End Termination of 33KV 3CX120SQMM HT Cable,

5 Must-Have Tools for Efficient and Effective Cable Jointing
As a cable jointer, you are responsible for ensuring the safe and efficient connection of cables in various electrical systems. To perform your job effectively, it is important to have the right tools and equipment at your disposal. Here are 5 essential tools every cable jointer should have in their toolkit.
Cable Stripper: A high-quality cable stripper is a must-have tool for cable jointing. This tool helps you to remove the outer insulation of a cable, allowing you to prepare it for jointing. It should have adjustable blades to accommodate different cable sizes, and be made of durable materials to ensure a long lifespan.
Cable Cutter: Cable cutters are another essential tool for cable jointing. They are used to cut the cable to the correct length, and should be designed to cut through the outer insulation and inner conductors without damaging them. Look for a cutter that is comfortable to use and has a cutting edge that stays sharp.
Heat Gun: A heat gun is a crucial tool for cable jointing, especially for heat shrink cable joints. The heat gun is used to activate the heat shrink tubing, causing it to shrink and form a tight seal around the joint. It should be powerful enough to heat the heat shrink tubing evenly, and have a temperature control to prevent overheating.
Cable Jointing Compounds: Cable jointing compounds are used to fill any gaps in the cable joint, ensuring a strong and durable connection. Look for a compound that is easy to apply, and provides good insulation and protection from moisture and environmental elements.
Measuring Tape: A measuring tape is a simple, but essential tool for cable jointing. It is used to measure the length of the cable, and to ensure that the cable is cut to the correct length before jointing. Look for a measuring tape that is durable and easy to read, with a locking mechanism to hold the measurement in place.
Having these 5 essential tools in your toolkit will ensure that you have everything you need to perform cable jointing efficiently and effectively. Remember to always use the proper techniques and follow all safety protocols to ensure the safety of yourself and those around you
End Termination of 33KV 3CX120SQMM HT Cable, HT Cable Termination, Jointer Training, Termination kit kaise bharna hai, HV cable Termination kaise kerna hai, HT Cable joint kit
#ht cable Termination #cable Termination Work #electrical joints and connections
cable Termination interview questions
cable Termination tools

[@rameshwerthapa9991]

बहुत ही बढ़िया जानकारी दे❤❤👍👍

[@AkramAnsari.678]

@@rameshwerthapa9991 glad you enjoyed Keep watching and supporting

[@alajingisivakumar5592]

Thank u bhayya. Raju bhayya also a brilliant worker.

[@AkramAnsari.678]

@@alajingisivakumar5592 thanks

[@MuhammadMuzammal-eg6tl]

great work

[@AkramAnsari.678]

Glad you enjoyed Keep watching and supporting my channel

[@jamilusmani-m3x]

Great sir thanks so much

[@AkramAnsari.678]

@@jamilusmani-m3x glad you enjoyed Keep watching and supporting my channel

[@pannierselvamsanthoshkumar8958]

Good video i will like it

[@AkramAnsari.678]

@@pannierselvamsanthoshkumar8958 glad you enjoyed Visit other videos, I am sure you will like those too

[@RahulSahu-zu1eb]

Very nice video sir 💯💯

[@AkramAnsari.678]

Keep watching

[@bishuroy6146]

It's helpfull details for termination

[@AkramAnsari.678]

Thanks

[@rustemmemmedov7134]

There are special tools for stripping the semi-conductive layer, if you work with it, your work will be both fast and high-quality, and there is no need for additional polishing. The sharp edges at the end of the semi-conductor are counterintuitive and one of the reasons for the coupling to fail.

[@AkramAnsari.678]

Agreed Many Joint makers don't have proper tool kits required to to make joints due to economic issues and rate of joints so these videos are those who are working with available tools with them and can make a proper joint with these tools

[@rahulagarwal8213]

Isme cable ka konsa wala Core R, Y, B phase jayega , ye kaise pata chalta hai ? Ya koi sa bhi connect kar sakte hai ??

[@AkramAnsari.678]

First of all, we make the end termination of anyone at the end of cable as per equipment R,Y,B nomenclature thereafter with reference to equipment R,Y,B phase sequence we check and mark the same R,Y,B at the other end of the cable. Now, we have to ensure that what we marked R,Y,B phase sequence at second end of cable, it should be matched with the equipment phase sequence while making second end termination.

[@RahulSahu-zu1eb]

Amazing

[@AkramAnsari.678]

Thanks

[@examcracker3019]

Y dont we connect conductors directly in panel y we fit cable in between transformer and panel

[@AkramAnsari.678]

@@examcracker3019 1-as per normal practice cables to be connected to Bus Bar and there we can connect with help of fasteners ( hardware) this is why we need to use end Termination kits

[@AkramAnsari.678]

2- to complete the circuit from Panel to Transformer.

[@Somlal]

Insulation semi conductor screen removal is totally wrong, could end up damaging the insulation, use depth knife instead.

[@AkramAnsari.678]

@@Somlal I appreciate your concern and also want to share my experience that it is always better to use proper tool to specific job. But it doesn't mean this is wrong practice, I have been seeing the same method in practice all over India and no failure found so far

[@bishuroy6146]

Cell pack ka training keise milega sir g

[@राज-च2छ]

सर केबल testing ka भी वीडियो बनाए साथ में ही VLF testing of cable

[@AkramAnsari.678]

Thanks for your interest, I will upload these Videos asap

[@राज-च2छ]

@@AkramAnsari.678 thanks sir ji, cable laying और pulling का भी वीडियो प्लीज़ सर जी

[@noelfaithfulkari2857]

No English subtitle or version??

[@AkramAnsari.678]

Thanks for your comment I will work on it

[@rkcreation7155]

❤❤❤

[@AjayKumar-uq8vq]

Banda may kaha par plant h sir aur kitna MW ka h sir plant

[@AkramAnsari.678]

70 MW Village Alona

[@gollugowrinaidu6541]

Which company kit

[@AkramAnsari.678]

Cell Pack

[@gopinathsutradhar5446]

Very nice

[@AkramAnsari.678]

Thanks Keep Watching

[@AkramAnsari.678]

I'll let you know asap

[@bishuroy6146]

Sir, i am 3m certified jointer, how to get cellpack training?

[@CHANDTARA9006]

🎉🎉🎉

[@zaitonyahya4768]

102

[@AkramAnsari.678]

@@zaitonyahya4768 sorry, I didn't understand

[@Mr.Sandeep413]

Ye koi experience holder nahi hai bz jo earthing kar rha usko hmsha scratch karke lgana chahiye jo proper earth pakde

[@AkramAnsari.678]

Thanks for your valuable feedback, but it depends on the make of the jointing kits. For this we cannot say anyone he is not experienced

[@AkramAnsari.678]

My latest video on major equipment of switchyard and MCR in solar power plant kzbin.info/www/bejne/l2Gac4SQe6p7npYsi=g1fuc7y-Q7dh3kPh

[@joysikdar1023]

Poor workmanship

[@AkramAnsari.678]

@@joysikdar1023 reason?