Hello :) Did you dyno test to see if there were any gains made with the Greddy Panel Filter?
@JesseSpec3 күн бұрын
@@DonsShed Hi, if I’m not mistaken, there was 5hp
@DonsShed3 күн бұрын
@@JesseSpec so more HP gain than the MST Intake LOL.... for context, I'm an MST fanboi, as I have one in my M340i (which I'm considering selling to get a GR Yaris or GR Corolla)
@JesseSpec2 күн бұрын
@@DonsShed not really. It was 5hp on 100% stock car. If the exhaust already creates so much gains that you hit the max the oem ecu is willing to hit, then you will peobably not see any gain, whatever the intake you use
@DonsShed2 күн бұрын
@@JesseSpec ahhhh, ok, that makes sense.👍
@DonsShed3 күн бұрын
Great video mate :) thank you :) Cheers Don, Perth WA (Dons Shed and Xplor Overland)....... p.s. I think the 18 x 9 is the sweet spot
@JesseSpec3 күн бұрын
@@DonsShed thanks man! For street use, the more time passes, I tend to agree with you. I am running the 9.5s 🥶👌🏼
@jefferymartellini86648 күн бұрын
Where did you run the wires for the center gauges?
@keystoadventure881621 күн бұрын
My 2zz got sold and k20 is going in. Few reasons personally Oil starvation if tracked so need an oil pan Oil pump gears shatter if sustained rpm like track, so needs new gears Lift bolts are a CONSTANT maintenance item I had it for 3 years and it was fun when it worked but, I sold my swap for roughly the same price as my k20a2 swap has cost so far, and the gains are quite large on paper
@JesseSpec16 күн бұрын
Hi, thanks for your input. You may have seen it in my other video but I exploded a 2zz in a time attack race. So thats why I changed. I hand new lift bolts and a new oil pump in, so they help… Yes its a bit of a oil starvation problem under very hard cornering. I had only the 1zz pan and probably was barely full of oil. Didn’t over fil so that could have been my mistakes. In the end I enjoy swapping motors with new stuff. So thats why I did it. It was waaaay more expensive. No doubt. The donor car cost easly twice the price
@keystoadventure881616 күн бұрын
@@JesseSpec I just got the last piece of the swap, and dollar for dollar I broke even from what I sold my 2zz setup for and I ended up with so far- K20a2 with a harness and random intake PLM Ramhorn headers Innovative mounts Link g4x plug and play Map harness with odb2/AC MAP ac bracket Frankenstein motorworks Junction box
@timwattison441923 күн бұрын
Why not use 9x19 ? the standard curcuit pack wheels look bigger due to the spokes going out to the edge of the wheel, these Wedssports make the wheels look smaller 😮 19s should be the way to go 😊
@JesseSpec21 күн бұрын
Hi, thanks for your comment. It may look good to some, but we want to go fast, so 19inch is not the right size for the GR Yaris (reminder:homologation rally car)
@tahayt639825 күн бұрын
Whats the paint code
@JesseSpec25 күн бұрын
@@tahayt6398 its custom. No paint code
@scootinhootin6928Ай бұрын
1jz, and any inline 6 is cool. But v8 is creme de la creme
@JesseSpecАй бұрын
Hahaha thanks for the comment! I prefer straight sixes hahaha
@sprinterpilotАй бұрын
In the honda crowd, the ep3 which is the K20A3 is the least desirable engine for swaps. You should have used the more popular swaps like the K20A or K20A2 which is more commonly used for swaps.
@JesseSpecАй бұрын
Hi, its not an k20a3…. Its a K20a2 (Euro spec type R)
@theliverybros3733Ай бұрын
Bmw rim?
@JesseSpecАй бұрын
@@theliverybros3733 are you asking, what rims are on the car?
