How to sublimate on EasySubli. Siser EasySubli

How to sublimate on EasySubli. Siser EasySubli #Sublimation #howtosublimate
Join me while I show you how to sublimate on Siser EasySubli from mycraftsource.com ‪@MyCraftSource‬
GET SOCIAL WITH EMMA
🌳 linktr.ee/emma...
This link will provide quick links to Facebook, TikTok, and all my favorite products!
🥤 SISER EASYSUBLI USED IN THIS TUTORIAL: mycraftsource....
🥤 DESIGN USED IN THIS TUTORIAL: designbundles....
🛒 OTHER TOOLS AND MATERIALS: (Links = Affiliate Links)
Butcher Paper Roll
amzn.to/3fCqdT4
Wrapping Paper Roll Cutter
amzn.to/3rZXlsW
Parchment Paper / Sheets
amzn.to/2VAwI1f
Heat Press
mycraftsource....
Heat Resistant Tape
amzn.to/2VrrK7w
Tape Dispenser
amzn.to/3CjLKtc
Links included in this description might be affiliate links. I earn from qualifying purchases which helps me to bring tutorials such as these to you!
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
CHAPTERS
00:00 Welcome to Emma’s Cottage
00:25 Let’s talk about Siser EasySubli
03:00 This is a “Workaround”
04:40 Cricut Design Space
04:55 how to remove the grid lines
11:40 How to close the gap on images in Design Space
13:50 how to contour in Design Space
19:36 placing the EasySubli on the cutting mat
22:40 Cut by hand the Sublimation print
23:30 Heat Press temp for Sublimation
23:50 weeding the EasySubli
27:00 softly pulling the EasySubli off its backing
29:39 Pressing the Sublimation print unto the EasySubli
30:40 Separating the Sublimation print from the pressed EasySubli
33:38 preparing the shirt
37:04 Let’s talk Glitter HTV
37:30 Let's press the EasySubli to the shirt
38:00 Comparing HTV Glitter to EasySubli
39:30 Thanks for watching!
⚠️ DISCLAIMER: Use this information at your own risk. Emma’s Cottage or anyone connected with Emma’s Cottage, in any way whatsoever, can’t be responsible or held liable for any injuries or damages resulting from your use of the information contained in or linked from the Emma’s Cottage videos. It is your responsibility to use all tools and materials safely and take all steps necessary to ascertain that the information you receive from this tutorial is correct.

[@EmmasCottage]

GET SOCIAL WITH EMMA 🌳 linktr.ee/emmascottagediy Follow this link to join our Facebook group, follow me on TikTok, plus links to all my favorite products and websites!

[@loribeal8197]

I just converted an Epson ET-2400 to a sublimation printer and printed on the Easy Subli without issue. I chose photo semi gloss paper and high quality for the color. No wheel marks and it turned out great.

[@EmmasCottage]

Thanks for sharing! I’ll have to try it!

[@ErinNorthcuttEvans]

I do too. Never had an issue.

[@Healthylivingwithwendi]

I have a question about the Easy Subli. I just bought some over Christmas a long with a printer. Only issue is, it says there are 4 sheets in the package. There are 4 larger white ones the size of paper, then 4 smaller ones that are weird. There is nothing on the package to tell me what they are. I’ve been watching videos to see is someone will show them and explain them to those of us new at this, but no one is doing that. Help

[@EmmasCottage]

If you enjoyed this video, please give it a THUMBS UP and SHARE the video with a friend as it helps me in the KZbin algorithm! 😀 👇 COMMENT BELOW 👇

[@cherylrubio6121]

YOU ARE AMAZING!!!! I wanted to make hoodies for my grandson's hockey championship game this weekend and after watching your video I am SO PROUD to say they came out beautiful!!! You are great at teaching and explaining Thank YOU!!!!

[@EmmasCottage]

That is so wonderful! Thank you for sharing!

[@sueshade5609]

Thank you! The tutorial in printing from Microsoft helped me have a way to print larger from Cricut without the pixalation I sometimesn had occur in other formats. I enjoy your channel!

