Enorossi Sickle Bar Mower with Kubota B2301

The Enorossi BFT 150h sickle bar mower. Another great attachment option you have for a Kubota compact tractor.
www.messicks.c...

[@Yota0824]

Hi Neil, can you do a comparison video between the B50 series & the B01 series? Preferably a B2650 vs B2601? I cant find a good video showing side by side comparison, and my local dealers don't have both in stock to compare. Thanks~

[@ianbob3050]

looks like thats only a five foot bar...Also on my tractor i have the auxiliary loader function for a grapple so i just teed the lines and ran a pair on hoses to the back for a rear set of remotes

[@Agislife1960]

If you consider that most small tractors will have front end loaders installed, one set of rear remotes really should be standard. Ive had experience with a tractor where I had to unhook the front end loader every time I wanted to put something on the three point, I'll never do that again.

[@alanskinner7031]

A tractor with no rear remotes! Wow.

[@thedozeroperatorman]

Six foot? So is that guy 7 foot tall? 😅 I'd say that's a 5 foot bar. Great video. Because that particular setup doesn't have a wobble box on it, you can use that sicklebar at a 90 or 45 deg angle. Great for trimming hedges or steep pond banks. I believe I will invest in one of these. I really like it

[@Karl427]

I have a L3200 and am looking to add hydraulics to the rear. What would be the cost difference to add remotes vs using my loader valve like shown here?

[@tsafa]

I can't really use a sickle bar, but the idea of using the loader hydraulic to run other attachments in the back is a great idea and I will keep that in mind.

[@brianlahmeyer]

He said relitively inexpensive for this attachment Rossi 6' Sickle bar mower $4,200 to $4,500 I find online , I guess so if compared to $25,000 attachment? but nice video! wish someone would post one on how to hook this thing up to a tractor that has 2 port rear hydrolics like on a B2650 etc....

[@MessicksEquip]

All tractors would have two ports. This is a single acting cylinder. One way is under power, the other drains to tank.

[@robertjanez7467]

ouch 4.5K for this sickle bar?!? Wow. My landpride rotocutter was approx 2.5K for my B2601. I was hoping the price point would be around 1K to 2.5K. high quality Italian company -> what do you expect. Looks like I'll be sticking with my manual scythes choping tall weeds to use as mulch for my fruit trees.

[@simpleman4196]

Good idea using the loader valve

[@solocontractingwv]

Could you do a video on how to attach and properly set up the mower?

[@turdferguson5300]

I like the simplicity of the sickle bar mower but it is not economical. I was interested so I called intending to buy one but the 59" was over $4,000. Compare that to the Titan 48-inch Offset Ditch Bank Flail Mower for $2,400.

[@TheodoreBARBOUR]

I'm considering an Enorossi to clip pasture fields. The online manual gives a 1-3/16" (3cm) minimum cutting height, and I assume that's using the lowest settings. I was wondering what the cutting height would be if you select the highest skid plate setting in under the bearings and highest sled setting out at the bar end.

[@eosjoe565]

Since you are using the bucket curl outlet how do you avoid having the bucket bleed down and hit the ground if mowing for a long time?

[@eosjoe565]

Yes, I understood that. But that is the boom. The bucket itself will still have a tendency to bleed down and work its way to the "dump" position over a period of time. I was just curious if that presented a problem or if they had a workaround.

[@MessicksEquip]

I'm not sure who you are responding to? Maybe there was another person who deleted a comment? all values will leak some, that's totally normal. There would be no functional difference here between a rear remote and loader valve. Given the low strain thats put on the cylinder on a mower like this, leak down would not be an issue.

[@eosjoe565]

Thanks. Yes, apparently the person who responded previously deleted their post. I was just wondering if the disconnected bucket would bleed down to the "dump" position while mowing and contact the ground and without the curl circuit hooked up you would have no way to raise it back up. Then again, maybe the Kubota hydraulics do not leak down that fast.

[@MessicksEquip]

I follow you. With the hoses disconnected, the cylinder can't really move as there is nowhere for the fluid to go.

[@eosjoe565]

I see. Cool. It's nice to see sickle bar mowers are still available. Back in the day that's about all anyone used to mow down fields.

[@bobknell7814]

Will this Sickle Bar Mower attach to a LandPride Quick Hitch (QH10)?

[@tomvet4411]

I see sickle bar mowers on heavier equipment that trim the edges of trees, are there any that do this that attach to regular tractors? Are there any sickle bar mowers for regular tractors that work in the upright position?

[@BeingMe23]

The lever direction is backwards. But the owner will decide what he likes

[@jamesfurlong7644]

We call them finger bar mowers not use anymore in Ireland

[@jeraldmcgowin4162]

I am interested in a sickle mower, and you mentioned that it was relatively inexpensive. I have a 25 hp Bobcat tractor and have been trying to find a sickle bar mower. What kind of figure are we looking at?

