Emergency Fix For Blown or Leaking Brake Chamber DIY Step By Step Guide. How To Fix It Yourself

[@massivedee1168]

I know this is an old post....but would like to thank you for this video as it helped me get the truck off the TPKE and back to the yard great 👏

[@9872539672]

Thank you guys so much, saved me so many dollars from the roadside assistance. Very much appreciate you guys doing this. Keep up the good work. 👍

[@KoonTrucking]

Happy to help!

[@Fatamus]

Dido times two

[@-rattler]

You guys just saved me about 3hours tonight. Thanks!

[@KoonTrucking]

Awesome man! Glad we could help you out! Thanks for the comment!

[@kikotemxem]

Thank you guy my first year as a owner operator and this video got me out of the side of the road

[@SmittysSpareTimeProjects]

I had the service side blow out on me once. I took the service glad hand off, stuck a quarter between the glad hands, and put it back on the trailer. Used the Jake to stop the truck and downshifted all the way to 2 nd gear. Got her home safely. Lol

[@KoonTrucking]

Brandon Smith you are one of the few drivers that has enough sense to do it ! Haha most of my guys would scream send me a tow truck, a rental car, a motel room and some eating money !

[@codysimonson6260]

That's a pretty damn good idea actually with the quarter.

[@candygyrrl2002]

You saved me

[@stuabbott1]

I got trapped behind a truck for 2 hours today blocking the exit of an industrial estate. The air supply had snapped at the joint into the cylinder. .I couldn’t find how to do this at the time. I just found you helpful video thanks. I hope I never need to do it but good to know how it’s done.

[@raymondgonzalez9095]

Thanks for taking your time to show us how to do it.

[@shawnhooks3448]

Y’all just saved me a service call thank y’all so much

[@KoonTrucking]

Awesome !

[@leverttillman6539]

Thanks You all are ANGELS-rescuing us tears from darkness. SERVICE petro fuy pointed me in right direction. You all broke it dowm,down, I could get it done. I would say ..good SLOW PLEASE.. talk+illustration. We Are DRIVERS = dummies, when it comes too mechanical .Had too listen several times,too totally understand. But still THANKS ..MISSION ACCOMPLISHED . GOD BLESS YOU ALL 🙏🏽

[@Danogil]

I grew up in the trucking industry, my Dad owned his own company. 1969 to 2004. at the largest we had 60 trucks and around 85-90 trailers. mostly refer. i worked in the shop and drove.

[@danielleemans2474]

I was actually learning about this today at my trade school, it a coincidence that you posted this video. Great info as always thanks.

[@KoonTrucking]

daniel Leemans thank you for watching and taking the time to leave a comment ! I appreciate it very much !!

[@memopat1]

Great video , i have seen guys remove lines fold them and hold them in position with zip ties when there are no vice grips on hand

[@KoonTrucking]

memopat1 we have had to do that in a pinch also when a driver wasn’t prepared and had no tools with him. That’s another thing that I don’t understand. Why not have tools with you ?

[@memopat1]

Koon Trucking My top must have tools ,flashlifght ,hammer,cresent wrench,zip ties,duck tape,flat tip screw driver bare bones must haves. Hey how about video on that ??

[@markarmstrong3394]

Clay great video as always. Someday if I ever get down your way I want to meet y'all. Have a blessed day

[@KoonTrucking]

Mark Armstrong heck yeah ! It would be all my pleasure ! Come on anytime !! My doors are always open to you !

[@blakemcgee3050]

Yee Haw! Thanks guys! For them moments when u need a lil Cowboy to get it done.. 👌🏽

[@zxcorpionz]

Very , very helpful thank you sir.

[@ntime2095]

Thanks for saving my ass lots of money and time today!!!! Was backing up in my dock at my shipper and goodbye break chamber. Truck was stuck y’all got me going appreciate it fellas!!!

[@KoonTrucking]

That is awesome ! Glad we could help out. That’s exactly why we make these videos. Be sure to subscribe and check out my playlist “How To: Truck Fixing” videos there’s a lot of great tips and tricks on there to fix pretty much anything you will run across. Thanks for taking the time to leave a comment. I really appreciate it !

[@mattberg6785]

Take the cage bolts off the chambers and put them with your tools. When you need them they are clean and ready. Things don't always break on dry sunny days. Oh, when the rod breaks inside the can that's pretty cool .

[@scottpearsontoolsmore185]

Great video thanks brother. The socket and wratchet saves the hand to. Padded gloves are good with the wrench help save the hands. Sometimes it feels like it takes forever to get it caged. Thanks again keep up the great work see you in the next video

[@KoonTrucking]

Scott Pearson yeah I just bought a set of those mechanics gloves with the padding on the back. They seemed pretty sweet. I can see how they will save your hands.

[@malkitsandhu6968]

Tried caging the booster, but I couldn’t put it in the hole coz the spring inside was broken, and was in the way. In that case what shall I do to cage this thing. Thanks

[@j.c.smithprojects]

my luck is that it fails because of rust. when i try to cage the spring brake the can crushes in on itself....oh the fun of trucks that run in the beautiful ohio road salt!

[@KoonTrucking]

J.C. SMITH PROJECTS thankfully most of our trucks and trailers stay In the south ! Haha

[@truckinnuttz7038]

How about chambers that do not have cage bolt but has the bolted type chambers? Thanks for the video

[@DLSWV]

👍😉. Thanks for these videos. You guys are awesome.

[@KoonTrucking]

Thank you for watching!

[@christippin6244]

Couldn't find any vice grips. Unscrewed the spring hose from the pod and connected perfectly to one of the frame bolts. No air leak! Thanks

[@Danogil]

I had to change out the biscuits out myself so I always carried a couple with me.

