Enhance your Gundam Builds with Gundam Marker Panel Lines! | Bandai Gunpla Basics

  Рет қаралды 27,686

Metro Hobbies

Metro Hobbies

Күн бұрын

Пікірлер
@coreyphillips6153
@coreyphillips6153 Жыл бұрын
New builder. Just did my third kit today. Thank you so much for the tutorial! Much appreciated!
@qban228
@qban228 2 жыл бұрын
Fantastic video ! Straight to the point - thank you for the video !!
@mdshfi3177
@mdshfi3177 Жыл бұрын
Do i need to do coating before panel lining ?
@DeanreyjamesAPONO
@DeanreyjamesAPONO 3 жыл бұрын
Is it alright to apply the pour type gundam markers directly to the kit with no top coat at all or what so ever? Like apply it directly to bare plastic?
@sven3390
@sven3390 2 жыл бұрын
From what I understand the pour type markers are sace on PS (polystyrene) plastic, but not ABS.
@TheHambo4
@TheHambo4 3 жыл бұрын
Good job Adam.
@jamescanete6544
@jamescanete6544 Жыл бұрын
Hi kinda new in gunpla building and i stumble upon panel lining, Anyways if i bought a tamiya panel liner, like the one you use in this video, can i use it the freshly bought tamiya panel liner as it is?
@ulrika8198
@ulrika8198 Жыл бұрын
You could, but Tamiya Panel Liner isn't very recommended on very thin crooks because it eats on the plastic and makes it brittle, so it could break the part of your Gundam. Top coating clear can protect the plastic before panel lining with Tamiya. Personally, I use Micron Sakura pens and Reaper MSP washes to panel line. I'm gonna buy and test the Gundam Marker pour type because it's easier and faster to panel line.
@Zeitgeist6
@Zeitgeist6 Жыл бұрын
Honestly I never used the eraser marker. Isopropyl alcohol and a cotton bud works just as well. Also for the Tamiya Panel liner. Also NEVER use Tamiya accent color or those Gundam flow type markers on unprimed/non-topcoated ABS plastic (check the runner or booklet to see if it is ABS). It'll shatter if you use too much. Ruined a few models (my poor HMM Liger Zoid 😭for example) like that before I found out what caused it. You can glue it back together but it still sucks.
@joaogomes9405
@joaogomes9405 2 ай бұрын
There's a reason why the marker says "do not use on ABS plastic" in big bold letters on the package
@Zeitgeist6
@Zeitgeist6 2 ай бұрын
@@joaogomes9405 Depends. My markers just have a big blurb of Japanese on them and I can't read Japanese. Besides who reads that (the instructions on markers I mean)?
@joaogomes9405
@joaogomes9405 2 ай бұрын
@@Zeitgeist6 It says in english, in big bold letters, "Do not used on ABS plastic, do not use on painted surfaces" on the plastic package the marker comes in.
@dingdongchingchong8659
@dingdongchingchong8659 7 ай бұрын
Never seen an aussie/new zealander white guy into in this gunpla hobby. Nice!
@demenoid13
@demenoid13 Жыл бұрын
at 5.35 which exact marker is that?
@joaogomes9405
@joaogomes9405 2 ай бұрын
GM302 grey pour tip marker. The black one is the GM301
@vidfreak727
@vidfreak727 Жыл бұрын
So this is what the real touch markers are for?
@DavidLopez-ep6tv
@DavidLopez-ep6tv 7 ай бұрын
i dont think those are real touch but rather pour type. real touch markers have white barrels and a marker tip on each end.
@Brodiesix
@Brodiesix 3 жыл бұрын
I was under the impression that panel liner should be applied after a gloss coat as to not make the plastic brittle? Excluding the markers.
@vcommandarv5916
@vcommandarv5916 2 жыл бұрын
Thats for ABS plastic
@joaogomes9405
@joaogomes9405 2 ай бұрын
Don't bother with the eraser marker. For the same price, you can get a big bottle of isopropyl alcohol, which does the same thing, lasts much longer and also has a ton of other uses.
@mjayson30
@mjayson30 Жыл бұрын
What happened to your thumb?
@omegacon4
@omegacon4 2 жыл бұрын
Panel lining is useful if you want to ruin a perfectly good gundam.
@bokbok1448
@bokbok1448 2 жыл бұрын
weakness disgust me
@omegacon4
@omegacon4 2 жыл бұрын
@@bokbok1448 Then stop looking in the mirror :)
@MrSuperalan99
@MrSuperalan99 Жыл бұрын
mad cause youre bad at it
@omegacon4
@omegacon4 Жыл бұрын
@@MrSuperalan99 Reported for immaturity and not having a life.
@robertrichards6964
@robertrichards6964 9 ай бұрын
lol what
@Josh-vh9fw
@Josh-vh9fw Жыл бұрын
Gundam markers are trash they make Ur gunpla brittle and snap almost instantly if Ur gonna paint and top coat u might as well use something better then these anyway
@MrSuperalan99
@MrSuperalan99 Жыл бұрын
its fine if u topcoat before
@Zeitgeist6
@Zeitgeist6 Жыл бұрын
Wrong. The flow type ones and Tamiya Accent color break ABS plastic if you haven't primed/topcoated it, but the normal fine liner ones work just fine on bare plastic.
@Josh-vh9fw
@Josh-vh9fw Жыл бұрын
@Zeitgeist6 how was it wrong then buddy u just elaborated on what I said u fool
@joaogomes9405
@joaogomes9405 2 ай бұрын
No they don't. Pour type markers can crack plastic, but only ABS plastic. They work perfectly fine on normal plastic, and the fine type markers work on all plastic with no issues.
HOW TO PANEL LINE GUNDAMS THE LAZY ARSE WAY - 2022 UPDATE
18:14
Mecha Gaikotsu
Рет қаралды 358 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
HOW to Panel Line a Gundam | TIPS for better Gunpla Panel Lining
10:38
Don Suratos Miniatures
Рет қаралды 106 М.
How to paint with Gundam Markers
2:53
I.R.O.
Рет қаралды 72 М.
Gunpla Tools - Watch This Before You Buy!
7:18
aMilla
Рет қаралды 240 М.
How to use Gundam Markers - Gunpla Tool Tutorial Series
11:02
Plamo Therapist
Рет қаралды 193 М.
TOP 5 NOOB MISTAKES ~ for Gunpla Builders!
10:07
ZakuAurelius
Рет қаралды 167 М.
HG, MG, RG, PG - Which Gunpla Grade is Best For You?
16:13
aMilla
Рет қаралды 1 МЛН
Panel Lining - Beginner Gunpla Tutorial
8:06
aMilla
Рет қаралды 344 М.
This Is My Most HATED Gundam Kit...  Or Is It?
22:09
Mecha Gaikotsu
Рет қаралды 54 М.
How to Panel Line Your Gunpla | Tutorial Tuesday
7:07
Studio G
Рет қаралды 473 М.