ELM Config Ford Mondeo 2008

[@bomba05]

Thanks from Germany.. That was very helpful and now I have Bluetooth audio. I was in 5 Ford workstation and no on can't help me.. Now I have make it self because of your help

[@Stefan-sj9kq]

glad to help

[@kalekotube]

Hello Stefan, many thanks for sharing the complete procedure of an elmconfig-session in a commented one shot video. You really helped me to prepare this step by step without beeing forced to figure it out in "Hot-Mode" in the car. Useful Work Mate! One additional suggestion i have to you and other users. It may be useful and more safe, to make a backup of your pre-changed settings, after reading CCD from BCM, by going to "Central Configuration" and choose "Save CCD to file". This lets you keep a copy of the data on your Notebook before changing and eventually messing up anything. This step should be done at 3:38 of the process, just before the reconfiguring of the setup.

[@Stefan-sj9kq]

yes my friend after the video i was maked a copy

[@ZorgR]

It would help to say what this is actually about - in the title or description or at the beginning of the video

[@maxjarno7814]

Superb video !

[@Stefan-sj9kq]

Thx ...a old video :)

[@VerlaidenPL]

Got it to work, thank you!

[@MrRatedBest]

Love your english 😁

[@paulappleton6816]

Can you add DAB radio to the sat nav using this. I have recently upgraded to a Ford sat nav on a MK4.5 from a Sony dab unit. It only has FM radio now. I have managed to get the BT audio back and NAV option to the converse+ Oh and my voice control has stopped working? 🤔

[@Stefan-sj9kq]

DAB radio u cannot install...and for the voice,u changet the radio with blaupunkt NX?

[@paulappleton6816]

stefan costea hi it’s the Ford MCA unit

[@Stefan-sj9kq]

@@paulappleton6816 oooh i think is the same like models FX ,NX the only fix,u can do like in my video..(form 0.53 sec.) kzbin.info/www/bejne/e6DEZHlvZZtqjbs

[@tedyciprian123]

Ford mondeo 2007 keyless nu pune contactul idei rezolvari?

[@tadasyou]

And is it possible to activate usb somehow to play music over the usb key?

[@zetecse2894]

How did you do the convers update with elm327

[@tomasbickauskas385]

Hi, I change BT module with BT music streaming, but I can connect phone. Did you know how resolve this problem ? Which Elm program you use it? Because when i try ACM modules reset something wrong and cancell.

[@jaromor8808]

-Also it seems your switch has three positions, is that correct?- Just read elsewhere that MM and HS are actually on the same HW-CAN.

[@16426333]

Stefan i have ELM 327 500k designed for ELM config-Forscan i can see informations BCM like you do on 2:13 but when i try to read Procedures read from ccd from bcm i find err mesage : Incorrect response from adapter to request .AT LO. STOPPED .. can you help me ?

[@Stefan-sj9kq]

install a old version,open with admin.,swich the buton of the elm try this

[@16426333]

ok the problem is chip who dont go faster then 38400 . Stefan pliz can you tell me what speed you have if you go on Adapter setup and then Open port ?

[@viesturs69]

Hi Stefan! Before this Baupunkt unit you had Sony radio with separete climat controll, when you installed Blaupunkt in your Mondeo, it was necessary to make some changes in ECU,for to rekognize new unit ? Thanks!

[@Stefan-sj9kq]

if you have Convers + to show the navigation on the display ,you must set ,Radio navigation,something like this,i don`t have this unit any more,i have a china unit kzbin.info/www/bejne/nXqtmHZunrFqm9E

[@viesturs69]

okay, thank you!

[@Killer-lo3ig]

Salut! Poate această interfață să scaneze erorile de la modulul de control al farurilor cu xenon? Am pe bord eroarea Headlights malfunction iar autolevelingul nu functionează.

[@devanandgovindshetdessai4063]

Hello friend..... Can I code injectors on ELM to ford diesel cars?

[@alexcozma6106]

Salut, Ce diferenta este intre BT/VC High si Low? Am radio-ul obisnuit cu cd de la sony (cel negru) si o mufa usb in torpedou, am achizitionat modulul cu codul 19C112, inainte avandu-l pe cel cu 19G si as vrea sa fac cu elmconfig imperecherea, dar nu stiu ce sa aleg intre ele. Ma poti ajuta, te rog?

[@Stefan-sj9kq]

pff este un video de mult, cand schimbi casetofonul cu unul care are si butoane de clima este cel de la Blaumpunkt NX model uita-te la tot ce am pus eu acolo si afli tot nu mai am masina.

