Epic Cedar Gate Rebuild.

[@jonny-b4954]

No diagonal bracing going from upper outer corner to lower inner corner? Want that baby to be in compression not tension. That's #1 way to support a door long term and keep it level. The metal braces will help but I don't think they accomplish the same.

[@mehrrepairz]

If you look closely the metal brackets have metal cross braces. Not the entire length of gate but it’s sturdy. It also doesn’t allow for a wooden cross brace since it’d interfere. I can keep you posted on how it holds up.

[@jonny-b4954]

@@mehrrepairz Yeah, I'm curious how it'll work compared to the diagonal bracing. It looks great though. Gates are always a POS 5 years down the line no matter what you do, in reality.

[@davegordon6943]

I agree with Jonny. brackets won't last but it looks good

[@mehrrepairz]

@@davegordon6943 will keep you posted. I used it on a different rental a few years ago. It was my first gate that I ever built. It’s held up thus far but if it ever fails I’ll definitely show the end results!

[@benzracer]

Cross brace is always the way to go. Corner brackets will last a few years, but nothing supporting the length with such a long gate will sag quicker than you think. For longer gates I like two corner brackets and a cross brace, it’s held up my seven foot gate for five years no dramas.

[@ALLworldCONSTRUCTIONLLC]

I like it. Little wide to be a single but you can always add tension wire.

[@JeremiahJohnson556]

All you need is a brace from the bottom corner of the hinged side to the upper corner of the latch side. Attach to gate’s frame, not fence boards. It’ll last longer than me or you👍🏻

[@markschumacher7408]

You don’t want level posts. You want them to be plumb.

[@mehrrepairz]

True

[@HurricanesOfPlight]

Gorgeous. Top notch rework

[@mehrrepairz]

Much appreciated, friend 🙏🏽

[@Reign_In_Blood_963]

Great job of making another EPIC gate that will replicate the same exact problem you had with the old one. You need cross braces. Preferably notched into the frame to provide support. Super easy to do. Plenty of YT videos out there on how to.

[@mehrrepairz]

Look again. The steel brackets have small diagonal braces. There are four of them. Steel is stronger. You actually can’t slap a diagonal brace with those in the way. I’ll post if it fails but I have other gates up for a several years with no issues.

[@sonnymylovesosweat]

😂 it’s going to sag

[@WilWils208]

Mad respect for the second spit take.

[@hbgriss]

Dope

[@matthewdean7653]

As soon as as seen your stabila I knew this was going to come out nice

[@connorjames6516]

Level-ish

[@hotwaxonmyuddersohyeahmoo5701]

The only issue I see is you now have 2 heavy metal brackets hanging opposite the hinge. That 45 is not going to transfer anything but warm fuzzy feelings. Without an actual brace it's completely 50/50 if the wood holds. But maybe the lock will help too so whatever man your an American and I like your gate anyways

[@mehrrepairz]

Haha appreciate it. The brackets have a piece of iron that prohibits me from using any cross brace. I’d have to notch out each end somehow. I’ll keep you posted if it fails!

[@christophersmith8014]

@@mehrrepairz What do you mean? The cross brace doesn't have to extend fully into the corners to carry the load.

[@kennethmaese4622]

Wow! Handsome AND funny

[@mehrrepairz]

Both of those panels are a stretch but much appreciated!

[@AnEyeRacky]

1:09:33 he is different. He learns those skills from enemies when he uses Lancet. I dont remember which FF game introduced it, but most have an "enemy skill" type mechanic. Sometimes you steal the skill, sometimes you just have to be hit by it...a little different every time but similar in nature

[@rcirclebc3818]

Yes the brace from the bottom hinge to the top of the other corner takes all the pressure and stops the sag it would of been an easy fix by just adding that to the first gate

[@benfurbank]

Very splitty! 😂As a carpenter I feel like I should use that turn from now on!

[@mehrrepairz]

I would love it if splitty became a thing 😂

[@murphyr31]

That’s precisely why I had my fence guy put in metal framed gates.

[@mehrrepairz]

That’s the best way to do it

[@TheEagleCo]

Nice

[@andrewaitz8858]

I've been a carpenter for 20 yrs. Never heard splitty before.

[@mehrrepairz]

Makes sense. I hear it takes an average of forty years to hear it once. I just got lucky.

