Sublimation on Siser Easy Subli Vinyl Using An Epson 7720

#diy #sublimation #easysubli
Hey everybody,
Sometimes printing on regular transfer paper doesn't give us the POP of color we need for our projects. Not like sublimation does. So for today's video, I will be showing you how to sublimate on Siser Easy Subli Vinyl using an Epson 7720 to get that POP of color like we like it.
📢🖲 *This description box may contain discount codes and affiliate links that are at no additional cost to you, I may earn a small financial benefit. This helps support my channel so I can continue to provide you with inspired and focused content. Thank you.*
All the items I suggest, I have used and know how they work. Some are cost-effective and some are not. Please check out each link provided and see if you would like to use them. Thank you :).
📢Items you will need to complete this project include:
-Siser Easy Subli (11x16.5): amzn.to/2GKTKLU
Smaller sheets (8.4x11): amzn.to/3li5aFT
You can purchase sheets and rolls of EasySubli from: www.brilliantv... for a higher price
-Heat Press: amzn.to/35dV0kh
-Image where you prefer to get images from
-Butcher paper: amzn.to/35gcSeq
-Lint Roller(s): amzn.to/3eSo2t0
💻📲Get Social with Crafting Made Easy: Facebook group: / craftingmadeeasy1
👕🛍Shop With Me: www.upatmidnightcustomdesignsllc.com
📧Email Me: [e-mail]
💻 If you are interested in reviews or other content, check out my other KZbin channel: / lif3withlolo
Thank you for subscribing to my channel and your support!😊🥰💙

[@GraceChaser3]

Thank U!!! You were the first to describe all the small details, especially when it came to the htv and then the mask. Thank you!!

[@ritablue4948]

My favorite part " a transfer sheet and sublimation had a baby" . Best description ever

[@CraftingMadeEasy]

lol

[@cabztv5657]

What program are you using to print your sublimation.

[@naudiaboyum888]

Yours is the first video I've found after searching (forever it seems like), that actually helped me. Thank you

[@michellemorgan5192]

I just found you and you explain every detail and I love it

[@nikkilopes7548]

Thank you so much for the video!! I tried to watch others but they were harder to follow along; and yours was easy to follow along and you did so well explaining! Will be trying out easy subli soon so hopefully my first time will be as successful as yours. 😊

[@heatherkarow8399]

You are the best! Very detailed! Thanks so much! This has been a struggle for me for some reason

[@karenssinfulcreations7915]

thank you so much, for such a complete step by step video.

[@caymenbrown2465]

Thank you soooo much for this video it definitely helped me do a successful practice run before putting them on my shirts

[@jacoblaw2228]

Thank you, so informative! Got some of this yesterday and testing soon, thank you from the UK!

[@justiningram2613]

See this is what i been looking for. A print without a vinly cutter. I have an image thats about 13x19 i grabbed a 30 foot roll so i just cut the sizes i need

[@normazaharioudakis115]

There’s 10 sheets and two different sides so which one is the correct one to use please, the pack says 5 sheets

[@shanicepage3744]

Loved the video, I have looked at like 20 different videos an this one is like finding the golden egg. Just two questions: do you need to use the mask to cover the picture before pressing? an was the mask the clear plastic paper you peeled from the back of the picture or is it a separate mask sheet I need to buy?

[@CraftingMadeEasy]

The mask was the clear. Its like a transfer tape, but its not that sticky. I used it with this one, but with another one I didn't use it.

[@lydiataylor7259]

Hi!! This turned out great. Did you have any problem with the easysubli getting stuck in your printer?

[@CraftingMadeEasy]

No. The trick I found is just putting in one sheet of the easy subli or large sublimation paper in at a time.

[@quita2rite]

I’m having this problem

[@jkrooger856]

I’m having this issue

[@sistersofsuccess6277]

Who had a "baby"? LoL good one

[@jayrome8764]

Those colors are popping!

[@nihil7002]

May I have a link to the mask?

[@CraftingMadeEasy]

I believe it came with the easy subli.

