit sad that your visit had to end so soon. What I gather from these, and I recall from growing up in the 1950's when radio was much more popular then TV, in fact our old farm didn't have electricity so TV was pretty much a dream, something we would encounter when we went to visit rich relatives. The quality of the radio of the past was much better then the junk they throw together today and their sound was so rich and full of life, unlike today's tin coming from the transistor sets, even a fairly expensive radio today has to fight to come up the the class of an old American 5 set of the 40's and 50's, and the quality of that sound coming from a 30's set when radio was indeed the theatre of the mind, well it sets my heart beating a bit quicker as I recall those old radio programs played over the used sets dad would bring home from a farm auction nearby. I did sell off some of my old back room clutter on Ebay, and found there was still a market for some of it, so I managed to renew my Patreon to your site, it is wonderful to be able to go back and see the things I missed over the months I have been absent because of a credit card that I cancled even when it was the host for your site. My good wife of 50 years is doing our budget and when Workers Comp unexpectedly retired me,, cutting my paycheck in half, we went through a bit of an economic depression that we are just now sort of climbing out of.

[@davidfountain6607]

Thank you for another entertaining and educational video. I for one would like to see the alignment for this radio, being it has the multiple bands it should be something a little different.

[@rolandbernold8004]

Neat, efficient troubleshooting and simple repair, Paul! I would love to see the RF alignment on this Radio Receiver.

[@jimallen9442]

A licence to receive a signal, sounds almost criminal, BBC.

[@gtb81.]

lmao, nice jab

[@geirendre]

We have had to pay an annual license fee to our government to finance state radio and tv. Always been like that since radio started in 1924. This was terminated this year (2020). This helped keep at least the national stations free from all those braindead commercials...

[@basinstreetdesign5206]

Most governments (including here in Canada) wanted to control all frequency generating equipment during the big wars as there would be modulation on those generated RF signals that could be picked up by spies. Since all superheterodyne radios had an internal oscillator then that fell under those rules. Not so the TRF sets.

[@wsg4847]

@Wallace Well, you have CNN NBC ABC CBS PBS all spouting the same propaganda. Maybe you ought to try occasionally hearing an alternative view.

[@hestheMaster]

A license to get radio reception legally. Bet that wouldn't last a second in USA. So they tax the electricity here instead!

[@brianwood5220]

Great fault finding Paul. I would definitely love to watch the alignment and clean up process. Hope your staying safe.

[@Danni-5]

Don't know why, but I always find the alignment fascinating. So please do one