[@SnyperMac1]

You gotta put a diagonal brace from the inside bottom corner to the outside top corner or in time is just going to fail the exact same way except you now have expensive metal braces that are bent as well

[@zanderchiasson8064]

Nice fence but your could’ve just gotten it working with a diagonal brace and new hinges

[@mehrrepairz]

Thanks. It looked like absolute booty. Was it a poor financial decision? Yes… but will the tenant really appreciate the quality? Probably no… Don’t know where I was going with that

[@zanderchiasson8064]

@@mehrrepairz lol, good one there, still fun to make stuff nicer than it needs to be, might still be a good idea to add in a diagonal support to that new frame, goes a long way for longevity over the corner braces

[@mehrrepairz]

@@zanderchiasson8064 I thought about the diagonal brace but if you look closely the steel brackets have diagonal supports that are metal. This interferes with the wooden brace. I have gates up 5+ years that haven’t budged but I’ll definitely post it if it fails!

[@mysterymanforu]

Turnbuckles can help.

[@mehrrepairz]

I like your comment. Most people jump directly to death threats 😂. I’ll give them a look and maybe add it in a future video!

[@bertbergers9171]

What a nice video. Simple solution would have been to prop the old gate level and put in a diagonal brace. Now you made an extra beefy (equals extra heavy) square frame that will sag extra in a while. If you make a would frame door that wide, please show people how to fit a diagonal in the frame. That would be a grand video.

[@mehrrepairz]

We gotta get you a weight set if you think it’s heavy!

[@hoodhomesgardens]

@@mehrrepairz you can't hold your arms straight out for more than a few minutes. Use a cross brace, instead of those big box stores gimmick products.

[@evictioncarpentry2628]

Theres a good video somewhere on why you need a cross brace from the bottom hinge side to the top latch side and its the only way to go for a no-sag gate

[@jono9549]

Use half lap connections in the corners (and exterior glue) and use a diagonal board to prevent sagging - I have a 5' wide gate that is 5 years old and does not sag

[@tristonskelton1015]

Rebuilding is best course of action, but simple cheap fix for old gate is either support board inside diagonally bottom inside to top outside, or cable/ threaded rod from top inside to bottom outside. Wood is good at compression and thin steel is good at tension

[@ryanyork837]

I just use a diagonal 2 by 4 for a brace. Unless you want to spend the money for the fancy black knee brace brackets

[@Alex10Al]

You will never go wrong with replacing that wood post with a steel one buddy. Coming from a 24 year old contractor

[@mehrrepairz]

I agree. Steel post or at lease steel bracing is the best option for no sagging long term

[@jasoncampbell4723]

I looked it up, cedar is very splitty according to carpenters.

[@nomoregoodnamesleft2]

Those supports will work for a year or two but will ultimately fail. You can acc a compression support in the way of an angled support from bottom hinge side to top latch side, or you can use a tension method and attach a gate support cable from top of hinge side to bottom of latch side.

[@mehrrepairz]

I may just do that. The metal brackets have six beefy 2” nails in each corner with a diagonal metal support keeping it 90*. I have another gate as well that’s now 5+ years old with no issues. If it does fail or if I do add a diagonal brace, I’ll post it here

[@nomoregoodnamesleft2]

@@mehrrepairz wow then those are some good braces. Most of them i see today don’t hold up like that. Also I’m in a damp area so rust is a really big factor. Either way it’s only a crazy idea if it doesn’t work. Beautiful work though.

[@mehrrepairz]

@@nomoregoodnamesleft2 thank you. Time will tell. I’m in Seattle which is quite damp as well. The other gate is good but that was about 4 ft wife. This one is considerably wider so I’ll have to keep watch to see how it lasts. I’ll post if I learn anything from it though

[@nomoregoodnamesleft2]

@@mehrrepairz please do. Always love watching how people do things differently. I’m in Arkansas so it’s a muggy dampness. I’ve never been to Seattle, so i have no idea how to base it.

[@davidthelibrarian]

You could have just got a gate leveling kit. Would have saved a ton of time.

[@mehrrepairz]

It’s interesting, even though I spent way more money and time than I needed to, there’s a lot of comments about me being a “cheap” and “lazy” landlord 😂. Don’t think I can win either way.

[@mattfrownfelter558]

Need the diagonal brace or you’ll be back doing it again in a few years.