[@EmmasCottage]

I’m so glad it helped! Thanks for watching!

[@verapanzier9810]

Absolutely the BEST explanation video I have came across !! THANKS so much for helping us become better crafters !

[@EmmasCottage]

Happy to help!

[@pattyvargas1627]

Very good explanation. I love watching you. You explain everything. I feel you go the extra step to make sure we understand. Thank you

[@EmmasCottage]

Glad it was helpful! Thanks so much for your feedback!

[@casiscreations9621]

Thank you so much for being very detail. Initially I thought the video was going to drag because its pretty long. But I was wrong, You discuss all my concerns. Thanks again. Great job! My project came out great.

[@EmmasCottage]

Oh believe me, I agree, too long! I always strive to speed it up but don’t succeed as there are too many fine details! Thanks for watching and sharing your comments!

[@bedelov10]

I have tried easy subli multiple times and have screwed it up EVERYTIME being it's not exactly cheap stuff I gave up on trying but watching your video tonight changed my mind! I'm pulling out my easysubli and back at it tomorrow I'm SO excited now thank u for explaining everything step by step so well in ur videos!! Thank u thank u thank u!!

[@EmmasCottage]

Good luck! Be sure to use the same type of parchment paper, I’ve heard other brands may not work.

[@ruthybarretta7955]

I am so glad I found your videos

[@EmmasCottage]

I happy you found me too!

[@kayesmith4401]

I always use my Epson 15000. The colors come out vibrant too. Great job. I love this product, spendy, but a great product.

[@EmmasCottage]

Thanks for watching!

[@maureenbaker475]

Oh my gosh! This is awesome. So happy I found your tutorial. I tried it and it work perfectly! so good!!!!! Thank you so much :)

[@EmmasCottage]

You're so welcome!

[@peggymclane1673]

Im so glad I found you. I was ready to throw out the box of easy subli. Nothing worked for me. I am ready to try this. I absolutely love that you respond to all of your messages from your followers. You have a new fan here ❤️

[@EmmasCottage]

Glad I could help! Thanks so much for watching and commenting!

[@Martina2560]

That was the BEST EVER video I’ve seen explaining EasySubli! Your videos are always so good and informative! Thank You so much 😊

[@EmmasCottage]

Glad it was helpful! Thanks so much for being a valued subscriber!

[@BLoveOfGod]

Thank you so much. You are awesome, I love your tutorials. This is exactly what I need.

[@EmmasCottage]

Happy to help!

[@kimberleastuparyk1811]

Thank-you for your very educational video. I used the snipping tool method to print a large design I created in Design Space that I did not want to use print and cut. It worked perfect!!! Thanks again for sharing your knowledge with us!

[@EmmasCottage]

Nice work! I am so happy to hear it worked for you!

[@georgialewis7645]

Love the details you put in your videos.

[@EmmasCottage]

Thanks Georgia! I appreciate the feedback!

[@mothermayi7832]

you have a new sub. i love watching you do your magic.

[@EmmasCottage]

Thank you so much!!

[@edcinco6624]

I keep rewinding at the 25 minute mark, which side did you place downside and which side was used to sublimate on?

[@EmmasCottage]

Sublimate on the rough texture side. The shiny side is the adhesive that will adhere to the fabric

[@andiwilliams6015]

Thank you Thank you Thank you! This information was great - I just successfully made myself a black tank using EasySUbli this morning thanks to your great directions! Love your channel!

[@EmmasCottage]

I’m so happy to help!

[@donshellum6986]

Wow, you are full of energy....love it Thanks for sharing how to sublimate on easysubli. I think I can actually do it now.

[@EmmasCottage]

You are welcome! Thanks for watching!

[@kimberlyleon2147]

Love your tutorial. ❤

[@EmmasCottage]

Thank you! 😊

[@haylx0]

So excited! I haven’t even watched it yet, but a company I order vinyl from sent me the wrong order and it had this in it. They let me keep the order and I haven’t used it yet bc I am clueless! Now the best teacher gets to walk me through it !!!!!

