[ENG SUB] EMG TTI Combat Master John Wick ( Steel Version ) GBB

[@jameslee3424]

師兄呢支鋼版尋日我去左拎上手睇好有重量感，比平版既重同埋顏色都比平價版靚少少。心郁郁

[@jerzyp103]

Can you make video with wobble of slide, alignment of rear part of slide to frame and it movement up/down and right/left?

[@cuua360]

good

[@dogjumpjump-djj]

因為, 5.4吋回膛桿太長, 不可就咁拆出來, 一定要分開兩段拆出來 否則要成條過就好似FPR果支, 先拆後面飛機組先可拆前面..

[@kwindairsoft]

呢個我明白 ,我係嫌佢個二段設計都衰...收機米 ,好似正常二段咁直接螺牙扭入去簡簡單單咪幾好

[@dogjumpjump-djj]

KWind Airsoft 係。最怕打打下鬆咗成條飛出來。機米唔太安全

[@jifuge863]

hey man very nice review. does it rattle like the aluminum version?

[@kwindairsoft]

i dont have aluminum version , so dont know how rattle on the aluminum version , Steel version still have rattle , but i can accept , not too much (in my opinion)

[@jifuge863]

@@kwindairsoft ok thx man and keep it up

[@mingwong2201]

請問 FPR匣可以用倒嗎？

[@kaimingsit6893]

新手一問？how much?那裏入？

[@chinloklau3867]

請問你支鋼版滑架同下身虛位情況好唔好過平版？

[@kwindairsoft]

我冇買平版,所以唔清楚平版有幾多虛位 ,以我自己角度黎講係可以接受的...只算輕微...另外一點就係佢外管CHAMBER位今次係做得非常好...因為大部份HI-CAPA類改件都有刮膛呢個毛病要修...而我呢支完全冇呢個問題, CHAMBER位未刮甩過色 ,另外建議如果想體驗下上下身虛位的話...可以去店舖問問拎上手睇下支槍...再搖下佢睇下自己可唔可以接受

[@wet9son202]

請問6:38分 marui mag 係咩型號? 如果我想買應該search d咩? Thanks!!!

[@kwindairsoft]

就MARUI HI-CAPA 5.1 銀色彈匣

[@yukihiro2140]

師兄相問下呢枝槍可唔可以Power Stroke？ 感謝！

[@kwindairsoft]

原裝可以(請看1分26秒) , 好似我咁改左前面迴膛彈弓套的話 , 迴膛桿要相應換返薄D

[@yukihiro2140]

@@kwindairsoft Thx，如果套筒攝左o ring的話，回膛桿buffer 膠要換返薄d？

[@kwindairsoft]

@@yukihiro2140 YES ,換薄dd就OK...唔換的話都可以POWER STROKE...但唔係100%一定成功...有少機會差少少個SLIDE STOP落唔晒

[@joaomarcusvieira8911]

can i put tracer in steel version?

[@kwindairsoft]

cant , not threaded barrel

[@williammak7824]

請問膠圈可以边度揾到?

[@kwindairsoft]

旺角有D可以配膠圈既店可以搵到

[@chinloklau3867]

請問你用果個膠圈是什麼膠圈呢？

[@kwindairsoft]

普通膠圈而已, 你係想問尺寸嗎?

[@chinloklau3867]

是@@kwindairsoft

[@kwindairsoft]

@@chinloklau3867 我的是8X2

[@chinloklau3867]

多謝指教