Elvis Creates A BRAND NEW Bumper For The Classic Mitsubishi Shogun 4x4! | Wheeler Dealers

[@WheelerDealersTV]

Subscribe to Wheeler Dealers TV: bit.ly/3IWnYJG

[@akokosk8]

Nice Job. All we the owners who fit 32/10/15 or more, had to do the same. In my particular case, I used two extra lift kit nylon suports on top of the frame, so (in case I change to smaller tires again to avoid mud terrains destruction on the asphalt) I can adjust the bumper position correctly. Now I’m on 33/12.5/15 and it looks and performs really well on and also off road. ARB lockers, performance clutch, shorter ring and pinion set, etc… A beast. It’s not a rock crawler, but I call it the “Black Widow” cos it’s black and it crawls so well. Now I’m planing to cut some sheet metal and ad a diff drop, but I can’t find gear and pinion set even shorter for bigger wheels. Who knows… perhaps i’m lucky 😅

[@milindjoshi4085]

Perfect fabricated drafted bumper design,,,, lovely

[@joeyymit]

That looks perfect mate. Nicely done!

[@jamesmisener3006]

How do you access the winch to service/repair/replace it. Nice rig. Cheers 🇨🇦

[@rolandtb3]

Great upgrade. It's a shame they stopped producing this marvelous vehicle. Few come close.

[@回口回-u9f]

Where I'm from we have a saying :"If it's not leaking oil then it's not a Mitsubishi".

[@SandunLabs]

​@@回口回-u9fLol, where are you from ?. Parking lot 😅?

[@回口回-u9f]

@@SandunLabs I come from a place that's thousand times better than your mother's womb...

[@aaryeshg.6526]

​@SandunLabs I've seen high mileage and abused ones leak oil but they still keep going.

[@Michka1001]

One of, if not the most capable off roader. The super select system they introduced with the 2nd gen is amazing. Surely miss my old 2nd gen, but love my 3rd gen just as much ❤

[@TheBlaert]

I service a couple of these for a local farmer. They seem to be some sort of Ralliart special edition. Tons of gauges, adjustable Bilstein suspension, leather seats, Nardi steering wheel. One has rather nice 3 piece factory wheels too. But being farmers literally everything is destroyed or badly damaged. Awful shame

[@toddhansson1613]

I think the shape of the bumper looks fantastic. My only gripe is the slight over hang of the number plate. It would bug me. Aluminium would have been a lighter and better choice for longevity. IMO.

[@davidlambert6171]

Difficult to weld aluminum. Since they were going yo resell it, they just went with the easier fabrication choice.

[@akokosk8]

Steel flex more and it returns to it’s original position, and if you pass that point you can “bush repair” it with a hammer or a rock. Aluminium, if you go further certain point breaks. Aluminium bashplates, some times break throught by sharp rocks. Also steel it’s easier to weld

[@thomasmeijer6275]

5:28 That new front bumper does not connect at all to the silver-gray wheel arch extensions (don't know what those silver-gray things on the wheel arches are called).

[@KevinJones-bt7ib]

The arches didn't look right with that bumper, maybe if they were sprayed black it could of looked better, or even wrapping them with a carbon fibre look might of looked good

[@turquoisecat761]

@@KevinJones-bt7ib could "have"

[@brandongoberdhan6335]

Great job that looks so good! 🎉❤

[@jerryritchie9068]

So; no mention of recalibrating the speedometer or changing the drive gears to reflect the increased wheel diameter. Also, did they include a replacement spare?🤔

[@cant_stop_crawling]

Nice bumper. I just start fixing my 1990 Pajero 😉

[@adriangabrielandercou8033]

Great work! But 6mm is way too much in my opinion

[@1DestinyK]

Hi, could u upload the full programme pls?

[@joeyi0607]

Good work, but how are you going to remove the winch if it breaks😢

[@davidsaunders3910]

Take the bumper off?

[@joeyi0607]

@@davidsaunders3910 I guess you can. But;;;;;

[@jczerozerotwo3071]

awesome mitsubishi

[@JxH]

6:00 The slot for the winch line moved down. Was top, now bottom.

