EPA 2013 MX 13 Changing the Servicable CCV Filter

[@geoestrada5001]

I already ordered this ocv ccv filter my truck started throwing a little bit of oil spray after performing oil change,

[@brandonblaylock9253]

Do you mind sharing were you ordered yours from?

[@brandonblaylock9253]

What year truck do you have?

[@jamesjackson2929]

Did you check to make sure the shop didn't over fill the oil? It could cause the oil spray.

[@johnnykessinger]

John Goodman narrating?

[@mrwonderful2081]

Can a dirty occ filter cause it to blow oil out of the ventilation tube?

[@joebackus5499]

0.9 hours if you start with the engine on a test stand. This is one of the worst placements of a filter that requires routine maintenance.

[@FrankSerrano]

You're welcome. OEM PACCAR CRANKCASE FILTER KIT, OCV MEDIA B, MX-13 2176887PE

[@maxenra]

I have a CEL and a code of SPN 5396 FMI 1 with a description “engine crankcase hose disconnected.” I’ve inspected, and it is connected. Could the filter needing to be changed be the reason for that code? Thanks!

[@sachinmaan866]

I have 2013 EPA 10 would it be the same for my engine as well.?

[@malcolmwilliams9402]

WHAT'S THE PART # FOR THE FILTER ?

[@FrankSerrano]

2176887PE

[@brandonblaylock9253]

How can you tell if your module is bad vs if the filter needs replacing? I have engine crankcase ventilation hose disconnected and engine crankcase breather oil separator speed codes.

[@edjahman]

it'll increasingly blow more oil out of the bottom tube is a symptom. I just replaced mine yesterday and it had quite a bit of oil at the opening of the tube.

[@bryceharper8798]

to bad video does not tell you every , like remove oil fill tube also the ecm , under the truck with wires that need to be removed out of the way also .

[@titofuerte25]

What year is your Kenworth ​@@edjahman

[@edjahman]

@@titofuerte25 I have a 2016 Peterbilt 579. It's the same CCV module.

[@josec080411]

👏👏👏👏👏👏👏👍

[@robpowrie1215]

How to make a filter change a complete pain send your engineer who developed that filter to cummins or detroit for an education on how to make it simple task just saying 😉

[@6.4DieselDoctor]

.9 hours my ass…. You’ll spend that removing zip ties and disconnecting hoses if you’re lucky

[@JewsSuck-yw8fb]

My quickest time was 0.5

[@adamgardner4213]

What chassis was this engine in?

[@michaelnewbury1279]

How often does this need to be changed. Curious about it. Thinking about buying a truck with the mx13 .

[@salvador4844]

Once it reaches the 500,000.

[@jamesjackson2929]

MX-13 Manual states every 90,000 - 120,000 miles. I have 15 MX-13's. I replaced them with the serviceable filters and do them every 60,000 miles or every 4th oil change (I do oil changes every 15,000 miles). Paccars are a royal pain in the ass. Whatever mileage Paccar recommends different services be done, do them in half the mileage.

[@bierutki]

Do I need to drain the oil to remove the ocv?

[@robindabank4089]

No

[@basitali5152]

Would this be the same for 2018 t680?

[@robindabank4089]

Yes

[@rustyshackleford516]

.9 hours is hilarious. So glad the industry is moving away from flat rate. Idk how they expect us to be able to afford anything when we have to buy all our own tooling plus all other living expenses. They want to turn around and fuck you on labor times. These people work round the clock to make it harder for a honest working man to make a living. So sick of how crooked this industry is getting.

[@edjahman]

.9 hrs is laughable. Those plastic connectors are the devil. I wound up removing the ECM to get to the top bolts and the bracket on the firewall side. This process is nowhere near as easy as they make it look when you are laying on a creeper in your driveway.

[@JewsSuck-yw8fb]

Did one in 33 minutes before. Not that hard when you get into a groove

[@gst4043]

Liers dealer want charge me three hours

[@6.4DieselDoctor]

It’ll take that long to do it. Paccar srt time is bull shit and I’m a paccar certified tech

[@JewsSuck-yw8fb]

Quickest ive done them is 0.5. 1 hour if im goofin off

[@Themixedmetalhead]

These are not fun to change at all

[@edjahman]

I did mine yesterday and just replaced the internals because EFFING PACCAR has had the updated module on backorder ALL YEAR. I had to remove the ECM to get to the top bolts and the firewall side bracket. Yes, it was all a huge pain in the assign my driveway at home.

[@georgeperkins4171]

I just got a company truck assigned to me. Kw with paccar. B4 I even left it started this high-pitched whine. The shop said it's this filter but they don't have it yet. Said it's ok to drive but to get in to another shop that has it on my route.

[@Themixedmetalhead]

@@edjahman yeah they are no fun. Did you do the filter or the whole module?

[@edjahman]

@@Themixedmetalhead I haven't been able to find a complete module all year so someone I know sent me a used one and I swapped out the internals. It's still the old one and not the updated one with the servicible filter. I'm pretty angry about not being able to obtain a new one from Paccar and I would've been out of business several times over had I not been able to run with it broken for months. Take care

[@edjahman]

@@Themixedmetalhead I had to remove the original module from probably 2016 and just replace the top part with the drum inside because it's been on national backorder pretty much all year. It works for now while I continue to wait forever for the undated one with the servicible filter.