Engraving a Custom 1911

[@miguelangelnicola4093]

Your work is impressive, congratulations. But I also want to thank you for the time you take to answer each of the questions that your followers ask you. Thank you

[@ChickenTendies03]

As Promised, Very Cool Engravings Definitely Want To Learn How To Do This In The Future

[@wilsonmarcelo8400]

Me too from Philippines

[@Ghostmannnnn]

Did you end up learning ?

[@BR5494]

Great.work.the.poor.man. Can.get.engraveing.well. Done.BRAVO.🏴‍☠️🇺🇸🏁

[@joemomma931]

WOW!!! Amazing work

[@eisen_engrave]

Great video

[@luxuryFirearmservices1911]

Thanks!

[@markwatts1666]

Looks killer . I'm just starting with my laser. Can you point me in the right direction for grids for stainless . I have a 30w fiber laser thank you

[@pkbrowerstudiosllc5434]

He provides tutorials: www.jstacticaldesigns.com/custom-orders

[@luxuryFirearmservices1911]

Yes, check out my website or email me at [e-mail] with questions.

[@luxuryFirearmservices1911]

@@pkbrowerstudiosllc5434 Thank you for the link.

[@Pyro17059]

how did you change the positive image to a negative image? about the 1:09-1:11 mark is where it changes on the slide

[@luxuryFirearmservices1911]

Select the whole image and use the combine function. Ctrl + K

[@heathholcomb9111]

What program are you using?

[@luxuryFirearmservices1911]

Inkscape and ezcad 3.

[@moeingh6673]

nice engraving bro . what was that liquied who used on papar?

[@luxuryFirearmservices1911]

Wd-40 to keep the paper from loading up

[@garynonaka]

1. I notice a fiber laser interacts with steel and changes colors. Are you able to stop at a certain color, and would that color be permanent? 2. I notice the laser changes the way it sweeps across the path of the design. Does it choose to change the way it sweeps across, or, do you need to program it to sweep a certain way to make it look uniform? Thank you.

[@luxuryFirearmservices1911]

Great observations! 1. Yes, you can do colors with a fiber laser. Different settings will give different colors/finishes. They are permanent but not super durable depending on the finish. 2. It’s called an auto rotate cross hatch. The laser sweeps across the design at opposing and different angles every time to give it a smooth and clean engraving.

[@garynonaka]

@@luxuryFirearmservices1911 Great explanations. What is the best method to prepare a 4610r steel slide, prior to laser engraving it? Thank you.

[@fyadposter]

I want this hobby / job

[@albertsanchez2027]

Do you do 1911 frames as well?

[@MrLucht]

What's the cost of this exact work? I want something similar done.

[@luxuryFirearmservices1911]

email me at [e-mail]

[@famtovar5385]

With the 150mm lasers, you can only do projects up to 6 inches? Or how would that work

[@luxuryFirearmservices1911]

The laserable area is determined by what size lens you have. So yes, if you have a lens that is 6x6 inches marking field you can only laser engrave a design 6x6 inches long in one run.

[@zachk7268]

I don’t do engraving but I want to learn the graphic design part. Do you do your graphic stuff in illustrator or is there a better program for the design stuff you are doing?

[@zachk7268]

I see your previous comment! Inkscape and ezcad3! Thank you so much…

[@santo9498]

Are you using EZCad2?

[@luxuryFirearmservices1911]

Ezcad 3

[@santo9498]

@@luxuryFirearmservices1911does your course go over gold plating. And nickel plating as well I might be interested what else does it offer besides listed.

[@jamesamous5854]

Do you have courses that teach people with lasers to do this? And is there any reason to go with a hot 60 over a jpt 50?

[@JuanPulido-nf6gg]

What are you clean up setting ? Speed , power , and frequency, and interval?

[@lpfdemt]

I also have a JPT 50, how do you, or what do you use in order to view the actual slide etc. you're engraving and overlay on the table for a live view? I am stumped. If I need to contact you for a paid consultation no problem. Just let me know the easiest way please. Your time and instructions are valuable. Do I email, Paypal, Venmo, etc.? Just needing a kick start to this part. Thank you so much.

[@SlickAvengerz]

a Amazing Work!

[@luxuryFirearmservices1911]

Thanks!

