EPIC Video! "NOW ANYONE" Can Make Their Car Battery LAST FOREVER!! YOU HAVE TO SEE THE FULL VIDEO!

This Tool amzn.to/3L0yP5v Will save you hundreds and hundreds of $$$$ FOLKS this unit is so small, it is actually smaller than my hand, and does so many things it will blow your mind...it re-vamps car and truck batteries, it welds and it staples.
THE BEST Ceramic Coating EVER goo.gl/z9TrgR
Tools Below
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
Welder Used in video amzn.to/3L0yP5v
You can go with the 180 AMP amzn.to/3OX5pqa
or
You can go with the 200 AMP amzn.to/3EjGjgd
Syringe amzn.to/44tvouU
Distilled Water amzn.to/3L0brFo
Best Welding Gloves amzn.to/3KZS53b
Best Welding Helmet amzn.to/3OTXmKF
Wall Mounted Power Washer amzn.to/3PeGYpq
Original Battery Video • How To RENEW CAR & TRU...
Our Motorcycle Channel / sweetscoots
Camera Used in this video amzn.to/45khwnm
For OUR FREE GIVEAWAY
Just Send a comment to us that you want a free sample in our free giveaway.
Our channels:
/ sweetprojectcars
/ mrknowitallguru
/ sweetscoots
/ sweetmotorhomes
ALERT**** Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
________________________________________________
If you would like to help us out.
www.paypal.me/...
________________________________________________
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZbin channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.

[@SweetProjectCars]

Guys and Gals if you did not watch the entire video you need to stop right now and go do so, you will be glad you did, we promise.....This Tool amzn.to/3L0yP5v Will save you hundreds and hundreds of $$$$ FOLKs this unit is so small, it is smaller than my hand, and does so many things it will blow your mind...it re-vamps car and truck batteries, it welds and it staples. Quote of the Day: *Your talent determines what you can do. Your motivation determines how much you’re willing to do. Your attitude determines how well you do it*

[@SVMSICE]

I’m gonna tear apart my microwave and make myself one of these units. That’ll save even more money. Thank you for the idea! You rock 🤘🏼

[@rhondaholland4604]

Okay, ready to buy but have 2 questions. 1) Will this do both car and motorcycle batteries? 2) Is the smallest version the one we really want or should we use the discount to jump up another level to the 180A (or even the 200A)?

[@Leonardokite]

Almost ordered the 200 AMP, but no discount so settled for the 140 AMP. Considering how bad I suck at welding I probably won't use it as a welder anyhow. I probably should've done this a while ago but ended up getting even a better deal by procrastinating. Sometimes things just work out LOL. And I do have two batteries now that need the treatment.

[@billiemcfadden5808]

I'd love to sample that lube you are apparently a big fan of.. do I leave my address here? Is this comment even in the correct spot to request the sample? Please let me know!😬 Also, thank you for ALL the phenomenal info, tips, advise, knowledge and expertise that you always share so generously! It's very much appreciated 🥰

[@SweetProjectCars]

LOL, thanks for watching, have a great week. mad Mike

[@benjaminchavez1232]

I was literally about to pull the trigger on the 24" model from your first video... then I saw this! And i was needing a small welder that I almost picked up from harbor freight for 80 bucks. What perfect timing of me finding this. Thank you so much! My friend just paid 200 for a new battery so I feel like I'm getting one heck of a deal. Much thanks and respect from New Mexico USA

[@SweetProjectCars]

Glad we could help Benjamin! Thank you for watching and sharing, have a great week my friend. mad Mike & team

[@kidsteach938]

hey! Nice little machine. The battery looks ancient, but the 11/20 sticker would indicate that it is less than three years old?

[@alexguzman5547]

These days it's like a lot of batteries are almost made to die right after the warranty period is up. Where I'm at that's pretty much either a year or 18 months, so anything past that's a huge win 😅

[@SweetProjectCars]

It's a great little machine my friend! This is a lawn tractor battery, they usually only last one season, we've kept it going for almost 4 years for a savings of over $200. Thanks for watching, have a fantastic week. mad Mike

[@rosaurobusarangjr378]

I also have a old car battery 4 years old ,should I clean it first? I mean drain the liquid battery? Wash it with baking soda?

