Emotiva XMC 2 Review Could This BE Any Better?

Emotiva XMC 2 Review Could This BE Any Better? Grab one here Emotiva RMC-1 bit.ly/Emotiva_RMC-1 or the XMC-2 here bit.ly/emotiva_XMC-2 The Emotiva XMC-2 is a great alternative to the more expensive RMC-1. It sounds crystal clear right out of the box and i notice a bit of difference between this and the denons/ marantz AVRs **Connect with me on Facebook & Instagram** bit.ly/Facebook-THTD & bit.ly/Instagram-THTD I created this page to give exclusive content I don’t put on KZbin and to help you buy speakers and electronics.
Like my setup? You can buy this 17-channel home theater and more! I am an Official SVS, Emotiva & Amazon affiliate. Affiliates get a small commission of the purchases you make, and it doesn’t cost you a dime extra! Click the links below to purchase them and help support the channel. Don’t see what you like? Just ask!
***I’m not sponsored. I’m not a paid actor. Everything you see in these videos are my opinions and are not influenced by payment. If I like it, I let you all know. If I don’t like it, I will do the same.
Gear I use and approve of: bit.ly/BH_MyGearList and bit.ly/BH_RecordingGear
www.amazon.com/shop/thathomet...
Everything Emotiva XPA Gen 3 Amplifiers bit.ly/Emotiva-XPA-7 & bit.ly/Emotiva-XPA-3
BasX Amplifiers bit.ly/Emotiva-BasX-A-700
*Everything SVS*
SVS Prime Pinnacle bit.ly/Prime-Pinnacle
SVS Ultra Towers bit.ly/ULTRA-Towers
SVS Ultra Center bit.ly/ULTRA-Center
SVS Ultra Bookshelves bit.ly/ULTRA-Bookshelf
SVS Ultra Surrounds bit.ly/ULTRA-Surrounds
SVS Prime Elevation (ATMOS, Dts-X, Auro-3d) bit.ly/Prime-Elevation
SVS Prime WIRELESS bit.ly/Prime-Wireless
SVS Soundbase 150w X2 wireless amplifier bit.ly/SoundBase-Amplifier
||| SVS Subwoofers|||
PB16-Ultra bit.ly/pb16-ULTRA
SB16-Ultra bit.ly/sb16-ULTRA
PB-4000 bit.ly/pb-4000
SB-4000 bit.ly/sb-4000
PB-3000 bit.ly/svs-pb3000
SB-3000 bit.ly/svs-sb3000
SoundPath Isolation System. You will need a set of 4 for a SEALED subwoofer and a set of 6 for the PORTED model bit.ly/SoundPath-Isolation
Sanus Speaker stands. These are great and people ask about them all the time. They are heavy duty and have cork insulators bit.ly/Sanus-Speaker-Stands
High quality subwoofer cable bit.ly/SoundPath-Subwoofer-Cable
**Check out SonicChill1 here on KZbin** kzbin.info/door/zzB... or contact Gill direct here [e-mail]
*Everything Amazon*
Epson 5040ub 4k projector…. amzn.to/2KDhL7F
Ruipro Fiber HDMI…. amzn.to/2WR8JpW
Denon AV receiver… 6300h amzn.to/2L6u5K2 or 4400h amzn.to/2xuTgnE
Klipsch L+R speakers …. amzn.to/2JcND2l
Klipsch Center Channel …. Rp-450c amzn.to/2sjrSUI rc-64ii amzn.to/2xnPPz5
Klipsch Surrounds …. amzn.to/2xneW5f
Klipsch Dolby ATMOS speakers …. amzn.to/2somP4x
Outlaw audio bulletproof amplification …. amzn.to/2H1Qo14
4k blu ray player … amzn.to/2L56YQp
|||| Accessories ||||
Auralex mopad XL … amzn.to/2H0Ohea
Speaker wire.. 2 conductor amzn.to/2L5SGio
Banana plugs.. amzn.to/2kzzf6p
||| Recording Equipment ||||
Zoom H4N Pro… amzn.to/2MFjN5N
Rode VideoMic Pro Plus amzn.to/2FV7PEy
DJI Osmo Mobile 2 amzn.to/2TkHjYa
**Credits for music go to **
Joakim Karud / joakimkarud Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library • Video
Music by Chillhop: chillhop.com/listen
ChillHop Chill Study Beats 2 www.youtube.com/watch?v=gwDoR...
Listen on Spotify: bit.ly/ChillhopSpotify

