Episode 42 - APPRENTICE TOOLS - 13 Tools Apprentice Electricians Need To Have

[@michaelfilippone5576]

1. Linesman pliers 2. Needle nose pliers 3. Diagonal cutting pliers 4. Wire strippers 5. Channel locks 6. Screwdrivers 7. Precision screwdrivers 8. Keyhole saw, Sheetrock knife 9. Good tape measure 10. Flashlights, headlamps 11. Hammers 12. Roto splitter 13. Utility knife Also get protective eyewear and electrical tape

[@jasdeepchima1683]

Gp

[@shawn2108]

Cap on needing the rotosplit. Just use dykes

[@youtubeendorsesleftistprop4304]

Roto splitter and safety glasses and electrical tape better be provided. Or find a new place of employment.

[@ereyes5793]

@KZbinEndorsesLeftistPropaganda ppe and tape sure but rotosplitter is something you should get if you work on mc alot

[@thunderbolt5354]

@@youtubeendorsesleftistprop4304 As in NECA Union Electrical Contractor who Use IBEW Electricians and Apprentices

[@jondowd11]

Back when I was an apprentice my journeyman stole my sheetrock saw and broke it trying to cut into a sheer wall. I ended up needing a sheetrock saw later that week but hadn't replaced it. I had a wood cutting Sawzall blade and some 1/2" EMT, so I flattened out one end of the EMT, place the blade on the end and drove a tech screw through it to hold it in place. I cut and filed the end of the screw and wrapped the handle with electrical tape. The thing has worked so well that I've been using it for over a decade now. I call it my prison shank.

[@pixiedragon5085]

Hell yeah man. That's what it's all about. Ingenuity. Very nice yo. Very nice.

[@njohn72ilovemusic]

That is so ridiculous in the best way

[@Bryan-df7kc]

This is definitely what i want to do for life and i just want to say how much i appreciate your content. Many people would rather not share their knowledge and keep you in the dark, thank you Dustin for being the light!💡

[@ikerivers1795]

It is a very cool job with many different paths available. Good luck Brother Electrician.

[@diegosphone40]

How’s it been going man? Tomorrow I start my electrician helper job which mean I’m getting trained to be one, I decided I want to do this with my life too but have no experience what so ever, I’m a little nervous.

[@jrg116]

Tom Garbo That’s real cool of your dad to do that. I feel like it’s like that now kind of hard to get into if you have no experience a lot of the old timers don’t want to teach the young guys

[@subscriberswithnovideos-kj7ne]

whatch this cool video! kzbin.info/www/bejne/paWxnZalbLWSnKM

[@donm2067]

My entire apprenticeship was the owner trying to keep me as uneducated as possible for as long as possible, that way they can deny you proper wages, plus they see you as a future competitor.

[@tonyfisher6379]

Sharpie markers, carpenters pencil for the residential guys, “hot stick” - non contact tester, multi-meter, and take your time picking out a tool pouch that you’ll be wearing. Great video 🔥

[@arnieselectric007]

Strippers aren't expensive, lol, at least in the tool world...lol...That was a good one...

[@abdulelkhatib2674]

4:46 there's a lot of different strippers on the market 4:53 some of them are like several function 4:54 some of them are different sized holes 7:42 strippers are not usually that expensive

[@wwetnafan1998]

As a apprentice the only klein tool I bought for a very reasonable price was a stripper

[@chiarapetrachi6834]

lol

[@Tre16]

@@wwetnafan1998 Klein is junk. Knipex is king!

[@thunderbolt5354]

@@Tre16 I can tell You are Non Union !

[@ronniemartillo]

Loved the video, as an apprentice I learned not to go cheap on tools. The more expensive the longer they’ll last. This goes for boots and pouches as well.

[@THEBILL1993]

Boots are definitely not something to be cheap about

[@jamesipad204]

You forgot the most important tool.... an alarm clock! Don’t be late

[@awickedtribe]

My number one Rule...

[@Bill_Sawyer]

That's funny. But I do agree.

[@ElectricianU]

hell ya you're right...some people need 2 of these lol

[@eddiew2325]

James iPad I’m late to work everyday lol

[@cedmoe2670]

Of your ass al be fired 😆

[@marcelp7059]

Pair of Klein’s are also a hammer👍🏻

[@smarmylad9617]

That's the only reason they make their way in my bag. Useless otherwise.

[@submaxcw7947]

No

[@michaelofmanitoba3844]

you're an electrician sir. everything is a hammer.

[@danielllanos653]

Im the one that doesn't believe in this 1 sorry bud

[@AlexDenton0451]

@@michaelofmanitoba3844 bullet is hammer if you are accurate enough.

