EMPORIA ENERGY MONITORING GEN3 REVIEW AND INSTALL

IN THIS VIDEO I'LL OPEN BOX WITH GEN3 EMPORIA ENERGY MONITORING AND INSTALL. PLEASE MAKE SURE TO DISCONNECT POWER SOURSE TO THE PANEL YOU INSTALLING THIS DEVICE TO.
Also, in this video I didn't record the power connection installation by accident, you just install black and red wires to each line to available breaker or provided splised wire (basicaly 240v for split fase panels) and white and blue wires together to the neutral bar.
Discord Channel:
/ discord
emporia energy Gen3 affiliated link:
amzn.to/4a6SDi0
THIS VIDEO NOT SPONSORED AND THIS IS NOT A FINANCIAL ADVICE TO BUY OR SELL YOUR CRYPTO DO YOUR OWN RESEARCH
DOWNLOAD FREE ICERIVER MONITORING TOOL HERE:
t.me/swift_min...
If interested in purchasing OC contact Tswift
Official Contacts:
Discord: tswiftz
Telegram: @TswiftUSA
FREE DOWNLOAD DEV FEE 0.5% FIRMWARE HERE:
t.me/swift_min...
Discord Channel:
/ discord
Disclaimer: This video is not sponsored. I purchased this OC firmware with my own KAS and heatsinks and thermal paste purchsed with my own money. Please remember you may loose your warranty or damage your unit. I don’t take any responsibilities for your hardware. Do your own research if you’d like to take a risk.
Thermal Imaging camera
TOPDON TC005 256 x 192 IR High Resolution Dual-Camera Thermal Imaging Camera with 12-Hour Battery Life and 2MP
amzn.to/3vn1UTV
Affiliate Amazon links for thermal glue, heatsinks and thermal paste. Thank you for your support.
Alphacool 17425 GPU RAM Copper Heatsinks 6,5x6,5mm
amzn.to/3TMJsOo
GENNEL G109 10gram Thermal Conductive Glue
amzn.to/47hJ3qB

[@stephenkyu]

I think the main benefit of this design is that you can shorten the leads of the CTs which makes the installation cleaner.

[@DontMindMeMining]

yeah, thats a good idea, once you cut the wires though setup is pretty much permanent wich in most of the cases it is anyway

[@radian2323]

Those connectors are great. It's not like it's going to be withstanding vibration that could loosen it. I've used those connectors on christmas lighting controllers.

[@DontMindMeMining]

Yes, I like them much better than previous ones and you can shorten the wires for permanent install to get rid of those spaghetti around the panel.

[@SacredTech-hr1kb]

Informative, but when I view this video, it is BLANK form 8:47 to 12:28!

[@DontMindMeMining]

thank you for noticing this, not sure how it got cut out or not uploaded originally. Anyways I cut this blank section to make it normal.

[@Thats_all_she_wrote_Dear_John]

The most dangerous part of the installation is that you leave out with just a few comments; you know what you are doing, but many may not, and to leave out the connecting of POWER to this without a detailed video of doing so makes me wonder about your teaching skills. I would never hire someone who will sweep the floor and leave the corners untouched.

[@DontMindMeMining]

Thanks for comment, I know, my camera was off while connecting to the power. It’s not that hard for any one with basic skills and who is not scared to open main or sub panel up. I don’t think someone will try to open main panel without knowing the basics of electric work that would be a big mistake.

[@Hathenbrucksteelworks]

You seem to know everything. This makes me wonder why you even watched the video.

[@Thats_all_she_wrote_Dear_John]

Sloppy!!

[@DontMindMeMining]

Main point of this video is how different it is from gen2 I think I did another install with it.

[@Hathenbrucksteelworks]

He made it pretty clear that it wasn't the final install.