[@tkcdac]

Thanks for doing a post review. After months and months of listening the burrs and sharp edges work through the skin and the gold will shine. Knowing this thing hits hard and true even after the purchase is the cure to buyers remorse. Thanks man!!

[@seldom_seen8713]

Very good and honest detailed review. Thanks for sharing Sir.

[@keepingupwiththejones2933]

Love Zach saying "It looks goood." Thanks for the review. Can't wait to see if you have a dedicated space in the new place.

[@performingspecs7841]

The sound is even more impressive after running Dirac Live. The RMC1L or any of the any other two will definitely win more buyers over after hearing this machine after calibration.

[@montrealmccomack1759]

Hi, I have a 5.1.4 AURO3D/Atmos/DTX setup and am looking to upgrade sound quality for my hometheatre from Marantz 8002. Since you have tested both if you disregard price and you were in my shoes, would you buy the XMC-2 or RMC-1 and why? Thanks in advance.

[@icritudie1]

Hey Home theater Dude. Ive had the XMC-2 here for almost a month and had Dirac fully calibrated. Were you able to experience that as well or were you using just the straight "User" EQ Profile?

[@chrism9976]

Are you able to run 2 different displays? I purchased an IOTAVX AVX-17, but discovered that my TV on the ARC channel needs to be turned on in order to see video on the projector...so no dedicated video switching. It too is a buggy unit.

[@sebna]

How is the Atmos and height channels in general performance on XMC-2. I read it is not as good as on Denon / Marantz. What amps are you using in your system? And what speaker config 5.x.4?

[@michaelwshires]

Dude, I really wish Emotiva would add Auro 3D. I’m looking at the Denon X6700H which will be 13 channels and Auro 3D AND has pre-amp mode for a few hundred $ less than the XMC2. It would be nice if you could compare the XMC2 to the Monoprice HTP1 even though the Monoprice is more expensive. I’m curious in the difference in sound quality. Also, since i really value your opinion could you please review the Iotavx AVXP1 7 channel amp? No one I can find has reviewed it. Thanks for your great channel.

[@nekerrivera]

I would love to pull the trigger and buy this processor but it looks so complicated to set it up. I wonder if it come with a set manual.

[@adamjj85]

Great update! Has the experience improved on the newest firmware releases? I saw in the release notes that they've done a lot of re-writing of the code. Also, how is the menu performance on the latest firmware? I really want to like this at $3k but the Monolith HTP-1 seems to have the edge on stability, features, and speed to release Dirac.

[@ThatHomeTheaterDude]

all the headache is gone. the software just works now. before it was sluggish and glitchy. now its as smooth.

[@battousai412]

Looking forward to review of rmc1 with Dirac. Any info on auro3d or dtsx pro or imax enhanced? Glad your back, hopefully Zack can keep you a little busy 😘

[@ThatHomeTheaterDude]

yeah. i been distracted

[@BrianGarside]

Does the XMC-2 have a low noise floor like the Parasound amps have for when its in a stereo/direct mode when listening to music?

[@ThatHomeTheaterDude]

they match well.

[@anthonyambrose6695]

Which is the best all around unit marantz av8805 or emotiva rmc 1

[@ybaiani]

Hi @TheHomeTheaterDude, I have a choice of getting this or the Marantz AV7706 for roughly the same cost. Any thoughts between what I should go with? Have their been anymore recent software / firmware updates since you posted this video?

