Easier to see leaks when you keep stuff clean and wiped down. Also a lot nicer to turn wrenches on a clean machine.

Sweet Project Cars! Does Julio know how to get mold out of a cloth headliner? Gracias!

"Warning" Never clay bar your Rear end - You'll slide right out of your Pants....Thanks SPC!!!

Great Job. I did my lexus seats over. I Used a latex paint match from the store to touch up the dash. It has to be thinned though. I apply it with a small foam roller, As it dries if there are any streaks you can just keep rolling them out. They tell you not to thin latex with water, but it works, I did and it didn't make any difference. I think they tell you that so you can't stretch your paint out and have to buy more. I use the 99 like you do to prep. For the seats I used a latex you can get from companies that sell it for re-coloring your seats. Yes it's latex, because latex has good stretch to it. I fill the cracks and holes with a good paintable latex caulk and sand it to smooth it out before applying any color. If you have a split in your seat you take a piece of vinyl larger than the hole and glue it backwards rough side up underneath with a good flexible glue (I forget what glue I used) before you fill the hole. It turned out nice. Just take your time and do a good job before painting it.

Miss the days when your headlight was just a bulb to replace .

👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

Did anyone else see jason from friday the 13th lmfao

Do you think a 50 AMP Start charger will work vs. a 200 AMP one ? I have a 50 amp one. 😀😀😀😀😀

By the yard it is hard but inch by inch it is a cinch. ( I'm STILL happy Trump won ! lol )

Do you know how to do this for EV batteries?

Wow. Wish I would've seen this earlier today before I took in my trusty 12 year old Kirkland battery as a core charge for a new Walmart Everstart battery. Would have loved to keep that old one going. Anyway, so basically you're just cleaning the plates inside via electrolysis? So if the plates shed off a bunch of junk in this process, where does that junk go? Does it just stay in the fluid? Do you need to change the fluid out afterward?

I've been using a clay bar for a long time now....works wonders. I also like a quick wax spray....shines like a new penny. I like the Corvette....great car.

You aren’t worried about the off gassing? I’ve heard horror stories like explosions and such. People getting hurt badly because of this. I know you would want a well ventilated area, such as outside. What type of charger should I be looking for? Non digital, any recommendations?

I'd like to see how the window slide in a couple of weeks or month, when this lube will dry out.

Thanks, Mike! Is it necessary to use a separate iron remover or will the clay bar take care of that? Thanks again.

Well Mike, I claybar our 2 cars every 3 years. Most people won't believe the BMW is 16 years old. Thanks for sharing. Dutch regards Nico.

Cesium oxide

How many of you think he 'caught' the clay bar before hitting the ground??

Great video! How can we get the spray?

Hiya', Mike! This the 2nd time we had a blizzard here in southeast Georgia in 7 years (2018). The last time before that (here) was about 1989!, *36* years!

Good video, thanks for sharing, YAH bless !

Mike, so I work on guitars. Restrings especially. Lubing the bridge & nut is a forgotten step for many & causes tuning issues. I used to use 3 in 1 oil & it was “ok”. The lube you sent me does an unbelievable job at this. Best I’ve seen ever. Just a hair in a wick tip & it’ll last a LONG time. Thanks again.

What products are you using. Where to buy?

Totally awesome you never Cease to amaze me Thanks Mad Mike

Hello Sweeeeeet project cars! Are there any lubricant samples left? Checkin in from NJ

You're a resourceful guy, I bet you could invent a good clay bar holder. One that is easy to hold and won't drop the clay bar on the ground.

Correct me if I'm wrong, but shouldn't you apply wax after claying the car?

I had a car clay bared in Boise about 10 years ago. I'll swear that fine silk was rougher than the paint when they were done. It only cost me $30, and it was worth much more than I paid. I'm going to do it to my three cars soon. Thanks for the video to remind me about the clay bar. I have watched every one of your videos and really enjoy and learn from them.

Can this be done with a 55A charger? I was thinking maybe leaving it hooked up for 30 minutes at a time instead of 15 because I only have a 55A charger

Looking good! Sweet ride!!

I need some

Your an amazing dude

Fun he says 🤣🤪👀 Reminds me of Tom Sawyer having "so much fun" whitewashing the fence that he gets his friends to pay him for that privilege.

What year Vette is that? It's really nice looking!

What is your opinion on the clay mitts?

Nice job Mike..look forward to videos on the Vett. Where is the Blue Bomber?

Do you ever use an iron remover first?

Awesome! Can I leave my Jeep with you there in Pensacola? 🏆🧽 🧼

I followed SweetProjectCars original ceramic coating video instructions from years ago on my then new Dodge Challenger. I followed all the washing, clay bar, and prepping instructions and then used Armor Shield IX as advised. Almost 7 years later the rain beads up on it like I just waxed it the day before, and the dirt and pollen slide ride off it. Best investment of a hundred bucks and a Saturday ever! Thanks SPC!

Clay bars are amazing. They also work amazing for getting all the crap that wont come off windshield normally.

Again, nice Vette! After 20+ years of ownership I've been debating on selling my current fun car, a 1971 Triumph TR6, for something with a few more HP and more legroom, and the Corvette is top of the list.

Going to loves seeing this series. Thanks for showing us how to Claybar your paint and how long it takes. Say how is the Blue Bomber coming along?

Sweeeeeeeeeeeeet!!! So Mad Mike how long would it take you to clay bar an Extended cab F-350 🤔 I can be there in about an hour...😜

Hello To all our AWESOME Subscribers and Friends! Here we share, How to have the shiniest paint ever! You will not want to miss this NEW series as we compare the top to 2 Waxes against each other and we also Share between Stare of the art Waxes V Ceramic coating and which will work best for you in your World of driving and weather conditions. Thanks Mad Mike Quote of the Day! *Anonymously perform acts of kindness, expecting nothing in return-not even a thank you*

WHAT DO YOU DO IF YOU DO IT 5 TIMES AND 1 CELL STILL LOOKS WIMPY AND REALLY NOT BUBBLING ???? MAYBE DO SOME MORE 15 MINUTE CYCLES ????

Does this product can wipe out a crack my leather seat and what about using filler?

So the 2 items used in this video was the "Lithium gloss sauce wax red bottle" And the "Seal & Squeal Sealant/Polish blue bottle" right?? Looking to place order and seen they aren't stocked. Where can i buy?

Fit another battery in series, and they WILL REALLY ZOOM for a short while! SO faster than WHAT EXACTLY, WHEN new?

What about agm’s?

Have you ever used a 250 Amp manual charger for this process?