[@Topikseagull]

I’m so shocked that you don’t have a couple hundred thousand subscribers😂

[@mehrrepairz]

Wow that is incredibly kind of you! I’ll remember you and this comment if I ever make it big 😊

[@BespokeCarpentry]

Dude, I love you.

[@mehrrepairz]

You’re my new favorite

[@paddledogs]

the top looks really nice, I haven't seen that before

[@christhompson2006]

I've used that gate hardware kit before and it's just crap. It's made of very soft metal and those hinges will bend and sag in just a couple of years.

[@thee_number_six6227]

It would help if the gate was built right the first time

[@mehrrepairz]

True but you can only control what you can control. This was before the property was purchased.

[@Dcwood1979]

All it needed was a diagonal brace to support the weight. Hopefully you add it to the new one or it will happen again

[@mehrrepairz]

Do you think so? The metal brackets got six screws each (1 end grain and 5 long grain). They also have steel diagonals keeping them 90*

[@Dcwood1979]

⁠@@mehrrepairz I didn’t even see the metal bracket size. I feel like a real troll now. Looks like it would be more than enough. But still the old gate could have been fixed with a diagonal brace. Again. Forgive my ignorance, it was late and I obviously did t even pay attention.

[@mehrrepairz]

@@Dcwood1979 nah you’re not a troll or ignorant. Easy to miss. Very few people have experience with these brackets since they’re so much more expensive than a wooden cross brace. I’ll keep you posted with a video of it ever fails though!

[@Dcwood1979]

@@mehrrepairz with the size of the brackets, I doubt it will. I still don’t know how I missed how beefy those brackets were.

[@timwilliams347]

You could have just added a diagonal brace to the first one and not tore it down???? Why???

[@jordannicholson9893]

Just brace it also the post isn’t actually level. Level is the bubble having the same space on either side of it between those two lines. Not that it is between the two lines.

[@husbandfathergrandfatherfriend]

Stainless steel screws aren’t stronger they just don’t rust so it doesn’t make your gate more sturdy or stronger actually, they’re probably weaker than your typical deck screw

[@mehrrepairz]

This is true. The 2” stainless steel screws are much better than the 5/8th deck coated screw though. It’s a 5’6” wide gate and I figured the 2” stainless would have more “bite.”

[@GALAXY_M4N]

People acting like you have there wallet and also acting there is other ways to do something, great work 👍🏼

[@iplayzthegames6968]

I'm a carpenter, there is a correct way to build a gate, that is going to sag because there's no diagonal bracing

[@carrias1]

Oh for a landlord that does this, let alone the legal minimum

[@wesleyswartz7501]

Paid for with unrefunded security deposits

[@carrias1]

@@wesleyswartz7501 but when the landlord was inspecting he found a sock?! You’ve seen monsters inc, you know how expensive removing a sock is?

[@drjonritz]

A single diagonal brace would’ve fixed that

[@mehrrepairz]

Nowwww you tell me… where were you a few weeks ago???

[@drjonritz]

@@mehrrepairz Hehe, nice touch on the top of the new gate, though. Nice video, too!

[@mehrrepairz]

@@drjonritz thank you!

[@fishingwithpabs8391]

Bro got the Gucci fence 💀

[@dantrumphour3068]

1st off good job. I am not a fan of the hardware with the braces in the corners. I have not had good experiences with them. I think a diagonal brace described in other comment work a lot better. Time will tel in your case. Have a good day.

[@BurritoBatterski]

“Posts were level.”

[@rubenvandenbosch4172]

Instead of the stupid metal peaces you need to put a diagonal wood peace from the Bottom at the hinge side to the top of the other side that is the best way to make a gate

[@cbinder46]

Those brackets will definitely do the trick, but a compression diagonal brace is the most cost effective repair that works really well. Others may have said these brackets won't last long, but they are just wrong. They will last longer than the wood for sure....just a bit pricier than the aforementioned diagonal

[@mehrrepairz]

You’re absolutely correct. The brackets are 10x more expensive and definitely not as cost effective. I also agree that the brackets hill hold far past the cedar. Most people never use the brackets because they’re way more expensive. Human nature dictates that you’re scared of what you don’t know. I saw the same thing in my comment section when I posted electrical videos using Wago lever nuts. It was a battle between US and European electricians. The US electricians swore that they’d burn down houses….. however, there was no data or evidence to support those claims. Largely anecdotal. The US electricians just don’t have the 2-3 decades of experience with lever nuts that the European sparky’s do so they immediately discredited the lever nut as dangerous. In reality, the EU sparkys are correct that it’s just as safe as wire nuts; however, lever nuts are also more expensive, so you likely won’t see that rhetoric translate to the US anytime soon. Long story long, I agree :)

[@mworld]

no cross bracing, wont be long and it too will be falling apart.

