Elevator / Lift Simulation Using HMI Mitsubishi GOT2000 and GX Works2 PLC Software FULL (PLC + HMI)

elevator simulation
this video will explain detail step by step how to make elevator PLC program and HMI
#elevator #hmi #simulation #mitsubishi #plc #plcprogramming #omron #kvstudio #siemens #schneiderelectric #allenbradley

[@hoeurnpa5324]

I like for you lessons video 🎉

[@automationliker]

Thanks for watching this video...

[@khairulefendi8176]

I've tried it directly on got2000, but it doesn't work, there's no movement from the lift, do I have to use a script?

[@automationliker]

1. Check your communication configuration with PLC 2. On 25:37 change maximum value from 100 to 10.000 (100x Higher) Change Value Comparison 100x Higher too.. Ex. Before : > D1 K19 after : > D1 K1900 Do that thing for all comparison... That because Increase data too fast if we use Real PLC and GOT

[@tintran948]

Great video! This help me a lot, but I'm wondering if I use hardware instead of simulation the code for the elevator would be the same?🤔🤔

[@automationliker]

There's a little difference if you want try for real Elevator/Lift... 1. You must Change D0 and D1 with Output Y For UP/Down Elevator.. 2. You Must Add Limit Switch Every Level Elevator and Use X address

[@user-mc7cz8yc2f]

​@@automationlikerthanks alot

[@oryxengineering4383]

Please make more vedios

[@automationliker]

Ok.. Thanks for watching this video...

[@Tech11kv.]

What meam of Level 3A Door

[@automationliker]

Level 3A = Level 4

[@lamng.156]

sorry sir , could you give some info about this project ? i also have a related project with lift . thanks

[@automationliker]

This is Lift simulation project like real lift, if you push floor button, lift will move to that floor.. Ex. Ground floor

[@lamng.156]

how can i contact with you ? i would like to ask you more , @@automationliker

[@lamng.156]

@@automationliker could you gimme some file of this project, i'll pay

[@automationliker]

@@lamng.156 i'm sorry i can't, You just watch full this video... In this video PLC program and HMI have been explained in detail.. You can follow program PLC in this video...

[@jagahati-ww6hp3fw3q]

how to learn this PLC for beginner

[@automationliker]

See my playlist JOB PLC Exercise... That PLC exercise for beginner.. Maybe you can learn PLC from that video...

[@jagahati-ww6hp3fw3q]

@@automationliker ok thanks

[@user-be4rr1ie4i]

where are you from sir?

[@automationliker]

It's Confidential and Not important...

[@iprincesah]

Please give a link for download Comment File

[@automationliker]

This video maybe can help you kzbin.info/www/bejne/qqWup5uvgtJjftEsi=0AhyEwJEh3oDIGBr

[@iprincesah]

​@@automationliker I need comment file which was used in this video Not the video link for how to upload comments 😅

[@automationliker]

You just make comment manually one by one