[@LeonidasBorgesEletrica]

Very good! I'm passionate about tools. And I really like the American electrical system

[@matt59fire]

I worked with a guy from Guanajuato. I watched him run sprinkler wire from 120v led fixtures about 1/2 in underground direct burial 🤣. I dont think he was a good mentor for me as an apprentice

[@Not_Petya]

me too

[@davidboman7395]

Lmfao “I really like the American electrical system”🤣 You gotta be kidding me?? Metal boxes and cables inside walls, yes very nice system smh🤦‍♂️🤦‍♂️

[@matt59fire]

@@davidboman7395 Inside walls we typically use plastic.

[@matt59fire]

@@davidboman7395 Im surpised you think that is all there is to it.

[@goinbananers]

Being an Industrial Electrician for 35 years I highly recommend Channel Locks #410 or #414 parrot jaws. they lock down on conduit without really having to squeeze the handles much.

[@ShingaiRyoku]

FYI: All Klein hand tools that aren't ratcheting have a lifetime warranty so get a couple of those extended multis with the breaking flat-blades and just swap/send the broken one in when they fail you. That said, I have found the #1 squares to be effective for residential switches/recepticles. I always worry about overtightening anyway so the reduced torque keeps me in check, I feel like. If you get this far, thanks for reading. I'm a first year union apprentice and I can't even begin to tell you how much your channel has helped me. I take the learning process a bit more seriously than most of my peers and you have a very cohesive teaching method. Sincerely, thank you.

[@kaibaCorpHQ]

What union are you with? IBEW? What was the process like for you to get in? I'm just wondering because I'm looking into IBEW and their schooling to become an apprentice. Wish you the best in your work.

[@ShingaiRyoku]

@@kaibaCorpHQ Yeah, IBEW Local 26 out of DC. I'm a Residential Worker at the moment, still trying to get into the Apprenticeship program. Applying for the A Program required a copy of a high school diploma or GED, a sealed transcript verifying that I'd passed Algebra I, and a copy of my license. Then there was an aptitude test and upon passing that, an interview panel. There are always a lot of applicants and limited spots though, so don't get discouraged if it takes a while to get in.

[@studiompodcastnetwork5119]

Check out the new ECX drill bits from Milwaukee. They changed my life with working on residential switches/ receptacles screws. I discovered them by mistake when I ordered a set of extra bits for my Milwaukee 11-in-1 screwdriver and the ECX bit was included.

[@richardmancos5510]

Actually, all Klein tools even the ratcheting are covered under lifetime warranty. I have warrantied out my ratcheting cable cutters twice, and both times was from me doing dumb shit like cutting stainless steel cable and dickering up the blade. Klein tools are superior to all and anyone who says different is a hack! 😂

[@chickenfixn4439]

I want to switch from being an auto tech to electrician and its really nice knowing that the thousands of dollars Ive spent on tools wont go all to waste. I'm sure my electrical knowledge I've gained from the auto industry will definitely help me in my beginning stages. I just need to find a company to apprentice for now!

[@Penguin545]

You ever make the switch? I’m apprenticing in commercial electric after 13 years as an auto tech, more than doubled my take home pay from day 1 due to traveling and working 60 hours a week plus per diem.

[@chickenfixn4439]

@@Penguin545 I never did actually. I shortly after became a GM of a shop and then about a year and a half after that I went back to bein a tech. At this point I make over 70k a year in my position rather than 40k at the previous company. Im not sure if I will leave or not at this point because I do love working on cars and I know it so well

[@Penguin545]

@@chickenfixn4439 I hear ya man that’s not a bad living by any means- I did $56k the year I left at $26/flag hour. I just found all the frustration of flat rate and warranty to be absolutely demoralizing- there were so many situations where you would just get the short end of the stick due to factors outside of your control. I’ve found working hourly plus overtime to be so much less stressful- my wife comments all the time that I’m like a different person now. Anyways I was personally able to negotiate a higher than normal apprentice pay due to my extensive credentials as an auto tech- my employer agreed that the skills would definitely carry over largely and they certainly have. We have 19 year old apprentices that can’t drill holes or read a tape measure so I’ve got a big head start compared to them. I’d certainly think about it if you’re ever given the opportunity. If you don’t know any electricians try asking around to friends and family or consider applying at a local IBEW if you’re on a union area. Good luck 👍

[@chickenfixn4439]

@@Penguin545 Yeah Im also getting my ASE certs right now which will continue to up my pay rate. I can easily make 100k after becoming master certified. Im not struggling that much

[@misfitsman805]

You can buy the replacement bits and barrels for the Klein 6 in 1 tools. Klein part numbers: 32400, 32401, 32395. I believe the bits come in a pack of 2.