[@Leonardokite]

What! But the zip-tie repairs look so cool Hahahahaha. Seriously, I've seen plastic bumpers that were ripped apart and repaired with zip-ties. It looks hilarious LOL. Now I cannot believe that the welder is 60 bucks! You double your money on your first battery repair. Now that is one amazing tip my friend. Plus you get the bonus plastic repair kit also. You knocked this one out of the ballpark Capt.

[@SweetProjectCars]

It's sweeeeeet Leonard!! What a fantastic little tool, you are going to love it! The one we use in this video will do any battery that you have with ease! Thanks for watching as always, hope you have a great week my friend. mad Mike

[@keithbrookshire]

I just placed my order. It's worth it just for the plastic welder. Refurbing batteries is a bonus. Ten thumbs up for this video.

[@SweetProjectCars]

Absolutely Keith!! It's a great little tool! Thank you so much for watching and sharing and for the 10 thumbs up, we truly appreciate it my friend. Hope you have a fantastic week. mad Mike & team

[@FireSloth1134]

I almost bought a Harbor Freight wheeled battery charger for $150, then researched more and found I should use a manual charger, not digital w/all the safety features after reviewing your old video. Thanks for commenting on the old video to check out THIS new one because now I'm on the best path! I just ordered the 200A version since I'm thinking about learning to weld now. Even this model was 60 cheaper than that HF charger I'd have been disappointed with. And this is dead simple with no stupid safeties or "BAD" readout on a charger refusing to touch some batts. Thank you! 🤘

[@SweetProjectCars]

Glad you liked it and were able to get your hands on one Andy! You won't be disappointed my friend! Thanks for watching and sharing, hope you have a fantastic week. mad Mike & team

[@enriquemejia6697]

Good decision on not buying the big HF charger..they are crap..I've had mine fail and a friend's one as well. Other HF stuff has been fine..even the small chargers have lasted over a decade..that's pretty good. My best one I found in the trash and fixed.. and old early 60's Shauer!

[@izh6421]

Would this small welded do the trick with any battery even a diesel truck battery?

[@slamdunk6170]

Hey guys my inlaws battery died out of nowhere on there 2019 nissan and I hooked up my small stick welder to it and one of the cells was not bubbling,,dead, I ran it on low,25amps, for about 3 minutes then 85 amps 2 minutes then 135 amps 1 minute with 45 minutes in between cycles,, After 4 times the cell started to come back to life,,did it 2 more cycles,,its been 2 weeks and the battery works like new ,,,this definitely works..

[@SweetProjectCars]

Awesome!! Thank you so much for watching and sharing your results, we really appreciate it slamdunk! Have a stupendous rest of your week my friend. mad Mike

[@josephsteffen2378]

Great video. That charger, welder, power supply...thing is badass!

[@SweetProjectCars]

You got that right Joseph! Thanks for watching and commenting, have a great day my friend. mad Mike

[@briancooper4767]

Hey Mike! I just ordered this machine thanks to your video... looking forward to using all functions, seems like a great multi function garage unit! Feel you on the heat, we are melting here in south AL 😅

[@SweetProjectCars]

LOL, we are neighbors :) Thank you for watching and sharing Brian, hope you have a great week my friend. mad Mike & team

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@briancooper4767]

Yeah I work in Pensacola actually! Love the videos, have learned alot from you over the years and appreciate everything you share!

[@dsimp765]

Very inexpensive for what you get 👍. Great video. Thank you

[@SweetProjectCars]

It really is! We are very impressed! Thank you for the view and comment, it's appreciated my friend. Have a great week! mad Mike & team

[@chrisfreeman6540]

That's a sweet little rig thanks for showing and all ur hard work

[@SweetProjectCars]

Our pleasure Chris! It's a great find! Thank you for watching and sharing, hope you have a fantastic weekend my friend. mad Mike

[@Lochlee]

Now that is epic. Going to try it on my big honkin' solar batteries. They are in need of some help and at almost 1k a pop there is no way in tarnation that I can afford new ones. Thanks for the idea!

[@SweetProjectCars]

You can do it Lochlee! Thank you for watching and sharing, have a great weekend and all the best on your project my friend. mad Mike

[@muskcoder6367]

Nice little machine, thanks for another great informational video. Always learning from your videos.

[@SweetProjectCars]

Glad to help muskcoder! Thank you for the view and comment, it's always a pleasure my friend, hope you have a fantastic week. mad Mike

[@ezorro5920]

Wow! Rejuvenate flooded batteries, repair plastic, and arc weld all with one tool. Plus a 10% discount code, I think my birthday is around the corner.

