Voice Recognition Module - 254 Voice Commands + UART

[@ELECTRONOOBS]

Arduino Course LEVEL 2 (Spanish): bit.ly/2ZNWgqy Follow me on FACEBOOK for more: facebook.com/Electronoobs Help me on Patreon: www.patreon.com/ELECTRONOOBS

[@lio1234234]

I think the i2c would be for use with something like a raspberry pi

[@harrywhite7287]

@@lio1234234 I2c is just another serial port with a specific com protocol. It can be used to communicate with anything that speaks its language. The nice thing about it is, it only require 2 pins and can be used in a multi-drop configuration so it's easy to create small (Master/Slave) networks. Down side is, it's designed to be used physically close to the other players on its network. You can hang a bunch of I2c sensors on the same two lines.

[@rklauco]

Any chance you can publish your code on some git repo? I'd have some minor tweaks to enable also ESP8266 support...

[@angelfernando8954]

could you help us telling us what your turn_off_all function does?

[@adnanhassen296]

The code I need it

[@cometmace]

I like that you show a prototype of the robot -- just a string of LEDs to confirm that each of the robot commands is being recognized.

[@darkman19693]

I looked into those Pokit meters. But i eventually got myself one of those newer meters that have a built in screen. So nice not having to find my phone to use a meter.:)

[@coolthought8456]

255 command! There are so many possible combination with 255. Really cool.

[@ahmadkadahsalim5048]

Like always, U did a good Job , but now better as before

[@gerardsayomac1905]

good day sir, thanks for this video. i would like to share that i encountered loading problem during the train phase. I successfully trained 4 voice commands but i can't load them. like using the following command: load 0 1 2 3 after entering this command, no one has been loaded( 0 loaded) hope anyone here can help me. thank you. Godbless

[@elishaniyoshima530]

Did you find the solution?

[@m.rahmadhatulzikra1789]

Your KZbin channel helps people who are just learning voice recognition, I want to ask a question about how voice recognition can control dfplayer mini, one command to play one song, please give the answer

[@FixTronics]

Beautiful module and excellent explanation Thanks

[@SatishSharma-ff5ug]

Indeed

[@thatgeezeruk]

Woooooooow weeeeeeee I love it...you have a new sub

[@GnobarEl]

As always, another great video! One of my projects for 2022 is to make a companion robot for my kids. A Robot to tell the time, jokes, so on so on... If you do one, for sure I will follow all your videos to build it! Please, do it! :) For now, I already bought the module, it's really powerful! Thanks for sharing!!! Have a great year!

[@amphibiland]

How's your project going?

[@TheStuartstardust]

Anyone know the IC used on the board? Can the black gue be removed somehow to reveal the chip? 🤔🤓

[@madhavaraop8787]

Good project from Visakhapatnam 🇮🇳🇮🇳🇮🇳

[@CaptZenPetabyte]

This is BRILLIANT, thanks so much for sharing! Looks like this will assist with a couple of my projects as well.

[@pokuanchoo4180]

Good idea and simple. thanks for sharing

[@scottmorgan5370]

Great video on a really cool module... Thanks friend....

[@electronic7979]

Nice product

[@SmoothTalksFootball]

Awesome you just help me with my project

[@radusdirect]

very well done. thanks for the tutorial.

[@Keeping_IT_Simple]

Very interesting & easy to follow guide to this board ... Think I'll add one to my next order ... Quick question...if you don't mind ? You say it can accept 254 voice commands but the specification on the listing says 80 - which is it please ?

[@saadyusuf6773]

I think you are making Jarvis.

[@TradieTrev]

The aliexpress sales page says it can only do 80, but that's plenty enough to locally control a house without needing internet.

[@mikel9292]

It can only store up to 80 voice commands, not 254. You can cleary see that in the aliexpress product page, and also the parameter for the"record" command, is a number between 0 and 79, giving the total 80 voice commands. Please, update the video title, it's giving misinformation.

[@Mattiaeragiapreso]

The version he is using is v3.1 while the link he provided is to buy the v3.0. I found the 3.1 on ebay but I would l to know if there is another way to buy it, maybe cheaper.

[@mikel9292]

@@Mattiaeragiapreso The 3.1 version also has 80 voice commands.

[@arasha2547]

You are the best human on earth You provide these projects for free to us electronics enthusiasts. Nice to meet you You are my best friend. I wish you success and health My best friend

[@bluebear8741]

I have questions: Can you change the text to speech voice to a different one? Can you plug it into a portable power module? does It need to be plugged into a computer for it to work?