[@EmmasCottage]

That is a WIN in my book! I can't wait to see what you create! I hope you will share it with me!

[@diannaofodile7727]

thank you, thank you for this video. newbie, this helped so much.

[@EmmasCottage]

Happy to help!

[@debbiemarchbanks8538]

You r awesome!!

[@EmmasCottage]

Thank you!

[@latashanicholson7607]

🤗🤗If I could kiss you through the phone!! LoL I have the ET 15000 too, it does not like Easy Subli!! It took me a year to find you! Someone with the ET15000! Using Easy Subli. Thank you so much, you made my day and saved my business. I wasted about 15 Easy Subli last night changing settings, it still left pizza marks. You're the BEST! 🙌🏽🙌🏽🙌🏽

[@EmmasCottage]

Thanks for sharing, happy you found me!

[@bernielove49]

I wish I had seen your video first your so right you can’t run the easy subli thru your Epson you get weird lines and just a hot mess Thanks for your tips 🙌🏼 I will try it again. 😊

[@EmmasCottage]

Thanks for watching!

[@rmbrown198623]

Thank you so much for explaining that ...I found out the hard way and put it through my epson printer 😫 Let's just say ...I WISH I KNEW BEFORE I MADE THAT MISTAKE 🤦🏼‍♀️...I love your channel and always look forward to new content 😊 Thank you, Margaret Brown 🥰🌹

[@EmmasCottage]

Don’t worry Margaret, I made that same mistake the first time I tried as well! Thanks so much for watching, and commenting!

[@milady2218]

Hello Emma, I am new to this using htv for sublimation. I was able to print one sheet nut tried again and it is not printing. The sheet is not being feed, I have seen others use epson echtank. Please advice

[@MrEdsster]

I wasted about 10 sheets of easy subli for one reason or another. I was told i needed the transfer sheet and didn't understand the difference. Not did i mess up trying to use the transfer sheet as the easy subli. I finally got that straight and tried using the correct easy subli and it would not feed in the printer. Alas i found s video where someone taped a piece of copy paper to the shiny side on the easy subli and tried to feed it. It worked like a champ. I did 17 prints like that in easy subli with not a single mishap. So YES it is possible to print directly. Also doing it as the young lady does works awesome. We appreciate these videos and in no way am i saying there is only 1 way to do this.

[@sheilad249]

Thank you for this video! It's Very helpful. Could you tell me what kind of heat press you have please?

[@MrEdsster]

i did get it to print with epson et... I taped a plain piece of paper to the easysubli the easysubli down first then the plain paper taped on top.. it worked

[@EmmasCottage]

Excellent, so happy it worked for you!

[@MrEdsster]

But my epson DIED . Et4760 (garbage) now i have sawgrass and it's freaken awesome

[@rosellinerodriguez9506]

Thank you 👍🏼

[@EmmasCottage]

You’re welcome 😊

[@dolliebrown2565]

Hi I just used my easy sublimation paper in my Eason 2760 with my settings on permanent Matt and the picture came out beautiful

[@EmmasCottage]

I've had it work one time when I printed directly onto the EasySubli, the rest all had wheel marks from the printer and were smudged in many areas.

[@anthonykirkendhall4344]

Maybe it is because of the model of my Epson Printer, but I load ALL of my EasySubli into the cassette of my ET-16600 and they print flawlessly - no jams, no lines, just beautiful images. Maybe the fixed the issue in the later model or I just got lucky. I use Cosmo ink and then load the paper tray and I am in business. The huge tank is really nice as well. I also use a Cameo 4 plus for larger prints and the Cricut for the smaller prints. Enjoyed the video and thanks for Word trick not for the sublimation but just for documents! Thank you!

[@EmmasCottage]

I wonder if they did make an improvement to the 16600? Possibly if you're not having issues! I've tried two different times, once with my 15000 and the other time with my 2760 and post were a hot mess.

