Eonini Socket Fan Light | Screw in Socket Fan Light with Remote

[@000makeyourmark000]

My fan runs clockwise and creates an updraft. No noticeable breeze even an inch below the fan blades. Is there a forward reverse function on the fan? On a typical fan id flip the blades over but it's not an option here with the molded plastic click on blades. Thanks in advance.

[@luisperalta1358]

Can you snap out the fan blades? In case you need to put it back in the box for shipping.

[@skinners100honestreviews3]

I would be very careful. I have read comments where people have removed the blades but you have to do so very carefully so you don't bend or break them.

[@RonnyBell-dm8qe]

Is there anyway to turn off the loud beep when starting the fan?

[@skinners100honestreviews3]

I don't think so...

[@Parakeetplaysadoptme]

That’s your main concern about it……

[@RonnyBell-dm8qe]

@@Parakeetplaysadoptme yea it’s really loud and happens when you start the fan and adjust the speed. It’s damn near a smoke alarm test in person. My dog doesn’t like it and at night it’s enough to wake neighbors upstairs. It’s a nice fan but it’s such a huge oversight on their part. There’s absolutely no reason for it and to not be able to disable it is asinine.

[@kristi.kervin]

@@RonnyBell-dm8qe absolutely agree with you!!! i have a rescue dog who is terrified of smoke alarm type beeps. the turned the fan on he started shaking, ran downstairs hid under the dining table and had a seizure. it took 5 hours to coax him back upstairs. don't let a dense as hell ""parakeet" make you feel weird.

[@elissanova]

Hi, any idea if this would work in a swag light?

[@skinners100honestreviews3]

I don't think so, the rotation of the blades would most like cause the swag to sway. I think you'd get best results in a fixed socket

[@susanmcgalliard7885]

Any idea why my remote stopped working , haven’t even had it a mouth yet , you push the the button and the red light comes on but will not turn light or fan on

[@skinners100honestreviews3]

I'm really not sure without being there but I'd first suggest making sure your light switch is on. Next I would pull the batteries from the remote and see if that resets it. Next I would remove the fan from the socket and see if that resets it. If there is no change then maybe you have a defective remote that needs replaced

[@susanmcgalliard7885]

@@skinners100honestreviews3 thanks for the reply but guess with the fan running it must of loosened up , all I had to do was tighten it back up , thanks again

[@benedictocarpio9861]

Is this better than the Bell & Howell fanlight?

[@skinners100honestreviews3]

I've not used the BH fanlight so I can't answer that question accurately