Epoxy Countertops over Plywood, Huge cost savings | Stone Coat Epoxy

  Рет қаралды 2,374,555

Stone Coat Countertops

Stone Coat Countertops

Күн бұрын

Пікірлер: 1 400
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
🟢 We just dropped THREE Masterclasses for you. Which did you learn from the most? This kitchen video, the LED Island video, or the Foam Shower walls video? 🟢
@booiiiiibsyoutube
@booiiiiibsyoutube 3 жыл бұрын
I Love The OCEAN SCENE WITH HOLLY & Her HUBBY ON THE YATCH THANK YOU ALL Namaste Shukrya! Danki
@kellywilliams5112
@kellywilliams5112 3 жыл бұрын
You should show us how you do a farmhouse sink install with the epoxy.
@diannegray828
@diannegray828 3 жыл бұрын
Liked em all. Really love the pro tips-small gutters, molds of the backsplash and shower insert, mix of different colorant s to get different effects, and damn your house is beautiful. Tell your boys safety first with the chipper😂
@guaranteedwinnersclub
@guaranteedwinnersclub 3 жыл бұрын
Give me a call Quist.
@kacykimball6169
@kacykimball6169 3 жыл бұрын
I loved everything about the kitchen you guys did! 😍
@tealkerberus748
@tealkerberus748 2 жыл бұрын
I was taught when installing benchtops to only ever screw them down from underneath. That way, when you decide to change them, you can unscrew them and lift them out easily. If you screw down from on top and then put your finish coat on top of your screwheads, you're kind of screwed later.
@barbatloosenutproductions2027
@barbatloosenutproductions2027 2 жыл бұрын
Yup. You got a point there. I wouldn't be too happy, if I found out that I have to do extra demolition just to remove a countertop!😖
@billycheefmusic
@billycheefmusic 2 жыл бұрын
Seriously though is that all you can find to moan about 😂👍 If so that's good.
@trevorashton4598
@trevorashton4598 2 жыл бұрын
@@billycheefmusic 🤣🤣😜
@211212112
@211212112 2 жыл бұрын
Good tip.
@MrsSoapAndClay
@MrsSoapAndClay 2 жыл бұрын
I mean, you can cut through a screw to remove the top regardless of how it was installed in about 5 seconds.
@kimwentz442
@kimwentz442 Жыл бұрын
I can't imagine the sense of satisfaction, and the joy of being part of a close knit team ,& your brother along . The joy is palpable. I enjoy watching you guys every time. Lol I get inspired each time because of the possibilities. So good. Thanks again.
@FXPips11
@FXPips11 3 жыл бұрын
This video is gold! Starting my own business with StoneCoat, literally with less then $200 and building from there. Might start by making backsplashs first, custom color by customer to start and build my business.
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thats amazing! We would love to see how your projects turn out on our Facebook Page Stone Coat Countertops insiders.
@4claudiasmith
@4claudiasmith 3 жыл бұрын
Good luck 👍🏼
@krisbuildit5149
@krisbuildit5149 3 жыл бұрын
Get er done! ANYTHING is possible with a little honesty and managing expectations with your customers. It will drive word of mouth referrals and make you life long return families of customers. GOOD LUCK AND DON'T STOP!
@FXPips11
@FXPips11 3 жыл бұрын
@@StoneCoatCountertops THANKS! I will for sure, Im going to start by making desks. I already have my Stone Coat Epoxy i ordered 6 months ago LOL, and got the MDF and ordered the legs. Going with the stone edge look, Black, metallic purple, and hint of metallic Blue, 8 yr old daughters favorite colors!! Will definitely post Pics!! Thanks You for your Enthusiasm and Guidance in the ART of EPOXY!!
@FXPips11
@FXPips11 3 жыл бұрын
@@4claudiasmith THANK YOU!
@QueenofArgyle2525
@QueenofArgyle2525 2 жыл бұрын
THIS is what should be taught in schools starting in jr high! The trades are ALWAYS needed!
@duanewolgast4165
@duanewolgast4165 2 жыл бұрын
I love doing this kind of stuff!!! I wish I was 15 years younger to start a business doing this. It's great all the creative things around the house you can do with epoxy!!! I love it!
@KaiserArmaggedDon
@KaiserArmaggedDon 2 жыл бұрын
Guys I am an DIY -holic and I've gotta admit your video belongs to the top five outta all flix I watched in a year or so. Love from Germany
@e.t.preppin7084
@e.t.preppin7084 2 жыл бұрын
Really loved the idea to make a mold to create your own tile for the backsplash considering the supply chain issues these days. The company I work for is doing a lot of the same kind of things. Basically manufacturing things we are having trouble getting but are necessary in construction to keep projects moving forward.