[@THEHULK209]

I’m curious what did you end up going with? I had the same exact question I was going to ask him but I seen that he never answered ur question.

[@ybaiani]

@@THEHULK209 I ended up getting the Emotivs XMC2. It’s been a great unit.

[@HenriqueFoletto]

Thank you for the video! I see that you are using 2 subs, could you do a 9.2.6 setup with this processor? Thanks!

[@azcheron]

Technically yes. You would have to run a Y off sub1 to have the 2 subs because there are only 16 XLR connections including the subs. 9.1.6 is max without Y adapter.

[@Samzep]

Do they make avr receivers with 11 channel amp like the antham

[@hi-fihaven2257]

Hi Chris! Man I love that rear panel shot. Love all of those inputs, love flexibility. Very convenient layout. Scary but I could fill those HDMI connections right up! Correct me if I am wrong, but this thing looks like it is built like a tank. I have an Emotiva Audio speaker system. T1+ for mains, C1+ center, E2+ surrounds, B1+ for Atmos. 5.1.2 I have got a great seven channel amplifier, but would really like to upgrade my processor. This unit may be the candidate for me. I would be like you, in that I would be using it for both movies, and music. I absolutely love my Emotiva speakers, great bang for the buck! Build quality, and performance off of the charts! Have a great one man!

[@ThatHomeTheaterDude]

yeah. its much better now with the new firmware. You will enjoy it for sure

[@whatarushlod]

Does this unit have Bluetooth?? I can’t find that anywhere in the spec sheets…?

[@straight6supra915]

Since you have had both the XMC-2 and RMC-1 is there a difference in sound between the two? The only difference between them is just expansion modules?

[@BrianGarside]

Most say they can not hear a difference since they both have the same DAC. The RMC-1 is fully balanced on all 16 vs the LCR on XMC-2.

[@pierrecastanets1974]

It would have been nice to see you demonstrate some of quirks or click though the OSD.

[@ThatHomeTheaterDude]

yeah, but at the time of recording they had corrected them so it would be hard to show on camera. Since that update they have done 2 more firmware updates and this unit is damn near flawless now

[@kakorejrboyz6447]

Thanks for information but I need direct connection with u and also I need JBL SPEAKERS

[@paulwenzel8914]

Emotiva for the win. Loved the review

[@k9driver]

The processor only has the XLR output for the subwoofers. How do I connect it to a subwoofer that doesn’t have XLR outputs?

[@ThatHomeTheaterDude]

get an adapter, but then you lose the signal quality benefit but will work just like an rca connection

[@Marc-eh4ib]

Hey Dude, now you've reviewed the NAD T778 & this Emotiva now has Dirac, which one would you keep? NAD or Emotiva?

[@ThatHomeTheaterDude]

emo. nad didnt leave a lasting impression. im sure its awesome for 2 channel

[@chrisbaker2004]

Would appreciate it if you would actually tell us what the "annoyances" are. I appreciate your opinion and like that you love the sound and picture and that helps in my decision, but I also need to know what the downsides are, especially compared to the Monorprice unit. Thanks

[@ThatHomeTheaterDude]

good idea. I filmed it, but with the brand new update all the issues were fixed so I felt like it wasnt important to note them. This was filmed months ago. The new new update wasnt out by then, but the patch update fixed most of them. Make sense?

[@attilaadam7497]

Hi The XMC-2 16 ch. So can work with 9.2.4 chanel ? Thanks

[@raymondayala5355]

Yea

[@TheoneDragon51]

I have been looking at this unit. I have reading a emotiva fourm on this unit. I am a truck driver so not home to deal with issues. I'm also looking at the anthem Avm 60. Same price point I don't need 17 channels. I read the last update brought back old problems. I am thinking the AVM 60 may be the way to go. Thoughs?

[@ThatHomeTheaterDude]

get the anthem. i hear good things.

