EPOXY CABLE SPOOL TABLE (INCREDIBLE RESULT) [subtitles included]

WE CAN HELP WITH YOUR EPOXY PROJECTS 👉 stan.store/wee...
MORE INFO IN THE DESCRIPTION 👇
WE GET A LOT OF QUESTIONS ABOUT EXPOXY ON ALL OUR SOCIALS.
THERE WE OFFERED DIFFERENT SERVICES TO HELP YOU WITH YOUR PROJECTS.
CHECK OUR SITE FOR MORE INFO 👉 stan.store/wee...
WIJ GEBRUIKEN RESION EPOXY VAN POLYESTERSHOPPEN👇
🇳🇱 EPOXY VOOR NEDERLANDERS EN BELGEN geni.us/ASGQ1p
🇧🇪 EPOXY POUR LA BELGIQUE FRANCOPHONE geni.us/TQrB
🌍 EPOXY WORLDWIDE SHIPMENT geni.us/pcIx
IN THIS VIDEO WE MADE FROM AN REALLY OLD DUSTED CABLE SPOOL AN EPOXY TABLE. THIS WOOD HAS ALOT OF CRACKS AND HOLES, THIS MADE IT REALLY AUTHENTIC AND COOL LOOKING. IT WAS A LOT OF WORK BUT THE END RESULT IS AMAZING!!
FOLLOW WEEKEND BUILDERS AND STAY IN CONTACT!
👍 SUBSCRIBE HERE bit.ly/3stVhs6
📸 INSTAGRAM bit.ly/2NF53Jf
📸 FACEBOOK geni.us/V6kSi
🎥 TIKTOK bit.ly/3IYXDHR
🤝 CONTACT FOR COLLABORATIONS AND CAMPAIGNS
www.workwithwe...
#EPOXY #EPOXYTABLE #EPOXYRIVER
COFFEE TABLE | EPOXY TABLE

[@timadamsart]

GET OUR HELP WITH YOUR EPOXY PROJECT 👉 stan.store/weekendbuilders

[@broir8235]

Keren

[@MakeThings]

Looks fantastic guys! It has a rustic, new age kind of charm! Beautiful!

[@timadamsart]

We are very happy with the end result😁

[@reeltablesoflasvegas9549]

What is the product you inserted into the gaps before the epoxy was poured into them? Looks like DAP or liquid nails or? The clear glue looking product? Thanks

[@Zedster88]

The sanding from 4:06 to 4:49 must have taken quite some time. I would really like to know how long. 🤪

[@BasedLyfe21]

What are y’all silling the cracks on the top of the cable spool in the beginning with ?

[@timadamsart]

This is silicone caulk.

[@Cletus.223]

Absolutely love the end result however I think I would have left the metal ring around the outer perimeter it would have looked nicely rustic

[@timadamsart]

Hi Bryan, thanks!! We really liked this one too. To do with the metal would be really difficult in combination with Epoxy.

[@genevabecker8441]

Beautiful results. I have a spool table as well, but I was wondering do you use Mrs. Boat Epoxy only?

[@timadamsart]

Now I use different Epoxy. Check the link in my bio.

[@jerryonion]

I made similiar job putting 3-4 layers of the epoxy resin, but the surface is not smooth enough - few small holes in the surface made small craters. Can you advice what is better; just polishing all the surface with polishing paste or grinding it with over 320 sandpaper and cover with oil/wax or clear varnish?

[@timadamsart]

I would put silicone caulk in a circle around the craters and then put epoxy in there let it cure, sanding and then polish everything or an Epoxy top coat. I hope I have helped you with this. We can always help you more with your projects, just check out our website: stan.store/weekendbuilders

[@chrisrodriguez3575]

Beautiful craftmanship, I personally would kept the steel ring around the edge as an accent. But I'm not the one with the channel lol. I liked the outcome, keep them coming.

[@timadamsart]

Hi Chris, thanks. The ring was really old and we didn't like it. We probably going to use it in a other video!!

[@Cletus.223]

Totally agree

[@phunkissartisticcreations2316]

This was a fantastic upcycle and a great looking table! We especially like the darker areas for contrast, nice job!👍👍

[@timadamsart]

Thanks, yeah the black looks really cool😁

[@escoukraine8384]

Heel mooi maar waar heb je het product vandaan

[@timadamsart]

Dat is Epoxy, zie de URL links in de beschrijving van de video👍

[@ZacJones]

Great video guys! The table turned out great, I like yalls style!

[@timadamsart]

Thank you 🙏 We really like how it turned out too 🤩

[@dlinto69]

How did you fill/seal the holes in the middle of reel Before filling with epoxy ?

[@timadamsart]

We filled as many holes as possible with silicone caulk.

[@TheHayes32]

Looks great. Came out wonderfully. Maybe consider putting the metal collar back on the table after for the next one?

[@timadamsart]

We still don't know what to do with the other disc. But who knows, maybe we make something and leave the metal collar in place😉

[@mischievousmuffin5568]

I have a spool im working on aswell. Id love to find the blueprint for the legs you used. Trying to figure out how to do them like yours. This is my first wood working project and i have like 7 spools. Gonna try to epoxy my next one if i can make some money off my first project. Nice video and thx for sharing!