@mauriziobezzina3378Ай бұрын
what does involve about fitting in the car? i guess k20 will have much more work to fix to connect engine to the car and electrics
@JesseSpecАй бұрын
Hahaha, please watch my whole series on how to kswap an mr2 on the very channel. You will a detailed overview of all the steps necessary. Take look and tell me what your think (more than 15 episodes)
@Wolf-or6wsАй бұрын
It’s an amazing build I think the k20a really brings out the true potential of the chassis and 225hp is more than enough for this lightweight car, anything more it might start to get out of control
@JesseSpecАй бұрын
Hello, there is definitely potential. If I could drop some cams in, it would probably make massive difference 🔥🔥🔥👌🏼
@aundrek7515Ай бұрын
With the k series they have to breathe to make really good power. A 3“ exhaust exhaust with a 3” (3.5” is ideal) or bigger air intake system will get you big power gains. At least another 20+ hp throughout the rpm range. The ppe header is choking you as its 2.5”. I learned the hard way lol. Luv the build and channel
@JesseSpecАй бұрын
Hi man! Thanks for the kind and interesting comment. On the Mr2 swap, do we have another choice than the ppe? I guess I am learning it the hard way too hahaha Need to install some cams
@alejandr0031Ай бұрын
I know its not what the mr2 was made for but id love to see a 0-60 1/4mile time on the k20 setup!
@JesseSpecАй бұрын
Hi, thanks for your comment. There is nothing wrong with asking 😉🔥 I Will see if I can record that on the race track next time I go. Since its not a street car anymore I can’t really test that easily, but on the track I’ll try to get the 0 to 100km/h 👌🏼
@thebritishhippie9735Ай бұрын
Wow, it has been a while but welcome back. New subscriber using some of your vids on the 2zz :)
@JesseSpecАй бұрын
Thanks man! Well appreciated 👌🏼🔥 Did you finish the swap already?
@HanshinImportsАй бұрын
🔥🔥🔥
@JesseSpecАй бұрын
👌👌👌
@jacobyukheiАй бұрын
what do you think 18x9.5j +45 on stock suspenaion setup? Any rub?
@JesseSpecАй бұрын
It works well with that size. No rubbing on my car
@michaelhoang9669Ай бұрын
Does it rub with h&r lowering spring ?
@JesseSpecАй бұрын
@@michaelhoang9669 hi, no idea 🤷🏽 but I don’t think so. Mine does not rub with coilovers
@JeanMasuéАй бұрын
Awesome detailed videos. Help me so much. One question were does the starter signal wire from the honda link up to?
@JesseSpecАй бұрын
Hi, thanks for your kind comment. I was lazy on this one, I used the adapter harness and it just worked immediately 🔥👌🏼
@JeanMasuéАй бұрын
@@JesseSpec I got the map adapter harness on to a kpro. I got a feeling I need to swap my engine loom as it might be the issue as I got an open plug.
@JesseSpecАй бұрын
@@JeanMasué hi, to be honest I think that is where your mistake is.
@Bhumi-cg2doАй бұрын
pls pin
@JesseSpecАй бұрын
What do you mean?
@Bhumi-cg2doАй бұрын
i love chasers
@JesseSpecАй бұрын
Thanks buddy! Me too 🙂
@josephc2294Ай бұрын
What spring rates did you go for ?
@JesseSpecАй бұрын
Front 14kg and rear 9kg ;-)
@richardggeorgeАй бұрын
2gr fe 3.5 v6 is the answer
@JesseSpecАй бұрын
Hahaha! Haven’t tried one yet 🥶
@richardggeorgeАй бұрын
@@JesseSpec google search for this interesting thread "2GR home built swap details". Looks a bit like a widow maker!
@retrofittuning2 ай бұрын
I think you need more light on camera, its kind a dark view
@JesseSpec2 ай бұрын
Thanks for the feedback but thats actually the style I wanted to give it. Make sure your screen is not set to too dark
@retrofittuning2 ай бұрын
Nice car❤
@JesseSpecАй бұрын
Thanks man! Have a good day 🔥👌🏼
@KramerWells2 ай бұрын
Who's dry sump system did you use or design it yourself?
@JesseSpecАй бұрын
Hi, thanks for your comment. The man seems to be homemade though 😂 I sadly have no idea 🥲 maybe one of my viewers knows the brand of the pump?
@AhmedIbrahim-lb7qg2 ай бұрын
Fantastic We want to se the k20 mr2 mk3 in the track
@JesseSpecАй бұрын
Hahaha I know. I just edited one video of the mr2 k20. Its coming 😂 thanks for your patience
@DARDKOPF2 ай бұрын
Hallo habt ihr mal 17 x9.0 ET 45 probiert? Ich würde gerne bisschen mehr Gummi fahren habe auch andere Felgen in 17 Zoll auf den Yaris gesehen.