[@barbrohmer]

I use an ET 15000 and easy subli goes through the cassette no problem. Comes out great

[@olwethumaseti8666]

This is awesome! thank you for sharing. Quick question - the basic cut image on cricut was resized to allow cut from cricut. I do not understand how it fitted to the Word image which was bigger in size.

[@EmmasCottage]

When I uploaded it into word I resized it with the exact dimensions as the cut. I show how to do this in the tutorial.

[@judith7]

Thank you so much 💕 love it 😍

[@EmmasCottage]

Thanks Judith!

[@pdokoonline]

@EmmasCottage Can I use "regular" parchment paper (I don't have non waxed). Thanks

[@sharoncyber50]

Hi, I used regular parchment paper and the Easy Subli glued to it....

[@EmmasCottage]

You have to use the same kind that I used in the tutorial. I haven’t been able to get other brands to work.

[@grammyzee]

Emma, I just watched your video. You explained very well. However, I have a question. You removed the cover sheet of the easy subli after you cut it, you removed the backing and then pressed the sublimation onto the easy subli. I followed your directions, but I used butcher paper because I only have waxed parchment. Welllll, the butcher paper stuck and I cannot peel it off. What did I do wrong????

[@EmmasCottage]

Unfortunately you cannot use butcher paper. The only parchment paper I have found that works is the same as the one I used in this tutorial.

[@jennswisher77]

Thank you so much! I purchased 5 sheets of Easysubli and ruined 3 pieces trying to load into my Espon printer :( So glad I found your channel!

[@EmmasCottage]

Glad I could help!

[@tammyhamilton2151]

my question is i have a 3xl black hoodie how big do i put the image

[@patcongine6604]

I have a question can you place say a very close box around the design for covering all the angles ?

[@EmmasCottage]

Sure thing! It would be the same as the offset tool.

[@aaronhensen4597]

I always print on the easysubli with my epson printer without any problems. For paper setting you need to set it on normal paper

[@EmmasCottage]

I’ve tried it twice, one time with the normal paper setting but it still didn’t turn out well.

[@aaronhensen4597]

@@EmmasCottage that is to bad, if you can print directly on it it will be faster. We love your channel. Greetings from the Netherlands.

[@EmmasCottage]

@@aaronhensen4597 agreed! Much faster!

[@dianachau7857]

When you sublimate the last step, 1. does it show on the teflon sheet? 2. Also, can you reuse the teflon sheet? I know i can't reuse the butcher. 3. Is there a reason why you use teflon over butcher? Thanks. Love your videos

[@EmmasCottage]

I never directly use my teflon sheet. My teflon is only used to protect my press as an extra precaution. I use Parchment paper usually, and yes, sometimes you can reuse it if the image didn't transfer off onto the sheet.

[@MrsAllum1]

Easy Subli jams in my epson

[@EmmasCottage]

Mine too that’s why I do it this way.

[@murshed12]

If I design any of colours then can the sublimation printer print the same different colours by only 4 ink that it use

[@EmmasCottage]

Yes, it works just like any other printer. Keep in mind it won’t print white.

[@tiadenesewynalda5893]

I purchased the parchment paper yesterday from your youtube channel, and got it today. I tried the mask yesterday it worked pretty good but it's hard to match up. Any ideas on how to make that easier. I just can't afford a sawgrass right now as much as I would want to. Keep making those videos girl...you're amazing!!!!! I have you on in the background all the time when doing orders.

[@EmmasCottage]

Wonderful! Honestly, it comes down to practice, practice, practice and becoming more comfortable with the products and confident in yourself! You can do it!

[@LanceMcGrew]

Does the HTVRont White Sublimation HTV work the same?

[@EmmasCottage]

I haven’t used theirs. So I’m not sure.

[@sbgtf4ever]

Maybe I missed it but which side of the subli do you cut on ? The shiny or textured? Thank you for the tutorial!!

[@EmmasCottage]

You cut the textured side. The shiny side is the carrier sheet and you don't want to cut that.

[@freeofusmartinez5199]

Hi what setting should I put my cricut machine to cut the easysubli? Also do you have a video on how to set up a 15000 Epson printer for ink? And the settings you put the printer to print the colors as accurate as possible?

