I love the videos where mistakes are left in and not just redone perfect. It really helps people to be more aware and recognize issues or problems they otherwise wouldn't even consider. Great video, keep up the great work!!
@RC4all3 жыл бұрын
Appreciate that, thanks for watching 👍🏼
@SamsSweetAndSexyBBQ3 жыл бұрын
It would of been nice if he kept his mistakes out or showed it after the process cause I had to do it twice and unnecessarily chop up my servo and tray.
@GRAZINGARIZONA3 жыл бұрын
@@SamsSweetAndSexyBBQ woulda been nicer had you watched the whole 6 min video before chopping up your tray and servo
@timwegman57762 жыл бұрын
@@GRAZINGARIZONA exactly!! BS you blaming him for your mistake and not watching the video all the way through that's 1000% on you my friend.
@GeddyRC2 жыл бұрын
@@SamsSweetAndSexyBBQ Who hacks up their hardware while watching a video for the first time? Maybe next time WATCH it first and then go back and try it.
@Supaslow5.33 жыл бұрын
I like how this guy is just straight to the point.
@leecherone76013 жыл бұрын
Thank you for this video. It’s helped me install mine to my C10. I am super new to RC to am finding it all a bit worrying. I live in U.K. and we have very little parts for these and limited RC stores, So your channel has been very useful. Thanks.
@RC4all3 жыл бұрын
Glad we could help you out and thanks for tuning in. The RC hobby is a blast so hang in there. 👍🏼
@brianonthego3 жыл бұрын
Thanks for the how to. I have that servo on stand by for when mine goes out. I'm thinking of getting some mini heat shrink and chopping a bunch of that servo wire down to size.
@echobeefpv85304 жыл бұрын
I did this upgrade about a week ago, and made the same mistake you did, LOL ! Totally worth the upgrade, I'm now looking for the upgraded linkage to tighten up the steering. Good video, subbed !!
@adrianku472 жыл бұрын
thanks for the perfect breakdown, made it very easy and straight forward! tons of information under 10 minutes!
@GreenJeep19983 жыл бұрын
Just did this on mine last week, but Hot Racing now makes an aluminum servo mount to put those EMax servos in these trucks!
@RC4all3 жыл бұрын
Nice, that’s good to know 👍🏼 thanks for watching
@greatday22242 жыл бұрын
Thanks for showing this. Cape Town, South Africa.
@pwrofgrayskull3 жыл бұрын
This was extremely helpful! Subscribed. Thanks for leaving the "oops" in there, helps me to be aware when I tackle this myself. Well done, thanks again. 👍
@RC4all3 жыл бұрын
Great to know, appreciate you tuning and subbing 👍🏼
@GeezerGramps4 жыл бұрын
It’s pretty easy to open up the servo unsolder the wire, shorten it the resolder it back.
@RC4all4 жыл бұрын
Good idea 👍🏼
@CarminesRCTipsandTricks3 жыл бұрын
SO glad that fits without much fuss!! I also Fly... And I've got at least TEN of those EMAX 9 Gram and 12 Gram Servos lying around. I'm guessing that the 9 Gram would be the right one....
@daig1984 Жыл бұрын
Thanks just used this to fit mine saved me a load of time! 😊
@RC4all Жыл бұрын
Awesome 👍🏼
@brandonburks41723 жыл бұрын
Great video man. Straight to the point, perfect music
@RC4all3 жыл бұрын
Thank you 👍🏼
@karlsrcvideos26804 жыл бұрын
Great video and definitely best upgrade for scx24!
@DeliberateNRandom3 жыл бұрын
Thanks for the info! I wanted to make sure I was going to be doing it right.
@mtrccrawler63002 жыл бұрын
I love this servo I bought like 6
@memeaholic76899 ай бұрын
Are the long screws you used to put the servo in included with the SCX24 box?
@nimoanuario41962 жыл бұрын
Thanks for sharing your knowledge 👍👍👍👍
@Daniyoyo Жыл бұрын
Just installed the emax servo on my scx24 and it is making this I can literally hear the metal gears ⚙️ turning. Almost like a buzzing grinding sound. I have adjusted the ST/DR and loosen up the links. Are the emax suppose to be alil louder than stock servos. The servo works fine , nice and strong , but this buzzing noise …
@ElijahBradley08 Жыл бұрын
The screws on the servo hit the bumper mount causing the suspension to be unable to compress, is there a fix?
@romaindavanture59463 жыл бұрын
Hello, I have a question. Do you have the characteristics of Horn size and number of teeth and if there is a horn in aluminum? Thanks
@RC4all3 жыл бұрын
Mmmm not sure on that one. Just do a Google search on aluminum horn for Axial scx24. Hopefully that helps
@liamsrccars46363 жыл бұрын
Dad has just ordered some of these servos for ours
@RC4all3 жыл бұрын
Very cool, they are much stronger than the factory ones.
@bloodangelphil3 жыл бұрын
This helped with the installation, but I think the first Emax servo I bought's a dud. It's seizing up as well. I also ordered a new servo mount, because the servo's not sitting right either. Still a good vid.