[@chrisfyfe4047]

The stubby Klein 6;in 1 is good to have , lots of guys don’t have much restricted access drivers .

[@mattm7535]

Klein has a whole section for “replacement parts” online. Pretty much any tool part you can lose or damage is available. They might even send out replacements if you send pictures of a damaged part/tool

[@eddiew2325]

Matt M hey Matt it’s me I love you

[@mattm7535]

@@eddiew2325 Oh, it's you. Good thing, otherwise your comment would be super weird.... almost creepy. But hey, you do you.

[@alexhelie4941]

Majority of supply houses carry them

[@jakel.1724]

“There are a lot of different strippers” My wife never looked up so fast.

[@mthompson965]

Gotta love em strippers!

[@apacalyptic1freelancevideo213]

Thanks to who for letting you how to use a stripper . and yes there not only on line!

[@666thprayer]

Oh man, just wait till you watch the vid on 3 ways.

[@abdulelkhatib2674]

@@666thprayer and illigal 3 ways

[@abdulelkhatib2674]

4:46 there's a lot of different strippers on the market 4:53 some of them are like several function 4:54 some of them are different sized holes 7:42 strippers are not usually that expensive

[@missknb]

I staff electricians for companies and I'm glad I found your videos! I have a huge issue with guys coming in and saying they are journeymen when the are at best level one apprentice. Thank you for your help!

[@garbo8962]

Had a know it all young sparky that had 5 years expierance. Could not run conduit or know how to wire in a start stop pushbutton. Second week on job he expected to get a paid day off for his birthday. Company got rid of him before he even worked a month. Also as with most lousy workers had all low quality hand tools and not many if them.

[@jdshear01]

Granted I just started following your channel but I'm surprised Olight doesn't sponsor you. So far I'm loving the channel, straight to the point, real, and no filler and fluff. Thanks for the hard work you put in to creating your content!

[@opietwoep1247]

I did residential electrical work in Cook County IL in the early 90s. This brings back memories, I miss this line of work

[@codydouglass242]

What Udo doing now sir

[@Conqueef-tadoor]

I already own every tool on this list, except for the Roto-splitter. I love my 11-in-1 Klein screwdriver, it has several flat, Philips, #1 and 2 square, T-15 and T-20 torx, plus 1/4", 5/16", and 3/8" nut drivers. 👍 I also have a a 5-in-1 Klein precision screwdriver that comes in VERY handy on small screws.

[@richardgarcia6108]

I like your channel. You do an excellent job of explaining many of the concepts in the electrical world. FYI I’m a retired secondary math teacher now turned into a handyman who has independently studied and practiced residential electrical work for over twenty years. I now have thousands of dollars worth of high quality tools, mainly Kline’s. Anyway, short of an amp meter or mutineer I think a non-contact voltage tester was missed. I know they have their drawbacks but in most situations it serves as a double check against accidentally working on live wires or blowing out your dikes or linesman. There’re not that expensive. There are plenty of models out there with all sorts of features. A basic Kline or Fluke model would suffice. Thanks for what you do! TTL.

[@ElectricianU]

Thanks for watching my friend

[@christianmullis9263]

Dustin! I want to thank you for all the information you have already given me. I'm taking my classes next month and wanted to get ahead. You have been a big help with that. Much love from Chicago!

[@mattmichel1068]

I’m in trade school right now. Loving it and I can’t wait to get into my first job. Keep up the awesome vids bro.

[@NonStopActionJDog]

Where are you at? You become a apprentice then go to trade school here

[@JohnWuWei]

The Southwire Rotospliter was one of the best purchase I made working in Commercial. The blade is still good after going through 2000ft of 12/2 and 12/3 bundles. Always keep a spare one handy.

[@darthcollosus]

The contract I just started working for bought me one of those it works pretty good

[@marks6663]

the #1 square is used extensively in electrical in Canada. The terminal screws on outlets and switches are that. Also the screws that fasten the device to the box are also #1.

[@ikerivers1795]

Once I got into Power Plants/Industrial I learned a saying...."The smaller the screwdriver, the bigger the paycheck." As I have progressed in my career, I have used my linemans less and my needle nose more.

[@TylrVncnt]

Haha that’s a great saying! More or less very true!

[@ikerivers1795]

@@TylrVncnt Yeah, I make a lot more money working on Protection Relays, AVR's, VFD and control wiring than running conduit, installing boxes/devices/panel, or wiring up motors.

[@danielllanos653]

It's true

[@williamgrand9724]

"Which leads me into #14, you're gonna wanna get yourself a good samurai sword, now your probably thinking this is a bit overkill but they are really good for demolition."