[@SweetProjectCars]

Happy Birthday to YOU!!! LOL This amzn.to/3L0yP5v is a great gift for yourself ezorro!! Thanks for the view and comment, have a fantastic week my friend. mad Mike & team

[@ezorro5920]

@@SweetProjectCars Thank you Mad Mike. My birthday is just after Labor Day. I'm also praying Idalia won't affect Florida too badly.

[@RogerPack]

Stick weld...

[@triumphmanful]

How and 😊where do I buy the welder?

[@ScotWalt858]

That's pretty slick right there!! Greatly appreciated!

[@SweetProjectCars]

Our pleasure to share Scott!! This is a sweeeet little unit! Thank you as always for being here with us, we truly appreciate it, hope you have a fantastic week my friend. mad Mike & team

[@geoffkeller5337]

Awesome little machine! Thank you for the tips and tricks! I received my sample yesterday!!! Thank you and that stuff is amazing!

[@SweetProjectCars]

Glad you like it Geoff!! Also glad you received your lube, it is an amazing product!! Thank you as always for being here with us, it's appreciated my friend, have a fantastic week. mad Mike & team

[@evlutionzllc5519]

Thank you for helping us!

[@SweetProjectCars]

Happy to help! Thank you for the view and comment, we truly appreciate it, hope you have a great week my friend. mad Mike

[@LevizGibson]

Dude! I have that exact motorcycle on my workbench that my old biker buddy gave me a decade ago!

[@SweetProjectCars]

Nice! Thanks for watching and sharing Leviz, have a fantastic day. mad Mike

[@ilikecars911]

Not a bad little unit for the money. Thanks again for another great idea.

[@SweetProjectCars]

It's a great deal for a great tool my friend! Thank you for watching and sharing, have a great week. mad Mike

[@juanrgarcia5837]

​@@SweetProjectCarsDonde esta julio?

[@vampire_kiril]

man once again you are hands down the best car channel on youtube ever.

[@SweetProjectCars]

Thank you so much Stella!! We truly appreciate the view and kind comment, hope you have a stupendous week my friend. mad Mike & team

[@WV591]

Dan, I just sold my like new stick welder and box of welding rods practically for nothing cause i wasn't useing it. wish i had seen this few days ago

[@andrewmunchkin7212]

Wow, I'm buying one 🏆🤠👍that would also fix cracked atv and snowmobile fenders too.

[@SweetProjectCars]

Right on Andrew!! Thanks for watching and sharing, have a sweeeet week my friend. mad Mike

[@RichardNichols-s8w]

Good evening, I watched your video, ordered the welder and would love to try the sample of the lubricant. Thank you for all you teach us!

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@dannpd1955]

I love your channel. Thanks.

[@SweetProjectCars]

Glad you enjoy it! Thank you so much for watching and commenting, have a fantastic week my friend. mad Mike & team

[@Nico_335i_DCT]

Thanks for sharing Mike. This little unit can do a lot! Have an awesome week, regards Nico.

[@SweetProjectCars]

It's a great little find Nico! Thanks for the view as always, we appreciate you my friend, have a great week. mad Mike & team

[@silvergrizzly316]

Sweeeeeeeeeeeeet!!! Looks like you've got something there Hammer! I may just hafta get one of them. Although, that last feature with the staple, almost looks to me like a miniature branding iron😬😂. Anywho, I really like the compact size and being able to stick weld👍I'm just surprised you didn't get the 200amp machine😁 Brother take care and God Bless! Jay.

[@SweetProjectCars]

It's a sweeeeet little device my brother!! Thanks as always for watching, hope you have a blessed week my friend. mad Mike & team

[@chargermopar]

That must be some kind of high frequency welder. Very interesting!

[@SweetProjectCars]

It's this amzn.to/3L0yP5v and it's all we will be using for this process from here on out my friend. Thanks for watching, have a great weekend. mad Mike

[@marstondavis]

Great knowledge and good tools. An unbeatable combination.

[@SweetProjectCars]

Couldn't agree more Marston! Thanks for the view and comment, hope you have a great week my friend. mad Mike

[@mikeledee8786]

What do you recommend as a float/charger for 2-6 volt golf cart batteries or/and 2-12 volt deep cycle batteries? Thanks.