@RC4all3 жыл бұрын
Thanks for watching and great to hear
@stringsattached672 жыл бұрын
I bought the $15 aluminum servo tray cause it's purdy 😁
@danielhulse40762 жыл бұрын
So I put 2 new Emax servo in my SCX24, zero'd it out. But once in a while, the servos like to glitch and go almost full lock on one side, and I trim it to full capacity and the servo still shifts to one side. How can I fix this, and there is something doing wrong?
@bobbysmhurda2 жыл бұрын
Hello, I'm thinking of doing this because I've had mine for a day and when I steer it will just freeze and not move until I hit it myself. I'm wondering if this can be fixed or if I should just buy a new servo.
@spudpie87512 жыл бұрын
Thank you!
@Thepreppersbunkeroutdoors4 жыл бұрын
Im literally doing this today with the same servo because i just smoked my servo. Lol
@RC4all4 жыл бұрын
Nice, it’s definitely a better performing servo 👍🏼
@Thepreppersbunkeroutdoors4 жыл бұрын
@@RC4all yeah its good! But i didnt really do it for the performance- honestly, if i could have gotten a servo that performed as well as stock (with the servo saver glued) i would be happy- Or if the stock one with glued servo saver worked bbuuttt it only took 1 session for me without the servo saver to smoke it lol
@josephmorelli31914 жыл бұрын
I am a real novice trying to carefully upgrade my SCX24 Chevy C-10. I am doing pretty well w/ a lot of help from guys like you. Your video was very good. I am not sure I caught all the info on the servo. Could you tell me where to get it? EMAX ES08MAH???
@RC4all4 жыл бұрын
I attached a link down below in the description, hopefully that helps 👍🏼
@josephmorelli31914 жыл бұрын
RC4all Thank you.
@josephmorelli31914 жыл бұрын
RC4all I’ve managed to order the servo (thank you!) & servo tray. Do you think a replacement metal servo horn would be a good idea? I’ve been searching & searching. Really don’t know what “size” to look for. Any advice?
@SSecret_Hugz2 жыл бұрын
Great simple how to.
@RC4all2 жыл бұрын
Thanks 👍🏼
@Mitaccio4 жыл бұрын
Thanks for the how-to! I’m going to upgrade my servo but wonder if I should use the ES08MD or ES08MA. Digital vs analog?
@trevorsanders1613 жыл бұрын
Which one did you figure out is better?
@chiliandsiomai3 жыл бұрын
How did you know that you placed the servo the wrong way?
@RC4all3 жыл бұрын
Once we tested it, we could tell something wasn’t right 🤣 thankfully it was an easy fix.
@tylerm1243 жыл бұрын
Is there a reason you didn't just cut the extra hole of the single servo horn and round it off instead of cutting the three other bits off and making it kind of round.
@RC4all3 жыл бұрын
You could probably do that as well. We just decided to use the new piece. Thanks for watching
@Slowboy032 жыл бұрын
I did this upgrade and it is much more powerful but it rubs on the frame rails even after using a file on it
@goreyboggs3 жыл бұрын
I’m doing it to my Jeep. But it does not go back all the way in the servo holder.
@RC4all3 жыл бұрын
👍🏼
@johndavid56273 жыл бұрын
PowerHD TR-4 digital servo falls right in. forget the emax
@RC4all3 жыл бұрын
Good to know 👍🏼
@kennethrich21073 жыл бұрын
Servo Horn spline count?
@senditboypoe43182 жыл бұрын
cool the vides
@brianonthego4 жыл бұрын
Thanks so much for showing how it's done. Is this the emax es08mdii model? I subbed.
@RC4all4 жыл бұрын
Yes it is 👍🏼
@brianonthego4 жыл бұрын
@@RC4all Thank you. Im a newbie, want to get started right.
@JuanAlvarez-ix4th3 жыл бұрын
Hello im having a problem with my servo upgrade and i tried 2 servos the thing is it turns more to the left side than the right any one had the same issue?
@smokes23663 жыл бұрын
try taking off the servo arm and making sure the servo is centered then reassemble
@crawlingnationrc42334 жыл бұрын
Wow good video👍👍👍
@isaacc.b33094 жыл бұрын
Does this work with any bumper ?
@RC4all4 жыл бұрын
I would think it would work with most
@robax3r3 жыл бұрын
how do you center cervos.. my stock cervos is twitching and constantly turning left
@bansheerider6193 жыл бұрын
To get it perfectly centered you need sub trim, which the stock radio doesn’t provide. Without sub trim the servo will be slightly off, it’s normal.
@elijah4324 жыл бұрын
Nice
@c00pd0g63 жыл бұрын
I did mine for bigger tires
@Sedonapass2 жыл бұрын
fu
@DanielHerbert77 Жыл бұрын
Dude. You should EDIT your videos to at least make a visual note on the screen when you make a mistake! I followed along step by step and repeated the same incorrect thing you did! UGH.