Emergency Engine Rebuild of Concrete Mixer Truck Stuck in Desert

[@dogbitefred6631]

What you men lack in tools you make up for it in manpower and teamwork. I was hoping that you guys would have replaced that clutch disc and expansion plugs on the block. The guy standing in front of the engine when you took it out and re-installed it was taking a big chance on getting squashed like a bug. Overall, you guys did a great job.

[@mikehunt3222]

A torque wrench and torque sequence??? What’s that???

[@Pakistani-Hands]

Thank you for watching and observation. Let the positive vibes come.

[@harlaown965]

❤

[@harlaown965]

​@mikehunt🎉🎉😢🎉🎉🎉😢😢🎉😢🎉🎉🎉🎉😢🎉🎉🎉😢😢🎉🎉😢🎉🎉😢😢😢😢😢🎉😢😢🎉😢🎉😢🎉🎉😢😢🎉😢😢😢🎉😢🎉 1:22:34 😢🎉 1:22:34 😢🎉🎉😢 1:22:34 🎉🎉🎉😢😢😢🎉😢 1:22:34 🎉😢🎉😢🎉😢😢😢😢😢😢😢😢🎉🎉😢😂😢🎉🎉😢😢🎉🎉🎉😢🎉😢😢😢🎉🎉😢🎉😢😢😢🎉🎉😢😢🎉😢😢🎉😢😢🎉😢😢😢🎉😢🎉😢😢😢😢😢😢3222

[@victorpasaca2421]

26:33 26:40 😊

[@GeneralSulla]

I'm always amazed at what these guys can do with the limited tools they have. The teamwork and experience of the senior mechanic is vital considering the work environment. My concern for the health of the workers is tempered by the fact that they do have a relatively good job in their country of Pakistan. They feed their families and thats good.

[@davidmitchell7183]

I would bet that there aren't many trucks with DPFs in Pakistan.

[@user-ln7of9gs4s]

I’d probably bet there aren’t any.

[@fawadbadshah7837]

Not yet but im sure they using something else to deal with the issue

[@ewanstewart8011]

@@fawadbadshah7837they will probably just remove them and put them in the scrap pile

[@joshuapittman5208]

@@fawadbadshah7837 Yup, probably a torch or saw.

[@Bjoulfson4k]

Empires built on Oil should not lecture others about DPFs.

[@kevingray426]

You'd be amazed how easy (relatively speaking) alot of this stuff is when you don't have any rust...... I'd like to see em pull this off in indiana in the winter

[@seanwagner3965]

no time to rust, they rebuild the same engine every 1600 miles.

[@Iron_Lion_Of_Zion]

They would find a way. They always do. Thats why America, & Russia failed to take Afghanistan! 😉

[@davidaspinall9676]

Fantastic job, from ireland.❤👏👍

[@johncholmes643]

When I was a kid, I'd take things apart and wire brush them and wash them in gas and call it rebuilt too.

[@billbob9570]

new bearings and rings.......... did u watch

[@itjustlookslikethis]

Did you follow torque instructions?? tightening schematics?

[@Iron_Lion_Of_Zion]

@@itjustlookslikethisyou would be crying like a little bitch in that situation - with or without a torque wrench!

[@Gillie022]

I watched one of these in complete amazement and now am hooked. The teamwork and determination these guys show is incredible. One cannot overlook that they pile everything up and yet know exactly how it goes together.

[@wayneandrus240]

Incredible, brilliant, fantastic! Great mechanics. I love this video!!

[@turboslag]

Anyone notice that this started as a 4 valve per cylinder, overhead cam engine, and became a 2 valve pushrod??!! Wonder if they give a warranty?!

[@RadioReprised]

I swear the guy cranking down the cylinder head said ''CLICK!" in Pakastani!

[@Chudsaves]

I sure didn’t see a torque wrench anywhere. Hahaha

[@itjustlookslikethis]

How do you say "click" in Pakastani???

[@jeffthurmond7537]

I guess cross threads better than no thread on that 1 head bolt

[@jamietaylor2257]

My eyes were watering, that bolt shall be a righty loosey 😂

[@dirtydirts246]

I mean, consider it welded.

[@RichardThompson-gc1cf]

THAT ENGINE NOT MUCH TO SAY GOOD LUCK WITH THE YOUR PROJECT 😊

[@maurocunha6244]

You guys did a good job. Nice team work.

[@WizzRacing]

I give it too these guys. They are tough and rugged. They know what needs to be done and they get it do it..Makes my old days of rebuilding my motors in the bedroom look tame..