[@juliolopes2892]

And collecting on unpaid jobs.

[@wb5mgr]

The one thing I saw missing from this list that you really need as a tradesman is a level. For checking square and plumb on enclosures, for bending conduit, for all sorts of things. As an apprentice an inexpensive $6-10 9” level is what you need. As you do more commercial work it makes sense to invest in a model that can clamp onto conduit for doing bends like a Klein 935AB4V . Also if you do a lot with EMT a conduit reamer (Klein 85191) or a reamer bit ( Klein 85091) is a nice tool to have. I checked, the southwire model SCDFR actually is cool because the bit can be removed and used in a drill, so it kinda has an edge on the Klein if the quality is up to par.

[@kevtony1490]

I just started my electrical training and Im learning alot! Thanks 4 sharing!

[@dispm3324]

Liked the jokes around knives😄 My boy! I’m a country girl and find myself needing a pocket knife all the time, especially now when I have a toddler who likes to snack on fruits while in his carseat.

[@conornaughton3819]

Woah I get the fact that he might be messing up the car with the fruit but no need to pull a knife on the poor boy

[@stevenwilliams6638]

Thanks man I'm getting into it later in life (I'm 40). Nice to know I have all the tools I'll need to get started.

[@ottoroth9377]

With those precision screw drivers...the way you held and turned them an smiled....brought out your MR. ROGERS to a degree. Lol

[@Penguin545]

Oh top tools def. a phone charger chord and portable power pack- that way when your battery is running low from playing on your phone near the end of the day you can charge it back up and never miss a beat- your journeyman will really appreciate your ability to think ahead and anticipate problems. With any luck he’ll mention your good thinking to the boss and you’ll be a front runner for the next big step in your career 👍

[@DogeatDog54]

How about a triple tap for chasing half-assed threaded hole in boxes?

[@robertnicoll7623]

I'm starting on my path to be an electrician just by watching and studying all your videos. Thank you so much man! Can't say how grateful I am. On a separate note, I am sick of reading all the comments about people complaining about foul language. Get the f*** over it honestly. You're a straight up dude. I definitely owe you a drink or a blank check with my name on it :-)

[@ElectricianU]

Blank check please...I can't pay my mortgage with a drink. lol - and for the comments, I don't even pay attention to it man, there are always haters out there and people that think I need to do things the way THEY see fit for their world view. I've got my own, and I'm just gonna keep being me. Thanks for the support though my friend. Means a lot

[@Christiones]

Currently looking around In Home Depot, so far no one knows where the swords on the back are. I’ll keep trying. (; Love your vids man I’ve been loading my brain with knowledge. Thanks for your teachings man!

[@crashnburnps3]

As for flashlights my personal favorite is the mag light pro, compact rugged and takes actual AAA batteries that last a while. Had mine for a few years and even worked outside dropped in snow and works great. Even has a little nylon holster for the belt and is relatively bright and inexpensive. I really like it has the iconic twist heat for turning on. I have has so many with a multifunction switch and they never last.

[@Mjolnir_27]

All Pliers : Knipex All Screwdrivers: Klein Power tools: Milwaukee

[@joshbenton810]

K W pliers: klein Screwdrivers: wiha Power tools: dewalt

[@CaseyDresser510]

I was with you until the power tools. I think you spelled Makita wrong...🤣

[@alancast6000]

Haven’t tried knipex can’t get them in Home Depot but Klein all the way and powertools, MAKITA only

[@jayholmes5775]

@@alancast6000 certain home depots carry Knipex if you look on their website you can find stores that do atleast in South Florida they do

[@eds6569]

@@alancast6000 Makita used to be top of the line, ya need to go red if you can afford it now though, all of our crew has been slowly transitioning to Milwaukee.

[@bubbly6379]

Something I'd add for those of you getting into it, a set of nut drivers. I use these almost every day doing different types of strapping.

[@TonyMontana-fs3lu]

#1 square screwdrivers are great for receptacles

[@eddiew2325]

Not really I just found out they’re phasing it out because they don’t provide a secure tightening

[@eddiew2325]

Hi Eddie

[@elvesgabriel5559]

nice man, i'm brazil, and i've been workink like as eletrician and study english, now i'll learning english and electric with you!

[@stuffguy7]

Try using a #1 square next time you do outlets or switches. Most brands these days accept a #1 square for the terminals and yoke screws. Way less likely to cam out than a #2 phillips.

[@christopherharpster9330]

When I was going through, I remember the best advice I got from a master...look busy. If we had down time, even he would clean stuff up. Now at work we have a few apprentice coming through and I told them that. Usually the ones that work consistently are the ones that stay on the job the most, even when other guys are getting drug up.