@jasoncampbell5847
@jasoncampbell5847 3 жыл бұрын
I completely remodelled our last home of 13 years due to a major water leak. Went through 3 sub par (to say it nice) sub contractors and fired the contractor too. Ended up doing the rest myself and sold the house. Went from a completely remodelled beauty to a very well built home straight out of 1995. My son is paralyzed and I need 2 roll in showers and am also completely remodelling my kitchen. I plan to use your system for all of it. Looks amazing and love your videos. Very educational. Wish I had saw them before spending $8000 on granite. Keep up the long talks, we get a lot of pro tips that way.
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Welcome Jason, wow that is incredible. You Got This! if you have any questions please let us know. We can not wait to see your work.💪
@Zenkai76
@Zenkai76 3 жыл бұрын
1 MILLION! CONGRATS GUYS! Your hard work is paying off! God bless!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you so much for your support! Have you done any projects with StoneCoat epoxy? Remember You Got This!
@Zenkai76
@Zenkai76 3 жыл бұрын
@@StoneCoatCountertops Yes! a 55sqft desk, a bathroom floor, soon my basement countertops then my kitchen counter tops!
@drjcwardjr
@drjcwardjr 3 жыл бұрын
True craftsman with the eye of an artist, the brain of a scientist and a passion for perfection!
@tc96z1
@tc96z1 3 жыл бұрын
Just recently started watching your channel. Closed my Countertop shop owner after 911. Doing a raised 42” pass through and excited to do one of these instead of hiring a fabricator for granite. I have one suggestion watching this video but sure not criticizing, ✅. When you layup the full sheets scribe the back wall (if needed) and make your cut BEFORE you trace the front of the cabinet to get your overhang. Perfect fit front and back every time.
@martinm3474
@martinm3474 3 жыл бұрын
Retrofit, marking back edge is a "need to" and is smart even with new construction.
@libertarianman69
@libertarianman69 3 жыл бұрын
I like how you speak to your employees. You don't get disrespectful and raise your voice. That's one thing I hate about a lot of contractors is they forget that they had to learn at one time and they get really disrespectful to their employees. I have my own business and I never get disrespectful or yell at any of them. I may get aggravated but I don't let that out. Especially in front of a customer like some people I know.
@elyseruben4143
@elyseruben4143 3 жыл бұрын
Great video...only one thing I have to comment on. The electric outlet covers should have been removed before measuring for cut outs. They needed to be extended to the outside of the backsplash. By code they cannot be recessed into the backsplash the way you did it. Hope you see this...FYI
@jencampbell8414
@jencampbell8414 2 жыл бұрын
I came here to say same thing!
@raymyhill2
@raymyhill2 2 жыл бұрын
@@jencampbell8414 Me Three
@polygamous1
@polygamous1 2 жыл бұрын
Agreed but easily rectified guys with deep skeleton extension boxes of different depth n overall the job was Great
@Gary-Seven-and-Isis-in-1968
@Gary-Seven-and-Isis-in-1968 2 жыл бұрын
Good point and well made.👍 Somehow it just didn't look right.
@kensebastian9372
@kensebastian9372 2 жыл бұрын
@@raymyhill2 Me four!
@michelenix1562
@michelenix1562 2 жыл бұрын
I love this channel! I really love that your brother, calmly, walks in and just starts helping. God bless you all.
@ericscustomtile
@ericscustomtile 3 жыл бұрын
As a tile installation professional, I can find only one critique and that is that there should have been box extensions and covers over the stone backsplash for a cleaner look. The rough texture could be overcome or router the plates into the surface. It would allow a smaller opening to be cut and more material so breaking the pieces when cutting is not as likely. It also would allow for easier access to the plates in the future.
@khurammushtaqch
@khurammushtaqch 3 жыл бұрын
Thinking same as u
@charliehorse5581
@charliehorse5581 2 жыл бұрын
agreed, the sunken outlets are bush league
@conga205
@conga205 2 жыл бұрын
I don't even OWN a home, and you (and crew) do such amazing work that I got no choice but to watch you do your magic.....This is what they mean by "Craftsmanship", Professionalism, Ingenuity, and above all...Artistry at its best. Kudos...
@MrKen59
@MrKen59 3 жыл бұрын
This past few months I’ve set aside fear and begun to do my own dyi remodel. This class has inspired me for my kitchen upgrade. Thanks.
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
You Got This Ken! Let us know if you have any questions, we can not wait to see your work!
@starbattles1
@starbattles1 2 жыл бұрын
I love when home owners do this with my work. I get that call to come fix it for them lol.
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello how are you doing dear
@trulybear2212
@trulybear2212 3 жыл бұрын
I’ve watched your videos for a couple years now. But just recently I realized I’ve been driving by your place after getting tacos or going for pizza & ice cream. Pretty cool knowing that a local is a national success. Great work!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you for your support! Have you thought about giving StoneCoat epoxy a try? Maybe next time stop on in! Remember You Got This!
