Engine Run Stand Build #2

Building my second engine run stand.
Things that might help with a project like this:
Caster Wheels: amzn.to/3fpYxUB
Dewalt Grease Gun: amzn.to/3WoQ7gP
Radiator: amzn.to/3Dw3iDW
Overflow Tank: amzn.to/3NCFP8U
Fuel Cell: amzn.to/3WugSk3
Bellhousing: amzn.to/3sTNeHf
Switch Panel: amzn.to/3gV0nwT
Electric Box: amzn.to/3DwqAtw
This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.

[@mossman381]

Things that might help with a project like this: Caster Wheels: amzn.to/3fpYxUB Dewalt Grease Gun: amzn.to/3WoQ7gP Radiator: amzn.to/3Dw3iDW Overflow Tank: amzn.to/3NCFP8U Fuel Cell: amzn.to/3WugSk3 Bellhousing: amzn.to/3sTNeHf Switch Panel: amzn.to/3gV0nwT Electric Box: amzn.to/3DwqAtw This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.

[@seanwalsh999]

Nice job, a lot better than an engine sitting on two old tiers.

[@20havenfun08]

Great job:) I keep going back watching this video... thank you:)

[@mossman381]

Glad you enjoyed it!

[@richardsmith-qy6vl]

That is a really nice run stand you built you should be proud of your work it looks alot better the ones I see for sale you have some really good ideas .

[@mossman381]

Thanks 👍

[@europeantinbeater]

I Haven't gotten a notice on your channel in forever. THANK YOU for the list of parts.

[@mossman381]

KZbin won't push my videos for some reason. Might be because I don't put ads during the video. Only in the beginning and end.

[@rustynutzclassicrestorations]

Great engine stand! .. got to build one myself .. What I would do is add some expanded metal as a radiator grill ... to add as protections ... Just my two cents worth ..

[@Fly_Navy]

Nice job

[@ben68442]

Nice, very similar to the stand I made for my 455 build. have a look.

[@superdutyman9186]

Nice I always wanted one

[@mossman381]

Tried to get some wiring done tonight but didn't get very far. I hope this weekend we fire this engine up.

[@bigal878]

Great job. Do you have any plans for this stand so I can replicate it for my engine over here in Australia? Thanks 👍🇦🇺

[@mossman381]

Check out my first run stand build. I show more detail and tell some measurements as I build it.

[@mikedixon6508]

Great stand and work... Would like the measurements. Thanks

[@mossman381]

Check out my first engine run stand build. This was just a quick run down of the new run stand. I show more details with my first run stand videos.

[@4nwtf643]

Now that you’ve had some time/experience with the Blueprint 396 & 400, do you have a preference and/or see a difference in power? Thx

[@mossman381]

It's hard to compare the two in totally different vehicles. The 396 in the Camaro is way faster and feels way more powerful. It's a lot lighter than the truck and it has a manual trans. The 400 in the truck has an auto trans with a higher stall. It goes if you push the go pedal hard enough. Still not sure that B&M trans is working to its full potential. I think they are pretty even power wise. On the dyno my 400 made more torque.

[@4nwtf643]

Thanks! I’m trying to decide and talked with blue print today to clarify a few things I had questions about. The person I spoke with said that it’s a 4-5 month wait on the 400 turn key and 45-90 days on a dressed long block 396. Trying to make a decision between these 2 and I’m looking at one other motor from another company. Nerve racking 😂😂

[@mossman381]

Summit Racing has the fully dressed 396 in stock. www.summitracing.com/parts/mll-bp3961ctc

[@rlhauk3715]

Who makes the motor mounts or where did you buy ? Thanks PS; How high is the centerline of the crank above the main two inch rail ?

[@mossman381]

I have everything linked in the description. It looks to be about 15" to crank centerline.

[@rlhauk3715]

Thanks fir the dimension, nice stand. . . . .new motor mounts not listed.

[@mossman381]

@@rlhauk3715 Check out my first engine build video. I go into more detail and I am sure that video has the motor mounts.

[@mossman381]

Motor mounts: amzn.to/3SIcHjh

[@jayholmes8893]

How can I get measurements on how to make this stand

[@mossman381]

You can watch my first engine run stand videos. I give a lot more detail in those videos. This was the second stand I built and didn't feel the need to go into that much detail.

[@Vcoldduck]

Spec’s

[@mossman381]

I don't have any plans for the run stand but if you watch my first run stand build, I go into much more detail.

[@petermoto409]

Zerk, not zert.

[@mossman381]

I don't need my Wisconsin accent critiqued by anyone. If you don't like the way I talk don't watch my videos.

[@petermoto409]

@@mossman381 Wow, I wouldn't think someone from Wisconsin would be so thin skinned. Dude, I was correcting the word, not being critical of your accent. Sorry if that offended you.

[@mossman381]

I am not offended. I just don't want to be corrected for little nothings. I just didn't emphasize the k. I can say the work however I want just as long as people understand what I am talking about. You obviously knew what I was talking about so why leave a comment?? Judging by the oil priming comment you are a know it all. That is why the comment was left.

[@petermoto409]

@@mossman381 So knowing a better way to do something and sharing that makes me a know it all. Wow, that is really cool. Fact is I was shown this way over 30 years ago and found it worked MUCH better. Sorry for sharing my deep wealth of knowledge with you and the internet. Dude, I have to say, you are in the WRONG place to not want to be corrected. I don't know how you can exist on the internet with such think skin.

[@mossman381]

@@petermoto409 There you go again. You "corrected" me. Because you know it all right. And your "deep wealth of knowledge". You are a classic know it all. You can prime an engine just fine the way I did it. If you really want to help people with all your knowledge, why aren't you making videos???