[@itjustlookslikethis]

That driver depends on that truck for his survival. He was probably pan-handling roadside while the engine was being rebuilt.

[@SherriMSDRML-qm1pe]

Thank you thank you 🤠🐎🙏💯💯💯🇮🇳🇱🇷

[@MEGAPL]

No Milwaukee 18v rachet ???? :) OMG, I know you can point out steps that we call "unsafe" or whatever, but to me these guys are amazing. They do miracles with hand tools.

[@walwiz816]

Ich bin begeistert von diesen Mechanikern die mit einfachen Werkzeugen Großes leisten. Solche Arbeitsweise wäre in Deutschland undenkbar

[@michaelfrancis7072]

Great job, but I can't believe it started up as easy as it did.

[@Chudsaves]

Listening to the minion voices is almost as good as the video. Haha. Lot of work here. Wow

[@Pakistani-Hands]

😁

[@gordonagent7037]

It’s always interesting and amazing to watch you guys adapt and overcome any problem with resourcefulness and ingenuity, it’s not how we do things here but we both get the same result, hats off to you gents

[@pablogp9333]

same same result....Im not sure....

[@AlejandroGarcia-tk7hv]

48:08 that head bolt is cross threaded and the dude with the impact doesn't give a shit and slamed it all the way in

[@joshuakaisoelnsa1607]

time for a second rebuild!

[@itjustlookslikethis]

one cross-threaded bolt means nothing to these people.

[@1marcelfilms]

Thats a problem for the next rebuild shop haha

[@larry9133]

This is where pug1 from inwood customs learned how to do his engine rebuild's

[@DontCryAboutIt]

Whatever happened to him in his battle with the town?

[@thetwostrokerebuilder]

Skilled mechanics 🏁🏁 not a torque wrench in sight 🔧🔧

[@lewishendershott4783]

they don't even have a rachet

[@aqibfreed4672]

They should send these vids to all the little girls who cry about torque specs hahaha

[@hedgehogthesonic3181]

Torque specs are important, otherwise the screws will come loose eventually.

[@aqibfreed4672]

Havent used torque specs once in 10 years. Never had a car come back with lose bolts

[@hedgehogthesonic3181]

@@aqibfreed4672 If you are putting an engine back together, using the torque specs for said engine is important, otherwise something could come loose due to vibrations, it can take months or years, but it can happen.

[@drierdoughnut80]

@@aqibfreed4672probably because they all ended up as scrap

[@aqibfreed4672]

Maybe learn to read first brother, i never said the cars never came back…. Now get back to googling the torque spec for a door handle 😂

[@khiangtetlangval4543]

You're very good at making it...!❤❤

[@Pakistani-Hands]

Thank you! 😊

[@michaelcrough4922]

After watching this, I think I can rebuilt my VDJ 78 V8 cruiser motor, just need a new 3 foot torque wrench bar from metal land .

[@JARIBUURI]

OK , GUYS , KEEP ON GOING !!! PS. HELLO FROM FINLAND !!!

[@Pakistani-Hands]

Hey ! Thank you brother.

[@JARIBUURI]

OK !!!

[@horstmuller7512]

Never ever forget wearing safety pajamas and safety flip-flops! This equipment has already saved millions of lives of Pakistani workers and many are now reaching the age of 30, even if they are blind or have had their arms and legs chopped off while working.

[@MrMAKFoto]

Never had any major incident, it's the field of braves. You can bitch though.

[@breider1116]

Don’t forget lead poisoning. Not a rebuild. Repair using old parts.

[@TauariiMao-pg6mk]

Ça c'est des vrais mécanos, jolie travail ❤❤

[@ElmerSimpson-o5t]

It isn't the same engine AT 3.25: we see an OHC head and four valves per cylinder 😊😊 Fun fact 🎉

[@antoniovalverdemoreno125]

Un gran trabajo,felicidades,salud y suerte desde España

[@FJCTrucking]

Not the same engine buts still pretty cool video 3:28 & 57:43 you can tell different heads

[@Diegokretzer]

O Brasil é fã de vocês

[@Bruno-zl3wx]

ES ADMIRABLE VER el empeño y dedicacion que ponen en lo que hacen con tadas las limitaciones que tienen pero les sobra mucha voluntad .soy de ARGENTINA el pais de donde es MESI saludos

[@JoaoAlonso-dn7ic]

.....VISAO BRASIL NOT 10 PARA OS MESTRES MECANICO 😮 ❤

[@tittukuriakose9779]

Great job

[@kotleta4634]

Наверное мотор умер после такого же ремонта. )) Дядя Серёжа учился там.

