EMF 1851 Navy US Marshall Deluxe | Fancy Black Powder Reproduction

The EMF 1851 Navy US Marshall Deluxe is a great looking and good shooting Black Powder revolver. This one is chambered in .44cal and features a polished steel, laser engraved design with a brass grip frame and walnut grips. The very short loading lever makes it somewhat of a pain to load, but shooting it is lots of fun!
Champion Traps and Targets LE B27 Black Police Silhouette Target (Pack of 100) , 24" x 45":
amzn.to/3nmtRXE
Arizona Ghostriders
/ @arizonaghostriders
Guns Of The West
/ @gunsofthewest
Chuckin'
/ @chuckintv
Squib Load
/ @squib1911

[@SmallCaliberArmsReview]

For those wondering, I finally bought one of the SliXHand loading levers!

[@mikethomas5412]

This would be great in a 38cal conversion. The design of these guns is gorgeous. I'm just too lazy for black powder 😂

[@SmallCaliberArmsReview]

Yeah, that would be sweet! It' is definitely a lot more work!

[@mikethomas5412]

@@SmallCaliberArmsReview Labor of love, I'm guessing...lol

[@SmallCaliberArmsReview]

@@mikethomas5412 I really do like them, but there's a reason I don't shoot them very often!😁

[@bunkstagner298]

Then you are missing the fun. and that is a shame.

[@terrysmith-z4l]

Basically intended for 31 cal ball, the 38 would blow it up.

[@clffreak]

Great video! As for the loading lever, you can put a piece of pvc pipe on it to make it longer and sooo much easier to use.

[@SmallCaliberArmsReview]

I think I'm going to pick up one of the Slix loading levers, they're made to fit several different black powder revolvers. Thanks for watching!

[@terrysmith-z4l]

I knew it somebody would want plastic or such on their gun.

[@snappers_antique_firearms]

Good looking gun Richard. When i shoot my guns with the short loading levers. I use a round pipe as a cheater bar. Also eras gone bullets depending on the conicals they are copys of conicals used in the civil war. They were made oversized during the war so it could be used in all makes and models of revolvers. That plus replicas chambers are a little bit smaller by a few thousands then the originals were made. Being the bullets are oversized if its not cast out of pure lead its a bear to load. If you plan on shooting mostly conicals its worth reaming out the cambers a little. or make sure you use pure soft lead.

[@SmallCaliberArmsReview]

One of those off-the-gun loaders would be nice. Not sure how regularly I'll be plinking with this thing! The bullets performed very well, I think I need to buy my own set of molds from Eras Gone. Thanks for watching Snapper!

[@jlbksinger]

Nice looking 1851 Richard. Good shooting, the Kerrs were cast with pure lead, so a cheater bar seems to be needed for shorter loading levers.

[@SmallCaliberArmsReview]

Thanks James! The really bad part about the short lever is the sharp edge of the latch, digging into my palm. The bullets shot great by the way. Thanks again!

[@8626John]

Good review and good looking gun. If I recall correctly, the 1851 Navy was Wild Bill Hickok's favorite sidearm.

[@SmallCaliberArmsReview]

I think it may be mine too, at least as far as cap and ball pistols go. Thanks for watching!

[@ArizonaGhostriders]

Very smart looking pistola! I like the bare steel.

[@SmallCaliberArmsReview]

It does look nice, but it's a pain to load! Thanks for watching Santee!

[@sasquatch885]

You should get yourself a Polish capper and do a video review on it. I’ve tried every style of capper and it’s the only one that works well.👍🏻

[@SmallCaliberArmsReview]

I keep telling myself to get one, I just haven't done it yet. Thanks for watching!

[@mishas_guns]

Great video! I chuckled a bit when you realized you didn’t record the first time you were shooting steel. Very relatable

[@SmallCaliberArmsReview]

It's tough being a one person film crew! Thanks for watching!

[@bunkstagner298]

this gun with The Howell cartridge conversion using the .45Cowboy Action Special (.45 Short) is also a great gun to shoot. Mostly i shoot mine as as Col. Colt intended as a percussion gun. With rea; gunpowder of course either way.