[@christopherharpster9330]

And I will give another option for #9 that's held up well for me and helped me greatly, and very affordable. My wife actually got it for me for Christmas as a stocking stuffer during my apprenticeship. It's a Hart tape from Walmart of all places. What I like about it is it's double sided, and on both sides it has your measurements down to 1/16. I can't tell you how many other guys I went through had trouble because they couldn't understand measurements. I actually bought my son one this year because he's started votech for HVAC.

[@ericbrown9201]

Awesome vids man! You can put some loctite on your tape measure belt clip screw, should hold.

[@spudatbattleaxe]

I too have an obsession with flashlights but my favorite one right now is the Milwaukee pocket rover. Its a little floodlight that hinges and has very strong magnets and a clip. All the guys that see it at our different jobs are impressed with it. When I bought it there was an errante for a free spare battery and charger too so that was nice. I hate using headlamps and this light has been working awesome for me. If I’m working above ceiling or in a dark panel room I can just attach it to any metal object nearby and it fills the whole room with light

[@trundlemae]

Unilite torches way to go bro!!!

[@panda8bamboo161]

I feel like, a drill (with hammer function) and an impact should be included too. Used waaaaay to often.

[@kieranwilliams2080]

I’m sure he feels like those are very important but he said hand tools specifically.

[@blueskies4715]

Good Video. I'm training about my 14th apprentice right now. She's got a year under her belt. Disappointed you didn't showcase the 11-in-1 Multi-tool. #1 and #2 Flathead and Phillips, #1 and #2 Square Tips and Star Tips, 3 different hex head drivers. #1 Offset Flat Head screwdriver (squiggly) is great for exploratory holes when planning out recessed lights in ceilings or remodel boxes in walls.Use it as a drill and extend it fully in the hole and you can spin it to locate joists and studs. Don't buy the one that has replaceable bits, the head is too big. Non Contact Voltage Tester. This is an indicator tool, don't always trust it. They can give false positive and negative results. 18V Battery Powered Tools (Drill, Sawzall, Multitool, Lights, etc... Most of my work is residential remodel so 95% of my needed tools are Kleins, Strippers, 11-in-1 and buzz tester, plus a roll of black tape and reds in my back pocket. Again, great video, I'm going to recommend my apprentice check them out. Blue Skies.

[@SantinoP619]

Looking forward to my new journey as an apprentice, picked up my first haul at Home Depot and still have a lot to buy.

[@bradywassam5232]

How much did you spend for your first set of tools?

[@joshcowart2446]

I’m a plumber and I never carried an 11 in 1. This is possibly because of the guy I learned under. Also there’s times when you have to have a straight shaft to get into some holes. Anyway I finally bought the Klein 11 in 1 and love it. As for losing pieces, I’ve found that you can buy all the parts on Amazon individually. I’ve done this rather than spend $20 to replace it

[@objective7042]

Thank you for this video, I got accepted to my local union. Wish me luck in my new career.

[@nickballard3314]

As an apprentice? How I been waitin forever!!

[@nickballard3314]

Congrats

[@latashaduncan6071]

Good luck! Waiting for mine to start accepting applications again.

[@CASH-TO-THE-MERE101]

Danny 👍👍👍

[@Berbs73]

Congrats! I got accepted when I was 18. About to get my 25 year pin at the next meeting. Best thing I ever did.

[@danielgeng2306]

The screws that have a robertson and slotted heads are ECX which Klein makes as well, really gives you a lot of torque and very little chance of stripping the head or slipping.

[@farmerdave7965]

You've sold me on the crocs. I'm getting a pair. Someone has finally made the handle curve correctly.

[@fuelediowa]

One of those little torches, great for heat shrink, and has the little soder tip works great for little quick jobs.

[@thepeter3116]

Knipex diagonal cutters are the only brand that is worth the money. I recommend the 10" version.

[@TonyMontana-fs3lu]

thepeter I agree but the 3 size kit

[@jonathangarza3613]

Where do they sell them?

[@veganlvl5202]

Yeah man my kliens dont even cut 14 solid. They are brand new and just dont do any work. I shouldve never bought klien pliers

[@the74impala]

Amazon has them

[@banehogs5589]

Vegan LVL5 i prefer knipex over kleins but i have the red handled "journeyman handle" klein ones with the angled head and they actually cut pretty well?? If yours cant cut 14 solid something is horribly wrong or youre weak as hell no offence lol. Mine cut all 3 number 12's in romex at once, cut that thick metal wire that they use to hang up the ceiling grids, etc. can cut small ish hardened steel nails and whatnot. If you dont have a good pair of linemans i HIGHLY recommend knipex

[@wizard3z868]

up here in the northeast i use a lot of mc for basements and garages tht roto splitter was given to me when i left tech school and has served me well for over 20yrs

[@trevorv8860]

i agree with you on the drywall saw (what we call it in canada), i had a milwaukee one and it bent like crazy after using it only a few times.. buy quality or buy it over and over again

[@zechthompson7688]

Trevor Voisey quality over quantity, that’s what I say!

