Electronics Workbench Build - AIXUN T420D with some mods!

Link for the solder iorn !
s.click.aliexpress.com/e/_Ev3...

[@BCDTech]

Drill for the 7th pin. I am using this way on the t380. By the way t115 has 20k resistance on pin 1 and 7th. 7 is middle

[@bobweiram6321]

You can remove the pins by desoldering the pin and pushing it out of the housing.

[@JFIXX1]

I needed a soldering iorn to fix my soldering iorn 😅

[@nazertrifis3042]

i'm waiting the repair videos 😋😋

[@JFIXX1]

Coming very soon now I have some equipment!

[@bobweiram6321]

I love repair and modding videos, but I don't subscribe to channels that predominantly feature tool reviews. I normally just search for reviews when I need one.

[@JFIXX1]

@bobweiram6321 Thanks Bob! My channel will be a repair channel but I am completely new to this and had no tools to start any repairs I'm just getting set up I am just sharing my journey as I go

[@neverendingstudent]

For the T115 6-pin vs 7-pin: I just checked on my model and my right-side base holder does have a 6-pin female connector to connect to the 6-pin male connector of the T115 handle. I did have an issue with Aixun at first where they sent a different tip-cleaner than I ordered (I received the metal bristle thing instead of the brass wire with splash guard). It took a bit of back and forth with Aixun, and at first they sent the wrong part (the white plastic connector to join the two handle holders), but after I sent them pictures circling and pointing to what was missing they sent the right part. I'm pretty sure the problem is due to computer translation from English to Chinese.

[@JFIXX1]

Thankyou that helps a lot ! So it was the station not the handle that was the issue ! I did suspect that but as you say sometimes the communication is a problem