Epoxy Concrete Anchors vs. Mechanical Anchoring Bolts

There are many reasons why chemical anchoring is better than mechanical anchoring in terms of cost, labor, time, and performance.
Topics Covered:
0:23 - What is an Anchoring System?
1:30 - Two Types of Anchoring System
1:43 - Types of Mechanical Anchors and Disadvantages
3:53 - Chemical Anchoring System for Concrete
5:52 - Tensile Strength of Epoxy Anchor
6:17 - Using Buildrite Confix Anchor
7:37 - Reminders when using Confix Anchor
9:44 - How to Install Anchors on CHB
12:25 - Using a Chemical Anchoring System
16:15 - Pull-out Strength Test: Chemical vs. Mechanical Anchoring
Installing anchor bolts in concrete is unique compared to other fastening applications such as fastening two pieces of metal together by using a screw or a bolt and nut. Concrete anchors are much more difficult to install and use. The concept of fastening something to a solid base material is completely different than for almost any other type of fastening application.
Anchor bolt installation for concrete require friction for bonding and enough support for load transfer. A mechanical concrete bolt anchor is installed against the sides of the hole, inducing compression stresses to the base material. This requires enough base material strength around the concrete anchor bolt to withstand the stresses. Without a strong base material, the concrete anchor fastener will not have enough grip as it creates small voids on its sides. Mechanical anchoring is unsuitable for weaker base materials, such as brickwork, stonework and especially, blockwork where they would simply crack or crush.
Because of these weak points, we recommend chemical anchoring, a technique in fastening bolts or rebars to concrete and similar substrates using a special epoxy, which provides more flexibility and strength than mechanical anchoring.
With chemical anchoring, a resin is injected into the hole prior to insertion of the bolts or rebars. The epoxy completely fills the hole, making it airtight with 100% adhesion. Chemical anchors have virtually unlimited embedment depth, so you can embed any length of rod into the hole to increase its load capacity.
Confix Anchor is a high-strength, non-shrink anchor grouting material. It is an anchoring adhesive that has strong bonding strength and good thixotropic property. It is applicable on vertical and overhead surface anchoring.
🛒 Shop Online:
Confix Anchor - bit.ly/3GjE0cD | bit.ly/3xcuhzN
Blow Pump - bit.ly/3cPqqn2
Nylon Sleeve - bit.ly/3Q2HrZg
🔨 Depots: bit.ly/3wgvEhD
☎️ Call Us: 0905 479 3992 | 09054793991 | 09054794008
📧 Email Us: [e-mail]
🎞 KZbin Channel: • Choosing the Right Fir...
🌐 Visit Our Website: www.magnaprime.com.ph/
📱 Join Our Viber: bit.ly/3gZGjXN
#Concrete #Concretedamage #Concreterepair #epoxyinjection #epoxy #anchorbolts #rebaranchoring #baseplates #Chemicalanchor #Rebars #Concreteanchor #Epoxyanchor #Anchorblock

[@romeoreyesjr.3625]

Another great product from Buildrite, thanks for sharing.

[@BUILDRITECONSTRUCTIONCHEMICALS]

We appreciate your comment,.Thank you for supporting Buildrite!

[@jhunebarttv9145]

salamat sir sa Dagdag kaalaalam laking bagay ito ito👌

[@BUILDRITECONSTRUCTIONCHEMICALS]

You're welcome, sir. God bless the family.

[@ajli4802]

thx for sharing !

[@BUILDRITECONSTRUCTIONCHEMICALS]

You're welcome!

[@JUDITH22singlecntntd]

pwede gamitin for expansion bolt used for an angle bar pang secure ng tubular as floor joint at pang paa ng stairs?

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi, thank you for your inquiry. In order to fully answer your concern, we would like to request some further details from you. Please send us a message on our official Facebook page: facebook.com/BuildritePhils

[@wilangeles3735]

Sir pede po ba yan sa machine mount. Like extractors ng industrial laundry equipments.

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi.Thank you for your inquiry.Yes po sir pwede po basta anchoring.

