EP:21 Weiser Technik EXT-Run-on Module BMW GS/A LED Tail Light Reactivation - How to turn it back on

[@Michael-o8f6l]

Hello Carl, answer from Weiser I’m pleased to be able to tell you we have now produced the module we discussed I have had them working successfully on my bike now for the past three weeks . We have shown the bike to three BMW dealers in the UK and they are very excited about the results . The kit will be totally plug and play and should take about 30 mins ti fit on a GS & a bit linker on a GSA because of removing the pannier frame too. I will prepare some video for you shortly .

[@justthewayitis]

Hello, I was in the factory two weeks ago and saw the new modules installed. Once a production version is available I will have one to test and then make a introduction video about them. Install time on a GS is less than 5 mins 😉

[@Stormingsoul]

What does the module you mention exactly do? It is a other one than the video talks about i guess?

[@justthewayitis]

Hi Eric The new product is not yet available a full video review will be released soon. Best wishes Carl

[@Stormingsoul]

I'll be waiting!! Very curious Hopefully this is a module that dims the brake light when the Blinker is on with the multifunctions 😁. I had this briljant guy in Poland on eBay who made these homemade soldered chipboards for my previous motorcycle (tracer 900 GT) which had the same style led Blinker/tail/brake lights that disabled the brake or tail light when using the Blinker. Genious piece of work, just install it infront of each Blinker and magic! Too bad the guy went offline and untracable and couldnt help me for the bmw 😢

[@contentofcharacter]

Thanks for the discount code information Carl! I just bought the complete kit for my 1250 GSA🙏

[@justthewayitis]

You are very welcome 🙏, it will look great in your GSA 👍. Have fun with your installation Best wishes Carl

[@tony182bikes]

Hello Carl. I just had the brake light module fitted on my R1250GS bike (exactly the same bike as yours in colour, year etc etc). Mark & Phil from Weisertech carried out the work for me and now with my Weisertech indicators as well, my bike stands out more than any other BMW I’ve seen of late … apart from yours! Thanks for Introducing me to these products and keep up the good work in the future! 10/10 👌👏👏👏👍

[@justthewayitis]

Hi Tony good morning and thank you 🙏. The Weiser-Tech products and the whole team are great 👍 and extremely helpful, and offer a beyond 5* customer service. If only all companies operated like this. I have had so many subscribers messaging me about the great service they receive and how happy they are with the upgrade in lighting performance. Have a great Sunday Carl

[@JaySalvoUK]

Cheers for highlighting these. Received mine yesterday and fitted last night. Takes minutes to fit and makes for a terrifically bright rear end.👍😁

[@justthewayitis]

Hi Jay 👍 great news glad you found it easy to fit, I’ve got an installation video going up later today, but most owners like you probably don’t need to watch it Best wishes Carl

[@Simon-fm8yc]

Wouldn't have even been aware of this, if i hadn't seen this video. Glad i did and am waiting for mine to arrive and will follow your install video. Cheers

[@justthewayitis]

Hi Simon, thank you 🙏 have fun with your installation Best wishes Carl

[@maxkunzke8995]

Great video as always Carl. I already installed the Weiser indicators and will install this also. Many thanks and safe riding.

[@justthewayitis]

Hi Max, good morning and thank you for your feedback 👍, have fun weekend on your bike Carl

[@stanj3708]

Once again, another excellent video! Thank you!!

[@justthewayitis]

Hi Stan, good morning Thank you 🙏 Carl

[@slipthegreyhound]

Thanks for the heads up. Going to purchase one now. It’s one of my pet hates on the 2022 models, the way that BMW have the rear lights set up. The older set up was far superior, as far as being seen and making turn signals nice and clear.

[@justthewayitis]

I totally agree the earlier version was much better than the current OEM setup. Install guide will be up next Wednesday/ Thursday for this new module but it’s really easy to install. Best wishes Carl

[@nigehaworth]

@@justthewayitis Wthe combination of Weiser indicators and now this tail light we have all that’s needed but we’re spending £500+ to correct a bad design idea from BMW, they clearly put “form before function”, in art and design that might be OK, but for a motorcyclist’s safety it’s really unforgivable.

[@justthewayitis]

Yes, but it’s going to get worse on the new GS I think 🤔

[@Simon-fm8yc]

Another well described video and easy to understand. Goid one. Just need to sell my Multistrada and buy a GSA in time for my September tour .