[@Halaster53]

Great video! I had no idea you could use a stick welder for this purpose.

[@SweetProjectCars]

Yes you can! Thanks for watching and sharing Halaster, have a great week. mad Mike

[@aldeal3793]

That seems to have worked great for me on the last battery.

[@SweetProjectCars]

Awesome! Thanks for watching and sharing, have a great weekend my friend. mad Mike & team

[@GuzzyMan]

Thank you SPC!

[@SweetProjectCars]

Our pleasure GuzzyMan!! Thank you as always for being here with us we really appreciate it, hope you have a sweeeeet week my friend. mad Mike

[@johnnyh4891]

Yep, just ordered mine, too! Love the channel!!

[@SweetProjectCars]

Awesome Johnny! Thank you so much for watching and sharing, we truly appreciate all of our great subscribers like you, have a fantastic week my friend. mad Mike & team

[@timbrimmer9701]

Thanks for the video! Just ordered the 200 amp version. Planning to use it on a battery that will no longer take a full charge. I would like a sample of the lube.

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@MrTamby]

Awesome video! And greetings from Cantonment neighbor

[@SweetProjectCars]

Hey, thanks neighbor!! We appreciate the view and comment, hope you have a fantastic weekend my friend. mad Mike

[@niconine268]

Geez Mike. That machine is awesome. I have dead bike batteries. And i see it not only does welding but the heated staples for plastic as well like you demonstrated. Im not in the US though

[@SweetProjectCars]

I'm pretty sure you can get this amzn.to/3L0yP5v in South Africa Nico. It's a sweeeeet machine for sure! Thanks for the view my friend, have a great day. mad Mike

[@jeffcarpenter6306]

Thank you for the demo. That is a very nice unit. I wish I could have used the discount code with in the limited time. It will be a future purchase now.

[@SweetProjectCars]

Yeah, they leave it for a limited time only, but it's still a great tool for the cost. Thank you for the view and comment, we appreciate it, hope you have a great day. mad Mike & team

[@kerrykoehler9112]

Will this method also work on 8V lead acid golf cart batteries?

[@paveljelinek772]

Yea did this, not 12.3V in the morning anymore, it's like 12.5V now 👍👍👍👍👍👍👍👍

[@SweetProjectCars]

Nice work! Thank you for watching and sharing, we really appreciate it, hope you have a fantastic day my friend. mad Mike & team

[@ronbasjes7419]

Our 2004 corolla still has the original battery!

[@SweetProjectCars]

You are very fortunate!! Thanks for watching and sharing, have a great week. mad Mike

[@Mrch33ky]

Excellent info! Many thanks!

[@SweetProjectCars]

Glad you enjoyed it! Thank you so much for watching and sharing, have a fantastic week my friend. mad Mike

[@dogsplantscarsneatstuff176]

Mike could you tell us the make and model of the tractor the main battery in this video is off of? Is it from a 20hp small implement? It looks to me like a riding lawnmower type battery. The reason I ask is as you said in the comments most small implement batteries are good for a year maybe 2 at the outside. Thanks.

[@Bob-gn8ph]

❤🙏🏻❤️🙏🏻❤️🙏🏻❤️ I'm ordering that welder thank you❤❤❤

[@SweetProjectCars]

Glad to help Bob! Thank you for the view and comment, have a fantastic day my friend. mad Mike & team

[@imwalt3439]

Fyi, the 140 unit is a black friday special right now. Just ordered one

[@SweetProjectCars]

Great to hear!! Thanks so much for watching and sharing, our viewers will appreciate the tip my friend! Have a fantastic day and Happy Thanksgiving. mad Mike & team

[@phildunaway2922]

Hay Mike I really liked what I saw on your demo and ordered one it just came in today can't wait to try it out myself. I'll let yah know how it turns out soon. thanks

[@SweetProjectCars]

Glad to hear Phil! Thank you for watching and sharing, hope you have a great weekend and all the best on your project my friend. mad Mike

[@MyGuyKirby]

I saw another video using that staple device. Fixed a crack housing on their tractor and then melted or filled in the the crack.

[@SweetProjectCars]

Absolutely MyGuy!! It's a great tool for sure! Thanks for the view and comment, have a fantastic week my friend. mad Mike

[@marcob.7801]

Mike,....you are the best! Going to order one tomorrow. Is there any way to revive a 12volt AGM battery (only 2 years old but let it stay in the van w/o turnover for about 10 months) ...that reads .51 on my multimeter? Forget about the modern chargers, even IF you try to trick them. Is it possible to use this machine? How would one monitor If it was coming back to life?? Thx for all the info.