[@kencarse3677]

Yeah I thought also looked to narrow then you see the final shot. O well all part of fabricating. Wonder if they flipped or just cut a new slot?

[@toddhansson1613]

It may have had to do with the number plate location ?

[@philleeson7835]

​@@toddhansson1613 I doubt it.more like a F@#k up.

[@BandiMasha]

I wonder if Elvis recalibrated the speedo as bigger rims mean more revolutions.

[@kylemasters9380]

Was wonder what year this shogun is in this video if anyone can help

[@luismolina9712]

Espectacular I hace one second generations impecabel

[@tjharmon6360]

Undercoating on trusty vehicles makes themrust faster, you need a oil based product in those cases

[@philleeson7835]

Elvis f@#ked up the bumper. Welded the fairlead opening upside down. One shot the slots at the top of the bumper,final shot the slots at the bottom.school boy error.

[@capt_flapper]

What a mess that Pajero looks now, should of kept it orginal as possible

[@universeltuto7620]

Yes !!

[@IvanRodriguez-rd7he]

Hi guys! I want to see how you restore a Nissan wd21!!!!

[@Doug791]

6mm steel ? Bloody 'ell that's overkill.

[@peterbarber7613]

Doug Green. If you look at most pre-made bullbars they are heavier than 6mm

[@Doug791]

@@peterbarber7613 I would have aluminium , I should have said in my op.

[@peterbarber7613]

Snorkel top is on backwards

[@franktaeterUSA]

Boost intake..😂

[@lalindra_wijayarathna]

First comment from a Pajero lover

[@adamwalters9680]

I really wish they would concentrate on finishing classic line/play sets (slimepit fright zone) and vehicles (dragon walker attak track battle ram) before they bother with rubbish like the powers of grayskull line. So want a mantisaur and modulok also. Fingers crossed

[@farkasattila7311]

How much you sold the car ?

[@twinsonic]

£5995

[@anderspedersen7488]

6 mm steel? Isn’t that more for building a boat?

[@AaroKeipi]

6mm was definitely overkill. 3 or 4mm would likely have sufficed, especially since the purpose of a bumper is not to stay rigid in case of an accident. But it def looks good though!

[@anderspedersen7488]

@@AaroKeipi Nothing wrong with the shape!

[@MGMutt]

@@AaroKeipi I believe he probably wanted the strength for the winch, but would have been better to do a box section frame to mount that to, with much thinner sheet for the rest of it.

[@glengerdes4158]

Mine has the same wheels

[@liveitwelllivefast6338]

Em Portugal essas modificações são ilegais.. O veículo tem que estar como foi vendido na origem..

[@ttinnovations3310]

What happened to the other tall person?

[@alfamonk]

you could see that understeer I na straight line with that extra 100kg on the front end 🤣

[@tomgruitt6563]

Hilarious!!

[@НинаПетрова-л2ч]

❤❤❤❤❤

[@guillemataro]

Still not great Pajero in Spanish language...

[@chiefrocka8604]

Very popular in Brrrrr Brrrrrrr Brrrrrrrrrr Bradfud innit for jewlry shop grand enterance and dash

[@tonohola4263]

Spanos please.

[@ghinealiviu66]

👋

[@Xxxxxx.5303]

👍👏👏👏

[@rioharyadi7265]

❤🎉😮

[@anthonyparchment8741]

👏👏👏👌👍

[@ventsistoqnov6680]

💪🙂👌

[@canates53]

Edd china 😢

[@wimspreeuwenberg2516]

Is a fake mechanic

[@TheLemminkainen]

Pajero,Montegro, Shogun junk with many names

[@lopantolulu]

eat a duck hater

[@queufaruk9071]

Think that bumper looks awful

[@glasjanus]

Fix the steering to the right side and you got yourself a buyer

[@turquoisecat761]

D'oh It's on the right side, as opposed to the left side.

[@twinsonic]

Why do they sell their vehicles for little to no profit? I mean 600 bucks profit is nothing