[@justthewayitis]

Hi Simon, sounds like you have a nice plan for your September tour. I do miss my Multistrada its the best handling bike I've owned, but the GS is just a better all round bike for the type and mix of riding i do. Best Wishes Carl

[@Simon-fm8yc]

@@justthewayitis It's a great bike Carl. I do over 3k mike tours and came round to the idea of having a 30l tank and new safety and rider aids will be better suited to me.

[@Bobby-qn9yn]

Thanks for this,just yesterday taken delivery of a gsa1250 TE triple black and going from a 2006 honda to this is something else,i was having a play about with the bike in the garage and was wondering what was going on with the tail light but you have answered that question now,subsrcibed so will see what else you have put up,many thanks and keep up the great work 👍

[@justthewayitis]

Hi Bobby and welcome to the channel and congratulations on your new GSA. Glad you are enjoying the series. Lots to learn on your new bike… have fun Best wishes Carl

[@nigehaworth]

Looks great Carl, I was talking to Mark at Weiser last week and he informed me this product was ready for launch, if I hadn’t already fitted a Denali B6 brake light ( also excellent and similar price), I would have opted for this. But installing both as well as Weiser indicators is probably a step too far for me! Thanks for another great video, look forward to the install.

[@justthewayitis]

Hi Nigel good evening, it’s an interesting point you raise about the B6 it might be to much like you say. I’m almost finished with editing the installation guide so it will go up next week. Have a great weekend Carl

[@simonstaley1866]

Brill video and advice again Carl 👍👍

[@justthewayitis]

Hello Simon, thank-you....Carl

[@marcfalardeau6058]

Hi Carl, although I am not concerned with this episode ( I live in Quebec, Canada) it was as usual very interesting. Thanks for your precise info & diligent work! Marc 😉🏍

[@justthewayitis]

Hi Marc, thank you 👍🙋🏻‍♂️ Have a great weekend Carl

[@jonaspersson6135]

Tack you for a excellent video❤when I have seen your video shall I by this kit,much better an original, thank you for a good video 😊you should be a teacher 😊❤ Thank you and bye from sweden 😊

[@justthewayitis]

Hi Jonas, du är mycket välkommen. vänliga hälsningar Carl 👍

[@robwojcik9224]

Thanks Carl, will await the next install guide. On another note, ever thought about doing a video about coding, I'm currently looking at options for getting the sports displays configured.

[@justthewayitis]

Hi Rob, that's very interesting as I too have been thinking about getting the "Sports" screen installed, but from what I have been able to find out their is a problem, and that's when the bike goes in for a software update at the BMW dealership it overwrites the installed sports screen. There is a company ( two brothers I believe ) here in Germany that can do this for a lot of BMW bikes.... but when you have a service and an update the "Sports Screen" is then gone. It would be great if you could let me know what you do and if you find something that works.... as i would install it straightaway if it remained for longer than 1 year. Please let me know Regards Carl

[@robwojcik9224]

@@justthewayitis who's the company in Germany, please?

[@justthewayitis]

Www.rs2e.de It’s In German but right click on the page and Google will translate to English it’s within the bmw services section at the bottom Carl

[@justthewayitis]

www.rs2e.de/leistungen-preise/katalog-bmw-motorrad

[@surfingpasty]

I have to admit not really paying too much attention since having my GSA to the rear lights function. However, after now checking, it seems crazy having a light that doesn't have run lights and I like to have as much illumination as possible, so will go and order one. Look forward to your next installation video, thanks

[@justthewayitis]

Hi Jason, good morning the installation guide will be up next week, but it’s really very simple to install. Thank you for sharing your thoughts Best wishes Carl

[@surfingpasty]

@@justthewayitis I've pre-ordered the run on module, so look forward to when it arrives. I went out today on an invitation ride with BMW, following a new GS noticed how the indicators are not really visible, especially during braking. Might have to look into changing these with the Weiser Tech ones as you mentioned. Great info you provide, many thanks

[@justthewayitis]

Hi Jason, that’s the thing… we never really see the back of our own bikes in terms of indicators and lights, it’s only when you follow one you realise how poor they are. Enjoy your Saturday Carl

[@martinevans6289]

Another great episode, Carl. I really struggle to understand the BMW's design team end-goal for effectively removing the main/centre tail-light. Then (I assume) the final design had to pass BMW's safety team/department, let alone type approval testing (or equivalent) for each country in which these new bikes would be sold. For me (and I guess many others), the tail-light is a reference point if you will. When I'm following another bike, it's the centre point, the position light; when I then see an orange indicator flash to one side or the other of that centre point (tail-light), I'm left in no doubt where that bike is telling me he/she is going. With centre point/tail-light, is it really going to be as obvious? I'm not sure ... Well done to Weiser Technik for producing a solution (that should've never really been needed).