[@SmallCaliberArmsReview]

I'll bet it is fun. I like them with the loose stuff, too. (I'm just not a fan of the cleanup afterward) Thanks for watching!

[@larrys-qr6zr]

I have the same type of capper which I modified to fit the 1858 Uberti. It is not perfect, but it works. i also use a wood dowel to make sure the caps are seated.

[@SmallCaliberArmsReview]

I can do a little filing on the capper to make it fit a little better. I do have a couple others that I haven't tried yet. I used a piece of cedar that I whittled down one end of for "Cap Pushing". Thanks for watching!

[@sogdal1]

That is a real pretty gun!

[@SmallCaliberArmsReview]

I agree! Thanks for watching!

[@anangryranger]

A steel tube can be slipped over the short loading lever, acting as a "cheater bar" to increase leverage.

[@SmallCaliberArmsReview]

Yeah, that would surely help. Thanks for watching!

[@ErronKebabb]

What a handsome gun! Grips, stainless, brass, scribe and all ! Didn't notice at first but the front sight post bringing the brass forward really ties it together ace! Been dreaming of dressing up my North American Arms Earl Companion, it's really lived up to it's likeness.. with new shooter friends it's size is approachable, the real history is fascinating, and cap/ball loading lends time for appreciating safety and handling! Have you made a video on black powder cleaning? I've always used TC No. 13 Bore Cleaner, around the frame and soaking the cylinder/nipples, but Hickock45 always mentions his love for Ballistol, many others mention Shooter Lube, some mix up their own, I'm curious on changing my cleaning regime and/or supplies.

[@SmallCaliberArmsReview]

I have not made a black powder cleaning video yet. I have used a lot of different things though. I will use #13 bore cleaner from time to time to swab a long gun barrel on the range between shots. I will often take a pistol apart and scrub it up in the kitchen sink with a nylon brush and some Dawn dish soap. I make sure I dry them thoroughly and oil them up before putting them away. I've also seen lots of different methods and cleaners, I have no idea which one is the best though. Thanks for the comment and thanks for watching too!

[@josephsimmons7889]

The pop a cap bit was my favorite haha great review very informative!

[@SmallCaliberArmsReview]

Glad you liked it!! Thanks for watching!

[@Gunsmith-4570]

Slix Springs, (Slix shot nipples) make a tool called the Slix hand to help with short loading levers. I got one for my 1860 army Sheriff model it helps a lot, it is also non marring aluminum. Like your loading stand.

[@SmallCaliberArmsReview]

I have one of the Slix Shot nipple wrenches, it's very nice. I'll have to check out some of their other stuff. Thanks for watching!

[@grahammedlock3094]

Thats very interesting, my 1851 Pietta Navy Sheriff .44 doesn't put up nearly as much of a fight. I'm just using round ball and measured powder horn. Great video and very neat revolver.

[@SmallCaliberArmsReview]

I picked up one of the SlixHand, loading tools. It should make the wrestling match a little easier! Thanks for watching!

[@guyguybohurst3304]

There are companies that sell an extension handle that fits over your loading handle, which extends the length of the loading handle, giving you more leverage for ramming Home your projectile and powder charge and protects your hands. I got mine from Slick shot. The same place where I got my upgraded cap nipples.

[@SmallCaliberArmsReview]

Yep, I picked up the Slixhand a couple months ago. Still haven't had a chance to try it out yet. Thanks for watching!

[@bluescatreimer]

By the way, that's a great looking revolver! I use the Guns Of The West cartridge former kit too.

[@SmallCaliberArmsReview]

When you get the hang of it, it can go pretty quick. Did you know if you don't put the bottom piece on the paper cartridge, all the powder will pour out of the bottom when you pick it up! Weird! 😕🤠😂

[@bluescatreimer]

@@SmallCaliberArmsReview That is weird. 🤣😂

[@DJb-ill219]

Put a little hollow pipe on the end of the loading lever give you more leverage Cool Gun 😎 first time I've seen the paper cartridge with conicals

[@SmallCaliberArmsReview]

I recently purchased a SlixHand, loading lever tool. I'll do a video on it in the future. Thanks for watching!