[@JoshCowley]

Michael Scott would have had a field day with this video lol. Excellent, info. Thanks!

[@Gruntled2001]

Love your vids bro!! 👍🏼🤝

[@mathewshoyt1763]

Dustin, you sir are an awesome instructor

[@321itsdone5]

Nice video. I'm a master electrician I shall have my apprentices watch this video. I like my Ideal electricians hammer with a long neck. I also like when my guys carry swivel screwdrivers, they are fast and they are easier if the human hand. Here's what you missed- magnetic level, 2 sharpies, and hex key set.

[@kleanupguy141]

I don't know if you'll ever read this comment but you were talking about flashlights especially head lamps I've been using a neck light made by snap on and I really enjoy it, you can point it where you want, it's really light and i even forget I have it on me. I think I bought like 4-5 of them and gave them to members of my family and everyone really likes it.

[@kleanupguy141]

ECHDC038G this is the part number for the green one

[@mitchellarmyguy2515]

2:44 "i think thats a bad idea but I've done it" -Every tech in the world

[@jamesf2697]

On the measuring tape, first thing take the screw out, apply locktight and reinstall. 😉. For the keyhole saw there are 2 that I like milwaukee has one that folds and uses sawsall blades, the other other I don't remember the name anymore but it has teeth on both sides and is a beast.

[@michaelkeysor9852]

That tip you keep breaking can be bought on amazon. I order my combination bits for my 11 in 1 there

[@dank9139]

Klein💪 I’m a food service technician most of the work we do is high voltage electrical I have Klein everything insulated grips keep ya safe

[@jdreynolds29]

I don't want to be picky here but since this video is for apprenticesand information for them to know what tools to get they need the correct information so that when they are searching out the suggested list they find what they're looking for. On channel lock tongue and groove pliers it is not 11 inch and 9 in they are 10 in and 8in. Also on the screwdriver recommendationit wouldn't be a high-leverage screwdriver it would be a demolition flat blade screwdriver or demolition slotted screwdriver depending on brand will determine whether or not they listed as slotted or flat blade. #Just saying

[@manwells7019]

Depends on your environment.. maybe make your own video for comparison?? Cause I work in the commercial side of Electrical and I've never heard of "demolition blade" anything..

[@expfcwintergreenv2.02]

I’d recommend the mini Klein flush-cutters, D-275-5. Cuts up to #16AWG solid conductor (I have cut #10 stranded no problem), then can be used to score and strip the insulation. Cuts zip ties flush so there is no plastic dagger left sticking out for the next guy. Fits in a shirt pocket so you always have them. Also great for job site manicures.

[@sikox209]

I miss my buck Mesa knife😕 that was my perfect knife, it was fixed and had a kydex sheath( I think that’s how it’s spelled, correct me if I’m wrong/ misspelled it) with a belt loop and I would always put the sheath upside down on my belt and tighten the sheath so the knife was firmly held. It would conceal it more. I also stained the handle to appear darker because originally it was a light gray. Sadly I don’t have it anymore because I forgot it at a job site right before it was time to leave it was. I had started that shift at 3 am and it was 6pm and I was tired and frustrated to I didn’t notice that I had left it on a tractor and left home. Well the next day I entered at 5am but my coworkers had entered at 3am and no one even saw the knife... 🤔

[@anatoliygolub5609]

I showed up day one with a belt, impact and drill and an assortment of listed hand tools in this video. finishing up second year apprenticeship with a packout tower taller than me lol. have more tools than anybody in the company. it's an addiction that is also a great investment

[@illestofdemall13]

Waiting for the new Klein Electrician's Sword to come out. Lol

[@tylerkane4559]

Excellent video, very informative. Thank you!

[@colebrown8093]

I really like my southwire 12 in 1 screwdriver and my Milwaukee 6 in 1 strippers. The screw driver has most of the types of drivers I need and the Milwaukee is a needle nose with strippers, small screw cutter, and curved cutters which is great for bigger wire. Also I love my 25' magnetic fatmax. Especially when running conduit.

[@totallyawesome80s55]

I know you aren't fond of the 11-in-1 screwdrivers, but they have square bits and torx bits. Just saying. They're pretty handy and I've never lost a bit.

[@thms4771]

You forgot the torpedo level. Just saying.