[@justthewayitis]

Hi Martin, thank you 🙏. Quite a few of the new bikes don’t have a central rear light which is not great, i think it’s because Radar will become standard on many new bikes and models over the next few years so they need somewhere to mount it on the rear . When Weiser-Tech came to my home last year to talk about the products and technology they asked is there anything I wanted them to make… and this module was it, so I’m pleased they found a solution. Best wishes Carl

[@nikoscosmos]

Hi Carl, another clear and informative video and another quality product from Weisertechnik. I personally prefer not to have the rear indicators as running lamps but rather as brake lamps only (plus indicators)as in my mind that increases the conspicuity of brake lights on. This is the way my 2019 GSA is wired. It's a bit mysterious why BMW are deleting back lights!

[@justthewayitis]

Hi Nick Thankyou 👍 I think bmw are preparing us for no rear light assembly on the new GS1300. Best wishes Carl

[@robwojcik9224]

The cynic in me says bean counters have got involved.

[@justthewayitis]

LOL quite possibly...

[@nikoscosmos]

@@robwojcik9224 bulb counters!!

[@robwojcik9224]

@@nikoscosmos LOL

[@johnnycigarettes3325]

A product that reduces safety. The whole reason there is a big.light in the middle that is usually off is so that when the rider brakes that big light draws attention. A brake light is a far more important light than a tail light. I also think the OEM multi function indicator set up is great

[@justthewayitis]

Hi Johnny, all comments welcome thank you for sharing your thoughts. Carl

[@snypher007]

I might agree with the drawing attention when rider brakes. The multifunction should be a safety concern as, when using the blinker at night and braking, it can be barely seen from behind though...

[@justthewayitis]

That’s why many gs owners have installed the full weiser kit front and rear. Carl

[@danielwolthuis115]

I am not sure if the taillight used as a dlr is an advantage. I do think that the Weiser indicators contribute to more safety and visibility. (Break)lights and indicators at the same time is so bad.

[@justthewayitis]

Well it might not be for everyone, I asked for this in August so I’m actually really pleased with the new product. All comments and thoughts welcome as usual , thank you 🤞 Have a great weekend Carl

[@danielwolthuis115]

@@justthewayitis I really like your videos!

[@justthewayitis]

Thank you 🙏

[@jamescurrie1285]

Carl would your Brembo brake pad up grade options be the same for a KTM 1290 Adventures

[@justthewayitis]

Hi James, yes but remember the SC and SR need to get really hot to perform at their best, so you might be better for on the road going for the SA Check the part numbers for your year model Carl

[@jamescurrie1285]

@@justthewayitis yes I fitted the SAs to my GS Adv with a very good improvement Thanks for the reply

[@justthewayitis]

No problem 🤞

[@dannyd.8753]

Is it allowed to have 3 tail lights in germany? I think it might not be allowed this way. If you use the middle light as tail and break light (like before models) you have to remove the drl function from the indicators so it is only one center tail light.

[@justthewayitis]

Hi Danny, that’s a great question I just don’t know the answer, do you know where I could find the rules and regulations for this ? Thank you 🙏 Carl

[@justthewayitis]

Hallo Danny, wenn du weißt, wo ich die Motorradgesetze finden kann, lass es mich wissen, damit ich das recherchieren kann. im Moment bin ich unsicher. aber es ist eine gute Frage

[@dannyd.8753]

@@justthewayitis Hello Carl, it must be anywhere in the StVO (Straßenverkehrsordnung). I searched the web and found at Dekra : [Ein Rückstrahler hinten ist Pflicht, zwei sind erlaubt.] and [Anzahl Schlussleuchten: 1 oder 2, mittig zur Fahrzeugachse montiert]. In english: 1 tail light is a must have, two are allowed. To be 100% sure you can only ask a Dekra or TÜV Engineer as he must know the latest changes of the law. If you search the web it is not 100% sure that it is the latest information. I have a 1250RS which had no side markers from factory. There was a guy here in germany that supplied a PCB and cables to give the "older" bikes the look of the new 1250GS. One of the steps was to deactivate the tail light function. I made it by my own without his kit and disconnected the tail light pin (and fit a resistor to it to let the controller know everything is OK for the self test). It would have been much easier with just adding the side markers so I think he deactivated the tail light for a reason (make it legal). I have made all light functions exactly like on the new GS (using a Hex ezCan, a termination resistor and original new design LED Indicators from BMW) because this must be legal this way. I sent you an email with a document. Perhaps this helps....