[@AIRJ0RDANx23x]

Does this last longer on clothing than heat transfer paper from an inkjet printer?

[@CraftingMadeEasy]

I haven't noticed a difference

[@Ayyyeeetina]

Does the masking sheets come with the vinyls or do I have to purchase that separately ?

[@CraftingMadeEasy]

I want to say I purchased it all together. However, some places sell it separately

[@mandystewart2590]

This was a great, very informative, video. Thank You!!

[@talkingthattalk925]

Hi, do we have to put the mask on the image to press? Or did you do it as a precaution?

[@CraftingMadeEasy]

No, I have used it with and without the mask and it came out fine.

[@ssergeant9682]

the image I plan to use is a logo. it would be easier if it were a square like your image - but it's not - so I need to print it out on letter size. I have a 7720 converted to sublimation, but since I only have a cricut machine and not a silhouette - I'll have to stick with the size that can add the registration marks? or do you have another suggestion? if I were to do this in 2 steps and make a 'platform' of easy subli (much like if I were using siser white glitter which I also have never tried) and then use sublimation paper and cut that on my cricut - would that be an easier way to do this? are those temperatures higher than this? my concern in that I've heard so many say that the image comes out smeared from the printer. Should I print it (bleed off?) and then just let it dry before cutting it on my cricut? air dry for minimum 2 hours to help with the cut? not sure what setting to put it on to cut? one more question (sorry for all the questions) but I recently bought a TUSY heat press 15 x 15 from Amazon but have not used it. what pressure do I set it on and how do I do that? for either process (2 step or 1 step). thank you for the very detailed video. I think once I get answers to these questions or concerns I should be good to go. ( I hit 'like' and also subscribed)

[@CraftingMadeEasy]

If your image is really detailed you may be better buying transfers from a company. If its not and just a square, you can cut it out with scissors. Now I have seen videos where people cut the easy subli to the size of there image with their cutting machine, and then lay sublimation paper on top of it. So cut the blank easy subli, then on regular sub paper your image, line it up with the blank easy subli. I just place my image after I print it, on the heat press with the top open for about 20 minutes. I haven't had any issues with smearing. And I always take my bleed off. You twist the knob on the top. It will be medium pressure.

[@tinman6182]

Got my ECOTANK 15000 about to set it up soon.

[@monicabookdevour5488]

Very thorough explanation

[@tinman6182]

I can tell you love it. YEAH. I can tell you like it. YEAH. 😅😅😅😅😅😅😅

[@moklok282]

Great Video! Thank you !!

[@sewsowdesignstudiowfelicia3097]

Nice video! You had me cracking up... when you said “episode”... I was like “speak it into existence, sis!”..

[@CraftingMadeEasy]

:) Thank you.

[@EJ3.16]

Excellent excellent 👍🏻👍🏻thank you very nice tutorial....!!!!

[@LillysAwakening]

Love it!! How did you get the images to be so big? Thank you

[@CraftingMadeEasy]

I used Microsoft word to make it big and just sent it to my printer.

[@sierracaudill8350]

Would i be able to cut out a shape and then press the sublimation design after the vinyl is on a shirt ?

[@dianagaona908]

Does it feel like it would crack like Iinkjet printable HTV does?

[@CraftingMadeEasy]

No it doesn't.

[@markjones3030]

Thanks!

[@janayagarcia7217]

How do I keep the printer from jamming 😭😭 I have a 7720 and can't get it to work. I'm doing it one sheet at a time

[@CraftingMadeEasy]

Are you using the bottom tray?

[@LadyDimePiece4Eva]

@@CraftingMadeEasy is there a certain tray u use for certain things. I need more videos. U are the Goat...

[@CraftingMadeEasy]

@@LadyDimePiece4Eva For my bigger prints I use the bottom tray. It can handle larger prints

[@daniellehamill]

I have the 7720 also. I believe its the shine the wheel can't grab..I was having same problem.I put 2 strips of masking tape down middle of paper it grabbed and had no problem since.hope this helps

[@kevinbyron7683]

@@daniellehamill Thank you for your comment!!! After a couple days not getting this to feed properly, your comment made us successful!!!!