[@richardcranium5839]

an old brick layer told me "just pee on it. the side it runs off is low"

[@CASH-TO-THE-MERE101]

Ringo Wayne 👍

[@RobertLeBlancPhoto]

I've seen people use the level app in their phones. :/

[@caden01691]

Two of them preferably.

[@davidjudd221]

Dingo Wayne, he was going to cover that, but he torpedoed that idea.

[@peehandshihtzu]

The wobbly screwdrivers for putting on covers and plates during the trim phase are a must have also. Not to mention the claw/grabber drivers that hold the fastener on the tip so you can get it into places on handed that you don't want to drop a screw are great too. I always liked to have a punch, a sturdy all, wide blade stubby screw drivers, a nice magnetic grabber, an inspection mirror and a few crucial sized stand alone nut drivers and don't forget your stand alone crimpers and tape. :)

[@ManShellz234]

Starting my apprenticeship in August, so glad i found you vid. Keep the goodness coming 👊

[@bakerboy8910]

My top tools for an apprentice, in no order (my brand) 1) Ratchet cutters (Klein) 2) 11 in 1 screwdriver (Klein) 3) Cable cutters (Wiss) 4) Impact driver with 5/16 and Phillips (Milwaukee) 5) Sharp knife (Morakniv) 6) Muck boots (not a tool per say, but you'll want em) 7) Tape measure (Komelon) 8) Super 33+ (3M) 9) Channel locks (ChannelLock) 10) Headlamp (Bushnell) 11) Vice grips (unbranded) 12) Brick hammer (Estwing) 13) Cold cut chisel (unbranded) Sources: first year apprentice

[@user-cg9vp9bf5d]

Komelon lol

[@pedroM707]

I have most of my tools I’m a 1 year apprentice but working on gettin all my tools together so when I head back into the field with my next company I’m ready for whatever comes my way

[@T6Tarek]

I'm a huge fan of the electrical tools milwaukee has out. The strippers are amazing, needle noses are stout, and so on. I still enjoy all my klien tool but I'm slowly getting converted to a full milwaukee fanboi lol.

[@brianhorton4501]

Milwaukee is a good brand for hand tools better than Klein the one tool he forgot was the voltage sensor the only tool that can save your life

[@djhutchins8873]

their drills suck dewalt and kobalt got them beat, especially kobalt with that 24v that thing will tear off your arm, their multi tools (such as the needlenose with built in strip gauge and the stupid fat grips on the end) are garbage. Their hole saws (i call em cup saws) are nice out of the box but dont last, super sharp though. I prefer diablos carbide tipped, great for plaster too

[@thisisntbec]

Hi Mate, currently applying for an electrical apprenticeship. very informative video, thanks!

[@oWhiteMonster]

I'm the apprentice that has tools that the foremen borrow, lol!!

[@djhutchins8873]

i feel that, i have a ferret, wire toner, skill saw, and sawsall that everybody is always grabbin

[@aboveyou686]

That makes you a good apprentice

[@eds6569]

If you're lucky like me you'll have a boss that doesn't keep track or take care of his own tools so he'll buy you new tools often because he knows he'll be borrowing 'em all the time and it's less for him to carry. Works out great for me since I love new tools and taking care of 'em plus I don't mind lugging the extra weight since it just helps me build muscle.

[@eddiew2325]

Ed S my foreman just takes my tools and forgets to give them back

[@eds6569]

@@eddiew2325 hahaha... That happens a lot too, I was afraid to ask for 'em back from him directly at first so I started asking "I can't find my *whatever* tool, has anyone seen it?" When others were around even though I knew he had it and get it back that way until I didn't care anymore and just asked him if he had my tool.

[@steveurbach3093]

I love my Klein threader #4 up for cleaning buggered box holes. Another Klein is their EMT tool. Reams and does lock screws. Another fan of real batteries. Dead, change them and you are back in business. Whereas you have to wait for a rechargeable.

[@sheldonfrey1]

Start using a 6" Channel Lock and you'll never take them out of your pouch.

[@TonberryShuffle]

Just to add to this, get yourself a good tool carrier. It may be a belt, a vest, a bag, roll, whatever works for your specific location and application but splurge on the good ones. Especially if it's a system you're going to be wearing and you really need to take comfort into consideration. Don't cheapen out on that. If you go the route of a multi-bit tweaker (precision screwdriver) avoid the Kleins. Their bits for the precision drivers, in my experience, are very poorly tempered. It's just better to have several dedicated tweakers instead unless you really need certain security bits from the multi-bit driver. The nebo lights are awesome. I lose them before I destroy them and the longest I had for one was nearly 10 years. The magnet on it had been cracked and was losing its oomph but the light just kept going and going.