[@adipurnama_workshop]

thank you, very informative

[@yousefmohamedsalah3277]

Make a video about using a voice recognition V3 with a program access port137

[@h240481]

Ahhhh If I could submit 1000 likes at once. You are outstanding man.

[@arasha2547]

I'm still waiting for the code to upload

[@ashir3022]

@Eletronoobs Sir please can you share final code for controlling led?

[@ivovass195]

Very nice little device. It has given me some home automation ideas, thank you for showing us how it works. Cheers for the new year

[@Just_Shorts_Here]

Hello I'm using this same module once i started training the voice but by mistake i trained 2 in same sigtrain after its showing timeout error

[@mjyanimations1062]

I'm just not a fan of the fact that the ic in the new version is in a COB package.

[@lumsdot]

tempted to use thia with my esp32 internet radio media player, not sure how well it will work from a diatance and ahilst music is playing

[@yapdoit8077]

Could be better if you show us the screen in closer. Btw good job. Thank you for make this and share.

[@deepeshmeena752]

I am from India and you speaks like a cute boy and I like it.

[@AnandhajithR]

For every command it is showing timeout.The only functioning command is 'help'. How can I fix it?

[@elishaniyoshima530]

Dd you check for tx and rx pins??

[@A3dprintedman]

This looks awesome man! Way to go! Can you make a video explaining the parts you used and how you made the library? I’d love to see your design process

[@electrical-sajid]

Hello sir I want your help in one of my project. Can you pls guide how I can detect sound in the electrical panels ziiiii like chirping sound in the electrical system.

[@arasha2547]

You promised to upload the code I have not slept for 2 days 😭😭😭😭😭😭😭😭😭

[@lexander9686]

Nice

[@SilverbackStudios-pk3pq]

Sooo cool

[@pokulan]

Ok but does it save the commands in flash? Or it will reset after power cycle?...

[@divyakhetan8754]

I wad following the same way u said ... But while loading the voice it says voice untrained.... Can u help me what to do next

[@elishaniyoshima530]

Am facing the same issue Did you get the solution

[@MsFireroll]

Hi, thank you. Do you think if it 's possible to use this module to reconize a number between 0 and 100?

[@albertogregory9678]

You can only max out at 7 commands a group, so you would have to do something like “Get a number from 1-7” “6” “Get a number from 30-37” “32”

[@adespade119]

impressive

[@MatSmithLondon]

This looks good, but I suspect people will compare with natural language processing systems. Does this require that you don’t slur words together? Must the user know that commands should be fully separated with a tiny amount of space? It seems a shame that they cannot include double the amount of storage / analysis buffer ie 3000ms. Interesting video though.

[@flethacker]

You can do voice recognition on a $15 raspi pi zero and have a much larger set of commands and NLP routines as well text to speech. Though this module is super simple to setup and integrate if thats all you need

[@SatishSharma-ff5ug]

Please share it...

[@SatishSharma-ff5ug]

or give a link..thanks

[@Rainer_Landes]

offline voice recognition? Without sending any data to Alexa or Apple or whatever? Can you please give some info where to find such a solution! Thank you! I would be really glad!

[@leehewitt9559]

Fantastic my friend. Have a good Christmas and New Year. Look forward to the videos 👌👌👌

[@isaamthalhath4359]

Dude i literally was just building a project with this lmao

[@jeffg4686]

nice!

[@rklauco]

Looking at the specs, it would be great if it worked with 3.3V instead of 5 - would be usable with ESP8266 - connecting ESP to MQTT and you have wireless voice assistant in any room :)

[@AllTernative90]

I was thinking the same. But an Esp32 should have 5v, right? That would work I guess.

[@rklauco]

@@AllTernative90 5V power is not the problem - the signal levels on the serial interface are a bit of an issue. ESP (both 32 and 8266) is not 5V tolerant on the input pins, so providing it with 5V TX signal might fry the chip. There is level shifter option, of course, but I am 99% sure the chip on the board also works with lower voltage than 5V. I'll check it as soon as it arrives - already ordered :)

[@AllTernative90]

@@rklauco Ah I see. I'd appreciate it if you could keep me up to date, once you tried it out. :)

[@rklauco]

@@AllTernative90 So, the module arrived. Tested it with ESP and it has a problem. It does work with 3.3V, but it was getting resets as the lib is written for arduino and uses while loops without yielding back the control to ESP, therefore causing WDT resets. I was able to fix it by inserting yield(); command at line 106 and 200 of the VoiceRecognitionV3.cpp file. Since then - no problem at all, works like a charm. I've tested using SoftwareSerial connected to D6 and D7 of my wemos module (IO12 and IO13 on ESP). Works OK, training it now :) I'll have to write a code for it to send MQTT commands, but this will be perfect - I can put it to multiple rooms. My start command, btw, is "Hey, Jarvis" :)

[@AllTernative90]

@@rklauco Thanks for getting back to me and giving all the details! Could you do me a favor and test if it can also recognize sounds like a doorbell? Or does it just work with more vocal sounds? Thanks again!