@JesseSpecАй бұрын
Hallo, Ich habe mal eine 17x8 oder 17x9 et49 probiert aber der brake caliper kommt an bein den TC105X 🥲
@cabeloe362 ай бұрын
awesome video!!! that deserve so much more views
@JesseSpec2 ай бұрын
Thanks man! I appreciate it 😊🔥
@fabienroxo2 ай бұрын
Hey ! thx for your video ! it's realy helped me to open my C60 transmission, I just needed to change my front case seal. Since I open the gearbox i'm thinking about remplacing my open dif to an lsd but i have a question, in what transmission I can found an lsd that can go in my C60 ? You used an 5speeds.... C50 ?
@JesseSpec2 ай бұрын
That is awesome to hear the video helped! You are welcome. You can use any lsd you find that is available and compatible with 5 or 6 speed transmissions. Depending where you are im the world I can even sell you a brand new one, like the one I installed in my video.
@shiwanthagimhani68032 ай бұрын
Good detailed video Answered lot of questions I’ve had on TC105x
@JesseSpec2 ай бұрын
Awesome! Thanks for your feedback and watching the video!
@ae92guy162 ай бұрын
I watch this video a while ago and today I'm installing lsd..... ae92guy
@JesseSpec2 ай бұрын
Awesome! Thanks for watching and good luck on your build!
@hoover777772 ай бұрын
Still using the Invidia exhaust? Downpipe stock?
@JesseSpec2 ай бұрын
Hi, I am using the HJS street legal sport car with Invidia exhaust 😉🔥
@gregg78692 ай бұрын
Hast du auch mal eine Messung auf deinem Leistungsprüfstand - die Invidia AGA zusammen mit der HJS DP gemacht? Würde gerne mal wissen ob du noch mehr PS als bei deinem letzen Video mit der invidia rangeholt hast?!
@TNGC2 ай бұрын
Ohhh!
@JesseSpec2 ай бұрын
あざっすタヌぐつさん!スイス遊びに来てください😊🔥💪🏼
@radstar21852 ай бұрын
I just got the turbokits 2zz t28 Billet kit for my 2zz Mrs just waiting on intercooler and a garage to install it. Much cheaper than a k20a2 or k24a2 in Australia and I can still use my apexi pfc to run it. Still nice to know a 1.8ltr 2zz is comparable to a 2ltr k20
@JesseSpec2 ай бұрын
Very true! All though I like the Honda engines, there is something that isn’t as nice as the Toyota engines from a drive feeling perspective
@radstar21852 ай бұрын
@@JesseSpec a properly spect turbo will make all the difference, I'll let you know how it goes
@Tom-Walther2 ай бұрын
Not Bad.... but you can brake much later with this car
@JesseSpec2 ай бұрын
Thanks 😊💪🏼💪🏼 its. Question of balls hahaha
@IHadToMakeThisAccount2 ай бұрын
2ARFE
@JesseSpec2 ай бұрын
I don't know that engine very well to be honest 🙂
@HanshinImports2 ай бұрын
🔥🔥🔥🔥
@Tom-Walther2 ай бұрын
Not really studied onboard videos beetween the races!?!
@JesseSpec2 ай бұрын
Any advice? What do you mean?
@Tom-Walther2 ай бұрын
I always look at my onboard videos beetween the courses, at least after the two training courses, so you recognize the fault before race courses
@JesseSpec2 ай бұрын
@@Tom-Walther thank you that is a good tip 😊👌🏼 did you see any major mistakes in my runs? 🙏🏻🔥
@Tom-Walther2 ай бұрын
Are you in Ambri this Weekend?
@JesseSpec2 ай бұрын
@@Tom-Walther sadly not 😭
@eddiecheung43852 ай бұрын
Best of luck !
@JesseSpec2 ай бұрын
Thank youuuu 🔥🏁
@madmikenzl2 ай бұрын
2zz-ge powered mr-s will smoke ya gr yaris!!! bring back that k20 mr-s!!