[@SweetProjectCars]

This process works on all lead acid batteries Marcob. Thanks for the view my friend, have a great day. mad Mike & team

[@mcgeheewoolf2937]

Your channel is just the best! Does this process change on an 8 volt golf cart battery? My batteries are about 4 years old and I have lost power and range. Can I do it on more than one battery at the same time? My golf cart has six 8 volt batteries in it and I would love to do them all at the same time if that's possible. What do you think Mike? Can I get a sample of that lube too?

[@SweetProjectCars]

Hey, finally got to your comment my friend. This process works on any lead acid battery, for golf cart batteries, just cut all of the timelines in half. And, yes, you can do them together if you want. Thanks so much for watching and asking, hope you have a fantastic week. Also.............Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@MichaelR58]

Very cool video, thanks for sharing , God bless !

[@SweetProjectCars]

Glad you liked it Michael! Thank you as always for being here with us, hope you have a blessed week my friend. mad Mike & team

[@mepopkov]

Hi, i would like to try a free sample of the best lubricant. This is the best channel and have been watching for a while now. Appreciate all that you do for the DIYer.

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@erniej3576]

I could use a free sample of the best lubricant out there. Just ordered one of these, pay for itself after 1st battery.

[@SweetProjectCars]

Agreed Ernie!! It's a sweeeeet tool!! Also...... Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@MrWinger1951]

Doesn't a modern trickle charger, if kept on the battery when not in use, do the same thing for extending the life of a battery. I have an Optima battery in a car that is 10 years old and has been on the trickle charger the whole time.

[@SweetProjectCars]

The only thing a trickle charger is good for is when a car is in storage or for a motor cycle. A trickle charger will not do anything even remotely the same as this does amzn.to/3L0yP5v There's a night and day difference. Thanks, have a great day.

[@JamesJournigan]

I purchased the welding unit, plugged it into a 110 outlet. It starting boiling the battery instantly set at 30 as you suggest in the video. The problem is it blows the circuit breakers in my garage within five minutes? And I actually hear noises coming from the panel box? Can you run through the set up of the machine. Maybe I'm doing something wrong.

[@prosperplenty2317]

Could using the welder on a battery like this cause over voltage issues?

[@SweetProjectCars]

We've never had that issue in 20+ years of doing this process. Thanks. mad Mike

[@aldeal3793]

QUESTION , so we don't have to do the 15 min on and 1hr off at 200 amps?

[@SweetProjectCars]

Just follow the video instruction my friend. Thanks for watching, have a great weekend. mad Mike & team

[@aldeal3793]

Just bought the 180 amp version and looking forward to doing the new regimen.

[@EdwardNga]

Awesome video Mike. Over the years I have watched your other videos with the battery charger and the higher priced welder, but this is absolutely amazing. I'm ready to buy now, but I have 3 questions first. 1. I see that this unit has 2 higher options 180A and 200A. Is there any reason I should consider one of them for other use as well as maintain my batteries? 2. Can I do this on a battery that is still in the car safely or do I need to take it out of the vehicle? 3. You mentioned using the unit on 220. Do we have to use it on 220 or will the 110 work also? Thanks for sharing this with us and bringing a great deal to us. I appreciate all your videos and share them whenever I get the chance. 😎

[@SweetProjectCars]

The one shown is all we will be using, due to it's extreme small size and power. It will do any battery that you need to have done, it can be done while the battery is still in your vehicle just remove your cables and make sure you can clearly view the bubbling of the cells, it runs off standard household current. Hope this answers all of your questions, have a great week. mad Mike & team

[@EdwardNga]

@@SweetProjectCars Thanks Mike for answering my questions on this unit. I am ordering it now and look forward to doing my first battery with it. I would love a sample of the new general purpose lubricant that you've discovered. 😎

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@MeAndUs3126]

Hi! I want to try out this new lub formula thingie. Have a great one!!

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@Boondockinit]

Hello, will this work on deep cycle batteries for my boat? Thanks in advance.

[@SweetProjectCars]

This works on all lead acid batteries my friend. Thanks for watching, have a great day. mad Mike & team

[@Boondockinit]

@@SweetProjectCars Thank you "sir", you're a genius...!!