[@The11thPower]

Thanks for this video. So I should be able to print directly on 1 of theses sheets with my epson 7710 and then cut it with my cutter using the print registration mark system. Haven’t tried it yet but this walkthrough is on point!

[@CraftingMadeEasy]

Yes, as long as your printer can fit the sheet. Now the size of your image depends on if your cutting machine can cut it, if you have a silhouette you should be ok with large images. A circuit, not so much.

[@The11thPower]

@@CraftingMadeEasy thank you. it should fit perfectly then, i'll try the matte paper settings. were you ever able to cut with registration marks on 1 of these sheets? I've never gotten registration to work but i've only tried with normal sub paper/sublimation ink.

[@CraftingMadeEasy]

@@The11thPower I haven't used any registration marks. All the prints I have done are larger than what my Cricut cuts. I just had to cut an image out by hand. You may not need the registration marks unless you are matching it up with another image.

[@foxxyme98]

I have the 7720. Which side of vinyl should I be printing on?

[@ashspikachu3370]

I have the same printer and my image was smeared coming out of the printer. Not sure what went wrong :( do you mind sharing what sublimation ink you use?

[@CraftingMadeEasy]

I think I purchased it from either eBay or amazon, I'll check and let you know

[@mariannadodd9123]

Will the easy subli work with any sublimation printer? I have an epson with Hippo sublimation ink and also will this work any type of shirt? ❤️ btw thank you for helping so much!!!

[@CraftingMadeEasy]

Yes it can, I have an epson.

[@Empyrealtees_more]

My ink didn't dry sitting under the heat press for 60 seconds. Could that be because it was on 325?

[@CraftingMadeEasy]

Yeah, I had mine set to 400 degrees to dry.

[@Empyrealtees_more]

@@CraftingMadeEasy thank you. I didn’t see that part. Google took me right at almost 13 minutes into the video.

[@thecraftguy21]

How does it hold on washes ?

[@freshMila]

Hello again I just got my sheets. Can I used the sister easysubli on any color tee shirt ? Thank you

[@CraftingMadeEasy]

Hello. Yes you can use them on any color shirt

[@freshMila]

@@CraftingMadeEasy thank you for your reply🙏

[@CraftingMadeEasy]

@@freshMila you're welcome... 😊

[@marypearson3635]

Very easy video to follow.

[@MiguelGonzalez-vh1ny]

Ummmmmm. Let’s go Brandon?

[@Kewlstickers]

Terrible President & Vice President 👎🏿🦨

[@MadeByTriniLena]

Your awesome, I'm subbing to learn ♥️🙏🏽

[@teresadean1996]

Can you cut the subli vinyl to fit in a Epson et 4700 and will it work in it

[@CraftingMadeEasy]

You should be able to cut it down to size

[@lstewart1171]

wonderful work thank you for video thumbs up and subscribed today 👍 😀

[@DanielRodriguez-bn1fg]

Do you get ink streaks or marks when printing on easysubli with your epson ??

[@CraftingMadeEasy]

I haven't had any streaks. But sometimes I get random marks on the blank spaces. I usually cut the empty parts off, when I am subbing on shirts to avoid any random spots on my shirts.

[@DanielRodriguez-bn1fg]

Do you clean your nozzle heads before you print each time ?

[@1957bc]

What program do you use to size the image?

[@CraftingMadeEasy]

Microsoft word

[@stephaniehighland269]

Thank you so much for this video! I am so nervous because I have customer wanting me to do this

[@CraftingMadeEasy]

You will do fine. Just take your time

[@therealvizualassassin]

Thumbs down for the design!

[@Kewlstickers]

Gas ⛽️ prices $5.35 gal, thanks #46, where’s Hunter’s laptop 💻

[@mizz_birdie5026]

Thank you

[@sosocrafty7377]

what software is that your using for images plz?

[@CraftingMadeEasy]

I just used Microsoft word

[@lovely31bluprint]

HOW DID YOU GET THE WHITE TEXTS TO SUBLIMATE ON THE SHIRT?