@JesseSpec2 ай бұрын
Hahahah thanks for the comment🤣 i am sadly not sure it would be faster. 2 episodes of k20 mr2 are backlogged. The will come
@Jun-ohGindroz3 ай бұрын
I hop you will do better this week-end
@JesseSpec2 ай бұрын
Thanks Jun-Oh! I actually did 😊👌🏼 new video is coming
@joseguerra45203 ай бұрын
Pinta bien por fin hace Toyota un coche rápido, pero debería de darle vergüenza a Toyota por ejemplo la porquería de Celica 7g
@JesseSpec3 ай бұрын
Hi, do you speak english? 🥲
@Slyracing163 ай бұрын
good luck🍀💪🏻
@JesseSpec3 ай бұрын
Thanks man 🔥👌🏼
@HanshinImports3 ай бұрын
🔥🔥🔥
@JesseSpec3 ай бұрын
Who likes this kind of Racing content? Or what else would you like to see on the channel?
@madmikenzl2 ай бұрын
Perfer mr-s content!!
@zokusharuuku10913 ай бұрын
I just have to say the power lost to the wheels in a fwd car is cloesr to 10-15% and thats with the wheels on. 18% is what rwd cars loose with the wheels on. If you do your calculations correctly and research right you will learn that only the lotus 2zz engines made 190 hp and all the others made 180hp or less depending on the year. The overinflated numbers your showing are very inaccurate so it might be best to just show the actual hp you made to the hubs which without the losses from wheels would be closer to 8 to 11%. If i recalculate your numbers you actually made 162 to the hubs which if you multiply by 11% makes the actual 180 the 2zz should make. Granted your losses are a bit less than 11% but the engine is used and will be down a hp or 2 further proving my figures to be more accurate.
@JesseSpec3 ай бұрын
Thanks for your input. I see you got triggered by the transmission loss. In Europe we just like to have an Engine power figure… you must be from the US. Thats funny, we get more often 25% as a benchmark for ff cars in transmission loss. Where do yOu base your claims on? In what country are you? US? I am Switzerland and our cars are officially registered at 192hp. US Spec is not like the EU Spec. We run with 98 octane, more like in Japan. To be honest the numbers seem very realistic. But even then, if you feel like disputing the transmission factor loss I use, thats your choice. Whats important in the end is using that transmission loss accross the board on all the runs and pulls I did after that basemark. To determine the gain. Who gives a damn about the end number? Its the gain we want to see. This is my first video, you will see there are litteraly a hundred more videos I posted and probably 30-40about the 2zz. Give them a watch and tell me what you think.
@jack_orourke_sb3 ай бұрын
Looks great 🔥 chasers are so sick
@JesseSpec3 ай бұрын
Thanka man! I agree 🥶
@remyche87683 ай бұрын
What's the best wheels spacers? And how many mm you need to have the stock bbs wheels to be flush?
@JesseSpec3 ай бұрын
Hi! Thanks for your question. To be honest spacers suck! They mess up your geometry and handling. Don’t put spacers. All your bushings and bearings will also thank you
@henzo37053 ай бұрын
The 2zz is also quite plentiful in junkyards appearing in the Vibe GT, Matrix XRS, Corolla XRS, and Celica GTS. These are often overlooked by DIY auto enthusiasts as opposed to Honda engines making cheap 2zz and components plentiful and cheap. While Honda engines are superior in tuning capability the 2zz has proven to be capable of making well over 500hp (although the reliability is a valid concern). If you Toyota fellas want more 2zz content check out the Jamaican drag racing scene, a good channel on KZbin is motorsportsja showcasing 2zz swapped starlets and Corollas making impressive passes.
@JesseSpec3 ай бұрын
Hi, thanks for your comment! Will take a look
@Jordan-mj2lf3 ай бұрын
Rare engine slide intake
@JesseSpec3 ай бұрын
Yes! Collector’s item 😍
@Jordan-mj2lf3 ай бұрын
@@JesseSpec toda engine original yes or no
@JesseSpec3 ай бұрын
@@Jordan-mj2lf its actually surely a french brand of itbs… i don’t know the brand hahaha
@sendtacos18243 ай бұрын
What engine temperature are you running on the track?