Here are some details about how to put in the bobbin and ensure correct tension for sewing. Remember, HOLES UP when winding the bobbin and putting the bobbin in the bobbin race.
Пікірлер: 43
@CatamaranJaverne2 жыл бұрын
Thank you wery much, this is the tutorial I was looking for. We are sailing around the world with this sawing machin. Cheers
@user-ds4xp9ih3x5 ай бұрын
I ain’t ready for the world to end the professor
@desireeburnham78365 жыл бұрын
Omg thank you SO MUCH for being so detailed and up close i have had this machine over a year and hadnt figured it out YET!!
@jamesrogers9915 жыл бұрын
I am delighted to be able to help.
@oliveroadlondon1655 жыл бұрын
Thanks so much! Someone gave me this vintage machine and it threads so differently to the others that I use. Really helpful, thanks!
@lucita71397 ай бұрын
Thank you ❤
@beachbum46914 жыл бұрын
Brief and Brilliant, exactly what I needed but I still could not see the hole until I put a torch into the bobbin cavity, all very tiny - thanks for posting :)
@benzcrazy3 жыл бұрын
Thank you !!! awesome video I can't thank you enough
@memorygriffiths94424 жыл бұрын
Fantastic illustrations
@lidiawilliams48376 жыл бұрын
omg thank you!! i have curtains to make i promised my husband for our camper and who am i kidding i can’t even sew lol but i’ve threaded this thing so here goes!
@jamesrogers9916 жыл бұрын
Good luck with your project.
@midum33027 ай бұрын
I 'm very sad my elna not working un till see u vedeo NOW it OK thank you very much ❤
@jamesrogers9917 ай бұрын
I am glad to have helped.
@uthund4 жыл бұрын
Being completely new to elna machines I had no idea which way around the thread shouls be wound or which way it should unwind when in the machine. I think I gauged the direction from your video!
@carolynrogers15102 жыл бұрын
You always wind bobbin with holes on top and load it the same way, then direction is always correct. Only Swiss Elna bobbin, 7 holes on top, smooth under and slightly dished.
@jamesrogers9917 жыл бұрын
C G If you are still having problems, then put different colour thread in the bobbin than in the top thread and start sewing. This will show up where the problem is originating. You need to be sure that there is not fluff in the feed dogs or bobbin area.
@Monkey_PNut Жыл бұрын
Thank you. ( Couldn't figure it out!😊)
@mariamarfil16203 жыл бұрын
Thank you! 👏🏼👏🏼👏🏼👏🏼👏🏼❤️
@rayzor82683 жыл бұрын
hi James may you demo how an ELNA 1500-1600 needle bar gets unstuck and unjammed as well as hook timing re-synch? thanks man ! your videos are pretty awesome ! (TLC sewing machinery appreciates your crystal clear tutorials)
@elaskitchenworld25884 жыл бұрын
👍👍👍👍
@juliamay98963 жыл бұрын
Hello James just bought this Elna tx electronic, I have cleaned it, very dusty with lots of fluff under the bobbin plate, but overall looking good - except I can't get the bobbin spool to wind properly it is winding mostly at the bottom of the spool, the bobbin wonder is working properly, not stiff. I don't know if I have used the correct procedure for placement of the thread(do you have a video of that?) Is there free download manual you could direct me to?. I h Just want to say thanks for you video it helped a non technical like me. Keep up the good work, it's a shame to see old sewing machines just thrown away. I will always use vintage first. Julia Walker (Scotland)
@knittingnutter83924 жыл бұрын
My elna zz is not picking up the shuttle thread so it's missing stitches . I have turned the tension on the bobbin up and down to no avail. It seems as if it is the top tension but I'm at a loss now. Thank you for letting me know what the spring is for behind the shank much easier than trying to get it with my fingers.
@jamesrogers9914 жыл бұрын
The spring behind the shank goes into the bobbin to pull it out. Are you turning the wheel towards you? Is the needle flat side to the back of the machine? Are you threading front to back. Open the bobbin door cover and watch to see that the hook is spinning and catching the needle thread. that will tell you if the needle is in correct (all the way up and flat to the back) and if timing is correct.