[@TheoneDragon51]

@@ThatHomeTheaterDude Cool that is the one I am leaning towards.

[@elongatuspiranha]

@@TheoneDragon51 I have had both Anthem and Emotiva. Anthem will have little to no bugs. Emotiva will have some but will get better with time. Sound quality wise Emotiva wins due to Dirac live. Anthem Arc is pretty good, but not on the same level as Dirac. Once you try Dirac, you'll be hooked, trust me.

[@TheoneDragon51]

@@elongatuspiranha I am sure the emotive will at some point. I am on the road a lot as a truck driver. So the wife and kids will just want it to work. I really like what I have heard about Dirac live. I have only used audyssey. I have been happy with it. Still waiting maybe the Emotiva will have the bugs worked out once I get ready to pull the trigger.

[@sebna]

At what levels are you watching your movies? I read that Emo can get pretty harsh and brittle at higher volumes? I tend to watch movies in range of -30 to - 20db and I am afraid it would be too much for Emo and me :). Contemplating going safe with 8805

[@ThatHomeTheaterDude]

sebna not true from what I’ve seen. I think they may be referring to the emo amps. I have heard they before. I run movies at -10 regularly. Sounds beefy.

[@sebna]

@@ThatHomeTheaterDude thank you for letting me know! How do you like it with DIRAC enabled? Is it even better to what you though about it in this review?

[@eddietours3728]

i went from a Marantz to a Lexicon am impress with the Dynamic sound on the lexicon :)

[@rhdtv2002]

Lexicon is no joke..

[@myhometheater7029]

Great video brother. I been looking to upgrade to an emotiva or a denon. It’s not really much difference in the money for the emotiva vs the denon. I may hold off and just get the emotiva. Thanks for the info brother.

[@oneemotiva4975]

HI, I just purchased a New XMC2 in July 2022, I got this to replace my Onkyo RZ5100 Pre-pro. So far it has been a nightmare. Very slow processor, response to command, up to 15 minutes of only going back and fort, Always need to reboot it, due to not linking to the HDMI so no image. on TV. I have a main Media room, that has my music and Theater systems all McIntosh, But this as been a good and bad experience, to the point that Emotiva and I have been sending emails to each others also sent them video of the issues. This system is been use in my studio only, They stated a new firmware is coming and would fixed majority of issues, but I see you have about the same problems 2 years ago> so what progress have they done>? Does not seem to me that a lot as changed since. After 2 years they should have been able to fix all this problems, I spent hours with Brent and others at Emotiva, you are right incredible support. I told them I would wait for the new update, and if does not work I will return it, Cannot deal with this stupid slow response to play a turntable or go back to TV or etc, 15 to 20 minutes is not acceptable, this unit gets confused using their own remote, the Inputs buttons or the Logitech remote>> For the video quality and sound they are very very good for the price point. But man is painful. IF they fix this issues this unit would be incredible for sure. I like emo for my studio, I do use their amps. do I want to keep the XMC2 at this time, I am not sure, but because their support is so good, I will wait for the update after they extended my return date.

[@avtechman77]

That Home Theater Dude.. Any chance of them adding IMAX Enhanced or DTS-X Pro support?

[@ThatHomeTheaterDude]

they are building them in soon. then the expansion ports are coming after

[@avtechman77]

@@ThatHomeTheaterDude So the current units would not be able to support via firmware update?

[@keithiegee1]

How did you tune the XMC2 if you don’t have Dirac?

[@ThatHomeTheaterDude]

manual set up. its easy

[@MrJpdw67]

I'm actually thinking of buying this model, as sound quality goes, how would you say it compares with an AV receiver?