@trulybear2212
@trulybear2212 3 жыл бұрын
@@StoneCoatCountertops if I ever get my trailer conversion started, i know for sure I’ll be supplying from you for the shower.
@elizabethava4829
@elizabethava4829 3 жыл бұрын
Successful people don't become victorious overnight. What most people see as a glance wealth, a great career purpose is the results of hard work and hustle over time. I pray that anyone reading this will be successful in life.
@lynsiemae9587
@lynsiemae9587 3 жыл бұрын
@Michael Aiden NEVER LOSS?... I sincerely doubt when I see such things like 100% WIN strategy, Crypto trading is very technical, involves carefulness and great IQ... I wonder doing that with no losses or I will say only a professional trader/broker can do that.
@deborahhilgert4563
@deborahhilgert4563 3 жыл бұрын
Nowadays, there are lots of brokers and to find one, it most be online, retail, trusted and reliable. So please how can I find a professional broker to trade with?
@johnkaren7286
@johnkaren7286 3 жыл бұрын
@@deborahhilgert4563 Yes you're right. There's a professional which I have been investing with his names are Chris Sain. We've been working together for months now and he's been awesome.
@jennylingard5989
@jennylingard5989 3 жыл бұрын
I do all my investments with Chris Sain trading service, his services are top grade.
@leachjulie4975
@leachjulie4975 3 жыл бұрын
I thought of investing in bitcoin and forex sometimes ago but I was discouraged by my friends. Please who is this Chris Sain?
@coradixon525
@coradixon525 11 ай бұрын
I am loving how you did your molds for the backsplash. So glad you show all your tips of the trade. I made a countertop a year ago in my house that I sold and it was such an awesome focal point in my kitchen. Love you all
@GreggCollum
@GreggCollum 3 жыл бұрын
This kitchen video is what I needed. I'm going to use the 3/4 inch plywood and 3/4 inch mdf for my new countertop vs using the old particle board laminate ctop! Thanks Mike and the team at Stone Coat Countertops! You're producing the vids almost as I need them! Your Texas customer!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Gregg Thank you for all the support! Hope you have as much fun with your project as we did with ours! Remember You Got This!😃🙂
@MostlySoberAdam
@MostlySoberAdam 2 жыл бұрын
I’ve been watching you all day man I love the Contant thanks for not being a gatekeeper and trying to keep your pro tips to yourself!! Going to give it a try!
@seriouscat5242
@seriouscat5242 2 жыл бұрын
I obviously love your work and all the detail you go into explaining the reasons for every step. Also, Great video footage! I could watch you guys all day.. Thank you for schooling us all!
@t.m2933
@t.m2933 3 жыл бұрын
You are a true Craftsman who builds with pride. That kitchen came out beautiful..
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you so much for your kind words! Have you tried StoneCoat epoxy? Remember You Got This!😃
@Skoben2000
@Skoben2000 3 жыл бұрын
WOW! Love the gutter idea. That's what I really like about you guys. You're always thinking, always innovating and always inspiring.
@jewcyk8268
@jewcyk8268 3 жыл бұрын
I'm diggin the thumnail, and wish I had endless amounts of these colors and epoxy to mess around with to find out what scheme I like most!
@liquidlight3200
@liquidlight3200 5 ай бұрын
I am using the old cupboard doors from the kitchen I tore out to practice different color schemes/applications. I ordered lots of different colors to have a good supply to choose from
@troy5163
@troy5163 3 жыл бұрын
The little yellow miter box works great with a Japanese pull saw. It is quick, clean and gives a longer stroke length. I told myself I would never use one either, but sometimes for a few quick cuts - beats pulling out the power tools. Pro-Tip! Love the videos, y’all are amazing!!
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello Troy how are you doing
@melissawilcox5285
@melissawilcox5285 3 жыл бұрын
Sitting here watching this on a cold rainy Sunday afternoon, and was so happy you put the super hero looking locust back splash right side up! Great job all around!
@marcuszettergren8885
@marcuszettergren8885 3 жыл бұрын
Amazing work! As a tiler though, i'd definitely try to find a way to flush mount those wall sockets. I'm pretty sure you can lift them out and use a black bracket around them plus a bit of dark grey silicone and they would be totally flush and natural.
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
That's a great idea Marcus! Have you used StoneCoat epoxy with any of your projects before? Remember You Got This!
@bonelesswhiskey2865
@bonelesswhiskey2865 3 жыл бұрын
Another option; Make custom outlet covers with matching screws
@ben_wyatt
@ben_wyatt 2 жыл бұрын
@@StoneCoatCountertops how much overhang did these counters have? About to do the same to my countertops and want to emulate this
@daveyelmer3222
@daveyelmer3222 3 жыл бұрын
The MDF over plywood for counter foundations design is golden
@DerekWoolverton
@DerekWoolverton 2 жыл бұрын
The last induction cooktop I put in from Bosch was so low profile that instead of trimming out with two fake half panels, I was able to put an actual drawer on the right after trimming 3/4" off the sides. Great for holding utensils.