@knittingnutter83924 жыл бұрын
@@jamesrogers991 Hi there thank you so much I didn't know what the spring was for ! silly me, but wow it does make it so much easier to remove the bobbin. Worked out what was wrong.... mmmmm shouldn't let my daughter use my machines I knew it was a bad idea... The needle was bent so the thread wasn't catching the hook on the shuttle casing.. Changed needle all back to full working order again.. thank goodness! My she has a lead foot my daughter !! I have tried to tell her but it's lost cause now she's 47!!!.
@jamesrogers9914 жыл бұрын
@@bustnmyballs OK we need to try a few things. First is check the needle -- put a new needle flat side to the back. Thread the machine again. Open bobbin area so you can see the mechanism. Turn the machine so the handwheel is facing you and the turn the wheel counterclockwise. Now that you know which way things move, put the machine so that you are in front of the bobbin area and do the test again. Does it pick up the thread? If not, get in close and see if the hook is meeting the needle as it begins the way back up. Let me know the results.
@jamesrogers9914 жыл бұрын
@@bustnmyballs I could not reply on your channel (I could not find the comment button). It looks like your machine is out of time. The hook should go near the needle -- you will need to take the covers off, loosen the screw and bring it back into time. Have no fear, it will be fiddly, but is not difficult.
@cazfromoz16 жыл бұрын
What device/tool did you use to remove the bobbin early in your demo? Nice and clear tutorial! Thanks.
@jamesrogers9916 жыл бұрын
The tool (or I call it tail) is attached to the machine at the back. If yours is not there, you might try a pencil with eraser.
@cazfromoz16 жыл бұрын
Thanks, James. I will.
@maribelvioque32515 жыл бұрын
Hi James. I have the same machine, it was from my mother in law. By any chance do you have the book 2 of the machine? Could you share it with me in PDF? Thank you so much.
@axelhollenberg1034 Жыл бұрын
Hi James thanx for the detailed view. In my Zu the thread will not JUMP into the little whole you mentioned in your Video. I have ready the Manual carefully and Clean Up everything. Do you have any Idea? Regards Axel
@jamesrogers991 Жыл бұрын
Try loosening the screw to 0 and see if the thread will go in then. Also, put your finger on the bobbin when trying to get it under the spring. It is also possible that there is a small end of a thread stuck or fluff stuck in the tension part blocking things.
@sharkeytaliep4943 жыл бұрын
Please! can u make video on how to tread empisal 406E overlocker machine
@jamesrogers9913 жыл бұрын
I do not have that machine. If you want to post a video of it on your channel, we could figure it out together. Also, we could meet virtually via skype whatsapp or other to work through it.
@conduracheemanuel68254 жыл бұрын
Hello can you tell me please what is possible the problem if it doesn't take the threat from the bobbin?thank you very much
@jamesrogers9914 жыл бұрын
Are you turning the handwheel manually? If so, make sure that you turn it towards you. Is the needle in with the flat side to the back? Have you threaded the needle from front to back. Also, leave the trap door open and watch to see that the hook grabs the thread and pulls it around the bobbin.
@conduracheemanuel68254 жыл бұрын
James Rogers Yes,I turn the wheel manually.The round house of the bobbin doesn't move when I turn the big wheel manually.May be that is blocked because of mess down there?can I clean that "house" of bobbin under?I hope that you understand my problem and can help me.Thank you very much
@jamesrogers9914 жыл бұрын
@@conduracheemanuel6825 That worries me. I would suggest clean up the bobbin area, but you need to take the end part off with the motor and see if the belt is connected to the bobbin shaft.
@conduracheemanuel68254 жыл бұрын
James Rogers Thank you very much for your help.Morning I will take it to a mecanic because I found a piece plastic broken.
@blancabarrera75813 жыл бұрын
Nesecito Aprender a enhebrar Maquina el a español Gracias
@miraculouslover22674 Жыл бұрын
Reasons for not succeeding in pulling the thread out of the spool