[@timfoley3189]

Thanks for explaining the difference between 10's and 11's.

[@SmallCaliberArmsReview]

Happy to help!

[@charliesierra6919]

Beautiful piece. I'm a sucker for the shorter barreled "sheriff" models. It helps to use a longer "cheater" bar (pipe) over the loading lever to give you more leverage, MUCH easier. Plus, I like that .44 punch. If it has a steel frame a gated Kirst conversion would be nice on this model.

[@SmallCaliberArmsReview]

I keep saying I'm going to pick up one of the Slix Hand levers, I just keep procrastinating! A cartridge conversion would be great for this one! Thanks for watching!

[@georgeaura]

Beautiful gun definitely seems like a workout

[@SmallCaliberArmsReview]

No pain, no gain! Thanks for watching!

[@anthonygalliart1789]

I love the look but the slowest I want to go is loading a SAA ... Have owned many cap & ball revolvers but I'm too lazy to shoot them any longer. I actually had a couple years when I had 2 brass framed 58 remington sheriff copies in .44 that I used for home defense. I shot them often and they were reliable and the only legal firearms where I was living. My neighbor had 2 .36 cal 51 Navy clones for his home defense. In a way this gave me extra respect for the fellows who had no choice but to carry pistols of this type in the past. Thanks for the video muchacho:-)

[@SmallCaliberArmsReview]

There are times when I think; "do I really want to do all of this?" They are definitely a lot more work than cartridge guns but they can be a lot of fun. Thanks for watching!

[@blackpowderfirearmenthusia3194]

Good looking revolver, thanks for sharing.

[@SmallCaliberArmsReview]

Thank you for watching!

[@ericgleixner4074]

You need to file down the corners of the capper so it will fit right. You'll be amazed at how well it works after that. For the loading lever they sell a tool to extend the loading arm when loading. Or you can find a small metal tube to slide over it to extend it as well just like the tool they sell extends it. I hope this makes it easier you should enjoy using your Navy a lot more after this.

[@SmallCaliberArmsReview]

The Slix-Hand is a great little tool that works with several of the short handle revolvers. Guns of the West makes a good little capper that will work on several different revolvers too. I have seen modified cappers, I just haven't tried filing mine down yet. Thanks for watching!

[@user-kg2ez1eg2y]

Classic forever 👍

[@SmallCaliberArmsReview]

Of all the black powder revolvers made, the 1851 is my favorite. Thanks for watching!

[@DeucesWildRC]

Sweet 51 Marshall, thanks for sharing, I wouldn’t mind trying Dustin’s paper cartridge kit out one day as well as conicals, I’m sure they hit harder than round ball

[@SmallCaliberArmsReview]

Give his kit a try, once you get the hang of it, they're pretty easy to make. Thanks for watching!

[@leedaily5821]

Short peice of pvc over the loading lever helps for more leverage.

[@SmallCaliberArmsReview]

I recently picked up a SlixHand loading tool, I hope to do a video someday. Thanks for watching!

[@doranmaxwell1755]

I have the Colt pocket 31 and the 36 51 navy and the 60 army 44.. Did a little cyl/bore matching on all of em and then decided to nickel plate em. which is kinda practical on a BP gun... Soo I plated the barrel and cyl and grip frames. anything color case hardened I left alone. Really.. plating these guns was practice for a couple of other guns I have like a really rough model 19 target. I think they really came out nice. even plated the inside of the cylinders hoping it will help with corrosion prevention.

[@SmallCaliberArmsReview]

I'm wanting to give plating a try. I have a silver plating kit I bought so I could refinish a shaving razer. I really want to give all of it a try. Thanks for watching!

[@doranmaxwell1755]

nickel plating is really easy and cheap. you can make the solution yourself for almost free and a cell phone charger will work (with mods) for the electrical.. lots of youtube vids on this. I would suggest tho that with either silver or nickel that you use a copper barrier first. that is also simple but... adds to the process LOL @@SmallCaliberArmsReview

[@alvintarrer6914]

Good honest review,I've seen extention tool leverage on G.O West from slix shot...good job 👍☕️☕️✌️

[@SmallCaliberArmsReview]

Yeah, I still haven't ordered one yet! Thanks for watching!

