Rebanded Motorola MTS2000 Flashport 800 MHz - Operation, CPS and Programming

[@AlucardRacing]

How did you get acsess to your county’s type ii trunking system just wondering

[@Elfnetdesigns]

Well I am one of the few people who service and maintain the radio system.

[@AlucardRacing]

cool thanks I always enjoy your videos keep doing more

[@usstexasbb3555]

Hi elfnet thats a cool radio you got from ebay

[@jimgiacoletto6612]

Excellent, thanks for the good information.

[@RoyanGreenwood23]

Will a cheaper rib cable with a cheap rib box work? The real stuff costs too much lol

[@Elfnetdesigns]

It will but like any knockoff you take a risk.

[@AndrewMurphy8383]

good videos i was wandering if u know of a good video on youtube to program motorola p25 radio

[@Elfnetdesigns]

All i can recommend is do a youtube search on it. I don't have any because the p25 systems here are kinda classified (the people at the state police asked me not to cover their systems programming because they have unlisted talkgroups for sting ops and drug busting ops) so I just don't make videos on p25 radios or programming, to keep things in the green with law enforcement and people I work with. You could also check with the r/hamradio on reddit, maybe they know of some?

[@AndrewMurphy8383]

thanks elf i am thinking of using gm300 to use them for my gmrs repeater what is your thought on that

[@AndrewMurphy8383]

i am trying to figure out how to use the id o matic for a repeater controler and how to put pl tone so it dont mess with other repeaters in the area

[@Elfnetdesigns]

GM300's are or were widely used in such application, I do believe most of the Radius line has part95 certification. GMRS repeaters are not required by the FCC to CWID but it is good practice, which leads to many people using those maxtrac repeater cables you can buy off eBay for like $15 that plug into the rear 16 pin accessory port on the radios. I do not know much about the ID-O-Matic. most of the controllers I work with are either built into the repeaters or made by companies like Zetron. If you are looking to set up a single PL repeater (not a "community" or multi-PL) then you can set the RX and TX PL codes in the radios RSS / CPS and leave the controllers PL options to none or open or 0.

[@AndrewMurphy8383]

i am looking to do a pl tone so only people that have the pl tone mostly family could be only one use it i am going to put up my rptr freq on my gmrs for other to use with the pl tone. do the tx pl tone have to be the same as the rx pl tone for that to work? and do they still make the zetronn rptr controllers

[@crazydayzrp7169]

Legit needing a guy to just do this for me seems to complicated for a simple minded creature as myself haha would you be interested in making some money and setting up my 4 radios for me?

[@Elfnetdesigns]

Are they the same radios as in the video? If so I would not need batteries or chargers shipped as I have all that. I will need a few things though: 1. What city, county state? and if you have permission to transmit on that system 2. If you have a previous radio that is already set up I can use that to get the information to program the others. Conventional programming of 1 zone of up to 16 channels or 1 trunking system with up to 16 talkgroups - $50 ea Shipping back to you would be USPS medium flat rate - about $14.

[@crazydayzrp7169]

ElfNet Gaming email me [e-mail] and yeah mts2000 flash port exact same radios and I will give you contact info after u email me we can phone call chat about it and kinda what I need and looking for.

[@five5masters]

@@Elfnetdesigns could you shoot me an email? I'd like to utilize your services please. [e-mail]