[@Jed-mt1px]

sir pano po pag may existing base plate po pano po lagyan ng chembolt

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi sir thank you for your inquiry. For existing base plate you need to drill a hole to apply your chemical anchoring adhesive before applying anchor bolts. For assistance in preparations and applications and to know more about your concerns pls message us at facebook.com/BuildritePhils/

[@pong3753]

Yung product nyo po ba available sa laha hardwares gaya sa province?

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi, Thank you for your inquiry. Here is the list of partner depots and hardwares where selected products of BUILDRITE are available , please see this post for your reference : facebook.com/256507011151769/posts/2287299198072530/ For further assitance, you can send to us your contact details here : web.facebook.com/BuildritePhils , so we can talk about your product needs.

[@josephcalinawan4964]

saan po pwede makabili ng solidcure grout.. nagtanong napo kami sa lahat ng wilcon depot, wala din po.. frm. batangas city.. salamat po sa pagtugon nyo.

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi. Thank you for your inquiry. You may contact our Sales Leader assigned in your are, Ms. Jeanette Manalo at 09266348425.

[@moloculemedia4966]

Hello po!! San po kaya na kakabili ng nylon sleeve?

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi! you can order online via our Magna Prime Shop (bit.ly/3D8vqLx) , official Lazada and Shopee shop (shp.ee/4qyr3gy) (s.lazada.com.ph/s.fFwNe) or you may send to us your exact address thru our official facebook page: facebook.com/BuildritePhils and we will be more than glad to help you find the nearest store or hardware where you can buy our products

[@libangannijuan3570]

Pwede ba yan gmitin sa abang ng Horizontal bar sa column sir.?

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi, thank you for your inquiry. Yes, you can use Confix Anchor as an achoring adhesive for the extension of rebars.

[@r.m.tugbobulders6535]

San pwed magpurchase chemical anchor and other tools

[@adecastro8623]

Sir hindi npo expansiom volt? Screw nlng gagamitin,m

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi, thank you for your inquiry. When using Confix Anchor, there is no need to use an expansion bolt. You can use threaded rod.

[@adecastro8623]

Pede po gumamit ng deform bar hindi po siya mabubunot sir?

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi, thank you for your inquiry. Yes, you can use Buildrite's Confix Anchor for rebars.

[@krameymartin5042]

@@BUILDRITECONSTRUCTIONCHEMICALS sir magkano po

[@joelungco8212]

meron niyan nasa glass diba ano ang pag kakaiba nun chemset ?

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi.Thank you for your inquiry.To know more about our products, message us on our official Facebook page: facebook.com/BuildritePhils

[@lixtervalenzuela6858]

Ilang oras o minutes po ang curing time sir?

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi, thank you for your inquiry. The curing time of Confix anchor depends on the temperature. For ≥30°C, operation time will takes 20 minutes and harden time will takes 6 hours.

[@netsektor]

Hello Buildrite, audio is not good.

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi, Thanks for sharing your feedback. Please feel free to reach out to us with any further comments, concerns, or suggestions you wish to share. We would love to make things right for you.

[@JUDITH22singlecntntd]

sample ng bolt na pwede d'yan? may ganoon kayong product? mahal ang threaded rod compared to dyna bolt.. tek screw, lag screw, wedge bolt, pwede d'yan? sana may product kayo lahat n'yang pinagsasabi niyo like nylon sleeve....

[@BUILDRITECONSTRUCTIONCHEMICALS]

Hi.Thank you for your inquiry.Para lang po sa rebar planting at threaded rod sir.

[@JUDITH22singlecntntd]

@@BUILDRITECONSTRUCTIONCHEMICALS fast forward to 4:40, it says ability to use in variety of metals.. hence, can you itemized those metals? ang wedge bolt kase for example, threaded parin for the most part.

[@BUILDRITECONSTRUCTIONCHEMICALS]

In order to fully answer your concern, we would like to request some further details from you. Please send us a message on our official Facebook page: facebook.com/BuildritePhils