[@EmmasCottage]

I cut mine on the same setting has HTV. I do have a video on my unboxing of the 15000, you can view it here. kzbin.info/www/bejne/jXq8n6ughpureJo

[@CindyGecht]

I just tried this method using an easy press 3 and it melted the easysubli to the parchment paper. Pressed for 60 sec at 385. Could it be too much pressure? Also I did not use my cricut mat, I pressed on top of a wood piece. Thank you

[@EmmasCottage]

I had this happen to me once when I had my easysubli adhesive side up and image side down, that was an error on my part and the only thing different than I’d done before. Not sure if that was the reason but it could be.

[@CindyGecht]

@@EmmasCottage well I will give it another try and see …. I don’t think I did but we shall see… 😊 Thank you!

[@fatimanavida417]

hi pls help. i don't know why it totally sticked to my parchment paper, i cannot able to peel off the easysubli htv.

[@EmmasCottage]

I’m guessing that you either used the wrong brand of Parchment paper or put the EasySubli on backwards. Sorry I can’t be more helpful, it works for me.

[@shellykennedy7872]

My sublimation paper stuck to the easy subli and removed some of the colors. Do you know why this happened? My press was at 380 for 60 seconds.

[@EmmasCottage]

No, I’m sorry. This has never happened to me when I’ve used EasySubli

[@nicholemiller9473]

Do you think you could sublimate the image and then cut it in design space? I have a few designs that just have words that I want to try this method on before I use HTV.

[@EmmasCottage]

You need the register marks to be able to cut within design space. So this would only work if you printed them as well.

[@nicholemiller9473]

@@EmmasCottage That's what I thought. Thanks for the reply

[@donnierearden8334]

Can you print directly on the Easy Subi using an EPSON F170 Sublimation printer ?

[@EmmasCottage]

I’m not sure, I don’t have that printer. I’m sure you could try it.

[@ruthybarretta7955]

So can you use spray glue instead of tape maybe

[@EmmasCottage]

With EasySubli I would say no. You don't want to mess with the adhesive it already has.

[@montanacaudill51]

When you press the transfer to the easy subli, how much pressure do you use?

[@EmmasCottage]

I use medium pressure.

[@DeadPandaBears]

Would it be easier to press all of it at the same time onto the shirt? Like put the shirt on the press, then the easy subli and the sublimation print on top. Then you wouldn't have to peel the easy subli off the parchment paper.

[@EmmasCottage]

Unfortunately, no. You don’t want to press the adhesive from the EasySubli onto the shirt for more than 15 seconds or it can ruin the adhesive. When you pressing sublimation you need to press for about 60 seconds. When your using the parchment paper it doesn’t activate the adhesive from the EasySubli. I hope that makes sense.

[@user-by6wj1yy5f]

Which side do I put my print onto the rough side of the whinny side

[@EmmasCottage]

The rough side. The shiny side goes on the fabric, it’s the adhesive.

[@lanitajones3185]

How did you get your cutter to cut the easysubli when there were no guide lines lines for it to read before it starts the cut?. My Maker 3 won't cut it because it cannot read the lines (that are not there).

[@EmmasCottage]

You are referring to the print and cut feature. I cut my EasySubli as a basic cut whenever my image is larger than the Cricut constraints.

[@zurinecorcorran6800]

Thank you for your video. When you cut your easysubli shiny side down matte up and then weed the excess. You are left with your cut file on the transfer paper. Is the transfer carrier paper supposed to cut with the easysubli or am i just going peel if off the carrier sheet. It doesn't seem to have the same floppy look like when you peeled yours.

[@EmmasCottage]

You do not want to cut the carrier sheet. I always peel mine off the carrier sheet.

[@044sue]

Thank you so much for the tutorial you made this look so easy I am going to try this I just want to ask one question can you use butcher paper to sandwich the easy sublimate and the sublimate paper together or can you only use the parchment paper but thank you again I absolutely love this video

[@EmmasCottage]

Thanks so much for watching. No you cannot use butcher paper, only parchment paper otherwise it will stick.