[@savageater57]

I bought a pair of those @25 years ago, the Marshal and Sheriff's model , they are stainless steel. I've never fired them just put them in a shadow box and hung them on the wall

[@SmallCaliberArmsReview]

This one is not stainless, but a heat treated bare steel. I do have a stainless New Model Army revolver. If you ever decide to fire yours, get a cylinder loading tool or a loading lever extension from Slixprings. Thanks for watching!

[@bleighton8994]

Look up Slix Hand, helper for your short loading lever

[@SmallCaliberArmsReview]

I have, I just haven't ordered one yet. Thanks for watching!

[@KeithStevensMoes]

Great video, cool looking C&B thanks for Posting!

[@SmallCaliberArmsReview]

Thank you for watching!

[@JWheeler331]

Yeah those short levers are tough to get the bullets seated. Good looking revolver though.

[@SmallCaliberArmsReview]

I agree! Thanks for watching Joe!

[@doranmaxwell1755]

I would check to make sure the cylinders were not way undersize. I ream mine to a thousandth or so bigger than bore size. this makes it easier to load and of course with the right size ball now (not undersized) a tad more accurate.

[@SmallCaliberArmsReview]

I'm just relying on the factory for the sizes. It may not be 100% accurate but I just don't have the tools to make those changes. The biggest issue is that tiny little loading lever! Thanks for watching!

[@TheLoneRanger745]

Wow It's Beautiful 😍. The duelist explains the grooves not only to they hold lubrication but they also blow outward into the barrel rifling causing better traction into the lands and grooves . "The Duelist" Mike explains this on his channel. Also there are different sizes balls

[@SmallCaliberArmsReview]

I've watched many of his videos. Thanks for watching mine.

[@greywendigo7026]

Things gorgeous

[@SmallCaliberArmsReview]

It is! Thanks for watching!

[@user-ts1fp4nm9y]

I believe someone makes an extension for that loading lever,or maybe a small pipe to slide over it.

[@SmallCaliberArmsReview]

SliXprings make a tool called the SliX Hand. It fits most BP revolvers with the stubby little loading arms. Thanks for watching!

[@johnlea8519]

A real nice looking revolver I wouldn't mind one in .36 calibre.

[@SmallCaliberArmsReview]

That would have been cooler! Thanks for watching!

[@samostroff9341]

Great video! That looks like a lot of fun to shoot, That loading lever is a challenge, but a fun challenge! Would the paper cartridges work just as well with a round ball? Wasn't sure if the paper needed the conical shape of the bullet to grab on to.

[@SmallCaliberArmsReview]

SlixSprings makes a cheater for the loading lever, I may pick one up. I have made several paper cartridges with round balls, this was my first time using conical bullets. I think the conicals are easier to glue up.

[@paulbervid1610]

Very nice

[@SmallCaliberArmsReview]

Thanks!

[@davidbeasley2853]

Mine loads smoothly. Think you're buddy gave ya some tinny lead.

[@SmallCaliberArmsReview]

I may have to try some store bought round balls and see how it does. Thanks for watching

[@RevoZ0]

Definitely bro them bullets look like aluminum cans definitely not 100% lead

[@jarkoer]

Makes me wonder if they make some kind of metal tubing that could slip over the loading lever to give you more leverage.

[@SmallCaliberArmsReview]

Slixsprings does. It's a pretty neat tool made from aircraft aluminum and will fit several different models and sizes.

[@colt1851navy]

Very sharp

[@SmallCaliberArmsReview]

Thanks!

[@Hohmies86]

I’m brand new to this, does the lube hinder the amount of time you can keep it in the chamber and still fire? Is the lube a must? Also, good on you for using ear plugs. I’m 38 and the Marine corps destroyed my eardrums, can’t hear certain birds

[@SmallCaliberArmsReview]

You know, I don't know how long you could leave the lube in there before it actually affects the powder, but if the lead roundball is the proper size, and there is a small ring of lead shaved off when it is seated, the lube should never touch the powder. I may have to load one up and let it sit for a year or two and see what happens! Hearing is one of those things that people don't think about until it's too late. I also have a phobia about having my ears covered so I like to protect it as much as possible. Thank you for the comment, thank you for your service, and thank you for watching!

