BASICS ON LASER STIPPLING

www.litlaser.com
Ar 15 grip stippling overview when attempting to mark abs plastic having the correct laser system is very important as well as having the right settings, quality of the artwork will determine how well your stippling will come out.
Leave comments if you have any questions

[@ccfirearms]

Thank you for being a decent human being with this “im not selling settings crap” I am dialing in settings for all polymers to post everywhere just because of those a$&holes… keep up the good work buddy!

[@bamargera0123]

Let me know where you post it

[@RSB_Frank]

like the way u present, clean no music, not super fast talk easy to follow. thank ya !

[@johnnyrowlandsshootinshowa8360]

Very good information and thank you for sharing. i just purchased a 50W fiber and looking for a starting point. please keep the vids coming.

[@originalbabygeestak9819]

How much did it cost you and what brand is it brother im looking to get one as well

[@kevinmacias9081]

This is probably the GOAT video on laser stippling tutorials thank you so much man

[@exodeus7959]

Well, Jonny Quest is ready to maze-run that grip. Nice job. This helped a ton.

[@lanoka260]

This is dope! What Laser machine should I get if I am doing strictly Gun Grip Modules? Thank you in advance

[@ProfessorSteez]

This was an awesome video, I can’t find another out there like this. Is that software included with your laser setup? I’m a physics and software engineering student right now and just had a Glock stippled and it’s gotten my attention. How long did it take you to get good at stippling? I’m toying with the idea of doing a research project on building my own laser, programming it, and stippling something (that’s not a gun because “gun-free zones” 🙄). When you bought your laser, what brand did you settle on and what other brands were in the running? What’s the lowest powered laser that can effectively stipple? How long does it take to do a stipple job start->finish? Cool video, have fun lasering.

[@sgt4204]

I need that Damascus grip.

[@Mex_the_Fox]

I would love to have a step by step tutorial for getting the photo to a file on paper.... I suck at photo shop😭

[@45calshooter]

Could you a video that talks about how to use Mark Plan and Adv Param on a deep engraving. ( how to put cleaning passes on steel within the laysers).

[@missilpeludo8813]

Nice tips! Tks for sharing

[@dead_taz9408]

how am i supposed to follow what your doing? your moving at mach speed!

[@biagiocozza8875]

Nice

[@rycogunworks6169]

Thank you

[@bugsy74]

Damn bro make a course id totally buy it

[@rnrnrnm]

great video man! do u have a link to your laser?

[@BurtonDynamics]

What kind of laser fiber or co2?

[@daniellee3942]

Thank you for the good information.Do you use laser studio instead of easycad? I googled it, but I can't find any information about laser studio software. If laser studio has more advantages, I would like to buy laser studio. Which one do you recommend?

[@Nic1vip]

How do you make sure you have the proper scale after taking the picture?

[@finalaccuracy7695]

Love the video

[@mulletmining140]

I know this video was with a 20w but would a 50w or 100w do that job faster with as good of results? Or do you lose quality with the higher powered laser? Also, if I wanted to stipple the entire grip (all 4 sides) would I need a 3d machine or could this do it?

[@ProjectAnubisUSA]

Great information thanks

[@dae4441]

Good video. But its to fast i can not even see what you are clicking...

[@pablogoyaz9765]

Goat🐐

[@JakeCsekme]

great video, do you mind me asking what machine you are using?

[@litlaser626]

www.litlaser.com/laser-machines open desktop 20w fiber laser

[@JakeCsekme]

@@litlaser626 thank you, sent you guys a text and email about pricing

[@parabellumalpha]

​@litlaser626 hey what's the work area of the bed?

[@ryanvh7058]

Honestly i really can't understand how you did all that even with the help of the video so many steps are skipped and done so fast it's hard to keep up even at .25 speed and being new to PS and AI really doesn't help. i got to the point where i have the outline of my grip but i can't figure out how you get the vector of the pattern to merge with the outline of the grip please help.....

[@tjiron4705]

kzbin.info/www/bejne/rJqlq4hufdOgp80 this video is on how to merge layers in a.illustrator. I think that's what you need, I hope it helps

[@MT_Maniac406]

What laser do you use?

[@kcgunner8378]

Any other news videos you can post? These are a lil dated but good info bro!

[@jonbaldwin6987]

I have a 30w but can't figure out the settings to not burn it. Any help. Great video.

[@popsicle416]

I’m searching for the same answer, so please HMU if you get it!! I’ll do the same

[@Konsciiious]

what laser and software?

[@DangBruhY]

Where did you get the grips from?

[@VibeWaveTrends_]

What’s the machine that your using

[@CR4FTVR]

nice

[@Dntmesswittx713]

What’s a good laser to get to do this

[@WalterAllen-ob9zj]

What system are you using

[@TheyBroughtBackStupidHandles]

You said you use a 20w laser, is it a fiber or CO2 laser?

[@litlaser626]

Fiber laser

[@ponospur]

what laser did you use? can you provide a link? thank you

[@litlaser626]

www.litlaser.com this laser was a 20-watt fiber laser

[@jameslee522]

how many watts?

[@martinerdt7092]

Please. What lassr do you have?

[@litlaser626]

www.litlaser.com/products 20 watt desktop fiber laser

[@jonatantrujillo7254]

What’s the link for your laser ?

[@litlaser626]

www.litlaser.com/laser-machines

[@elliotserrano7333]

video corrupted?

[@chekered50]

I need a grip done who can get one done for me ???????

[@litlaser626]

email [e-mail] we can work something out

[@is300soon]

Fabio the owner is a crook, will not reply or stand behind his products.

[@archer7153]

What setting are you using??