[@timadamsart]

Thanks!! I don’t know where you can buy these in your place. Suc6 with your projects.

[@francisvieou3913]

That table came out really nice. We have two tops at the chapel, but no one wants them. If I could make the table you did I would sell them and give the money to the Church. Thanks for the video.

[@timadamsart]

This is a very sweet gesture, success!

[@hendriekeschoot5474]

ik zag dat de rand zwart is , is dat ook van epoxy? en nadat je zwarte epoxy heb gebruikt en geschuurd wat voor laagje heb je erop gesmeerd? (4:58)

[@timadamsart]

Omdat we de rand niet helemaal goed zwart kregen met Epoxy hebben we een beetje zwarte spuitverf gebruikt. De laatste lagen zijn gewoon dezelfde Epoxy maar dan zonder pigment.

[@benjaminharrison3079]

Where did you get the legs?

[@timadamsart]

Apollo Loca here in the Netherlands

[@bthosath]

Nice! So the first detail layer of epoxy has coloring added and top coat is clear, correct?

[@timadamsart]

Yeah, that's exactly right👍

[@TandemRotor46]

This looks great. Would’ve been helpful to have some actual instruction throughout the video instead of the music.

[@andyfeyen8704]

Wat doen jullie erop met de verfrol? Is dat vernis? En daarna nog eens gewone epoxy over heel de tafel?

[@timadamsart]

Het is beide Epoxy, zie de links van de producten in de beschrijving.

[@Barthali]

Hallo Weekend Builders, hoeveel kg epoxy hebben jullie voor deze tafel gebruikt?

[@timadamsart]

We zouden het niet meer precies weten maar we denken tussen de 10/15kg

[@Imawesomebach]

Looks great

[@WesD85]

Great finish. I'm looking to do my first epoxy project with a cable drum I got from work. Would you recommend anything else other than cardbord to go round the edges? It looked like it was quite difficult to remove?

[@timadamsart]

Our advice would be to tape the cardboard mold well with packing tape so you can get it loose from the cured Epoxy. We forgot to pack the whole mould with tape. You can see at 04:00 that there is a line in the middle, that's where the packaging tape was, so you have to wrap the whole mould with tape.

[@xxrumlexx]

Doing something similar with stabilizing wooden drums doing a cobber powder mixed epoxy in the holes then ill grind it down and give it a light top coat finish. The card board thing you did. Is something ill copy much better idea than what i was doing.

[@timadamsart]

Great project you are going to make. Don't forget to tape all of the cardboard with packing tape, that way you can easily get the Epoxy off of the cardboard!

[@xxrumlexx]

Absolutely:D

[@thomasroschmann1135]

hoeveel epoxy hebben jullie hiervoor gebruikt en welk schuurpapier ?????

[@timadamsart]

Hier is wel wat Epoxy gebruikt! Helaas weten we niet meer hoeveel. We gebruiken altijd schuurpapier 120/240/400/800/1000/2000👍

[@lisafisher7132]

What did you finish the outer edges with?

[@timadamsart]

it's all Epoxy, we have links in the description.

[@brianlister6036]

where did you get the legs ? I have a 48" spool top that I am looking to do something very similar just can't find legs suitable

[@timadamsart]

These table legs came from Apollo Loca Amsterdam. There are several companies online that deliver these legs.

[@marcvanberkel8512]

Nice work on that old spool, looks good with the sanding.

[@timadamsart]

Cool, thanks Marc!!!

[@yepperization]

Do you have any instructions on this or a step by step. It looks beautiful

[@timadamsart]

Hi, we have no instructions from it. We made it just like the video you see. We always make projects and try to capture it as good as possible for the video. If you have any question please send me a DM on Instagram.

[@subatomic3600]

It was fantastic! Why did you use the underneath of the top? Each to their own but damn, cool mate z

[@timadamsart]

Thank you! We actually found this side much prettier😉

[@hildamoore100]

Weekend Builders!! that table is breathtaking it looks like glass that top is so smooth but what would happen if a hot pot or pan is laying on it would the finish be compromised

[@timadamsart]

Hi Hilda, Thanks, we really love this table too😉I have no experience with putting hot pots or pans on a table. We always use a coaster under it, that's what we do with a wooden table too.

[@SAUdustBuilds]

Looks great. I have to say, I’ve never seen anyone use cardboard before as a mold. If you want to save time and have something you can reuse then try landscape edging. I use it for circle moldings and it works great.

[@timadamsart]

Thanks for tip👍 I used it once for a project, but that was the wrong one!

[@ElexisEvelyn]

Where are the legs from?

[@timadamsart]

www.apolloloca.nl

[@MarcelVanNieuwenburg]

Fantastic! Since I found out what a beautiful things you can make by using epoxy, I'm really exited. Love your work and inspiration!

[@timadamsart]

Wow thanks for these kind words, keep us following because more cool Epoxy projects are coming😁

[@giovannirodriguez5975]

Looks amazing !! What were you applying with the epoxy gun??