[@Xdavid-rX]

I’ve been a carpenter over 30 years and I’ve never used the phrase “splity”

[@mehrrepairz]

That’s because they usually teach that word at the 50-year mark

[@debrarobey3749]

handsome craftsman excellent skills. tell me more. beefcake. ✌️🙏🙏💙

[@ireadalota]

I made a nice level gate about that size many years ago. It is still hanging. I had to wait for hubby to arrive home to hang it.

[@mehrrepairz]

Nice work 👏🏽

[@Silmerano]

Gates without a proper cross brace never last in my experience.

[@mehrrepairz]

Have you tried these before? I’ve done it both ways and can see the benefits. These metal brackets have little metal cross braces in each corner to keep everything 90*. They also use six beefy 2” screws for each corner (24 screws total). I’ll keep you posted if it fails but the one I created several years ago still stands square

[@Cre8tive81]

Just trying to help, the new gate will 100% sag as well over time… you didnt put in a brace diagonally..

[@mehrrepairz]

I’ll keep you posted of it does. Each of those metal brackets have metal cross braces which will keep the corners 90*. They also have six 2” stainless steel screws (1 end grain and 5 long grain). I have hated 5+ years old that are still doing well. Hell, I’ve done ‘‘em both ways. No problems this far but I’ll post a video if anything goes awry 👍🏽

[@grizzlygamer8891]

A Diagonal brace would work better and look beeter.

[@monkeymaneatsliberals]

Are we just gonna ignore him blowing that fences back out?

[@mehrrepairz]

Yes

[@monkeymaneatsliberals]

@@mehrrepairz shit was kinda hot ngl 🥵

[@3vil3lvis]

Bizarre how the gate is old and the posts are new.

[@mehrrepairz]

I like your tin foil hat 👍🏽

[@eddiehidalgo7739]

Where is the next video ?

[@GrimmShade95]

Beautiful work Cx

[@robcarter2891]

Need a diagonal

[@RabbitsInBlack]

Post looks newer. Door looks like he just put an old door on a new fence.

[@mehrrepairz]

Amazing. This is the strangest conspiracy I’ve ever heard 😂

[@sirtko]

🤗🙏🏽💚💚💚✊🏽✨🌌🫂🕊️

[@TwiztedGamingNetwork]

Where did you get the brackets?

[@mehrrepairz]

Small mom and pop store called “Amazon”

[@TwiztedGamingNetwork]

@@mehrrepairz never heard of them lol. Nice video you think they would be strong enough for a 4x8 shed door

[@mehrrepairz]

@@TwiztedGamingNetwork you know, I’m not entirely sure. I think I’d rather use two sheets of T1-11 siding with some 2x4 framing sandwiched inbetween for a shed door. You can also insulation boards in the cavity if you want some R value.

[@jmackinjersey1]

You'll still have a saggy gate in about a year or so. Learn how to use lap joints and wood glue as well as a proper angle brace. Your gate will never sag if you build it properly. Not to mention that, when building a gate like you did, the top board goes all the way across and the side boards go all the way down, while the bottom board is supposed to be between the two side boards. The way you have it, water is going to sit on the top of the bottom board ends and rot the ends of the bottom board as well as the bottom ends of the two side boards. Also, those are the absolute wrong hinges to use. They are too small and will not provide the proper support needed to keep the gate straight. The ones you have on there before were the proper hinges, but the washers were missing, to the lag screw head pulled through. But hey, you liked rebuilding a poorly built gate once, you can perform that again next year.