[@terrysmith-z4l]

I will take 6 of em, sweet guns, no polymer here.

[@SmallCaliberArmsReview]

Get one of the Slix Hand loading tools, your hand will thank you! Thanks for watching!

[@cowboywoodard2569]

Yep still deadly like they were back in the Day, stone cold Grave Yard Dead

[@SmallCaliberArmsReview]

They are effective.

[@BillyBlaze7]

i really wish you hadnt sped the video up on the part where you made the paper rounds, on at least one of them, and instructed on what you were doing.

[@SmallCaliberArmsReview]

I did do a video on the paper cartridge kit by itself, you can check it out here: kzbin.info/www/bejne/Z3rXqJx9mMSdrtksi=qr96T81QdH5UF_rK

[@BillyBlaze7]

@@SmallCaliberArmsReview Thank you for this, i will go check it out now.

[@craigcook1571]

They make a slip on lever extender

[@SmallCaliberArmsReview]

Yep, I added one to my cart! Thanks for watching!

[@kartapuce3814]

Put a cloth in your hand to force the bullet, it will make it easier :)

[@SmallCaliberArmsReview]

I agree!

[@Joe3pops]

They would look better with the flute cut about half its normal distance IMO.

[@SmallCaliberArmsReview]

I don't know, that might be a little too short. Thanks for watching!

[@josephhaack5711]

Does the rammer deform the conical bullet? Most change out the lever with an Uberti for conicals

[@SmallCaliberArmsReview]

I'm sure it will a little bit, but not like a piece of chewing gum. It most likely leaves a little ring where it contacted the round. Thanks for watching!

[@jeremiahbeck3292]

Hey Richard are you going to make a john wayne holster

[@SmallCaliberArmsReview]

I have been looking into making one of his holsters, I just don't know when I'll get to it.

[@jeremiahbeck3292]

@SmallCaliberArmsReview okay well I look forward to your next leather making video

[@SkunkWorksRifle]

Nice video, what kind of camera on the target and does it have a timer to start videoing 👍

[@SmallCaliberArmsReview]

I just use my cell phone for my second camera. The problem I had was thinking I had hit stop before I moved it, instead I hit stop AFTER I moved it. I'm sure there will be other mistakes! Thanks for watching!

[@SkunkWorksRifle]

@@SmallCaliberArmsReview thanks, I'm going to try to video impact at 1000 yards and trying to get a cheap camera with timer to video 👍

[@SmallCaliberArmsReview]

@Skunk Works Rifle 2 I have a Caldwell target camera. It's not really cheap, but it sure makes those long-distance shots easier to record.

[@SkunkWorksRifle]

@@SmallCaliberArmsReview yes, I have seen those, really nice for sure 👍I'm going to find one I can setup at the target and record impact, one with a timer to give me enough time to get back to make the shots, one man operation here on a shoestring budget....I hardly ever get anything done 😂😂😂I do have an old phone I'm going to try to use next time I go to the range, 600 yards is scheduled for that shot, working on ammunition at this point, going to try to video 👍

[@SmallCaliberArmsReview]

I have set the camera up, hit record, and walked back to the 100yd stand. There's usually a lot of empty footage to scrub through before I get to the impacts. Not to mention I need to catch my breath before I try to take a shot!

[@cdarrinford]

Do you take orders for holsters. I'd love to have that in Lefty.

[@SmallCaliberArmsReview]

Sorry, I do not. I've thought about doing some when I retire, but I've still got a while till then. Thanks for watching!

[@the1knifepro169]

What was the lead mix and what's the diameter of the chamber throat?

[@SmallCaliberArmsReview]

Whatever Hornady uses, I assume "pure" or "dead soft" for the lead. I have no idea what the diameter is, I never checked it. Thanks for watching!

[@webincomeincome8767]

Is it the camera angle or just me but this guy looks like he is left eye dominant but shooting right handed. If so seems really hard to hit anything.

[@SmallCaliberArmsReview]

Not the camera angle, I am right handed and left eye dominant. I do use a rifle with my right eye though, it'd be hard to look through a scope shooting right handed and using my left eye. Thanks for watching!