[@gdhugh]

Hope you don't mind my butting in on your question. I've owned AV receivers, several of them, for many, many years. I've owned separates for the past several years. I currently own the XMC2 and can say without a doubt is is the best of the best. Sound quality huge importance to me and this thing is perfect. I could write a age full page but, if your are ready to move into high end audio, this is a great move

[@MrJpdw67]

@@gdhugh thank you for answering my question, its a big leap to take in terms of cost - so hearing from actual users of the product is great. So thank you again :)

[@JesterHammer]

David Hughes i currently have an Anthem Statement d2v which cost me a whopping 10k$. It has Anthem Room Correction but no 4k support whatsoever. My setup is 7.1 and i never intend to add additional speakers just to get Atmos. The xmc-2 looks like an interesting option to me since Anthem are never going to offer an upgrade path or new model. I have been blessed with the d2v sound quality for years and worries about compromising it with a new box which worth considerably less. Xmc-2 with Dirac vs. D2v with ARC ?

[@gdhugh]

@@JesterHammer Dirac Live is all new version 3 designed to work perfect with the three top tier units from Emotiva including the XMC-2. One huge advantage of the Emotiva line is the design from the beginning to evolve with changing formats and standards.

[@nick_at_nite]

There are a lot of negative posts in the Emotiva forum about firmware issues, especially when applying the latest patch to your processor. But this guy brings up a great point in this video; Emotiva is receptive to user feedback. They're actively involved in replying to and providing updates in their forum. I don't think that's possible with the bigger mainstream competition. The cost of admission isn't cheap but you're getting a lot for your money. Plus Emotiva is an American company hailing from beautiful Williamson County, TN., supporting businesses in our own economy has long term benefits.

[@o.c.g.m9426]

🇺🇸 🇺🇲

[@mike2401]

How does this compare with Anthem avm 70 or with marantz 7706?

[@ThatHomeTheaterDude]

comes down to dacs and usability. the Emotiva is the better all around choice, but you get ease of use with the anthem

[@mike2401]

@@ThatHomeTheaterDude it looks like the connections are all xlr. How do i connect it to systems that uses rca?

[@kenr4540]

You did a great review! How does the XMC-2 sound compared to the RMC-1? And is there a big sound difference between the 2 processors?

[@ThatHomeTheaterDude]

Very similar. If you want to save some cash you can with the xmc-2

[@pheotonia]

It's easy to add more sub channels with a Mini DSP.

[@attilaadam7497]

Graet video !! If I buy emotiva xmc2 I need to buy too amplifiler ? Thanks

[@sebna]

If you could get 8805 for 1k less then XMC-2 would XMC-2 be worth 1k more to you? It is the choice I am facing and I understand that XMC-2 sounds better to most but would you be tempted know how they both sound to pay 1k more for XMC-2 or at that big of a difference should 8805 be a obvious choice for me?

[@ThatHomeTheaterDude]

i pay for performance. I dont settle if i can help it

[@rickr2143]

Hello, Looking for the best center channel for my home theater

[@raymondayala5355]

Arendal 1723s THX is the best I’ve heard for smaller home theater. Beats B&Ws and I had the SVS ULTRA center and the SVS sounds anemic compared to the Arendal monitor

[@mvsrpharma]

Thanks

[@ThatGuysPerspective]

So this does not power your speakers too? Or it handles both? I'm confused.

[@ThatGuysPerspective]

Nevermind.

[@ThatHomeTheaterDude]

dude

[@johnsmith-qz4bv]

great video...

[@djspecialpaul]

Nice - i use a processor, too but from StormAudio - and i like it :) - but your processor looks great, too - may i tested it^^.,

[@loshopeful718]

Could you try the monolith HTP-1?

[@ThatHomeTheaterDude]

we're having an issue with monoprice right now. I asked for it months ago and they havent picked up their sub from my old house

[@fooschnickens]

@@ThatHomeTheaterDude Not surprising, their offices are pretty well shut down due to the pandemic. A rep chimes in on the AVS Forums now and again with updates, they're doing their best with what they're allowed to do at this point. Once they're able to open back up safely I'm sure things will pick up quick. For now enjoy the extended loan of that 215 :P

[@godfather1116]

I thought Emotiva was in the process of sending out Dirac Live out to all that purchased an XMC-1 and XMC-2.

