Engine Oil & Oil Filter Change On JCB 8014, 8016, 8018 and 8020 Mini Excavator.

[@missionexcavator9113]

Where to buy: - the engine oil filter - amzn.to/2Z9P2gM - the engine oil type amzn.to/326LH41 - drain pans amzn.to/3bAmjH0 - measuring container amzn.to/2F7WhPc - socket wrench set amzn.to/3i8VTOZ - filter wrenches amzn.to/2DBmx49 0:00 Preparing the machine. 0:59 How to remove the engine / undercarriage cover. 2:15 How to check engine oil level. 2:57 Where is the oil filter located. 3:50 Unscrewing the drain plug and draining the old oil. 4:38 What oil to use and how much oil (oil type and capacity). 5:20 How to unscrew the old oil filter. 5:43 Oil filter tool. 7:09 Fitting new oil filter. 8:58 Filling the new engine oil. 10:14 Cranking the engine for the oil to get to it.

[@8Jory]

I'm actually going to school to be a heavy equipment technician. We had a local contractor donate one of these for us to try and fix after they beat the crap out of it. Should be a fun learning experience!

[@tintinlavigne5257]

Next you can before opening the drain plug open the top cap ( where you fill the engine whit oil, if you want. It will cancel or call down the glup effect

[@missionexcavator9113]

Great tip Tintin. Thank you!

[@patrikturna320]

I lifted of cabin to change oil filter :-/ . The JCB constructers was probably drunked when they assemble this machine

[@andreiandrei4310]

Dacă indepartezi rezervorul de combustibil cred ca va fi mai usoara operatiunea de înlocuire a filtrului de ulei

[@klydolph2]

Many thanks for the video. I have a 2008 JCB 8020 and I could not get the oil filter out from below. Tried for hours. Watched your video again and again. I tried bending the engine to the side with a pry bar (I believe it sits on rubber mounts, but it did not work. I finally wriggled the filter out through the access panel under the cab door.

[@mattikurkinen9686]

Helou, dont buy orginal jcb Oilfiltter its too big, and wery tight. I buy Donaldson P550335 oil filter, and that fitting much better.

[@TheJafari1]

Thanks buddy

[@reginlindenskov6410]

Hello, where can i find service manual for 8018 ?

[@tintinlavigne5257]

👍 next year you will disassemble it and rebuild it like new with blinded eyes like your bikes. Don't worry those machine are very forgiveness with new mechanic it's a good platform to push your skills

[@thomascanedi3690]

Thanks for the videos. Any videos to change Hydraulic oil and both tracks oil? Thanks

[@wildcatwilly]

I just purchased one of these machines. Could you do a in-depth look at the controls and functions? My machine has set out and is Sun faded so I can't tell what all of the toggles do.

[@tintinlavigne5257]

Wy don't have you posted it on your regular chanel? If it's for shaping some trail for bike, it's already part of the bike family 😍

[@missionexcavator9113]

I don't want to put there a content, that's not directly related to bikes, but I'm already building a backyard trail and I already made a lot of materials, which will be published on a SickBiker channel.

[@blackmore.]

Widzę że Daniel się z rowerów na koparki przesiada

[@missionexcavator9113]

Eee, za wolne ;)

[@hireplus1516]

I was hoping you were going to show the real easy secret for how to change the oil filter. JCB told be to remove the fuel tank, which gives really good access to the filter. It does but, putting the bolts back in is a struggle. Poor design from JCB.

[@jamdim7047]

Do you sell this mini digger and How Much?

[@choseechosovic45]

Hello, please can you give me video or advice, how i cam change HYDRAULIC FILTER on JCB 8020 ? Thank you

[@thomascanedi3690]

Thanks for the videos. Any videos to change Hydraulic oil and both tracks oil? Thanks

[@missionexcavator9113]

Thanks for watching! Waiting for better weather and then will replace the hydraulic oil.

[@stelianghita5654]

Nice job! How many hours you do till the next oil change? Thanks