[@CraftingMadeEasy]

It is apart of the picture. It sublimated on the Easy Subli.

[@lovely31bluprint]

@@CraftingMadeEasy OK. Thank you for your response.

[@moniquebritton2019]

You did great.. I love using easy subli, Where did you purchase the image?

[@CraftingMadeEasy]

Thank you. Someone sent it to me to put on the sweatshirt.

[@hollyhanson4706]

What’s the washing instructions like? Does it peel at all?

[@CraftingMadeEasy]

Wash inside out. I haven't noticed any peeling.

[@KimSanford]

Where did you get the Mask from

[@CraftingMadeEasy]

It came with the subli sheets. Try looking on 143 vinyl or brilliant vinyl for some.

[@jasonrick6572]

How did it do after washing

[@CraftingMadeEasy]

I gave it away so I do not know. I have something with a piece on it, I will wash and let you know.

[@leoanthonybasa6558]

@@CraftingMadeEasy any news after washing?

[@CraftingMadeEasy]

@@leoanthonybasa6558 It held up. you have to wash it inside out.

[@LadyDimePiece4Eva]

What ink u use in your sub printer

[@inspiringminds6822]

Great video and likable personality lol.👏🏽

[@MythicalMiniFarm]

Awesome video. What type ink do you use and do you clean your nozzle head every time you print?

[@CraftingMadeEasy]

Thank you. I purchased some ink from ebay or amazon, it didn't have a name. I will see if I can find the link. I recently purchased cosmo ink. I only clean if I haven't used it in awhile.

[@briannahernandez4740]

What app are you using

[@CraftingMadeEasy]

I use Cricut Design Space, but for this I used Microsoft word

[@owanajtk1lockhart190]

Thank u so much. I wasted ink printing on the wrong side. (Smh) Before watching video

[@cwalton2973]

I started out buying 5 easy subli sheets. Messed up 3 of them before I discovered I was printing on the wrong side of the paper.

[@CraftingMadeEasy]

OH NO :(.

[@normazaharioudakis115]

I just messed up one and then barely touched it and smeared on the print it looks easy but not really

[@alishajohnson1835]

Awesome video, tfs. Where did you get the mask sheets from. Thanks

[@CraftingMadeEasy]

They came with the sheets. Let me see where I originally got them from.

[@amberochoa7120]

How do you insert the subli in the printer

[@LadyDimePiece4Eva]

Shinny side up or down? I have the same question and printer.

[@christyburns7131]

Do you have to use the mask every time or can you just use butcher paper? Ps, this video was very helpful!

[@CraftingMadeEasy]

I used the mask once and once without and didn't have any issues. Just make sure you put something on top of it, so it does not bleed onto your heat press.

[@JMSCollegeFun]

how does it wash?

[@CraftingMadeEasy]

It washes well. Turn the fabric inside out.

[@ssergeant9682]

I just did the print on easy subli. I printed out the design on easy subli - then placed one over the other. I tried it at the lower temp and the colors didnt come thru, so now I"m trying to redo my color profiles in my Epson 7720 and so far not having any luck. it won't save them. The color of the green was way off (IMHO) so attempting to redo. waiting on a response. so far nothing. the green way more of a teal, than a dark green. I guess I'm tempted to just waste a sheet of easy subli and print directly? but afraid the colors still won't be right. I printed a color sheet using my Epson parameters and if I could come up with THAT green I'd be fine. but it's more of a teal. thanks for getting back to me. It's for my grandson's place of work, so I really want it to at least have the right colors. LOO

[@CraftingMadeEasy]

Don't waste the subli, use regular printer paper to test your colors. If you want to see how they come out, sub it on a microfiber cloth. You can buy them from the dollar tree.

[@freshMila]

Hello Definitely I can use Epson printer with sublimation ink correct. Looking forward to hear from you. Thank you

[@CraftingMadeEasy]

Correct.

[@freshMila]

Thank you for your reply I really appreciate. You the best

[@colton18771]

This t-shirt design is not aging well

[@VeteranHwyFuzz1]

Lost me at the sample image!