Brill Hank, thanks! Just got my TS-10 after all these decades - excellent synth, very intuitive, great sequencer too! Ordered my SIMMs today off FleaBay ... let see!! 🖐😎🎹🎶👍🍻
@HankCoffey4 жыл бұрын
Awesome, sounds good man! Good luck with it. 🙂👍
@napotronix3 жыл бұрын
Thanks for these guides, I've just upgrade my TS-10 with a Gotek and 8MB Ram and it seems to be doing fine!
@HankCoffey3 жыл бұрын
Cool Nap! I actually bought a second TS-12 and did the same thing to it.
@LivermoreFilm3 жыл бұрын
Can you please direct me where i can buy this exact RAM? i have been looking but no avail
@napotronix3 жыл бұрын
@@LivermoreFilm unfortunately it wasn't the right type, it caused glitches which is apparently a known issue. Sold my TS-10 later. So unfortunately can't help you here.
@LivermoreFilm3 жыл бұрын
@@napotronix do you remember if the Gotek was an 8 chip SIMMS Ram? or was it a 4 or 2 chip?
@napotronix3 жыл бұрын
@@LivermoreFilm gotek is a floppy emulator and they are pretty universal. The RAM was 2 chips. It installed ok and it worked, but the samples would play with lots of glitches.
@scottknowles6744 Жыл бұрын
I am trying to make-out the part# and info on the RAM, but too out of focus...can you provide this information. only 2x4 shows for Ensoniq TS RAM
@HankCoffey Жыл бұрын
Garth at samplerzone.com/ has everything you need. Look under hardware/memory. Tell him Hank sent you.
@MeAlexSenna4 жыл бұрын
Great upload, when you say “Backup before upgrading the SRAM” Do you mean back up the whole system? Including settings and Original Sounds, I’m asking this because I don’t own those. Or just sounds in RAM memory from floppy disks we been working on? Thanks for the help
@HankCoffey4 жыл бұрын
Hey Alexandra! Just backup the USER banks and your Sequences, if any. The factory sounds will stay there after the reset. Your USER banks and sequences will be deleted after the reset. USER banks will filled with a duplicate of the 1st user banks. Just like a factory reset.
@MeAlexSenna4 жыл бұрын
Hank Coffey - Thanks for clarifying that. Works like a charm 😘
@ALANPEREIRA-ik2vr10 ай бұрын
Boa noite, tudo bem?. Tenho 1 TS 10, Fique um tempo sem ligar o teclado, agora quando fui ligar ele não calibra mais, sabe dizer que pode estar acontecendo?
@joseph3953 жыл бұрын
I know the asr/ts is compatible in many ways BUT is this 4x8 ram sold as ASR ram? All the ram I see listed strictly for the TS is only the 2x4 ram you said to avoid. I’m a TS newbie btw so forgive me if it’s a stupid question Lol
@HankCoffey Жыл бұрын
I'm just seeing this message, sorry. Garth at samplerzone.com/ has everything you need. Tell him Hank sent you. Look under hardware/memory
@irvin14211 Жыл бұрын
Podrías darme el enlace de donde compraste la memoria brohter?
@HankCoffey Жыл бұрын
Puedes comprar esta memoria en el sitio web de samplerzone. Google buscarlos.
@TheSplitzMusic Жыл бұрын
Hank, will I lose anything that might be stored in presets or is this for sequencer only?
@HankCoffey Жыл бұрын
The RAM is for sample memory. What's needed to load EPS and ASR instruments. I don't think you will lose anything by swapping the RAM. But I think it is recommended to do a factory reset after updating the RAM. A factory reset will clear your stored memory.
@HankCoffey Жыл бұрын
@@TheSplitzMusic SamplerZone. It's in the Hardware menu. Memory.
@LivermoreFilm5 ай бұрын
@hank if I load an ASR sample into the ram, will it stay in the memory or will it erase when I turn off the unit?
@HankCoffey5 ай бұрын
It will erase. The OS and any samples have to be loaded every time you power on. You can save sample banks and songs to disk, those can be loaded faster. kzbin.info/www/bejne/g4GwoZKFi7d3rJY
@LivermoreFilm5 ай бұрын
@@HankCoffey thank you my friend! I am specifically wanting to load the ASR's sampled piano titled "Westlake Piano" abbriviated as "WESTLAKE PNO". Wanting to load that into my TS-10. I was really wanting to save it on a 3.5 but i was told by another that because it is 11 MB big, near impossible to be able to load it as 3.5 floppy will most likely need to go the SCSI route and load it either CD or Zip. Unless you have any other suggestions on how i would do this?
@HankCoffey5 ай бұрын
I run external SCSI2SD on TS series because it is read only, and use a Gotek in the floppy slot. On Kurzweil and ASR I just install SCSI2SD in the floppy slot. I don't mess with my hardware much anymore kzbin.info/www/bejne/bqXRooGuer-Ifck
@LivermoreFilm5 ай бұрын
@@HankCoffey Thank you Mr. Coffee!
@ALANPEREIRA-ik2vr10 ай бұрын
Good evening, how are you? I have a TS 10, I didn't turn on the keyboard for a while, now when I turn it on it no longer calibrates, can you help with this issue?
@HankCoffey10 ай бұрын
So it says Calibration Failed? Do any keys work when you exit out of that prompt?
@ALANPEREIRA-ik2vr10 ай бұрын
@@HankCoffey No, all keys locked, none work!!
@HankCoffey10 ай бұрын
@@ALANPEREIRA-ik2vr does it say Calibration Failed? These have 7 or 8 fuses that can blow, I recommend checking them, there isn't much else I can help with. I don't use my hardware keyboards much anymore. And I am not a tech.
@ALANPEREIRA-ik2vr9 ай бұрын
@@HankCoffey OK, thank you very much, I'll check it out.
@ricardomoura87463 жыл бұрын
what's the link for buy this?
@HankCoffey3 жыл бұрын
It's becoming hard to find. They are 8-chip 30 pin Simms. 4mb per simm. Non Parity RAM. Memory Masters has some on eBay. There are some used listings as well.
@tech2callАй бұрын
Need help. Receiving file too large
@HankCoffeyАй бұрын
If you mean sample data, you probably don't have enough RAM installed. You can upgrade a TS to 8mb.
@tech2callАй бұрын
@@HankCoffeyyeah, I want to load bigger sequences. It keep receiving file to large.