Рет қаралды 1,418
The moment we all have been waiting for is here (for me at least hahaha): THE 2ZZ was successfully swapped into the MR2 Spyder (zzw30) chassis!!! Its a successful engine transplant! Let me show you step by step how I did it! I hope you enjoy this video, this is the result of months of efforts that has gone into it! Enjoy! Add me on Insta: @jesse_yaroo
My Instagram: / jesse_yaroo
Finally! The 2zz-ge engine swap (engine transplant) and replacement of the 1zz was successfully done and installed into the Toyota Mr2 Spyder (Mr-S) zzw30 chassis! I am freaking thrilled about this! Take a look at the video and tell me what you think about it in the comments.
By Watching this video, you will have a full step by step Process on how to do an engine swap of a 2ZZ engine into a Toyota Mr2 Spyder (zzw30 chassis).
This is part 2 of the swap video with lots of details and over 15 minutes of footage!
I also finally got my hands on some new Camera Gear. A Canon M50, Lenses and a Good Microphone! I am also using a new editing software (Final Cut Pro X), there should be some improvements and I gave color grading a shot. Tell me what you think!
Enjoy!!!
Step by Step Process:
Prior to install, make sure to assemble Engine, transmission and subframe.
(Also, I highly recommend you watch part 1: • EP10 Project Lotus Hun... )
1:28 Lower car onto your Power plant assembly (or the other way around, lift your engine/transmission into the chassis)
2:41 Preventive measure, remove swap engine bracket to make it easier to align everything
3:09 When everything is aligned perfectly, Reinstall swap bracket on engine side
3:40 Install Screw holding swap bracket to engine mount on the Chassis side
4:50 Fasten upper transmission mount to chassis (1 bolt)
6:34 Install 4 bolts holding subframe into the chassis
7:10 VICTORY! Its in!
7:41 Air conditioning install (hoses) 100% Plug and play
8:49 Install cooling hoses (pain in the butt)
9:12 Reinstall 1zz Injection Rail (that was already fixed to the Mr2 Body)
9:45 Pull Engine loom through the firewall
10:34 Provisory Accelerator cable install
11:00 ECU Plugin
12:25 Fill in oil
13:18 Unplug Injectors in order to avoid fuel being injected when building up oil pressure
13:38 Crank engine to build oil pressure until light goes off, this will also build up the fuel pressure
14:06 Reinstall fuel injector plugs
14:21 Crank the engine and start
Thats it for Part 2! Thanks for watching!
My recommandation:
Watch the the whole playlist of this project to fully grasp what and why I am doing it!
My Mr2 Project:
• Project Car: Toyota Mr...
How to Swap a 2ZZ Tutorial Playlist:
• How to Swap a 2ZZ - GE...
Make sure to subscribe if you want to see the next steps of the Mr2 Build!
#toyota #mr2 #zzw30 #1zz #2zz #2zzge #engineswap #swap