[@homeautomationmadeeasy3276]

Can it understand commands indifference accent if only one accent is trained with

[@AFSMG]

Hola genio. Feliz año. Tienes esto en español??

[@marios_ideas]

You probably get hundrets of questions like this. I have a channel with Arduino contant. I am monetised but it is not growing as I would like. Not saying that I am loosing my faith but I would lie to know what avarage watch durations you get on your videos. My tutorials get 25% to 40% and I do not know if it is decent result on the technical channel like this.

[@chinonsoemmanuel1906]

This is a nice project. Can this be used to recognize music? Say I sing a song correctly, an LED should come on, if I sing it wrongly, nothing should work, maybe a red LED.

[@fernandopalacios5656]

Hello, I have a question, do you use Voice Recognition Module - 254 Voice Commands + UART with raspberry, I have migrated some projects from Arduino to Raspberry, Will be this case?, i am interested too, add commands to smart car or others apps

[@UAVdieren]

Hi, great video. We all want to know what the range of the microphone is!

[@xGARIDx]

Can i record my language ? not English and common language

[@suspense_comix3237]

Yes, but what are the other pins for? Just want to know in case they are ever useful or anything.

[@qcnck2776]

Hey noobix, like this video!😀

[@jasoneldrick840]

if anyone have a timeout error do this Click ctrl F and search timeout it will pop up then go 7 lines up u will find this line "if(ret >= 0)" change the 0 to -0 that's all the base code is wrong hope that works if u are wondering im just 14 years old i am not an expert

[@belaidabdelhadi]

HI , I'm interested in the code , i liked the way implemented the combination of commands . can you share the code ?

[@AtomkeySinclair]

Guess you could run several in parallel all receiving the same audio, expanding any given moment by multiples of 7 commands. A robot that had a directives list for example will probably have the need for more than 7 commands at any given moment, having all N commands at ready would need multiple modules all listening. Whichever one gets a pattern match first would then send the data over UART. Now you just need a way to funnel all the UARTs into a single command processor.

[@SmallSpoonBrigade]

Possibly, but if you need more than 7, you probably want a more powerful system.

[@AtomkeySinclair]

@@SmallSpoonBrigade Ideally you're right. I don't know of an embedded version that is capable of more. The next step would be something like a Raspberry PI running software I suppose...

[@adespade119]

running on i2c that might be possible, since each module would be listening for its own 7 commands. Pretty good idea

[@AtomkeySinclair]

@@adespade119 Ideally this will just evolve into more complete system. A voice module that either supports expansion, or the software equivalent of FPGA that can compile and run on something like an ESP32. Thanks for commenting!

[@hackerr2656]

voice recognition module v3.1 arduino uart 2022 version serial robot commands alexa google home iot automatization microphone ai robotics: good keywords

[@edwardnihal248]

How far away you can be from the microphone and talk normaly so that he can catch your commands?

[@edwardnihal248]

Oh, don't give me that heart and be ignorant, give me the answer.

[@joefreynabua4135]

Wow amazing can I ask how did you group the command did you load first all command before you group it

[@NOORIRFAN-p9b]

someone help me i found that when im using uno board it's okay but when use esp32 the board doesnt"t received serial data from vr board it just can train voice but cannot command to the esp32

[@msaadzafar-q2o]

i successfully trained the command but unfortunately i cant load it。please help me out 。 its been 3 months now i am stuck in it

[@elishaniyoshima530]

Did you find the solution??

[@msaadzafar-q2o]

@@elishaniyoshima530 no

[@2057Ert]

Hello, can we define ambulance and fire department sounds to this device? Thank you.

[@marvelmaniac3339]

Hi... great video. How would i use the voice command module to hear a keyphrase or word and reply with a prerecorded wave file thru an onboard speaker?

[@Lola_003]

Hey thanks so much for sharing. I followed the steps and when i tpyed " train 0 " and entered, "speak now" didn't show up and instead it said " train time out" what should I do to fix? I have no idea what to do now

[@AnandhajithR]

Iam having the same issue. Not just for train, for every command it's saying timeout, the only functioning command is 'help'. Did you fix it? If did, please share how to fix it.

[@Rundik]

Why not just use raspberry-pi-like thing and get full voice recognition? Is it only about power usage?