[@TheJanbates]

EMMA, What Gildan shirt do you like the best. I heard you list them but now can't find that video...was is G420 and or G460. thanks

[@EmmasCottage]

For bleaching, I prefer the Gilden 64000 in Heather colors.

[@TheJanbates]

@@EmmasCottage sorry i wasn't clear - i meant for vinyl and subli. you are blessing.

[@EmmasCottage]

@@TheJanbates for EasySubli I don’t have a preference, you could even use 100% cotton.

[@shaymccormack7565]

Thank you so much for your video, most was easy to follow and I'm sure after several more watches I'll have it down. I do have one question that may have been asked all ready, if i have an actual Epson Sublimation printer will it work with the EasySubli or do I still need to use this process?

[@EmmasCottage]

If you have a sawgrass I hear it works well. I’m not sure on an Epson.

[@kawestley1965]

Fist of all my Epson works great just pring on the sublimation htv if you have lines on your Epson you need to clean the tips prug clean just flow the direction on the Epson screen just use regular copy payer for testing if there lines. Save you Salvamation paper I've done many things just printing on to it and it's amazing how much brighter it is April without any film on it just paid attention which one you're using on which side you're have down on your sublimation I buy and so if you cut the sublimation iron that on to your shirt first just a couple seconds it worked easier that way then you just lay you sublimation sheet with your design right on it.ive had great luck . But it you do it that way make sure you cut it. First

[@EmmasCottage]

Thanks for your comment, I'm happy that it has worked for you.

[@guylainelessardgoulet5044]

Wow great video...exactly what I was looking for....how does the desgins stays on the shirtsafter several washes?

[@EmmasCottage]

Good question! Mine have all held up well. I wash them inside out in cold water, dry on low heat.

[@tatianefartura9696]

Thank you! Your videos are amazing! I want to start doing this, but need to buy a printer first. Any suggestion?

[@EmmasCottage]

My first printer was the Epson 2760 and I put Cosmos ink into it. It was a great starter printer.

[@twisted_sista_bmccleanmiss6048]

Hi Do you know if regular htv could be put on top of a bodged easy subli job to cover it plse?

[@EmmasCottage]

I have never tried that, but my instinct says no.

[@samantharodriguez8778]

Hi, I love your videos thank you for being so informative! Quick question, what material do you set your cricut to cut the easysubli?

[@EmmasCottage]

Thanks for watching Samantha! I use the iron on setting with Cricut at the default cut. But alway try a test but to be sure!

[@lindaday7853]

Thank you so much for this video. Our problem is that every time we have tried this it keeps sticking to the parchment paper and won't come off. We have tried this 3 times and cannot get it to work. We have used parchment paper and not butcher paper. Can you please help? Thank you so much.

[@kathywinn6869]

I have the exact same problem. I am so frustrated!

[@EmmasCottage]

The only parchment paper I have tried is the one I used in this video, the link to it is in the description. I have never had a problem with it sticking.

[@chelle7_myblueeyeddog]

Really good thorough instructions. Why does your sign say, "Dandelion Cottage" and not "Emma's Cottage?"

[@cari1906]

Love your video! What would be the difference between this process and printable HTV with a regular printer & print then cut?

[@EmmasCottage]

I always want my images larger than Cricut's print and cut allows, that is why I print my images from word. I prefer EasySubli over printable HTV only because I think the HTV feels thicker on the shirt and EasySubli feels thinner.

[@cari1906]

@@EmmasCottage but as far as longevity of the ink on printable HTV & Easysubli would you say it’s about the same?

[@EmmasCottage]

@@cari1906 I’ve only done a few HTV’s and gave them away, so I can’t give an opinion on longevity.

[@soulflower9763]

Hi love your channel I watch a lot of your videos! When cutting the easy subli what material do you put it under on the cricut machine?

[@EmmasCottage]

I believe I use the same settings as HTV.