[@mathieubaker1548]

Quick question: Do you have only the parts shipped to you? or brought to you? thanks! I realize you have to have a FFL In order to keep parts with serial numbers over 24 hours, but I'm wondering how customers would actually ship their Firearm or firearm parts to you? thank you!

[@jakearchambault8160]

Where did you get thatsmall vice?

[@GunfuciusMMP]

What is that paper you attached to the table. And the liquid? Is it for polishing?

[@luxuryFirearmservices1911]

sandpaper and wd40

[@jbalo1]

How much do you charge for something like this?

[@teejay24k]

I have a video up on where to order your custom slides from him Where his websites are as well as prices for people sending slides in The video is called "24k Egyptian Glock 19 gen 3 slide" This Is The First Egyptian Glock

[@christopherharbour7281]

Beautiful work. What was that red thing you used with the dremel to polish? Thanks. Chris- new subscriber

[@GuiGuiYYDS]

Abrasive wheels

[@DavidMartinez-eb9xn]

Which laser machine are you using looks incredible

[@luxuryFirearmservices1911]

50w JPT

[@MrBigleo25]

where can i get that gig holder

[@pedrompj]

Magnífico ❤😮😮😮

[@bogdanpetrushko3425]

Very cool

[@josemendoza162]

Where is located I need a work like the

[@luxuryFirearmservices1911]

email me at [e-mail]

[@bigchaos818]

Where can I get the gun slide mini vice? Jig?

[@mauricemagiqceo]

Where do I need to send my 9mm and how much does it cost?

[@teejay24k]

I have a video up on where to order your custom slides from him Where his websites are as well as prices for people sending slides in The video is called "24k Egyptian Glock 19 gen 3 slide" This Is The First Egyptian Glock

[@mauricemagiqceo]

Thanks

[@teejay24k]

@@mauricemagiqceo no problem hope I helped 💪

[@andresudako323]

What kind of laser set up do you have? Interested in your course!

[@scottkeppler7251]

I've been trying to find a place near me to etc my SR1911 . I want you can have this gun when you pry it from my cold dead hands put on it.

[@teejay24k]

I have a video up on where to order your custom slides from him Where his websites are as well as prices for people sending slides in The video is called "24k Egyptian Glock 19 gen 3 slide" This Is The First Egyptian Glock

[@rudyvargas2846]

Which engraver is this? Been looking at some and unsure which one to get

[@luxuryFirearmservices1911]

Check out OMG laser he builds good lasers. I would reccomend a JPT as the laser source.

[@rudyvargas2846]

@@luxuryFirearmservices1911 Thanks for the info!

[@famtovar5385]

@@luxuryFirearmservices1911 you recommend JPT as a last resource? Or are they good?

[@luxuryFirearmservices1911]

@@famtovar5385 Yes, JPT is the best laser source unless you want to triple the price for an IPG or SPI source.

[@bluegizmo1983]

What's the wattage of the laser you used for this and what lens size? Like 30W and 110x110?

[@luxuryFirearmservices1911]

50w 150mm

[@scottyday5255]

DO YOU DO SLIDES WHAT WOULD A 1911 COLT COST

[@luxuryFirearmservices1911]

Send me an email. Check my about section on my YT channel.

[@nonxistnt19]

Looks good. A bit more of a reveal around the wording would make it even better. Looks a little congested around the "smith&wesson". Thanks for the video, great job.

[@luxuryFirearmservices1911]

Noted!

[@LePuntano22]

nice

[@ReportingEligiblePodcast]

If you need to use a Glock 17 gen 4 for more content, I might have one you can borrow (cough cough)

[@luxuryFirearmservices1911]

Ha!

[@peterraulrelenas6910]

Hm po sa slide ng 45, ty po

[@jesusleobardovidaltrujillo8219]

Presio d gtravado

[@ggomez4573]

LASER*** Engraving a custom 1911.

[@willirichter6816]

Ich möchte das auch gerne machen lassen bitte schicken Sie mir Ihre Nummer und Adresse

[@markcooper9063]

This is not high quality hand engraving

[@JakWhit-pk3cw]

You still mad Bro?

[@OzayMora]

Though I prefer hand engraving, the description does mentions it’s laser engraving.

[@OzayMora]

I take that back the laser engraving in this video is better and precise than hand engraving