[@mattmcmillan8920]

I like that, I picked this socket up off a tool truck just for this, must have been an M truck.

[@KoonTrucking]

matt mcmillan yes Bill has an M Word cage off socket. I have a Snap On one !

[@conozcamoselmundo3822]

Thank you ❤ we appreciate so much !!

[@jenseninterceptors]

If you cant cage the pot because the plug has come off and a caging bolt wont engage because of dirt inside there will removing the whole pot work as well?

[@anicetotrujillo6721]

Question do you have to do both chambers ? Are just one to move the trailer

[@Texasmarshall24]

Just the one that's locked up

[@trubz360]

So once I cage the brake chamber do I need to unadjusted the slack adjuster to get the brake pads off the drum

[@KoonTrucking]

Back your brakes off first

[@trubz360]

@@KoonTrucking thanks for the reply. You got yourself a new subscriber looking forward for more videos

[@KoonTrucking]

Take a look through my playlists and check out all the truck fixing videos we have. It can save you a ton of money. There’s many more on the way, just got to find the time to put them together and get them uploaded

[@exportconnections1550]

How do you check to see which one is the actual bad one if there's no air leak? Im getting return air when i apply the brakes or set the brake.

[@Vater1]

This just saved my tale and wallet thanks so much!! I couldn’t get the original off of the bolt off the problematic chamber but thank God the trailer had 1 of 4 on it. If it wasn’t for that I’d still be stuck. 😅😅😅

[@KoonTrucking]

That’s awesome ! Glad you were able to get it handled and save a little

[@mike-rn2ue]

Perfect

[@АртПро-ф3э]

Thank you

[@blee0518]

How long can someone ride on a patch like this? about how many miles is safe?

[@ahssansaas212]

Thanks for helping out

[@KoonTrucking]

Happy to help

[@fivestar000]

The cap on the break chamber should it alway be kept plugged in? Or it can just hang lose ?

[@KoonTrucking]

Pretty sure i just answered your question on another comment you left

[@zephyteh2628]

What if the caging bolt doesn't.turn .. after you put it in?

[@KoonTrucking]

Thank you Allah I haven’t ever seen that ? If you line the T portion of the caging bolt up and give it a quarter turn it should pull the spring back inside it ? I’ve never had one that was froze up ? I guess it’s possible the spring could be bad or broken if so you would need to change the entire chamber out with a new one.

[@zephyteh2628]

Koon Trucking without caging it?

[@mothernature6241]

How far can I go using this technique?

[@KoonTrucking]

Honestly until the DOT catches you and shuts you down.

[@mothernature6241]

@@KoonTrucking THANK YOU! VERY USEFUL INFORMATION

[@cgosier36]

How far can I drive like this?

[@Courtbeasy]

What if the brake can came off the brake chamber what do you do

[@martymc92]

I had the emergency line broke in one left from chamber , the t bolts were so rusted that I was not able to removed them. I used a lot of zip ties to clamp the emergency line so it would not leak. I took the emergency line out of the right chamber connected to the left chamber and unadjusted the brakes all the way up. Then I reconnected the right chamber and I was able to get out of the road. I just drove to the next truck stop and bought a new brake hose , replace it , adjust the brakes and hit the road again.

[@brianbell6158]

Must be very nice weather were you are cause up here in Canada you would never get the cage bolt out with the salt, snow, mud and ice it locks the bolt in the pot tighter then a nuns corset you would bust the pot before you would ever get the bolt out with a hammer it's funny what steel and aluminum does together

[@KoonTrucking]

brian bell yes we don’t have ice and salt thankfully !!

[@richardogarcia34]

Thank u

[@timekeeper5275]

Th Thank you for the video.

[@pollogli32]

Thanks

[@jasondelvecchio8720]

Long stroke with square bungs were the air lines go into chamber look like a 36-30 chamber

[@madamlastrange5605]

What causes the brake chambers to blow out ?

[@KoonTrucking]

Usually diaphragm fails or spring failure

[@joemcqueen8019]

That saved me thanks I appreciate it

[@Rudimentary007]

Great info channel.

[@tamilfire3372]

U helped me

[@johnclintonmusicandmore]

nice

[@mattberg6785]

Always carry some tie wire too. Way more durable than zippies

[@gregorabaileyein4685]

Like what driver going to have that screw

[@KoonTrucking]

They are in the side of the brake chamber unless someone takes them out

[@nyxline]

Good video

[@icemonk12]

That was a great video👍

[@KoonTrucking]

Lone Star Auto thank you ! I appreciate you watching and taking the time to leave a comment

[@artemwashere6103]

I couldn’t do it, there is an angle and I can’t push it in all the way.... sad....

[@nelsonabreu4878]

Same thing is happening to me right now because breaks are locked i guess i dont know what to do in this case

[@forkliftmatt6683]

Just deadjust breaks more fun that way hahahahah

[@KoonTrucking]

Hopefully this can save someone a tow bill or a service call and they can get it to a shop and save some money !

[@39FORTYWATER]

Ok

[@chrischiampo8106]

😎😀👍🏼

[@truckstop3990]

Emergency repairs should not be shown on a bench because we don't have emergency repairs that we do on a bench

[@KoonTrucking]

You realize we have to film to show how it’s done right? You realize how hard it is to get the camera and lighting needed to film right? So sorry this disappointed you for the “realistic effect” but we are teaching the proper and safe way to do the repair. Just film yourself doing one on the side of the road the next time it happens but make sure it’s clear so people don’t complain about it and send me the link and I can take this one down 🙄

[@jasondelvecchio8720]

Buy the life seal Chambers no need for that pain in the butt cage tool

[@nodirjonzakirjonov3172]

15th qx

[@freebir73]

THANK YOU FOR THE INFORMATION. 👍👍👍👍