[@mehrrepairz]

@@jmackinjersey1 but… but I did this 5-years ago and the gate is perfectly fine…

[@Clevelandsteamer324]

Existing posts were “plumb” not level

[@marnixkamminga8083]

Beefed it up with stainless screws? Stainless screws are brittle and snap easily. And their holding a door

[@bobschiebel3325]

Landlord special. Your gates gonna get stuck in 2 years without the diagonal support. Hope you didn't charge the tenant

[@mehrrepairz]

Why would I charge a tenant for a gate? 🤔. I’ll post it if it fails but I have other ones with steel brackets as well that haven’t budged in 5+ years

[@iplayzthegames6968]

Bro, it was sagging before cuz there was no diagonal brace and you made the same mistake, you need a diagonal brace going up and away from the hinges

[@mehrrepairz]

I agree. With no diagonal 2x4 or with no steel corner braces that have steel diagonal cross bracing in each corner (take a closer look at each bracket), it sagged before. I uploaded part 2 as well

[@iplayzthegames6968]

@@mehrrepairz I see your diagonal corner bits but due to the size of the gate it's simply not going to be strong enough, those look like they're designed for small personnel type gates

[@juicewurld9876]

I’m literally on the toilet…

[@davidjaminsky]

AnD YoU StILl DiDnT UsE a CoMpReSsIon BrAcE DiAgOnAlLy FrOm LoWeR HiNgE To UpPeR ExTrEmEtY?!?

[@mehrrepairz]

😂😂😂

[@craige4049]

I used these on my two gates. The smaller one works well still a year later. The larger gate however does not and is already sagging.

[@carlmax46]

it just needed a diagonal cross brace. no need to rebuild the whole thing.

[@mehrrepairz]

Nowwwww you tell me…

[@beans4gas]

Gal darn. Couldn't even color match the wood. 😂

[@mehrrepairz]

Cedar is better and more expensive than pressure treated wood which is why the framing is different than the posts. As for the slats, Cedar will turn gray over time unless it’s stained, so I’d either have to renew all the fencing around it or I’d have to use old boards for my new gate; however, instead of taking the time to explain this, please let me enlighten you with a smart mouthed quip instead. *ahem* Just because you color match your purse and shoes doesn’t mean you gotta do it with your gate.

[@beans4gas]

@@mehrrepairz I guess I did a bad job of not being serious. Was suppose to be sarcastic poking fun of those who made the other comments. Nice work in the gate. Looks nice.

[@mehrrepairz]

@@beans4gas thank you 🙏🏽. Hard to tell these days haha. I’ve seen it all in the comment section. I’m no professional fence builder myself, but I’m shocked at how many experts are out there 😅

[@norml.hugh-mann]

Omitting diagonal braces is doing if wrong

[@The_ESWOOSH]

Bruh put a diagonal cross brace wut iz u doing?

[@mehrrepairz]

@@The_ESWOOSH been up three years and still holding like a champ. I agree though that a cross brace wouldn’t hurt.

[@jaredyandell1220]

Just trying to help out I been doing fencing and gates for 22 years I’ve been in a lot of magazines and too 5 percent in the nation so please don’t come at me like a know it all you never hang a gate on a single post without a back up post on a corner or on a higher side I know my stuff bud!! I’ve built over 4000 gates! Didn’t mean to piss you off trying to give you a tip!! A pro not a beginner!!!!!!

[@mehrrepairz]

Hey man, I don’t think you read my comment. The thing that rubs people the wrong way is that you’re a bit condescending in your approach and act like a know it all. Your comment above kind of supports what I said as well

[@derstaubsauger6894]

Talk faster, Red Bull.

[@billnumberfour]

Cedar is hardwood

[@mehrrepairz]

In which universe?

[@jaredyandell1220]

Omg never do this anyone the gate is off one post by itself which can’t handle the support of the weight a day later always hinge off the lower side of gravity and idk so much more I really hope this is a joke 😅

[@mehrrepairz]

I did this three years ago. Went there yesterday to add anti-tip brackets for a stove. Gate looked pristine. Maybe ask questions from a place of curiosity vs acting like a know it all?

[@thomasslone1964]

And why are you fixing it right away?

[@darbypea2223]

As a carpenter myself I can confirm, splity is the official term

[@grubby1975]

"Ugly, Saggy, Hammered" sounds like a chick I know...

[@sonnymylovesosweat]

It’s going to sag

[@daydodog]

Lmao use a fricking triangle. Landlord doesn't even know how to build a gate

[@mehrrepairz]

For anything over 5’5” wide I use steel brackets. It’s more expensive but believe it or not… metal is stronger

[@ricktong6914]

This gate hardware kit is a bust

[@mehrrepairz]

Think so?