[@justthewayitis]

Hi Danny, big thank you 🙏 I’ll reply via email later Carl ✌️🙋🏻‍♂️

[@2BoldlyGo]

Thanks Carl for another first class video , I'm very pleased with the Weiser teck indicators & had a lot of interest from other Gs owners, do you know if spare lens are available ?

[@justthewayitis]

Hello!! Good morning and thank you 🙏 yes spare lenses are available from Weiser-Tech in both clear and light tinted version, either ring Mark on the hotline and he will take your order or I believe you can order them on the website Best wishes Carl

[@2BoldlyGo]

@@justthewayitis Thank you Carl, will we see you at the ABR ??

[@justthewayitis]

Hi sadly I’m not at the ABR but Mark and the Weiser-Tech team will be there. Possibly next year I’ll be there. Carl

[@2BoldlyGo]

@@justthewayitis ok look forward to that

[@timspivey9809]

Any discount code this time Carl?

[@justthewayitis]

Hello Tim, go to my channel then watch episode 13, at the end of the video are the steps for requesting a discount code. Which you can still use for these modules What bike are you fitting them too Tim ? Carl

[@timspivey9809]

2021 R1250GS, I replaced the standard multifunction set up with the EVO last year after watching your videos. Extremely happy with them, used the discount code then. Tim

[@timspivey9809]

Apologies Carl, I didn’t run to the end of the video to see your bit regarding the discount.

[@justthewayitis]

No problem 🙋🏻‍♂️

[@snypher007]

It would be nice if the function of lights on/lights off could be done in the OEM blinkers, both light and blinker would turn on and off... Is it possible with the module?

[@justthewayitis]

Hello, the only function of the module is as shown, but there is a new product due to be released in August that I will have a review on…. That you might like 👍

[@snypher007]

@@justthewayitis don't tell me: center light on and brake, side lights on and when using as blinkers they'll go off and on... So it would be almost the same as the previously model... That would be something nice 👌

[@justthewayitis]

Exactly… if was shown the prototype unit on a test vehicle this week, a production version will be with me in a week or two to test on my bike, then I’ll put a video up once that’s finished and they have stock. It’s a clever solution 👍

[@Michael-o8f6l]

Hello Carl got the answer to my question today .... the idea is feasible and will reply soon

[@justthewayitis]

Look forward to it 👌

[@MV-XD2]

Apologies if you’ve mentioned it and I’ve missed it, but if you install the Weiser Technik multi function indicators does that also restore the tail light function or is this module required as an additional purchase?

[@justthewayitis]

Hi, this is an additional module but I think Weiser offer it in a complete package with the multifunction indicators so you get a little more discount/value for your order. Carl

[@Michael-o8f6l]

Hello Karl unfortunately not my expectation A module for the original multifunction indicators would be ideal, rear light is switched on when flashing, the function of the brake light in the indicator is switched off and the indicator can therefore be optimally perceived

[@justthewayitis]

You could send your idea to Weiser-Tech maybe they could have a look Carl

[@xjr13john]

It's ridiculous that you need to do this, I really don't understand what BMW were thinking and am thankful that my rear light functions as a rear light!!

[@justthewayitis]

Indeed, strange choice they made. Regards Carl

[@raystewart365]

Hi Carl, would fitting the module or any of the other Weiser products the warranty ?

[@raystewart365]

Affect

[@justthewayitis]

Hi Ray, most things we fit to our bikes affect warranty in one way or another. I recently found out that adding stickers to a motorbike can affect insurance (UK Policy supplier) which was a complete shock !!! My understanding from my local dealer is as follows: If I install 3rd party lights then the lights are no longer covered by the warranty as they are no longer OEM parts..... which seems reasonable to me. The same applies if I install a different screen or seat or foot pegs. But, Because this module does not require any cutting or modifying of the original BMW system (basically it attaches to it) my understanding is that it does not affect the whole bike warranty. However, If ( as i have) I install the Weiser indicators then i have removed an original part and fitted an aftermarket part... so in this case I affected the warranty of the lights. I hope my reply make sense.... this is just my understanding of course, and i would always recommend you ask your suppling dealership. Just be aware that they seem to say different things to different customers !!! Carl

[@raystewart365]

Cheers Carl, yes makes sense, thanks.