[@GenderSkins]

I think that is a gun you would need a bench loader for, or just remove the loading leaver and use a ball starter for a muzzle loader to load it with. As to load it the way you are, looks painful.

[@SmallCaliberArmsReview]

Slix Springs makes a cheater for loading these revolvers with the short levers, I'm probably going to pick one up. Thanks for watching!

[@ralphperez4862]

Love your channel man. That revolver is really cool looking. Earlier this year I got a Traditions 1851 made by Pietta. It is a 36 caliber. Still, it's fun. I should take it out this weekend and try shooting it again. By the way, I too have Dustin's kit. I like it but it's for 44. I need to get the new mandrill for 30 gr loads. Those are my favorite loads for the 44's, brass or steel. Anyway, I thought I'd share. Your channel is very polished. Mine is all straight up Homie! Ha. Enjoy. kzbin.info/www/bejne/n56WfXiFYtt9hqM

[@SmallCaliberArmsReview]

Thanks! The '51 Navy is my favorite BP Revolver and .36 is my favorite BP caliber! If you get one with the short loading arm, the Slix Hand is a MUST! Thanks for watching! I'll check out your channel.

[@ronaldkennedy2401]

Slip a foot long length of pipe over the loading lever and no more struggling.

[@SmallCaliberArmsReview]

Slixprings makes a nice loading lever "cheater" out of aluminum that won't hurt the finish of the gun. I may have to pick one up someday. Thanks for watching!

[@terryfowler6090]

Now you know why the real ones had longer barrels and rammers.

[@SmallCaliberArmsReview]

Oh, yeah!

[@tomlubas1512]

Need a cheater bar for loading lever

[@SmallCaliberArmsReview]

Yes, definitely!

[@rogergoodwin5533]

Will you sell us some percussion caps? #11 s

[@SmallCaliberArmsReview]

I've seen them on the shelves recently. I only have a couple tins as it is.

[@ronaldkennedy2401]

very nice gun.and steal,not brass.midway has it right now for $470.i think I hear it calling my name ...

[@SmallCaliberArmsReview]

That short loading lever is a bear, but there are ways around it! Enjoy, be safe and thanks for watching!

[@TimShooks]

Great video! I bought one of those 2 years ago and I love it. I have a piece of brass rod. I drilled out to fit on the loading lever and then I have a stand loads of cylinder in. I would bet my life on it has never failed me in that 2 years that I've had it. It is myself defense gun nine times out of 10

[@gwendolynholloway8334]

Can u make my grandson a holster

[@SmallCaliberArmsReview]

Sorry, I don't currently make holsters for people. Maybe when I retire someday.

[@michaelhayes7471]

I use a cylinder loading stand Dixie gun works sell them

[@SmallCaliberArmsReview]

I've seen them but I think I might pick up the lever extension that Slixprings offers. Thanks for watching!

[@norbertocarena2394]

Soy tirador con armas de avancarga y puedo dar fe de que este hombre dio verguenza ajena con la carga de ese revólver. Primero mostró en ¡cámara rápida! como arma cada cartucho, parte por demás interesante para cualquier tirador, luego, no supo como utilizar el dispenser de fulminantes, después intentó carga el arma sin apoyo y lo vimos en una lucha estéril contra la misma, inclusive con el arma cargada apuntó varias veces a la cámara, al final decidió hacer las cosas como corresponde, pero tardando tanto y haciendo tanta fuerza que cualquier persona que desee introducirse en esa hermosa especialidad se desanima al pensar el trabajo que cuesta cargar un revólver.Es una pena. (me hubiese gustado leer que decía pero no está traducido al español).

[@SmallCaliberArmsReview]

Yo mismo tengo muchos cargadores de avancarga. Este es el único que tengo con la palanca de carga muy corta. Estaba demostrando la dificultad de cargarlo sin ningún tipo de herramientas de ayuda en la palanca. La herramienta de cebado que estaba usando es una hecha específicamente para rifles de avancarga y no encaja en el cilindro sin modificaciones ni en el cilindro ni en la taponadora. Tengo varios otros que tampoco funcionan con revólveres, pero este era el más cercano. Tengo varios otros videos sobre diferentes revólveres de pólvora negra que funcionaron absolutamente sin problemas, tal vez deberías verlos. No estoy tratando de desanimar a nadie, solo señalo que es posible que desee utilizar herramientas diferentes si va a utilizar aquellas con palancas de carga muy cortas. Gracias por ver.