[@derhaselinus5528]

In my S-Max (2007) is the NX radio installed. If I install another radio (radio with CD), can I configure the new radio with the ELM-Module?

[@Stefan-sj9kq]

i dont´´know,only nx radio i think

[@TomySTS]

Salut, care e mai bun? ELMConfig sau Forscan?

[@vikendpecaros8403]

Great video, I have a similar situation. I have installed android multimedia and now parking sensors are not working. I need to use this procedure to make it work again. Did you have the same issue with parking sensors?

[@Stefan-sj9kq]

my car do not had sensor parking..

[@vikendpecaros8403]

@@Stefan-sj9kq did not have at all or you lost the function when installing the nav?

[@Stefan-sj9kq]

@@vikendpecaros8403 it did not have..

[@vikendpecaros8403]

@@Stefan-sj9kq Thanks for the answer.

[@premyslhruby9095]

Hello Stefan, can you let meknow whre you did downolad a TXT file with a sequence description? Thankys

[@Stefan-sj9kq]

was a long time,but i think on a forum ,ford uk,or similar,i don't have ford any more ...

[@XiiLLy]

Can you also do all this with ELS27

[@Stefan-sj9kq]

i don´t know maybe

[@salajancalin78]

Salut !...de curând am cumpărat un Mondeo 2007/2008...am exact modelul ca în video...de ce când apăs butonul "Phone" nu se întâmplă nimic?...as vrea măcar sa pot conecta telefonul pentru convorbiri...

[@Stefan-sj9kq]

in primu rand vezi la bluetooth la telefon..daca iti apare sa te conectezi cu masina...daca nu ...nu aii mdulu de bluetooth...

[@salajancalin78]

Pai nu-mi apare nicăieri Bluetooth... De unde pot cumpăra acel modul...aveți vreun link cu acel modul?

[@Stefan-sj9kq]

@@salajancalin78 ebay...si uita-te la canalul meu ca am un video unde iti spune ce serial sa cauti....

[@goofysito]

and where is the digital speed option ?

[@NEBUNEL28FLORESTI]

Salut, am si eu o intrebare , acest cablu îl pot folosi la mondeo mk4 restayling din 2011 cel cu Convers+...... cu siguranță că ești singurul care a facut un videoclip așa detaliat cu și despre ce poți face cu acest cablu- adaptor ELM.👏👏👏👏👏👏👏👏👏👏👏👏👏

[@Stefan-sj9kq]

in teorie ar trebuie sa mearga la tot ce scrie FORD...acum nu stiu ce sa zic.. am sa vin in tara daca esti din Constanta pot sa til inprumut...

[@danielkatona1866]

Salut, am vazut ca a ramas eroarea de imobilizator activata. Cum scapi de ea ? Se reseteaza dupa ce iei contactul si il pui inapoi ?

[@qfreddie]

Salut. Poti explica ce-i cu modulul acela de BT si USB? Cum pot afla daca pot avea si eu share audio prin BT? Am exact acesta unitate cu conexiune BT doar pt telefon si agenda. MS

[@Stefan-sj9kq]

ca sa poti reda muzica prin usb si bluetooth,,,iti trebuie... 1,un radio sony model dupa 2010sau unul ca in video 2.un modul de bluetooth care sa scrie pe el ,,,usb and voice´´´´ si dupa faci un update la modul si iti va merge si Ipod pe el

[@taniamariairofte7333]

Salutare Stefan .Am un ford din 2007 cu versiune de convers+ 0803 .Te intreb daca pot sa actualizez si sa pun mai multe optiuni? Multumes frumos Foarte buna treaba

[@Stefan-sj9kq]

da poti,sa faci cum am reusit si eu tot atit avea si a mea,nu mai am masina,am alt brand acum.

[@taniamariairofte7333]

@stefan costea Multumesc ca mi ai raspuns asa de repede. Te rog poti sa mi spui si mie cum descarc programul? Si hay que pagar se paga. Multumesc inca o data . Salutare din Valencia

[@lalla4807]

salut ai rezolvat ceva cu sunetul ? am facut upgrade la modul ca sa poata redea melodiile , vede telefonul practic reda muzica dar nu se aude .

[@Stefan-sj9kq]

am un video pe canal meu ,trebuie sa schimbi firele de la aux ,la noul modul uita-te la video si ai sa vezi

[@markcoe8096]

Thank you Stefan

[@jaromor8808]

Could you please provide a link to the ELM-module? I bought mine few years ago, and it does not have the switch. (I know I could probably retro-fit one, but I don't wanna screw-up. :)

[@Stefan-sj9kq]

www.scantool-direct.co.uk/ford-elm327-modified-hscan-mscan-switch-forscan.html

[@jaromor8808]

stefan costea thanks :)

[@salimmetin]

Can anyone provide actual link for ELM-module software? The one presented here is 5 years old and does not work.