[@paulpickering4024]

Why is it 79.99 on here and it was 237.00 at ABR fest 2024😮

[@justthewayitis]

Hi Paul, the the first price you mention is only the Tail Light reactivation wizard module. The second price is the full kit of 3 wizard modules ( tail light reactivation plus both rear indicators modules. Greetings Carl 👍

[@olatillberg6894]

Hi. I see in the comments somethong about this product is functioning together with the DRL. Do the ”new” taillight switch on and off together with that when installing this?

[@justthewayitis]

Hi Ola, good morning Sorry I don’t understand your question Can you ask again using different words ? The module can be installed by itself on a standard gs/a Or it can be installed on gs/a that already has Weiser-Tech indicators installed. The switch I mentioned in the video is inside the indicators please watch episode 13 for a full explanation Carl

[@olatillberg6894]

@@justthewayitis Hi again. Sorry for the unclear question…english is not my native language… I have a -21 GSA and I run my lights in auto mode. What I meant was, does this product turn on/off the rear center lights along with the bikes auto frontlight mode (like when you enter a tunnel) or is the ”new” rear lights on constantly?

[@justthewayitis]

Hi Ola, correct the new module keeps the rear tail light on all the time ✌️

[@correykeen2956]

This one is a tough decision. I get why BMW got rid of the marker light function from the tail light. A light that suddenly appears where there wasn't a light is more likely going to grab a drivers attention than say a light that was there but just got brighter. The turn signals provide that marker light function instead, poorly for the OEM lights. I get the flipside of it as well, less light to let a driver know you're in front of them when barreling down the road. I'm all for anything that will make me more visible at any given time, so I'll probably get this. That's why I have a brake free on my helmet and changed my turn signals to Weiser Tech. What I don't understand is BMW getting rid of the tail light all together, that's a stupid move in my opinion. The only reason I can see doing something like that is for aesthetics, which should never come before safety. What does removing an essential light provide? Weight savings are nonconsequential, there's no additional horsepower or torque gain, these are LED lights so it's not really removing any strain from the electrical system. It's baffling...though it does give Weiser Tech new products to produce to fix BMW's mistakes.

[@justthewayitis]

Hi Correy thanks for your feedback… and it’s a similar thought process to me. On one hand the impact of a single big brake light is welcome, but with the Weiser indicators now doing this better than the OEM ones I find myself missing that extra central light especially early mornings and late afternoons. Many of us don’t understand why bmw is removing the rear taillight unit, but a bigger question is why are they being Allowed to do this by the DOT and European lighting laws. Have a great weekend Carl

[@justthewayitis]

Hi Correy, I think you might have a tail light illuminated inside your light assembly already? Can you check and let me know please when you have a spare moment. I thought that all North American specification bikes still had It. Carl

[@correykeen2956]

@@justthewayitis I'm in Japan and have one of the rest of the world bikes 😄

[@justthewayitis]

Ah, ok 👌👍 then this will work brilliantly for you , Carl

[@morningdew9450]

shame, if you install this in Europe, you loose the homologation.

[@bsidethecside2283]

Well done the US DOT for not approving them. They're hopeless when braking and indicating - the amber is all but invisible.

[@justthewayitis]

Totally agree ✌️

[@sunnycloudy1337]

good and informative video, but the bike now lights up like a Christmas tree, or an old model honda goldwing 😂 no thx

[@justthewayitis]

lol 🤔 yes maybe you are right. I remember those old Goldwings…. Carl

[@herrdirektor1969]

I own a r1200gsa. Find it utterly stupid what bmw did. US has the correct policy. Only turn indicators is dangerous during braking and turning at the same time.

[@justthewayitis]

Totally agree 🙋🏻‍♂️👍🙏

[@eggertakerlie7320]

Just over 500 euros for a complete set minus discount, plus VAT into Norway 🫣

[@justthewayitis]

Yes they are not cheap. Greetings to Norway 🇳🇴 Carl