[@ThatHomeTheaterDude]

they are. this was filmed months ago.

[@waymonfrench2077]

@@ThatHomeTheaterDude what cross over do you set your subs

[@ShortCircuitedBrewers]

Actually does seem like a good value. Off topic but, how many times do you have to tell yourself to stop turning your wedding ring in a video...lol I do it all the time.. 👍🍻

[@jayjustgames1725]

Is this overkill for a 5.2.4 setup???

[@ThatHomeTheaterDude]

probably but gives you room to expand

[@LS-ti6jo]

I wish AV companies could figure out how to implement new AV standards in software. I've bought so many preamp/pro's over the years that had to ber replaced by some frigging new standard, whether it be Composite to Svideo, then Svideo to Component, then Componenst to HDMI, then on and on and on. The same with ARC, etc. I'm sure the cables have to be changed, but I've spend thousands of $$'s on al lthis stuff (anyone want to by an awesome, obsolete Lexicon MC12, or a Marantz 8802A, I'm your guy)

[@decfsz1988]

Are there many movies with 9.1.6?

[@ThatHomeTheaterDude]

you dont get mixed in any specific number of speakers anymore. Its a signal that your processor decodes and spits sound out to however many speakers you have

[@unfinishedbusiness12]

Looks like they have direct on their website now as a separate purchase

[@unfinishedbusiness12]

I mean dirac

[@ThatHomeTheaterDude]

thats for older processors. they are sending out the dirac kits for free to anyone that bought the XMC2- and RMCs

[@Punisher-1]

How do you like it for music listening?

[@mjfolkerts]

It’s awesome. The front three channels are fully balanced. I bought the Emotiva xpa-dr3 amp for the front, so the signal is fully balanced from the DAC to the speakers. The XMC-2 has a reference stereo mode that eliminates all processing except the high quality DAC. I have a Tidal subscription so I can play CD mastered quality audio through the DAC into a fully balanced reference stereo. It is pristine audio if you desire that.

[@Punisher-1]

@@mjfolkerts Nice, I have that amp too and was considering this processor or the XMC-1 ($1200). Probably would be doing mainly stereo listening.

[@ht.us2235]

Any ideas about music cast with XMC -2

[@mjfolkerts]

GH-TV I think Musiccast is proprietary by Yamaha.

[@BrianGarside]

@@mjfolkerts Great to hear, makes me excited. So one can assume it has a very low HiFi like noise floor?

[@kratoslostson3427]

The king! Blessings us with videos

[@jjguillen65]

That's a bad ass component vato.

[@ThatHomeTheaterDude]

for sure Holmes

[@shockjock35]

What’s the big difference between that one and the RMC-1L?

[@ThatHomeTheaterDude]

the RMC1 has 16 differential channel with the ability to expand to 28 channels. the rmc 1L is the same s this just no expandability the XMC-2 is only differential on the front stage LCR and not expandable

[@craigschray4486]

What were the bugs. You never said??

[@ThatHomeTheaterDude]

slow start up, hangups with audio switching. ALL of it is fixed from what I have seen

[@Jajuka81]

"there are some functionality issues that aren't necessarily perfect". Would be nice to know what these issues are, other than the fact that Emotiva listens to feedback about them.

[@fooschnickens]

Too many to list, just look through the Emotiva forums and on AVS. Lots of frustrated people with some moving to other options and never looking back. The biggest issues I've seen have to do with HDMI sync being lost, the UI being very cumbersome, and general instability (which has gotten better over time with new firmware, but never should have been as bad as it was for a consumer device). Emotiva might be listening to feedback, but changes brought about by that feedback is sluggish at best. Hell, they just now released Dirac for the RMC-1 and XMC-2, a feature listed on both models when launched and promised "eventually" after launching. Now the RMC-1 is 2 years old and the XMC-2 is about to hit a year, that's a helluva wait for a top-billed feature.