[@Stefan-sj9kq]

www.ebay.co.uk/itm/385054200220?mkevt=1&mkcid=1&mkrid=710-53481-19255-0&campid=5338781099&toolid=20006&customid=iqvaFPMRAAAA2hGpbV6uuti-5xwmAAAAAA&_trkparms=ispr%3D1&amdata=enc%3A13COJ7zydQniYTtcBeLrjFA75

[@Deepvibes79]

Hi, can you send me link with drivers for windows10? (ftdi for usb converter- from website doesn't work) Have big problem to connect elm after Windows update.

[@szabolcsarvai4178]

Buna domnu Stefan! Am modelul aceasi, am urmarit tot ce ati facut cu elm config , dar nu apare Bluetooth. Dupa ce am schimbat modul-ul a aparut doar iPod si USB. Se poate sa nu fie compatibil cu masina sau cu radio?

[@Stefan-sj9kq]

[e-mail] vorbim aici..

[@adradrian692]

Romana nu aveai?

[@Stefan-sj9kq]

la ce?!

[@georgiansmeianu5833]

Salut stefan,am si eu un mondeo din 2008 titanium x 2.2l,am cumparat masina acum 2luni si nu imi merge comanda vocala si nici bluetoth ul,cd playerul e sonycu magazie de cd in el.am desfacut torpedoul si nu aveam modulul deloc,am cumparat unu de la novera si comanda vocala cand apas pe buton se aude un bazait si cam atat si bluetooth ul se conecteaza dar nu aude nimic cand apelez pe cnv

[@Stefan-sj9kq]

dupa septembrie 2008,sau facut din fabrica toate legaturile la partea de radio ,masina ta nu le are ,trebuie sa le faci tu sa modifici niste cablurii,iti dau un link cu un video al meu ca sa iti dai seama cam ce ai de facutkzbin.info/www/bejne/e6DEZHlvZZtqjbs

[@georgiansmeianu5833]

Chestia e ca nu vreau sa modific ptr usb,vreau doar sa mearga bluetooth ul si comanda vocala si ma gandesc ca treb cv sincronizat cu ECU masini casa imi mearga,masina are din fabrica comanda vocala si bluetooth dar fostul propietar a dat jos modulul bluetooth si nu am mai gasit nimic acolo si eu am cumparat un modul dupa ebay dar nu stiu sigur daca l-am cumparat pe cel care trebuie..sau treb sa'i fac cv anume la asta,daia te intreb..

[@Stefan-sj9kq]

nu trebuie sa umbli la nimic ,doar firele care sunt in video,cele care trebuie sa le unesti,1cu 5 si 2 cu 6,parca,uita te mai bine in video,este o mufa care este ptr.microfon

[@georgiansmeianu5833]

Deci pur si simplu din mufa microfonului scot firele si le unesc in mufa BT ului?

[@georgiansmeianu5833]

Si masina mea e martie 2008,este model de anglia

[@goofysito]

hi my friend , can u success the autolocking with elmconfig ?

[@Stefan-sj9kq]

yes u can! if u want i will make a video sunday

[@goofysito]

yes , i really appreciate it... the digital speed option too plz ... or just tell me the option numbers and i thing i can find it ...i have a old firmware corver+ It does not matter ?

[@TomySTS]

@@goofysito Did you find how to activate the digital speed?

[@Clasic6]

Salut, cu această interfață crezi că se poate activa consumul instant la convers+? La mine nu este afișat consumul instant și as vrea sa știu dacă se poate. Numai bine!

[@Stefan-sj9kq]

da eu recent am schimbat interfata daca vrei iti trimit poze cu cea noua

[@mariusghiarfas6619]

cum ai reusit sa schimbi interfata si ce noutati aduce ? multumesc :)

[@Stefan-sj9kq]

am sa fac un video scurt am platit 50 euro prin paypal la un baiat din rusia uite pagina lui... kzbin.infovideos

[@16426333]

Your voice controll work ? With nx travell pilot

[@Stefan-sj9kq]

i have Fx now,and yes now work

[@SilviewLoop]

Salut. Poti lasa te rog un link de download pt software? Mulțumesc!

[@HerrMardu]

Salut Stefan! Softul vine pe disc,de la vanzator sau l`ai cautat tu separat? - Multumesc

[@Stefan-sj9kq]

te referi la ELMconfig??nu este gratis..civil.iffc.ru/elmconfig/

[@HerrMardu]

Multumesc.