[@fab_It_garage]

Why does the welder method work better than having an old school 200/300A charger start feature? The welder was only set to 75 amps so trying to understand how this method is better than your previous video where you used a car charger. I understand the welder has extra features but IF someone who already owns a high amp charger how does that compare?

[@SweetProjectCars]

After trying and testing both methods, the welder method proved to work better and is more economical for those that don't have the required charger. Thanks for watching. mad Mike

[@fab_It_garage]

Thanks for the reply@@SweetProjectCars

[@bowtierebel68SS]

Also, I'd like sample of the lubricant.

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@daffydavidyt]

Do we need the lower amperage one for the batteries or could we use one of the sttonger welders?

[@SweetProjectCars]

Any of the options will work David! Thank you for watching and asking, have a great week my friend. mad Mike

[@jeffpayne2449]

That’s awesome

[@SweetProjectCars]

Glad to share Jeff! Thank you for watching and commenting, hope you have a fantastic day my friend. mad Mike

[@dyingfromthelying]

You're awesome thank you so much❤

[@SweetProjectCars]

Glad to help Sol! Thank you for the view and comment, hope you have a great week my friend. mad Mike

[@dyingfromthelying]

@@SweetProjectCars glad to help... No, no, no, thank you 😂

[@gmcnelly2468]

Is the polarity positive to positive and negative to negative? (sometimes those welders have the stinger negative)

[@SweetProjectCars]

Yes. Thanks for watching, have a great week. mad Mike

[@PremiumRaizo]

I'm confused. In the two original videos you said you need a minimum of a 200amp car charger / welder. But now you are recommending only 140amps? What's the reason for this discrepancy?

[@SweetProjectCars]

We found a better way!! We are always trying/testing new methods that work better and can be more economical. Hope this helps, thanks for the view, have a great day. mad Mike & team

[@PremiumRaizo]

@@SweetProjectCars thank you sir

[@DJdavefromlondon]

Can this do deep cycle batteries. In previous videos on this tooic you recommended two different welders for regular standard batteries and different welder for deep cycle batteries. I wasnt clear why you needed two so my question is will this welder work for deep cycle ?

[@SweetProjectCars]

Yes you can DJ Dave! This is a new, state of the art welder that can be used for all lead acid batteries. Thanks for watching, have a great weekend. mad Mike

[@patrickdanforth7700]

Wouldn't mind a sample of the healthy lube. But definitely interested in that tiny tool looks better than my soldering iron I used to do that trick with for quick repair of bumper covers. But the welding capability is why I'm interested. As I really don't want to take my vehicle to get my exhaust fixed and rather just do a weld my exhaust pipes. Right now I been using vice grips to hold them together. Since the studs rusted off.

[@SweetProjectCars]

It's an awesome tool Patrick, you are going to love it!! Also...... Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@patrickdanforth7700]

@@SweetProjectCars my tlt has arrived. Have a battery to test as well World Pac group 24 was used in my Land Rover Discovery for 4 yrs. Then kept needing jumps. I did replace it new with an AGM. But will see if this tool can revive this baby. I'll update this channel.

[@onlyme8870]

Update battery is still doing well and doing another one today for a minivan it's an 8yr old battery. As of now it can be jumped then doesn't charge will see after today's 5 cycles.

[@andreafloyd1718]

Thank you for this video. I just received my welder and tried to hook it up to my car battery, but the welder positive lead cannot fit around my round battery terminal. What or how do i fix this issue?

[@SweetProjectCars]

Put a pair of these amzn.to/3r2lT8s on the battery post, clamp the positive to it and you should be all set. Remember, when working outside the box, you need to get creative. Thanks for watching, have a great week. mad Mike

[@tyronegracey6872]

Nice work I have wd-40 and pd blaster if you've got something better I would love to try it could you please send me some to try thanks!

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@user-rd4gz1nc4e]

I got the welder but haven't got to use it yet. Tomorrow nights the night! Also I'd like to try your super lube you like. Thanks

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@missiletm]

Awesome! I just ordered one. My deep cycle RV batteries need a refresh. Will this also work on golf cart batteries? If so, should I do two at a time with the 6 volt golf cart batteries?

[@SweetProjectCars]

This works on all lead acid batteries, and yes, you can do two at a time if you like, no problem. Thanks for watching and asking, have a great week my friend. mad Mike & team

[@missiletm]

@@SweetProjectCars thanks for the reply my friend, I’ve been watching you for years! Love your content brother, keep em coming!