[@rhondathomas6773]

HELLO, I LOVED YOUR TUTORIAL. WHAT ELSE CAN YOU BUY IF YOU DON'T HAVE THE FUNDS FOR SISER SUBLI?

[@EmmasCottage]

There are other materials but they are close to the same price.

[@kellyerler9026]

Hello, Using Signature Select Parchment and the paper stuck to the easysubli. is there a safe way to remove it with out ruining it?

[@EmmasCottage]

I cannot answer to parchment papers that I have not used. My guess would be to wait until it’s cool, then try and peel it off? The link to the parchment paper I used is in the description.

[@colleensmith4285]

Great video Is the insert screenshot facility available in any Microsoft word version Thanks

[@EmmasCottage]

I am not sure what versions it is available on. I know that you have to update your software, it was available in one of the more recent updates.

[@1776republic]

Wonderful Video!!! I think Ive bought about everything on the list, but wanted to ask what do you use on the top of your heat press with the magnets? :) Thank you!

[@EmmasCottage]

I use a Teflon sheet and use magnets to make it stick to the heat press.

[@debbiemarchbanks8538]

I’m new to sub but didn’t you peel the easy Subli off it’s carrier sheet?

[@EmmasCottage]

Yes, I did. This is a hack, an alternative way to sublimate on EasySubli. My epson messes up the print every time I've tried to print it directly. You have to take it off the carrier sheet so that you can sublimate on it.

[@jilliej7]

I print on easy subli with my Epson inkjet?

[@EmmasCottage]

Sometimes it works, on my 15000 and 2760 I get wheel lines and smudges. It is best used with Printers that are specifically made for Sublimation, not converted.

[@newcheveu]

I used another parchment paper with the easy subli and it was glued to the parchment paper after I sublimated it. Will this parchment paper Not stick to the easy subli and prevent from doing it?

[@EmmasCottage]

Did you use the same parchment paper I used? I’ve never had it stick to the parchment paper so I’m not sure what happened? I’ve heard other had this problem and they either used the incorrect kind of parchment (kind with a wax coating) or their heat and pressure were too high.

[@MommyLea76]

Hello! Did you print (with your Epson) on regular copy paper?

[@EmmasCottage]

I don't use regular copy paper. I use sublimation paper. My favorite brand is StarCraft!

[@TheJanbates]

Emma, great video. Why did you use parchment paper instead of butcher? Doesn't parchment keep moisture in? still learning in NC.

[@EmmasCottage]

You have to use parchment paper for this process, EasySubli will stick to butcher paper.

[@TheJanbates]

@@EmmasCottage Thank you so much for the info...makes sense now. you helped me bunches. love your video's keep 'em coming.

[@popterrific]

Hello I love your video, I'm wondering what what's the cutting setting for easy subli?

[@EmmasCottage]

I use the same cutting settings as HTV

[@tammifranke1855]

I love your videos! Thank you for all the info you provide! I just have a quick question. What setting do u cut the easy subli on?

[@EmmasCottage]

Thank you so much for watching! I had it on the iron on setting. Same I use for my HTV.

[@sandymock9823]

Love this. I love working with Microsoft Word. I did notice that when I brought the image up in Word that the center of my image has a + sign in it. Do you know how to remove the image?

[@EmmasCottage]

The reason you see the + sign is because you had the image selected within Cricut Design Space. You need to unselect the image by clicking anywhere else on the screen then you can do the screen shot.

[@sandymock9823]

@@EmmasCottage Thanks Emma, working on it right now.

[@reneewright4667]

How did you get the Cricut to cut the easy subli without sensor marks?

[@EmmasCottage]

I did not use the Print and Cut option. In this tutorial, I explain my work around for cutting larger images. I cut the Easysubli as a basic cut, and I print with Microsoft Word.

[@amylabrash5737]

I use offset feature to cut easy subli

[@EmmasCottage]

Great suggestion, I believe at the time of making this video Design Space didn’t have that option yet, or it was newer and I didn’t know how to use it back then.

