Endurance by OcCre Full Build

  Рет қаралды 654

Geno Joe's Modeling

Geno Joe's Modeling

Күн бұрын

This model is the second of hopefully many to follow. It was manufacture by OcCre and was a spectacular kit! Many thanks to all who led me through when I needed a little guidance. Looking forward to starting my next kit!
Construction Hours
9/16/2022 Keel 2.0
9/18/2022 Deck planks 3.5
9/19/2022 Deck nails, sanded, varnished 3.5
9/20/2022 Attach the decks 2.0
9/24/2022 Sanding and shaping the keel 2.5
9/25/2022 Prepping bulwarks 1.0
9/26/2022 Attaching bulwarks 2.0
9/27/2022 Paint deck trim 1.0
9/27/2022 Cut out and sand deck trim boards 2.0
9/29/2022 Paint deck trim, fasten side rails 1.5
9/30/2022 Bulwarks, trim, planks 4.0
10/1/2022 Planking first layer 6.5
10/2/2022 Planking first layer 2.5
10/3/2022 Planking first layer 3.0
10/4/2022 Planking first layer 3.0
10/5/2022 Planking first layer 1.0
10/6/2022 Planking first layer 3.0
10/9/2022 Prep first layer for sanding 1.5
10/10/2022 Prep first layer for sanding 1.0
10/11/2022 Sanding the hull 1.0
10/13/2022 Installing bow section 1.0
10/14/2022 Sand hull and bow section 3.0
10/16/2022 Planking second layer 3.5
10/17/2022 Planking second layer 2.0
10/20/2022 Planking second layer 3.5
10/21/2022 Planking second layer 5.5
10/22/2022 Planking second layer 2.5
10/22/2022 Hull sanded 1.0
10/22/2022 Cut and stain rails 2.0
10/23/2022 Drill portholes and final hull sanding 1.5
10/23/2022 Stain and install railings 2.5
10/24/2022 Varnish hull 1.0
10/24/2022 Hull paint 2 coats 0.5
10/24/2022 Edge and trim railings and bullworks 1.0
10/26/2022 Rubbing strafes, paint trim, install portholes 2.0
10/26/2022 Install name plates, hawsepipe, varnish hull 3.0
10/27/2022 Shape and install rudder and propeller 0.5
10/28/2022 Paint and install cabin doors 1.0
11/2/2022 Prime deck metal parts 1.5
11/10/2022 Porthole glass 0.5
11/13/2022 Deck components 1 3.0
11/13/2022 Deck components 2 3.5
11/17/2022 Deck house 1 1.5
11/18/2022 Deck house 2, deadeyes 3.0
11/19/2022 Complete deck house and vents 6.0
11/21/2022 Deck house portholes and clean up 0.5
11/22/2022 Deck furniture 6.0
11/22/2022 Stack pipes 1.0
11/23/2022 Deck furniture 2 and varnish 6.0
11/27/2022 Railing posts 2.0
12/1/2022 Build, paint, and install ladders 2.5
12/2/2022 Install thread railings 2.0
12/2/2022 Assemble and paint doghouses 2.5
12/3/2022 Add canvas and install doghouses 2.0
12/3/2022 Paint life boat davits, anchors, etc. 1.5
12/6/2022 Paint railings 1.0
12/26/2022 Lower Turnbuckles 1.0
2/11/2023 Touch up hull and railings 1.0
4/12/2024 Chain Plates 3.5
4/13/2024 David's, anchors, chains, sleds 4.5
4/15/2024 Life boat frames 3.5
4/16/2024 Shape life boat ribs 1.0
4/18/2024 Plank life boats, rough sand 4.0
4/19/2024 Life boat trimmed and stained, floors installed 3.5
4/20/2024 Sand and paint life boats 1.5
4/23/2024 Size and cut all masts, spars, and bowsprit 2.0
4/29/2024 Bowsprit and Fore Mast 1.5
5/1/2024 Fore Mast and Main Mast 1.5
5/2/2024 Fore Mast and Main Mast 3.0
5/3/2024 Mizen mast 2.0
5/3/2024 Paint all masts, yards, bowsprit, and spars 2.5
5/4/2024 Varnish the entire ship (satin) 1.0
5/7/2024 Install all masts, yards, spars 1.5
5/9/2024 Rigging (shrouds and ratlines) 6.5
5/14/2024 Rigging (shrouds and ratlines) 2.0
5/15/2024 Rigging (shrouds and ratlines) 1.5
5/16/2024 Rigging (shrouds and ratlines) 5.5
5/18/2024 Rigging (standing) 1.5
5/18/2024 Rigging (fore mast) 5.0
5/21/2024 Rigging 3.5
5/22/2024 Sails and rigging 2.0
5/22/2024 Sails and rigging 4.5
5/25/2024 Sails and rigging 4.0
5/25/2024 Sails and rigging 3.5
5/26/2024 Sails and rigging 5.0
5/27/2024 Install lifeboats (4) 2.0
5/28/2024 Final rigging and flag 2.0
5/29/2024 Fabricate and install 3 life preservers 1.5
5/30/2024 Touch up 1.0
Total Hours: 220.0
Total Months: 6.5
Please feel free to email or send me a message if I can be any assistance to you.
Thank you, Joe

Пікірлер: 8
@OlhaBatchvarov
@OlhaBatchvarov 2 ай бұрын
Congratulations on finishing 👏
@genojoe3176
@genojoe3176 2 ай бұрын
Thank you! That means a lot to me coming from you.
@AcquiredByGod
@AcquiredByGod 2 ай бұрын
Amazing Build, Joe! This ship is actually on my list of kits I want to build myself. Great skills 👌
@genojoe3176
@genojoe3176 2 ай бұрын
Thank you! That is my second wooden ship model. I will be starting my next one very shorting. I will follow your build!
@wolfgangzinn
@wolfgangzinn 2 ай бұрын
Nice build. Looks great
@genojoe3176
@genojoe3176 2 ай бұрын
Thank you!
@g-kip
@g-kip 2 ай бұрын
Nice Build Joe she looks great
@genojoe3176
@genojoe3176 2 ай бұрын
Thank you! I am proud of it.
Which Company Is The Best? 2
24:20
John Aliprantis
Рет қаралды 34 М.
Electromagnetic Aircraft Launcher
15:09
Tom Stanton
Рет қаралды 1,5 МЛН
Nastya and balloon challenge
00:23
Nastya
Рет қаралды 53 МЛН
How We Misunderstood HILLFORTS
16:31
Paul Whitewick
Рет қаралды 358 М.
FOUR 'Great' WWII Tanks That Were Actually Terrible
19:46
Sideprojects
Рет қаралды 155 М.
How a 16th Century Explorer's Sailing Ship Works
41:08
Animagraffs
Рет қаралды 1,1 МЛН
Occre Endurance Unboxing
6:34
Aris modelbouw
Рет қаралды 9 М.
How 3 Phase Power works: why 3 phases?
14:41
The Engineering Mindset
Рет қаралды 983 М.
Nelson's Battles in 3D: Cape St. Vincent
26:11
Epic History
Рет қаралды 1,1 МЛН
These are 5 ship model kits by OCCRE I'd consider to build
5:39