[@mcgeheewoolf2937]

​​​@@SweetProjectCars love your channel. How would I change the process on an 8 volt golf cart battery? Can I do more than one at the same time?

[@harutanaka3647]

I was wondering if I can used lestron 48 vdc battery charger to do the same? Any idea?

[@marinopacentrilli9533]

Doesnt work every time I had old battery and tried many cycles but although all the cells bubbled it still wouldnt go over 7 volts. I will try it on some batteries that didnt freeze. Unfourtunately I live in a place where 30 below is not uncommon and a frozen battery suffers internal damage. If the case is bulged its probably toast . .

[@SweetProjectCars]

This will not work in any way, shape or form on a battery that was frozen, but with batteries that have been cared for that lose their power over time, this will work perfect. Thanks. mad Mike & team

[@lc7975]

Good Morning Mike, bought the machine and turns out the car battery is sealed, same as your motorcycle battery. Are you still planning a video on how to open them? Thanks

[@SweetProjectCars]

Yes I am, stay tuned lc, that video is coming soon! Thanks for watching and asking, have a great day my friend. mad Mike & team

[@stevebraun8217]

I would like to check out some of that lube that you have been talking about. Thanx.

[@bobmiller7426]

Which would you recommend? 140, 180 or 200? Welding sheet metal and frame.

[@SweetProjectCars]

As far as I'm concerned, this one amzn.to/3L0yP5v will work for you, we've welded up to 1/4" steel with it without issue just make sure you have the correct rod and you are good to go my friend. Thanks for watching and asking, have a great week. mad Mike

[@bobmiller7426]

@@SweetProjectCars Appreciate it Mike!

[@e.a.b8278]

You say to connect the welder to the battery but negative cable to negative terminal or negative to positive ? More detailed explanations for us dummies please

[@SweetProjectCars]

+ to + and - to - my friend. Thanks for watching, have a great week. mad Mike

[@AyAy008]

Just ordered one. I have a question. This video suggests five 5-min run - 15 min rest cycles. The original video suggested five 15 min run - 1 hour rest cycles. So which one to follow for a size 35 battery?

[@SweetProjectCars]

Do this video and use it's instruction, with this welder being state of the art it's all you need to do AyAy. Thank you for watching and asking, hope you have a great week. mad Mike

[@geoming3458]

Would we be able to connect it to a running cars battery using jumper cables and do this same process??? Then we wouldn't need a charger or a welder, if anyone could answer please, if possible this could save many people money thanks.

[@SweetProjectCars]

It doesn't have the knock out punch required to wake up the batteries, just follow the video as shown for success my friend. It will still save many people money using our method. Thanks for watching, have a great day. mad Mike & team

[@jeffharrell1874]

I may have missed it, but Is there a need to place a trickle charger on the battery after performing this process?

[@SweetProjectCars]

Only if it's hooked up to something and there's a possible draw from it, for example a battery that's in a motor cycle. Hope this helps, thanks for watching Jeff, have a great week. mad Mike

[@alvarobesnier]

what about sealed batteries? any workaround

[@SweetProjectCars]

You've got to have access to the cells for topping off with distilled water, if you don't have access, you can't do this process my friend. Thanks for watching, have a great week. mad Mike

[@victorzavalazavala1968]

hey Sweetprojectcars, just found your channel good videos, I'm also in Pensacola, anyways you keep saying something about a sample of the lubricant. how can i get a sample

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@captainsledge7554]

hey hey i live in mobile alabummer!

[@SweetProjectCars]

Hello neighbor!! We are about an hour from you! Thanks for watching and commenting Captain, hope you have a fantastic week. mad Mike

[@bruceelwell4264]

Just took apart a 1800 watt battery back up system that stopped working. It had 3 sealed lead acid batteries in it that were very low on water. Tried to referbish them, but I couldn't bring none of them back to life. One had two cells that would boil, but that's it. The other two wouldn't get past 10 volts. I'm kinda disappointed.

[@SweetProjectCars]

Don't be too disappointed, you let your batteries go too long without fluid and now they're toast. Thanks for watching, have a great day. mad Mike

[@bruceelwell4264]

@@SweetProjectCars ok, gotcha ya. I'm learning.