[@homeautomationmadeeasy3276]

Can it it be trained and recognise clap sound?

[@user-js5mz9bi1j]

Hola!, would you please help me understand better with the code, please? thank you.

[@tanujohri9969]

please share your code. i really need it very bad because i am working on a project, so need to see the coding part. !!!!!

[@drengrd]

It means that your only the one can do a command on this device? Your family member can't do it because their voice is not recognized?

[@AshutoshKumar-fu6qe]

Are you sure that's voice recognition, or you want to change title to speech recognition?😅

[@MrFernandoBedoya]

Hi; excellent video, thank you so much for sharing to. I'd like to control a tool with my voice, however I wouldn't like to do a full Arduinno course. Is it possible to complete this project without having Arduino knowledge?

[@snopz]

can we record a request like if i want to do a chat gpt robot i will say the wake word and after that i want the module to record what i say after and then when i say im finished the arduino send this voice to a speech to text api and then removes the record from the module

[@hansnielsen1989]

what about another country (Official language)?

[@cantaldianebernadetteo3256]

can you send the version of the code for ESP32?

[@govardhanmuddapati8834]

do not save the commands when loss of power supply how can store the commands in this module

[@MayoresJhayveeH.]

Man, I wish I have the money to buy this module. Haha

[@Sixthflyer]

Great video and very nice module. Does the library work with ESP32?

[@waleedsyed]

I have the same question

[@geeknupthenight7417]

Will there be one that can have all 254 commands at once?

[@danieltorrenstortosa9903]

Hola desde España, estimado ElctroNoobs, le digo, tiene muchos seguidores desde España, pues sus vídeos son, además de instructivos e interesantes, están realizados de forma muy pedagógica. Permítame solicitarle que, este vídeo de "reconocimiento de voz", lo pueda realizar en castellano/español, ¿es posible?, gracias

[@easy_3d]

Can you make a video on connecting this setup to Arduino Uno rather than Arduino mega?

[@ariellihan999]

GUYS, quick note here. I actually tried this on mega because I have a project using the voice recognition module in arduino mega. You guys need to connect pin 10 to tx and pin 11 to rx not the other way around. Ps: But if it works for you then I guess it's fine. Just that mine doesn't work when my tx is 11 and rx is 10

[@toysforboysrc]

There’s a Movi speech recognizer and speech synthesizer board that technically also do the command. Either by closing a circuit or pwm. Not sure yet, I have not gotten deep into it yet but some of the Amazon reviews I saw were quite advanced and capable.. “the R2D2 video” but that board will be plenty to meet my needs in a 1/7 scale RC car application. Lights, fans, blow flames, start engine or engine sounds, music, and just conversation. What I’d really like is if u can also have it read out live Lipo voltages and motor temps and ESC temps. Would I be asking to much for gps/mph and G force lol?? Anyhow if you have content or experience with that board, I’m definitely going to be looking for it as I look at most of your videos!

[@KamalaDevi-zt3xu]

i have doubt whether we can connect the voice module without arduino board.? Please clarify.

[@Keeping_IT_Simple]

hi any chance you can please put your example code online somewhere so i can replicate your hey noobix led demo to help me understand how to control this device also you show in the video that the 3.1 can store 254 commands but the documentation states it can store 80 - what is the correct figure please?

[@loptica62]

love the POKIT..... do you ship to Serbia? Oh, and one more thing, would like to see a dedicated tutorial about using the POKIT... BTW just curious, are you part of the crowdfunding 'pokit' project ?

[@ranaharsh365]

Great....

[@berbagibaik]

What its can using other language of voice

[@lovgomas]

I'm working on a voice control of lights. In the setup I use: myVR.load(uint8_t (0)) to load the recorded commands, but it only works if it is connected to the pc; with external power does not load the commands. any suggestion. Thanks

[@lernenmitrobin]

great

[@kdawgin]

whenever i try to write a command in the serial monitor i get an error. For example if i type "record" i get a error message saying "Check record failed or timeout". or if i type "settings" i get "Check system settings error or timeout". My connections are correct i believe. Anyone have an idea why this would happen?

[@stevenedwards408]

Hi I've managed to implement one of these speach recognition modules into a project I'm doing but the recognition is so hit and miss yours seems to work flawlessly and I can't understand why mine doesn't...any ideas?

[@faugetentertain]

i can give the led control command for this

[@DanielTorres-bs8dx]

would it be possible to add the code that was used in the video to your website? It would be great to have it and change variables on it so it can control what suits my application. rather than writing everything again. especially since in new to arduino writing arduino code. thank you