[@walkmen7ify]

На канале Гараж 54 вышел видос, там собрали мотор в «пустыне». Мотор недолго отъездил

[@fabianrus4159]

Well done, runs like damaged….

[@simonkrezias7615]

I wonder if all the persons that say what an amazing job these people are doing, would ever give these people their engines for a complete overhaul? Specially seeing how the pistons are treated with a wire brush,a hacksaw blade , sand paper , rubbed on the ground dirt.

[@Todd-r8b]

This reminds me of working at big o tire

[@Iron_Lion_Of_Zion]

I can only imagine the US/Soviet armies in Afghanistan, waiting for a $10 part, to fix a $Million tank. 😂😂😂

[@simonwootton-davies1179]

rattle-can rebuild, all good for another 1500 miles, brand new second hand parts used throughout but fair play it works and works well, "if it aint broke dont fix it"

[@GUNSnBACON318]

Imagine what these guys could do with a work truck with a crane air compressor welder and a complete set of sockets and dewalt power tools.

[@itjustlookslikethis]

They have none of that but can still do a decent job. All things considered

[@19tukytuky]

No safety glasses, not safety gloves,,, and they are still the best🙏👈🏻💯💪🏼💪🏼 420 😎👈🏻

[@joshuakaisoelnsa1607]

and sandals

[@freddog5218]

I love there torque wrench I,m sure there real close.

[@one_alonevanalon3458]

in america theid buy a whole new truck xD

[@fernandomejia2498]

Excelente trabajo señores saludos desde California

[@JoopKomkommerShake]

Just in time finished before the concrete gets hard.

[@imballin93]

They pulled a UD engine out of the truck but are rebuilding a hino engine?

[@larry9133]

Here in USA out of frame engine rebuild would cost 10 thousand + Over there a dollar two ninety 8

[@itjustlookslikethis]

you're probably right. But over in Pakistan, getting that truck back on the road is what matters.

[@CarMachanical]

I'm shoking about head bolts titerning L-Rod😂😂😂😂😂🤣

[@komodro]

So many thighs wrong, i can't even start( but for me the mustard jug\assembly oil was the winner). If the engine won't blow up before 200h it's a miracle.

[@itjustlookslikethis]

Have you watched any videos showing how they fix broken axels? just weld it and hope for the best.

[@emilytorres7009]

I’m in need of your prayers and healing vibes. Please keep me in your thoughts as I work towards better health.

[@westnash]

Would also be interesting to know what the bill was for this work? And what it would be in a fancy shop in USA or Europe. Hopefully USAID doesnt get involved to show them the 'right" way to rebuild a motor.

[@kylehartwig9398]

Was the trucks drum full or empty

[@eddkennedy6458]

Where did the multivalve cylinder heads with overhead camshaft go to. it ended being a two valve push rod engine.

[@konstantinbuldog3082]

такое ощущение что масло они меняют только во время ремонта двигателя

[@THAYOUTUBEYARDA]

Next design a motor

[@MrMAKFoto]

It's 50 degree centigrade! bitchin about safety gear not gonna change the fact that they are working in HELL.

[@donnienicholson6062]

Might the gentleman inserting the cylinder liners start all six, wipe his hands and then drive all 6 home??

[@chadpugh7661]

im sure they have lots of repeat customers lol

[@antpoo]

I hope it wasn’t full of concrete at the time.

[@Big_ol_bass]

Freak in the sheets, pajeet in the streets.

[@JDHitchman]

NO torque wrench? NO new clutch when they are right there? Dumb!

[@ВикторЕрмаков-в1ч]

Мне кажется он стал работать хуже после переборки,там стук неимоверный стоит😂

[@АндрейОтрепьев-ы2л]

Конечно, поршни по земле катать 😂

[@GeneralSulla]

Torque, sequence and immaculate environment might be four letter words there! 😂

[@reddysteddy2030]

Why don’t they have tools? You would think they would even have at least a made in China ratchet

[@keithwhittaker5238]

Hino / UD …..simple / basic / reliable / bullet proof ….for all the negative comments this engine will probably out live all of us !! Lets see how these modern engine go when they are 40 years old , 100% sure they couldn’t get a quick “rebuild “ on the side of the road !!