[@Jajuka81]

​@@fooschnickens Fair enough. I was just hoping to hear about them in this review. Seemed odd to omit them. ¯\_(ツ)_/¯ I'm sad to hear that Emotiva is lacking in the software/firmware department. I just upgraded away from my UMC-1 that I've been using for about 6-7 years. Needed something with 4k and a better room correction. I had a few issues with the UMC initially, but luckily got them all straightened out long before they EOL'd it. It was pretty solid for what I used it for. Though, it was definitely a lot lower tech than all of the newer units, so I could see them being more prone to software issues.

[@fooschnickens]

@@Jajuka81 yeah it really is a shame. Emo seem to have fallen victim to the same thing many other 'once greats' did when they tried to diversify their catalog too much. Their amps are top notch and speakers sound great, but their software based products fall well short of what I would consider a polished unit. If you're in this price range/class of product, I would give a very hard look at the htp-1 as it's been making waves since release and is one of the main units former Emo users have been jumping ship to.

[@BrianGarside]

@@fooschnickens That is whats shocking is they keep the feature list short so you would think that would allow them to have a really solid piece with no bugs and they still struggle. They just need to hire experienced chip coders vs letting them learn as they go, I hate to say it but its a DIY style pre-pro with great components but does no good if cant integrate them properly. Also the modulelarity is spot on, but issues there too.

[@BrianGarside]

@@fooschnickens Totally agree seen this story

[@danielwander605]

Just had this for over a month. Sounded great for the most part. Didn’t think dts material sounded right. But the issues were so annoying and got worse with the Dirac firmware and absolutely a deal breaker for me. Didn’t find emotiva customer service responsive or helpful. Boxed it up the day my Dirac kit arrived, and switched to monolith.

[@sebna]

How do you find Monolith SQ-wise in comparison?

[@danielwander605]

sebna They are similar. I found the emotiva to be a tad bright so I prefer the monolith sound. But I never got to use Dirac with the emotiva so I could probably have gotten the sound tailored more to my preference.

[@sebna]

@@danielwander605 Did you ever had a chance to compare SQ either to Denon / Marantz offerings?

[@danielwander605]

sebna yea. I had a Marantz receiver for a while before the Emotiva. I really enjoyed it while I had it. I Found the sound to be a little warmer or maybe more laid back than the emotiva and monolith. I prefer the sound I have now, but I had no issue with the marantz while I had it. I also never really got much out of audyssey. I think Dirac is much better

[@sebna]

@@danielwander605 I can get Marantz top processor 8805 for 1k less (2nd hand) then XMC-2. Purley SQ wise, would you say that XMC-2 might be worth the extra 1k or should I stop dreaming about improved SQ and grab lesser SQ-wise Marantz? I would not be able to stretch to Monolith to get best of both words, SQ + stability.

[@mikedisalvo6305]

Wait, why were the movie clips not full screen or proper letterbox on the screen?

[@ThatHomeTheaterDude]

so?

[@erod9088]

User reviews on this haven't been kind. Unexplained shutdowns and super slow source switching. Still no bass management with Dirac.

[@scottlowell493]

I want to upgrade from my MC-700. The MC-700 compromises sound quality by compare. The outlaw 975 is even worse. The XMC-2 uses better parts all the way around.

[@arijaglal7779]

Credits for video title: Chandler Bing

[@ThatHomeTheaterDude]

You caught that eh? hahahah

[@dee1380]

That thang looks clean tho'..

[@mountainmonkey15]

Semper Fi

[@ThatHomeTheaterDude]

HoooRah

[@raulgutierrez1501]

Another Beta unit. For the price can we not get it right?

[@MahawarProductions]

You may benefit greatly by scripting your videos and adding a teleprompter to your recording setup

[@davidgunther1282]

This thing is 2 grand right now.