[@walteralbayero3267]

What's up, when ru going to do another conduit video. I really enjoy ur sense of humor and I appreciate u taking the time making these videos.

[@ElectricianU]

Lot's of people have been asking this so I guess it's about time I get on it. Maybe in the next month or so, I've got some EMT stuff coming up

[@walteralbayero3267]

@@ElectricianU, thank you very much

[@C777-q3w]

I'm in love with this guys personality LOL had me cheesing all through the video...VERRYY informative video by the way, like SUPERB...I'm not even an apprentice yet, just took my aptitude test today, but I feel really good and inspired after I took the exam...I know not a single thing about the trade except for math lol so good looking out, this is just what I needed...subbed!

[@justintaylor4208]

He forgot to meant the hammer function of the linesman!

[@djhutchins8873]

nahh broskiedoodle, thats how you lock your pliers up since the best leverage to hit with is right on the bolt

[@shimes424]

*Every tool is a hammer* (except the battery end of a tool or my damn 3/4" bender! Still waitin for him to replace it...)

[@shimes424]

@@djhutchins8873 when closed, the lineman's pliers have a flat end that is perfect for thumb detecting. The same technique is used to slide the grips back into place 😉

[@eds6569]

I try not to use my linesman's for a hammer... But when I do I use the thick beginning part of the end right before the circle to avoid jacking 'em up which gives the best hammer action.

[@MwClipsandmoments]

DJ hutchins just don’t hit the Klein man on the head lol one side is fine to use as a hammer because the bolt is fixed and doesn’t move.

[@Fliegercantfly]

Never had an issue with nebo. Love there products.

[@samuelriveraserrano]

Can you please make a video explaining how to work safty at an environment where the electricity is on.

[@bradswensen117]

NFPA 70E. There should be a class near you somewhere. This is the recommended practices for hot work.

[@whitebeltlyfbjj3393]

I'm getting work experience as a electrician and bought tools based on the sparky I'm shadowing....they always getting borrowed by other tradesmen lol.... This guys knowledge is very extensive...bravo

[@timothykemp1772]

Well I know it is not a hand tool but I have seen boots that have a supposed electrically safe sole.So what is the down low on this type of foot ware?

[@atway70]

Only note - if you want to keep your tape as precise as possible, don't let it slap back. catch it with the brake at like 8ft and slowly let it in. The rivets smacking against the tape eventually elongate the holes, and start to fuck up your measurements.

[@papioscarw]

I went through about 100 replys and not once was a sturdy hacksaw mentioned. Also need allen wrench set for feeders in panels.

[@leosolis5846]

Why would you want a hacksaw when they make band saws and sawzalls

[@papioscarw]

@@leosolis5846 No power needed.

[@shawn576]

I think I had to cut strut twice with a hacksaw before I said "fuck this" and bought a recip saw. It was my first power tool in the trade.

[@DavidSmith-tz9bx]

Thread locker on the tape measure screw, this channel has helped me safely install motion lights, and dimmer switches.

[@matthewbattenfelder9]

Do yourself a favour and convert all two handled tools to Knipex, and I’ve used Klein for 15 years, not knocking Klein...but anyone that’s ever tried can’t go back.

[@Mjolnir_27]

All Pliers : Knipex All Screwdrivers: Klein Power tools: Milwaukee

[@Roosyer]

Mjölnir Svartalfheim Pliers: Knipex Screwdrivers: Wera Powertools: Makita That are def the best brands!

[@kenmen23]

Just passed my Aptitude Exam for the IBEW here in Utah, can’t wait to get started!

[@mamaswamma1234]

Dustin, do you have a blueprint reading video planned for future? If not that would be awesome! Love the vids

[@kevinsadowy5602]

My Klein's have a fishtape puller built in. So awesome.

[@ShoeFrags]

“Not in the tool world at least” lmao

[@mattb4885]

Great video! Fun fact, "channelocks" are a brand name from Meadville, PA (just aside my hometown) but 'adjustable' pliers are an essential tool!

[@darthcollosus]

I been in the trade a while and I could count on both hands how many times I've used needle nose pliers. But good video I think this could help some young guys. I don't think you should have to buy Roto splitters I never have. I just get a new pair from the employer every job they want me running mc.

[@veganlvl5202]

Rotosplits were invented by a plumber. Use mc pliers

[@spudatbattleaxe]

I use my needle nose daily, it’s interesting to see how we all do the same thing but different preferred methods

[@stunner55]

Knife comment resonates with me. My wife commented along the same lines that "women can and should have knives too"; so I bought here a little Victorinox knife. She said it was scary and refuses to keep it in her purse. 🙂 Great video as always.