[@MessicksEquip]

Contact sales at 8002224373

[@Primerk5]

Is there a version of a sickle bar mower you could recommend for an older b7200.

[@jimg8218]

Will it fit and work on bx25d ? Cost ?

[@buntcher]

I am planning on buying the Kubota BX series tractor. Are there any jackhammer attachments for the BX series? I have a very rocky terrain in my garden and would like to do some landscaping. Thank you.

[@MessicksEquip]

I am sure it could be done, but I would discourage it. Hammers are very expensive and working it up on a BX won't be economical. You'd be much better off renting a powerful hammer for the periodic needs you may have for it.

[@darrinplank]

What would be a good attachment for a bx to do brush and scrub of approximately 1” thick trees? I rented a skid steer with a brush hog & it did ok but not down to the ground like we wanted

[@MessicksEquip]

If you want to get down to the ground, a Flail Mower would be best.

[@wildbill23c]

Could one of those sickle mowers be installed on a BX?

[@MessicksEquip]

Yes

[@Shane_O.5158]

can you get one to do hedges ?

[@JosiahGarber]

Ventrac makes one that does hedges.

[@aurelioguevara3815]

cuanto cuesta la segadora y donde la puedo comprar?

[@Sylmardal]

Could a B2650 handle a 7ft. bar?

[@MessicksEquip]

Yes

[@jackcrilly2861]

Can financing be an option for a sickle bar mower?

[@MessicksEquip]

Yes, but not subsidized 0%. Will have some interest attached.

[@triciahill216]

Would this mower in the 7’ or 9’ version be suitable for a large farm to clip pastures or is it more of a tool for small hobby farms?

[@MessicksEquip]

has been done that way for decades, but you'll find a disc mower well worth the money if you have significant acreage to do.

[@triciahill216]

@@MessicksEquip Which disc mower would you recommend for 50+ acres of pastures? We’d be using it with an old 38-HP tractor (a completely reconditioned Allis-Chalmers WD in excellent working order). Thank you very much for your help, Neil.

[@MessicksEquip]

@@triciahill216 Kubota DM1017 or DM1022 or New Holland HM.

[@j.h.2200]

How would this work with a belly mower. If you lower the mower to the correct height, the Rossi would lower also?

[@MessicksEquip]

Yes

[@paullambert2668]

You can pin the mower up though, if you wanted only the 3ph to move. Or take the mower off of course.

[@jacksonk5308]

We just received our machine with the exact same setup, except ours has a third function valve and it doesn't have the mower. I was wondering if I could run the mower lift and lower with the third function valve pump? I see an application for this kind of mower around my property. The reason I would like to do this is because I currently do not have any implements for the machine that need the third function valve and during the winter when I'll have my hydraulic angle plow, I won't even have this on, and I would like to have full control over the loader while mowing.

[@MessicksEquip]

+Jackson Krinke so what would this achieve?

[@jacksonk5308]

If having full control over my loader is what you're asking about, I would just like it handy in case I get stuck or there's an object in the way. I was just wondering if I could use my third function valve or if I would have to use the bucket curl if I didn't get a rear outlet for it.

[@paldeusjaco9657]

Hi Jackson. Yes you can use the 3rd function valve for this. I have a grapple that uses the 3rd function but when not using the grapple, I intend to use it for the sickle. I got mine from EverythingAttachments. There's a youtube channel "Paul and Kathy Short" Paul did a mod for the running of extra hydraulic hoses from the 3rd function to the rear to be used for whatever to use back there. This is on a BX. I own a BX. With using the 3rd function you can then continue to use the bucket as normal and (I assume yours has a 3rd function switch on the joy stick or similar) to use the sickle. For me having ability to use both is nice as my land isn't that well taken care of yet so the bucket along with the sickle will give me ability to block out brush or whatever the needs may be. You will still need hydraulic lines ran to the rear, if you don't already as Messick's had done in this video. I love the Messick's videos, wish they were closer to me, would be fun to visit them ;)

[@jacksonk5308]

Thanks, yes I watch Paul and Kathy too! Great videos. I didn't even think about applying that. Thanks for the idea, and you might have just pushed me towards a sickle mower!

[@fupelavacas3389]

how much?

[@cdarting91]

Why would a tractor with 3-point-hitch, or any hitch not have at least one remote?

[@MessicksEquip]

because maybe 1 in 100 people would use it, so its optional on most tractors. (that's not an exaggeration)

[@travelinthru9519]

No need on such a small tractor

[@railfanjames7699]

I know what type tires in are in the rear, bar turf

[@bduff007]

What kind of rear tires are those?

[@MessicksEquip]

+bduff007 bar/turfs. Only on this model.

[@aurelioguevara8405]

Messick Farm Equipment how much ?

[@MessicksEquip]

+Aurelio Guevara see our website

[@jhomrich89]

Messick Farm Equipment didn't know they still made those tires usually only see them on tractors from the 70s and 80s