[@jorgeaguilar4984]

​@@SweetProjectCarsgood afternoon sir question so you're saying you have to make sure the battery has enough distilled water throughout the times that you're using it

[@livenfree]

Do I need to leave the caps off or loose while I'm charging it or can I put them back in after I top the battery off with distilled water?

[@bruceelwell4264]

If I operate this off of 110 volts, how many amp breaker do I need. I tried 20 amp and it would trip the breaker while refurbishing the battery.

[@SweetProjectCars]

Watch this video kzbin.info/www/bejne/Z6vCl2WNmtOSi6s it shows you how to set the welder to avoid tripping breakers Bruce. Thanks for watching, have a great week my friend. mad Mike

[@ondrejmitko3671]

Hi, did you put + on + and - on -? I mean from welder to a battery

[@SweetProjectCars]

You sure do!! Thanks for watching and asking my friend, hope you have a sweeeet week. mad Mike

[@Bob-gn8ph]

I ordered through your link but I didn't see any 10% discount code😢

[@veezybee23]

Hey Mike I see there are 3 versions available with different amperages . Which one is used in this video?

[@SweetProjectCars]

This one amzn.to/3L0yP5v will do anything that you put it to veezybee! It's the 140. Thanks for watching and asking, have a great weekend. mad Mike

[@keithmorgan266]

Nice video, and will be ordering the machine next week. Say something on here for the lubricant, or message you where?

[@SweetProjectCars]

Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at [e-mail] with your name and mailing address!!!

[@keithmorgan266]

@SweetProjectCars email sent. Oh, and I'll be in Belleview and Orlando in a couple days. If it was closer, I'd just say I'll stop by and get it. Lol

[@JohnBean-hm1sm]

Can you do it on a battery that is not yet dead?

[@SweetProjectCars]

Absolutely! That's the purpose of this video, do it before it's completely dead. Thanks for watching and asking, have a great week. mad Mike & team

[@JohnBean-hm1sm]

@@SweetProjectCars Mad Mike is the best!🙃

[@yunick1408]

hi i’ve watched your refurbing battery videos from using a 200A charger then the 200A welding machine then this 140A welding machine… my question is after the 5x cycle of using the welding machine what’s next? from the first video (200A charger), if im not mistaken, we have to charge it with a trickle charger after the 5x cycle… do we still need to leave the caps open when using regular charger to charge the battery or do we have to put the caps back on after the 5th cycle before charging with trickle charger? hoping for your reply. thank you so much.

[@PremiumRaizo]

I'm just taking a guess but i would think you would put the caps back on and then hook up the trickle charger to it.

[@Bob-gn8ph]

​@@PremiumRaizogood guess

[@obbzerver]

Great info. Wear a respirator when you're creating plastic fumes like that - not good to breathe in.

[@yunick1408]

should the water level be at below the cap always and even after the 5th process and before trickle charging? and also when already using a charger, should we still keep the cap open until fully charge? thanks

[@TheCrozenfox]

That welder has much more voltage than the battery. Isn't it destroying it ?

[@Susan70003]

The ammo belt on the Armadillo?

[@SweetProjectCars]

LOL, I got him when I went to San Antonio a few years back to watch our youngest daughter graduate from Air Force boot camp. Isn't it cute :) Thanks for watching Susan, have a great week my friend. mad Mike

[@luismayen3542]

So my battery just died. Will only start the car with a jump. I just bought the welder. So now do I empty out the battery acid or do I keep the same acid and just add distilled water and hook it up to the welder? What is your suggestion. Start with fresh h2o or keep what's already in the battery? Thaks so much. I love your content.

[@cali_cal]

did you find the answer?

[@wintonbowman8789]

What would be the amount of time with this welder on 120v.thx

[@SweetProjectCars]

Please re-watch the video a few times and listen carefully, also, watch this additional video kzbin.info/www/bejne/Z6vCl2WNmtOSi6s it has some important information about this method. Thanks for the view, have a fantastic day my friend. mad Mike & team

[@tmos70]

Any technique for AGM batteries?

[@tmos70]

Never mind. I just read it's not. Great video.

[@SweetProjectCars]

Sorry buddy, this works on lead acid only. Thanks for watching and asking, we really appreciate it, hope you have a fantastic week. mad Mike

[@bigmac3049]

This is more of a sales pitch

[@SweetProjectCars]

Glad you liked it! Thanks for watching, have a stupendous day. mad Mike & team