[@debrarobinson3296]

Just watched this great video, are your heat setting Celsius or Fahrenheit please

[@EmmasCottage]

I use Fahrenheit

[@pamelaward596]

what kind of parchment paper are you using.. I've tried this and it sticks to the parchment

[@EmmasCottage]

It has to be non-waxed. The link to the kind I used is listed in the description of the video.

[@jacpace7611]

Do you put the easysubli onto the mat shinny side down or up?

[@EmmasCottage]

Shiny side down, the dull/textured side is the EasySubli that you need to cut with the blade. The shiny side is the carrier sheet that sticks to the mat.

[@zeronz87]

hi, how does that material feel on the clothe? I mean does it feel rough and heavy or soft and thin?

[@EmmasCottage]

Fast forward the video to 38:38. I would say that it feels soft and thin. The Glitter vinyl is rough and heavy.

[@STARQH]

What pressure should I press for? Medium heavy?

[@EmmasCottage]

Yes, I press medium to heavy.

[@DoodyBugg]

Thank you so much for this!! Is there a way to add a bleed to the image?

[@EmmasCottage]

From Cricut Design Space yes, from Microsoft Word not that I know of.

[@DoodyBugg]

@@EmmasCottage I figured it out!! I subtracted 1/8" from width & height of cut image 🥳

[@destineeagnew1768]

How are u cutting it without the image being sensored on the mat ?

[@EmmasCottage]

Did you watch the full tutorial? I didn't do the typical print then cut, because my image was larger than Cricut's print than cut allows.. I printed from word and cut from Cricut, so the image wouldn't need to be censored on the mat.

[@sharoncyber50]

Could you use butcher paper instead of parchment paper?

[@EmmasCottage]

No, it will stick to the butcher paper.

[@stephaniecooksley9901]

I dont thinnk i have any good parch paper could you use teflon sheet like you do with glitter or glow in dark?

[@EmmasCottage]

I have not tried it with Teflon but I have heard of others trying it and said that it works!

[@stephaniecooksley9901]

@@EmmasCottage awsome thank you. im about to try so i will keep you updated

[@stephaniecooksley9901]

teflon sheets do work as well :)

[@EmmasCottage]

@@stephaniecooksley9901 I haven’t tried but I’ve heard the same thing! Thanks for sharing.

[@idahospudnut]

If I have the Epson F170 Sublimation printer will the subli work to print directly on the subli?

[@EmmasCottage]

I’m not 100% sure because I don’t have that printer, will you try it and let us know? I would assume that it will work because it’s a specialized Sublimation printer. Those printer heads are different than the other Epson printers that we convert to Sublimation. I would assume that your printer heads can handle the EasySubli material.

[@michbennett]

Lorie I have the same Epson F170 so please reply here if you have tried printing directly on the Subli and then pressing on garment. Thanks in advance for sharing your experience.

[@tresabaker7703]

Quick question can you use butcher paper for this instead of the parchment paper for this project?

[@EmmasCottage]

No you cannot use butcher paper, EasySubli will stick to it. I have heard that you can use Teflon sheets.

[@jessicasweeney1719]

@@EmmasCottage learned this the hard way.

[@kateschoellhorn8096]

Thank you for doing this video - it's exactly what I needed! I'm getting ready to do a lot of transfers using this & I have the ET15000. One question - do you have to do press it on the shirt right away? I don't have the shirts & sweatshirts yet so if I can get the transfers ready prior to them arriving that will save me a lot of time!

[@EmmasCottage]

I’ve never tried waiting so I am not sure. I feel like it would probably be okay, but not sure.

[@kateschoellhorn8096]

@@EmmasCottage thanks for responding! I will test it out & let you know!

[@dadzanddaughterz9774]

Why would you skip the cut setting for the sun paper?

[@EmmasCottage]

I’m sorry, I’m not sure what your asking? Sun paper?

[@lnbfinancialservices8375]

Hi what papers do you use exactly? Can you post a link or the actual names? Please

[@EmmasCottage]

What papers are you referring to? Everything I used in this tutorial is listed in the description of the video. I hope that helps!