[@tomcatt1740]

nice gun I hate this where ya get it?????????????????????????!!!!!!!!!!!!!! and why do I have to ask show it off show where to get it duh ! hard...

[@SmallCaliberArmsReview]

Wait, are you asking where I got it? If so, it was Midway USA. Thanks for watching!

[@Tammy-un3ql]

👍👍👌👌

[@SmallCaliberArmsReview]

Thanks!

[@laurentnavarre9915]

Hello. Why navy ? Us marshal was not navy !

[@SmallCaliberArmsReview]

It doesn't have anything to do with the branch of service, but the battle scene engraved on the cylinder. It's a little misleading. Thanks for watching!

[@eliinthewolverinestate6729]

I use my 1851 for muzzle loader hunting.

[@SmallCaliberArmsReview]

We could use the .44 caliber, long barrel version for deer hunting in Ohio, just not the US Marshall Deluxe. The 1851 is one of my favorites. Thanks for watching!

[@eldorado1954]

I have Slix Hand tool...but not gun...😅

[@SmallCaliberArmsReview]

Well start looking! They're lots of fun!

[@eldorado1954]

Order yesterday...because it's a very beautiful gun. (Also with what ever need for shooting)

[@SmallCaliberArmsReview]

@@eldorado1954 I hope you enjoy it! Be safe and have fun!

[@eldorado1954]

Thank you. BTW , next month Kirst konv. cylinder. (It was my plan from beginning)

[@SmallCaliberArmsReview]

@@eldorado1954 Very cool! You won't need that SliXHand very long then.

[@cowboywoodard2569]

Getting a cheater pipe on that ram rod

[@SmallCaliberArmsReview]

Yes Sir, I'll be getting one in the future! Thanks for watching!

[@garywilliamson9697]

I use a snail capper with mine.. it works great..

[@SmallCaliberArmsReview]

Thanks for watching

[@sltorres101]

use a cheater bar.

[@SmallCaliberArmsReview]

I plan on getting one of the Slixhand bars. Thanks for watching!

[@13bravoredleg18]

Get a Slix-Hand…

[@SmallCaliberArmsReview]

I ordered one, should be here tomorrow. Thanks for watching!

[@rogertagtow5636]

You would be in trouble if the Indians were after you

[@SmallCaliberArmsReview]

Better hope there's not more than 6, and you're a really good shot!

[@danielboster1861]

Make yourself a cheater to load.

[@SmallCaliberArmsReview]

I finally picked up one of the Slix-hand loading tools. Thanks for watching!

[@billdlyaegra9394]

where's the whiskey? silly in the extreme. caps are tough to come by and far too expensive for drying the nipples, just swab with a pipe cleaner dip in naphtha if you want. the revolver isn't any real navy and its ugly too with that ostentatious laser engraving. a dowel will do fine for making paper cartridges somebody making money on stuff not needed. everybody knows those cappers don't work. i can't get through the whole video but i hope you ended it by saying april fools.

[@SmallCaliberArmsReview]

Thanks for watching as much as you did.

[@joemorganeatmyshortschannel]

Very cool

[@SmallCaliberArmsReview]

Thanks Joe!

[@BanzaiYoutubeChannel]

When is the next holster video? :)

[@SmallCaliberArmsReview]

I'm not sure, but I hope soon. I like to do the holster videos when the weather is not so good, I really like being outside!

[@yuanfengzang1370]

可以购买吗！我在中国

[@SmallCaliberArmsReview]

我在美国这里可以买到。

[@INeverMetAGunIDidntLike]

Have you tried SliXpring's Slix Hand tool yet? If so, how do you like it? I'm thinking about getting one.

[@SmallCaliberArmsReview]

I have not. From some of the others I have talked to, they say it's a must have.