[@EC-ol6ck]

Typical landlord

[@mehrrepairz]

I don’t think many landlords take this much time and money to build a gate….

[@EC-ol6ck]

@mehrrepairz lmao what. How much time did it take? How much did it cost for you to do a shitty job vs hiring a carpenter to do it right? There are even carpenters in your comments telling you how you should've done it, and you brush them off

[@mehrrepairz]

@@EC-ol6ck it’s not rocket science my guy. These are “keyboard carpenters.” Did you check their licenses? I have carpenters who work for me on flips who swear by the brackets. These brackets much more expensive than a simple 2x4 so a lot of DIY don’t have experience. You’re scared of what you don’t know! Watch how US electricians bash Wago Lever nuts claiming they cause fires with absolutely no data… and the European sparky’s (who’ve used them for 2-3 decades) swear by them because they’re better…. Because they are… Truth is that you don’t know anything about construction… less about social media… and nothing about being a landlord. To enlighten you, take a look at any of the top social media accounts of licensed tradesman. People are always criticizing in the comments. I’ve seen people trying to correct Paul Sellers on woodworking 😂. You should also do me a favor and research something until you turn blue… spend every dollar you have in your savings…. And check the comments. I GUARANTEE you there will be people unhappy with your approach. A lot of the bigger pages now switched to being pure salesman that just post tools you should buy. Look at Kreuger Construction on insta. It’s basically QVC for construction bros. Not my style… not interesting enough… For the total cost breakdown is in the second video. Don’t be lazy, go look at it. Then let me know what “typical landlord” is spending on a pure cedar gate. Not a single piece of pressure treated wood was used. It also took about a day to build out with details and staining. Last bit of advice, Instead of regurgitating a catch phrase to fit a popular narrative, try to think for yourself. You’ll do much better in life. 👍🏽

[@EC-ol6ck]

@mehrrepairz I'm a licensed master electrician. The EC in my name stands for Electrical Contractor. Stay mad, idiot

[@clayton9136]

Wrong, work smart AND hard.

[@vicflo0791]

You didn't use the old fence as an omage you did it because you're cheap ... No diagonal support ...😮

[@mehrrepairz]

Yes. Using $60 brackets and all cedar wood is a “cheap move.” Taking more time and effort to resaw a piece of the old fence was more inexpensive than using a $3 cedar picket. You caught me

[@vicflo0791]

@@mehrrepairz $60 you got ripped off, they seen your dumbass coming ... 😒

[@hoodhomesgardens]

Lol.... those brackets are laughable,

[@mehrrepairz]

You gotta quit laughing and work on your content. I believe in you.

[@justinbenscoter2052]

Still gonna sag, only one way to make a gate that doesn’t sag… learn how to weld and make it outa metal like a real man😂

[@mehrrepairz]

😂 noted. I actually really want to get into welding. Any advice on getting started?

[@jimmyboe25]

You will be fixing in 5 years

[@mehrrepairz]

But the news media says that AI will be fixing it in 5 years

[@dbgfpv6728]

That post was not level homie

[@mehrrepairz]

Which one you thinking?

[@andrewdraper8336]

That was sad

[@mehrrepairz]

My condolences

[@jaredyandell1220]

I’m hoping this is a total joke I really am that’s why you’re spitting from your gate build

[@mehrrepairz]

Three years later and it looks great. Don’t know what more you want.

[@robertjohnston6387]

That’s level lol no it’s not. Not even plumb bud

[@joeandrade784]

Original gate was built rong. And the new one is also built wrong

[@mehrrepairz]

The original attempt at spelling wrong was spelled rong

[@markpaperhanger2481]

You don’t know what level is mr two take fake spit

[@mehrrepairz]

You don’t understand how fast I have to talk when recording these videos 😂

[@markpaperhanger2481]

@@mehrrepairz the mouth and the level are not connected Plumb and level two words to live and die by

[@kevinnix5495]

Just needed a cross brace 😂

[@donaldthomas3173]

The posts were plumb, not necessarily level.

[@mehrrepairz]

True. I talk very fast when recording these and sometimes slip

[@lp1119]

Did he put a level on a fence

[@mehrrepairz]

No. It was a gate.