Embroidery Hub Ep. 35: 3D Puff Embroidery Beanie | How to Embroider Beanies with 3D Puff

[@foreverwestlife1]

I have never seen anyone demo this before. Thank you.

[@ricomatv]

So glad you found this video helpful!

[@foreverwestlife1]

@@ricomatv Yes I did.Thank you

[@BigDreamzW]

amazing video!! i embroidered my first beanie within 5 min after this video. great job!!!

[@ricomatv]

Yay! We are so glad to hear this!

[@10star9]

The Hat looks good on you, I watch the one that you did with the NY Beanie I was thinking about the foam on that Beanie. It's just a Thought!!!!!!

[@ricomatv]

Great idea!!!! Thank you :)

[@securecultures]

How high should you adjust the pressor foot for 3d puff embroidery of a structured hat?

[@ricomatv]

If you are embroidering with a thick layer of 3d foam (typically 2 to 3 millimeters), consider raising your presser foot to 1.5 to 2 millimeters to accommodate for this extra layer.

[@AdventuresofaNurse]

Do I need a special design to use the puff? Or can I use any that I would on a beanie?

[@ricomatv]

HI there, thank so much for watching. Yes, 3D puff designs to be specifically digitized for 3D puff.

[@cherilynblake8384]

what is the pull compensation that is used for this type of project?

[@ricomatv]

Hi there, thanks so much for watching. This is a great question to ask in our Facebook support group, Embroidery and Custom Apparel Mastery. This group is meant for all lovers of embroidery with lots of resources and more members discussing topics and helping each other out and learning about Ricoma machines and other brands! We recommend you join this group as we'd love to have you! facebook.com/groups/embroiderymastery

[@LucyLu70]

Thank you for this video did you have to flip the design?

[@ricomatv]

Yes for caps and hats you usually have to

[@MannyzCustomz]

Can you use a heat press instead of the heat gun ?

[@ricomatv]

Technically you could, just gotta make sure you put a teflon sheet over the beanie and the temp not be so hot.

[@glavenant5570]

What kind of foam do u put ! Where do. Buy ?

[@ricomatv]

You can buy any standard foam at and craft store, like Michaels, Joan fabrics, hobby lobby etc. or on online stores like allstitch.com

[@govacho33]

Thanks for all your great instructional videos on the machines, but were do go to learn how to create the logos and design settings to make these great looking designs ?

[@ricomatv]

You can check out our digitizing software channel: kzbin.info/door/8S6rH8vVsEH_D64lklGTFA We will be putting out more digitizing content. Stay tuned by subscribing to our newsletter: info.ricoma.com/newsletter

[@VanityFerret]

Can you let us know the wattage / heat level of that heat gun please?

[@ricomatv]

Were you referring to a specific machine?

[@saltysunshine6931]

How does it hold up over time?

[@ricomatv]

The best part about embroidery is there's no wear and tear, it remains in tact forever.

[@saltysunshine6931]

@@ricomatv Embroidery get's snagged, 3d puff especially. Plus the foam is prone to slipping out from between threads if the satin stitch is wide enough.

[@todd3166]

Do you have to change the settings on the Ricoma machine when embroidering Puff? Every time I do it, it just smashes the puff down to where you can't see it's there. I have the MT series. Thanks

[@ricomatv]

I you need more help on puff embroidery on your MT, check out this video! kzbin.info/www/bejne/iamopnaVZ5ilntk&t

[@jacobreed2709]

Hi, where do we get the 3D puff foam??

[@ricomatv]

You can get them almost anywhere. Specially craft stores. Walmart should also have some.

[@diseñosvideos-n1s]

My Chanel ..3D

[@Mrjonesmm1]

How do I embroider beenie if i do not have a mighty hoop..

[@ricomatv]

Hi there, check out this video! kzbin.info/www/bejne/g6nMoWlse5ipd9U

[@oncryptcuh8361]

niice!..what size and type of needle was used?

[@ricomatv]

Thanks Aboe! We used a 75/11 sharp needle.

[@jgulewich]

can you do puff embroidery on the em 1010

[@ricomatv]

YES!

[@cathysutton1589]

It would be nice to have a written sheet on needle application

[@ricomatv]

Thanks for the idea! We'll look into creating one, in the meantime we have an episode all about needles: kzbin.info/www/bejne/oqDVYYh6nLWpj5Y

[@mich518xoxo]

You're very knowledgeable! Wow! You lost me! Love the result though! Missing in action! LOL

[@jabedhossain1375]

Thank you

[@ricomatv]

No problem! Thanks for watching :)

[@_giangi]

Is there any tutorial on how to do puff/3d embroidery on sweaters?

[@ricomatv]

Hi Giancarlo, the process for 3d puff embroidery on sweaters would be the same as how we embroidered this beanie (it's a knitwear with the same textured and stretchy characteristics). Good luck! Let us know is you have any other questions.

[@edgarzamora7553]

I used tear away and it looks really stretched out

[@ricomatv]

Hi! What kind of design did you do?

[@connorwilliams4859]

How would you do key tag embroidery e.g remove before flight or motorcycle key tag please

[@ricomatv]

Hi Connor, your best bet would be with the 8-in-1 hoop with thicker needles and run your machine at a low speed. Depending on the design and material of the tag you may have to adjust tension. Again with every project, just do little tweaks here and there until you get it just right. Good luck!!!

[@connorwilliams4859]

Ricoma Embroidery Machines thanks

[@demashky04]

Where I can buy the temp spray .

[@ricomatv]

You can use amazon.

[@adrianmejia1685]

What machine model is this?

[@ricomatv]

It's a Ricoma 1501-TC

[@starphoto6858]

hello how is the density on the hoddie and the cap is there any difference?

[@stickerjunkie883]

i will like some help with small font .. thanks please make a video

[@ricomatv]

Thanks for the suggestion Tony, we have it on the pipeline!

[@MrTeddybeh]

u r cute