Engine Mods For MORE POWER! Super Seicento 1242 8V Head Swap

[@dotmars2568]

This car never fails to make me smile.

[@Nellis202]

You’re right ! I’ve been following this as well and I’ve realized ……. I’m always smiling .

[@adzyack123]

If you have owned one then you just appreciate everything about this

[@McGrumpyMan]

Conversion completed, nice work. Good to see you back!

[@davidsimms6609]

Dads back working the magic!

[@MUV4TRUK4]

he's back, good times

[@itsmephil2255]

Well it's about time young Joe!!!! Missed the videos on the Seicento...and food to see Super Dad in team leader mode Nice to have you back fella 👍

[@joaoguedes__]

I have a 106 and these little hatchbacks fill up my heart with joy, great work, performance mods are always a good investment

[@OdykKayne]

Finally catching up on this series! Nice to see the yellow nugget on my screen again! :) I love how a lot of these older FIATs seem to have some 'Lego' parts you can 'plug in' from other cars of the same era, like the Punto!

[@MillerCorner]

Welcome back dude! :D it's definitely helpful!

[@OdykKayne]

@@MillerCorner Cheers mate! Just got myself caught up to Part 1 of the Nurburgring trip! Glad the little Super Sei is doing well! Humdrum is still around too...just had a little rust fixed and need to get the headlights buffed as they are yellow from UV damage :/

[@PaulinhoThompson]

I can't wait to hear how it sounds and see how it goes 👍🏻

[@leonrds7802]

You've made amazing changes to it the seicento so long since you haven't made a video and I'm glad to see it renewed👍👌👊

[@pascalland1441]

Dude, you're back! Great work on the Seicento.

[@smoothmicra]

Nice to see you persevere with the little yellow rocket. Fiat may not score top marks for build quality but there is brilliance in some of their designs. Ergonomic comfort for the driver and enjoyable driving characteristics to keep you smiling. Also, hooray for brilliant dads everyone! 😁

[@oiudsaf]

Hey your back nice one can't wait to see what your going to do with the seicento

[@dcd5050]

years ago i didnt understand nothing about this and everyone told me out the 1.4 16v its plug and play, i bought the engine and parts needed and told my mechanic to install, he laughed at me and said whoever told you its plug and play clearly has no clue what they are talking about, the only plug and play bit was the engine mounts, well, some months later i ended up with a 1.4 16v seicento on custom megasquirt ecu and electronics, it wasnt plug and play but damn it was worth it

[@stephenbrook9085]

Good to see a new video!

[@Baldis_basics_plus]

I have the same and I plan on making it turbo as well

[@duncanrose2663]

The multi layer steel gaskets are tinner than the fibre ones so you'll actually raise the compression ratio.

[@MillerCorner]

Ah, good to know!

[@prospeed87]

For more power.. instal cams 866 from punto 75.. valve regulated 40 intake 45 exsaust..

[@christophersmith4706]

You are making me feel young again, I came away from your video wanted to change my Seicento Active 1108cc for a 1242cc!

[@MillerCorner]

Do it!

[@markonmotoring]

That was fascinating, realy enjoyed that.

[@Nellis202]

You , sir are a genius !

[@ronsimpson261]

So did you check valve clearance after lapping in the valves in they will be tighter when the valve is ground in and move deeper in to the head , i know the shims are a pain but you can grind some off the thickness .

[@MillerCorner]

Yup, all good! 😁

[@paultaylor9652]

Lovely Jubbly, always a great video not just to watch but to listen to as well, car looks great do you have any plans for it 20th birthday?

[@MillerCorner]

Thanks Paul! Plenty to come, stay tuned...

[@SkysaxonDragonslayer]

If you own a MPI, you can swap the engine with the Punto / Lancia Y 1.2L 16v with 85hp.. It plugs right onto your gearbox and the Blackbox fits plug and play! So you just need Blackbox - Starter lock with key and the engine which can be found for 300-500,-€ when you buy a complete car without MOT / TÜV. SPI are good for tuning the original engine, but bad for swaps 😇 Btw - had to sell my Abarth and SX, but will search for another one soon!

[@Pi3tt3r]

SPI is easier to swap lol

[@SkysaxonDragonslayer]

@@Pi3tt3r - you can’t swap the 1.2L 16v into an SPI without changing the harness… So would you please be so kind and explain how SPI should be easier to swap?

[@Pi3tt3r]

@@SkysaxonDragonslayer SPI is better "universal" base to swap. You just need to adjust harness. Availability of ECUs with 2 plugs is limited which is common issue during changing engine from 1.1 MPI. If you would like to put 73KM engine (like Joe did) you would just need to divide wiring from 1 injector to 4 because they are connected parallelly. I have 1.2 8vT swap and its based on SPI harness ;)

[@SkysaxonDragonslayer]

@@Pi3tt3r - the 1.2L 8v isn’t worth a swap… 60hp instead of 55… You can tune it for sure, but just the swap is not worth the effort! Instead the 16v delivers 85hp without any tuning and can fit plug and play into an MPI … So that’s why I said SPI is good for tuning the engine, which is a pain with the MPI, but MPI is great for engine swap!

[@Pi3tt3r]

@@SkysaxonDragonslayer But I mean 1.2 8v 73KM. Nobody is swapping to 60 :D its totally pointless. Its the most popular swap in Poland ;) 16v is much less popular and problematic

[@gerrypowell2748]

Good job👌

[@roberttruscello6503]

where did you get the cold air intake...tia

[@longrangevolley425]

Are you sure the valves are bigger ? I compared 8v spi heads, 1.0 to 1.2 only one side of the valves was bigger (intake i think cant remember), everyone told me 1.1 and 1.2 heads are the same, mpi might be different tho

[@David_S1985]

The wrinkle paint works really well but needs to go in an oven to get it to achieve a proper finish. It doesn't state this on the can but it should in my opinion.

[@duchtdixon894]

Che motore monta

[@A46648]

That breather hose is bend

[@jackcoleman4397]

Hp ?????

[@Richard-Bullock]

So how many raging Italian stallions is the Super Seicento packing now?

[@MillerCorner]

We might have to find a Dyno... 👀

[@Richard-Bullock]

@@MillerCorner I bet it's substantially more than the 50 bhp my K10 Micra has.

[@dziadzio6666]

Naw you need 1.4 turbo 150km from fiat brawo all plug and play 😅

[@MillerCorner]

Not plug and play though 😬

[@antoniotignola2076]

Hai montato la stessa testata della 600 euro 3 perché i motori 1100 e 1200 euro 3 sono uguali 😂 hanno lo stesso albero a camme 4x4.... Il peggiore... Meglio se metti il camme 866 con la mappa ecu con limite a 7500 giri

[@kalleklp7291]

Very nice. :) The FIRE engine is an old construction and started some 30 years ago. Over time it has gone from carburetted, to single-point injection, and to multi-point injection. It sits in countless FIAT models and even Ford KA. en.wikipedia.org/wiki/Fully_Integrated_Robotised_Engine It's a rock-solid construction and has anywhere from 34 to 180 HP. My Fiat Grande Punto 1,4 16V has it too and I'm very pleased with it. He,he..the angle gauge reminds me of the head job I did on my Fiat Uno back in the 90s...same engine, same procedure. :)

[@a112CRO]

Do You realize that valves are the same?

[@Anglosaxon69]

Looks like a giant yellow tampon😂

[@MillerCorner]

That's just the look I was going for!

[@PaulinhoThompson]

@@MillerCorner 🤣