[@DoctorAuto477AMGservices]

Salut, am si eu o intrebare, ce tip de faruri are?

[@Stefan-sj9kq]

farurile sunt lupe dar becurile halogen

[@DoctorAuto477AMGservices]

stefan costea ai idee ce cod are modulul afs si daca este compatibil si cu farurile xenon?

[@Stefan-sj9kq]

@@DoctorAuto477AMGservices nu stiu ,si masina nu o mai am ,si nu prea mai sunt la curent cu ford,am alt brand acum...

[@DoctorAuto477AMGservices]

stefan costea ok, ms pt raspuns.

[@Albertt.c]

Eu am ELS 327, pot folosi ELM config? Vreau sa codez bluetooth audio pe un Ford Mondeo Mk4. Deocamdata am bluetooth doar apeluri

[@Stefan-sj9kq]

Nu stiu ce sa zic...nu l-am incercat....eu doar cu ce vezi in video am reusit restu nu stiu .

[@Albertt.c]

@@Stefan-sj9kq aaa ok. E bine ca macar am acces la tot fordcan-ul. Din moment ce nu am switchul de la hs la ms can, am un releu dar macar imi fac treaba acolo si am reusit sa codez una alta

[@laurentiunadrag2968]

Salut stefan,am un mondeo mk4,ma poți ajuta cu câteva informații te rog ?

[@Stefan-sj9kq]

[e-mail]

[@AliveGhost13]

Hello my friend. I run read from CCD. Then after removing OBD I getting lots of error codes when starting ignition. Should I clear these error codes?

[@Stefan-sj9kq]

if a error persits,mean that its a problem..

[@AliveGhost13]

@@Stefan-sj9kq I am not sure if persists. I have not tried to clear yet. Should I clear?

[@16farkas]

Dear Stefan It is a great video... please help me ...So I have a MK4 modneo 2011 2.0TDCI 140HP ... I would like to enable the auto locking ... can you help me ? What is the serial baud rate ? And can you write me the right procedire step by step ? THX Regards, Sziard

[@Stefan-sj9kq]

kzbin.info/www/bejne/m6jRdXpmbLuIn68 look at the video and do the same

[@16426333]

hello stefan . in my ford s-max (befor it was sonny in ) i install travel pilot nx from ford mondeo same like you have in video. navi , radio , phone ...works great but voice control not working .. you think that is possible to fixs this with your program ?

[@Stefan-sj9kq]

no i don´t think..because the voice control come out of module bluetooth.sorry i´don´t know how to help you

[@cristianandea9650]

Buna Ștefan am si eu un ford mondeo titanum x converse+ 2010 si as dori sa ii fac updates am cumpărat elem327 dar nu știu de unde sa descarc programul pentru el , ma poți ajuta cu niște informati ?? Mulțumesc

[@Stefan-sj9kq]

www.conversmod.de/index.php?page=conversmod

[@cristianandea9650]

@@Stefan-sj9kq trebuie sa cumpăr fiecare upgrade separta sau pot cumpăra un pachet cu toate , am vazut la tine în video logo mașini, senzori de parcare etc. Tu cum ai procedat ai cumparata tot pachetu?

[@Stefan-sj9kq]

@@cristianandea9650 cand le-am instalat eu ,nu era site asta,le-am cumparat de la un baiat rus kzbin.info/www/bejne/e4mUeGiuhqafadE si de la el iti alegeai ce vreai tu sa instalezi,pe mine ma costat 50 euro...i-am transferat banii prin paypal..daca poti ,alege tot ce poti sa instalezi pe masina ta ca la ford nu iti face nimeni ce fac baieti astia,,si e ceva simplu si bun ptr tine...acum daca ai si banii necesari.

[@cristianandea9650]

Tu mai deti masina ? Putem vb undeva în privat ( fb,whatsapp)?

[@Stefan-sj9kq]

@@cristianandea9650 nu am alta [e-mail]

[@adamjustynafalkowscy]

THNX

[@kowalskikowalski2474]

Super

[@usr62]

First, you need to read the vehicle configuration, which is stored in the BCM module, press the button "BCM" - "Procedures" - "Read CCD from BCM" Further to amend the configuration, press the button "Central configuration" - "Page N", change one of the configuration parameters, go back and write the configuration "BCM" - "Procedures" - "Write CCD to BCM" copy of the configuration is stored in the same module IPC, need to repeat the same thing for this module.

[@16426333]

i have s-max 2009