[@timadamsart]

I don't know exactly what you mean but we have filled the holes and cracks with silicone caulk, so we need less epoxy. Check this Amzon link amzn.to/337PCvU

[@brothatothanight1379]

I really wanna do this and I have the tables to do it, so If you don't mind me asking, what it all the liquids you mixed together and poured on top of the table so I can buy it off the website? Thanks alot, I'm ready to get started

[@timadamsart]

For the whole table we used Epoxy with black pigment. For the top layer we used the same Epoxy and then without pigment of course. We used this Epoxy www.mrboat.nl/mrboat-epoxy/. If you want to order from Amazon: ➤ Epoxy Resin amzn.to/2v3OFEU ➤ Epoxy Color Pigment amzn.to/2PnJhbI

[@fernandoevangelistagoulart2481]

Great work 👍🏽

[@timadamsart]

Thanks Fernando👍

[@harveyhess9452]

How much epoxy did it take to do the whole project?

[@timadamsart]

Unfortunately, I didn't keep up with it, but this project involved a lot of Epoxy.

[@andymanchon8157]

This project uses about 2.25 - 2.5 gallons of epoxy. He knows how much he used. He just didn't want to tell you.

[@stefanpeek148]

Sauber Junge !!! 😎👍

[@harrytraction1380]

You don’t explain any of the process.. great results but, the process?

[@timadamsart]

That's what the whole video is for😉

[@mennolabeee]

Heel nice geworden! mooi idee ook

[@timadamsart]

Hey Menno, Thanks!!!!

[@sue3424]

why throw away the round metal piece?

[@timadamsart]

We liked him better without😁

[@MaciejDanielTomczuk]

Dobra robota👍😍

[@timadamsart]

Thanks!!!

[@BioGloo]

Do you have an email where I can ask questions about this video?

[@timadamsart]

Always by sending us a DM on instagram @weekendbuilders

[@BioGloo]

And for losers like myself who don't have Instagram? 😂

[@timadamsart]

@@BioGloo Check our about page for our e-mail😉

[@TheGrantAlexander]

Very nice, I have always wanted to use a giant spool for something! 😎

[@timadamsart]

Thanks! Just do it 😁

[@chocluva2678]

BEAUTIFUL!

[@timadamsart]

Thank you!!😁

[@carlosalvim7899]

Parabéns, lindo trabalho 👍👍👍👏👏👏👏

[@timadamsart]

Obrigado 🙏

[@killerfromafrica]

Amazing 🤩

[@timadamsart]

Thanks 🤗

[@moop182]

THAT is an amazing job ! Thanks for that, best one on KZbin ;)

[@timadamsart]

Thanks Maxime 😁 We also really love the outcome of this project!!

[@N3de3rland1]

Super vet! Zou graag zelf ook eens zoiets maken

[@timadamsart]

Gewoon aan beginnen dan😉. Het is niet goedkoop om deze tafel te maken, er ging echt veel Epoxy in. Of je kunt hem gewoon voor een mooi prijsje overnemen van mij, hij staat hier nog in de schuur te wachten op een koper😁. Als je interesse hebt, stuur me een DM op Instagram/Facebook.

[@LonghornWorkshop]

Good job, should have reused the metal ring.

[@timadamsart]

That one we will use some day with a other project I guess!!!

[@elizito]

Muito top. Manda para Brasil. Abraço Maurício

[@timadamsart]

Muito caro !! Haha obrigadao !!!

[@gab_m_mad]

Awesome! Wow

[@timadamsart]

Thanks😁

[@vladisartdesign7080]

It's fantastic 👏

[@timadamsart]

Thanks guys!!!😁

[@tomwesselius2179]

Ziet er heel vet uit!

[@timadamsart]

Cool, thanks😁

[@nuttheenatheeakkarapat2017]

Goodjob

[@josibear9389]

Beautifull

[@timadamsart]

Thanks!!

[@eds99319]

Sensacional, video bem elaborado!!

[@timadamsart]

Muito obrigado 😁

[@johncoonradtjr.5141]

The top was great.

[@timadamsart]

Thanks John!!

[@asilayahya9702]

برافو عليك وتحياتي

[@timadamsart]

Thanks!!!👍

[@johncoonradtjr.5141]

Good job

[@timadamsart]

Thanks

[@johncoonradtjr.5141]

You didn’t show anything about making the legs.

[@timadamsart]

This video was only meant for to be the Epoxy tabletop. We had borrowed the table leg😂

[@maggyjesusnata]

Fantastico....

[@timadamsart]

Thanks Maria😁

[@pp_carp]

Pekné.

[@timadamsart]

Thanks Peter👍

[@thebeast2746]

Subtitles would help 🙄

[@timadamsart]

We have English, Portugese and Spanish subtitles😉. You can find them in the options of all our video's.

[@Onelastbreath1976]

Cant understand a word... 😂

[@timadamsart]

I hope you used the subtitles😉

[@Onelastbreath1976]

@@timadamsart haha. I didn't! I didn't see them at all? I guess they were cut off on my phone.