[@sinuratjulyantojugul3874]

Mesin yang diperbaiki berbeda dengan yang ada pada truck 😂😂

[@itjustlookslikethis]

A blown piston will mess-up an engine. They obviously had to replace several key items.

[@larry9133]

At 20:11 if you turn your volume all the way up you can almost hear the click

[@pablogp9333]

jajajajjaaj

[@michaelboyle7668]

Why are the head studs so hard to screw down ?😊

[@wayneandrus240]

wONDER HOW MANY DAYS/WEEKS IT TOOK TO DO THIS? NO torque wrenches used?

[@lookylook570]

Looks like it took 1hour & 22min…..

[@Bruno-zl3wx]

@@lookylook570 jajaja

[@itjustlookslikethis]

Most likely it was one week.

[@Arhipchik188]

Динамометрический ключ? Нее не слышал)

[@timothyraz]

how many days from removal to reinstall.

[@antpoo]

Why do we never see cam bearings replaced? Don’t they wear also?

[@joshuapittman5208]

​ @Pakistani-Hands What was the original problem that caused a full out of frame bearing and gasket replacement?

[@itjustlookslikethis]

Blown piston.

[@đặngngà-q7p]

👍👍

[@joseluis7065]

Ahi no se usa torquimetro😮😮😮

[@larry9133]

36:18 Working with shit tool's but they have the latest and greatest cellphone

[@filin9384]

Разбирали один двс а собрали другой, не кто не заметил двс разные 😅

[@karlisbarkans2106]

Чурки "капиталят" дизель в полевых условиях , так будет правильно на русском языке 🤣🤣🤣

[@vagsonmendonca4595]

Entra em ação o esquadrão demolidor não precisa nem esfriar o motor.Esses são azes.

[@Pakistani-Hands]

May be the engine got cold when they took action

[@michaelroberts1120]

Was the truck carrying a load of concrete when it broke down? If so, how would they have discharged it, because if it had stayed and become hard, it would have been all but impossible to remove.

[@Pakistani-Hands]

No, the truck was unloaded from the concrete. It was on a way back to the station after being unloaded from concrete on the work site.

[@Peter-le3ux]

👍👍🔝🇩🇪

[@comfort_zone-xp]

Tough time create strong man

[@lovistarpolsi1596]

mostly hated comment all came from cowpiedrinker

[@lntrlp4936]

Anyone know what the high for that day was?

[@puknut]

Not a single torque wrench was harmed in the making of this video!!

[@kemottomtr]

Not exactly rebuilding video. Just taking engine apart and replacing whats damaged. Nothing special at all.

[@JohnDoe-ml8ru]

"Rebuild" he says...

[@chrisgregory2269]

What torque wrench

[@vagsonmendonca4595]

As oficinas boca de porco,existe em qualquer lugar do mundo,o Brasil não é exceção.

[@ClifordNayawid]

No Torque wrench?how?

[@patrickbeecroft5423]

better off with an angle grinder

[@ARMZBASSz]

jurassic park enginering

[@RickOshay...]

A lot of editing going on here... There is a shit load of mistakes your not seeing... Stuff like leaks, fuel pump timing, electrical problems... Etc... With that piston smashed like that, What about the cylinders and head? They act like they fixed it overnight with a screwdriver and a 15mm wrench... Right?

[@itjustlookslikethis]

There was something dripping off the left side of the engine. you could also see dark wet spots on the engine block.

[@damianfiner]

ماحولیات کا خیال رکھنا شروع کریں۔ بظاہر یہاں گرمی ہے۔ یہ اور بھی گرم ہوگا کیا کرۂ ارض کو مارنا گناہ نہیں؟

[@GeneralSulla]

Only if you think you're immortal on Earth. Extinction is a rite of passage for all things living. 😂

[@toptaz15]

Obviously there are NO torque Wrenches in Pakistan??? Obviously one click of the elbow is good enough there,, I bet they don't offer a warranty on their work..... Not sure how they can give that a thumbs up,,, There was fluids leaking out of it everywhere And it was running like a chaff cutter.. I'm glad I don't live there and have to rely on those cowboys.. FFS.

[@СулимАрцаев]

звуки из мультика чип и дейл

[@JohnDoe-es5xh]

Hopefully the rotary vessel was empty, no ready mxed concrete inside ...

[@Pakistani-Hands]

It was going back to refill the rotary vessel after got it empty in the field. But unfortunately it’s engine got seized.

[@notyourechochamber3137]

There is a hell

[@РусиемЛатыпов]

👍👍👍👍👍👍👍😄