@america1403
@america1403 2 жыл бұрын
Good Lord! Your Talent, Attention to detail, and Perfectionism is absolutely AHHHMAZZING!!!!!
@andreagreff2316
@andreagreff2316 3 жыл бұрын
WOW! You do amazing and detailed work! I cannot believe that fabricating the counter tops out of plywood and all would cost less than just fabricating quartz and installing them.
@incasejstn
@incasejstn Жыл бұрын
I can't believe what y'all did with that kitchen! The making of the molds for the backsplash BLEW my mind almost as much as how similar Mitch and mike sound! I have a twin and even we don't sound that similar! The repurposing of the cut out for the cooktop for the backsplash was true Masterclass! Y'all are just out of this world when it comes to how much creativity, ingenuity, professionalism and DOWNRIGHT ARTISTRY you all possess! I would be remiss if I didn't just say THANK YOU for sharing all of your inventions and creations and secrets with the world! Watching your videos is tantamount to the morning sun beating down on the VERY tiny little seedling of creativity within me! I get so many ideas on various projects that I could do but more often then not they remain as just ideas because of lack of tools, experience/artistic ability, money and unfortunately prior failures. Nevertheless, I'm certain that SCC will continue to resonate with myself and many others for many years to come!
@jelliottnesss
@jelliottnesss Жыл бұрын
If I had my way, this would be the only company in the world doing this type of work that could legally exist. No one is better than these guys. Their work is absolutely amazing. I’m surprised they don’t have 100 million subscribers.
@TFABMN
@TFABMN 2 жыл бұрын
I lost you great guys for a while... now I found you and are even more amazed!
@kevinharrisonadt8839
@kevinharrisonadt8839 3 жыл бұрын
Great team effort , clear instructions . Way to go Mike !!! SUPER
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you for all the support! Have you done any projects with StoneCoat epoxy? We would love to see pictures if you have!
@chrisarndt6550
@chrisarndt6550 3 жыл бұрын
What did I learn? So much! I want to build a counter in a little mother in law house and this gave me all the tools I need!
@realhumbleopinions
@realhumbleopinions 2 жыл бұрын
Fantastic work on making those concrete slabs for the backsplash! One thing I would do differently is to add thinset to the mix. It makes the material a lot more rigid and dense. That picture frame looking piece looks perfect! Good job overall
@bobm2331
@bobm2331 2 жыл бұрын
So why no sealant on the horizontal flange of the sink? I got the edge sealant but seems like it would be one more barrier to water seepage. Nice counters, again. 👍
@andromedanh
@andromedanh 2 жыл бұрын
I agree. There has to be coat of sealant or Liquid nails to glue to counter top. Thats a must. Wood blocks and thin coat on joint is not enough to hold sink over many years.
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello Bob how are you doing
@nickbrumley911
@nickbrumley911 3 жыл бұрын
WOW!! You guys did an awesome job. Your instructions are great as usual and easy to understand. Ive learned a ton of things watching probably all your videos over the last few years. It's amazing having seen your first videos in your house and original shop to where you are now. God has truly blessed your efforts and talent. Good job you guys are a great inspiration.
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
God is good, thank you! Blessed and unstoppable!
@nickbrumley911
@nickbrumley911 3 жыл бұрын
Congratulations on the million mark!!!! Well Done!!
@stevegperkins1189
@stevegperkins1189 2 жыл бұрын
I'm 16 minutes into this and the question that comes to mind is...what if this entire countertop ever has to come off for a new design look? The first layer of plywood screwed in place then the second layer glues and screwed. I don't see how it could ever come off without causing major damage to the cabinets. And MDF and water around the sink...source of moisture. It is beautiful to the eye.
@Suavissimo
@Suavissimo 3 жыл бұрын
Fascinating! Who would've thought you could get such a beautiful marble-like effect with epoxy poured in-place? It was very thoughtful of you to document your process so thoroughly, too, answering potential questions as you went along. The only thing I found a bit dubious was the frame effect over the range. (Framing some countertop? I agree, there's a certain artistic element to the work-but is it really necessary to shout "Hey, this is art!" like that? LOL) These are just matters of taste, though. Everything else looks top-class IMHO. Thanks!
@rockymtnmovies
@rockymtnmovies 3 жыл бұрын
I like this guy, working with his son. He's much more mellow, which is nicer than the spokesman brother. This is super cool and I think I will be trying this out for fun. Thanks for sharing your knowledge and mellowness.
@charleshelton2345
@charleshelton2345 3 жыл бұрын
I noticed when using silicone on the sink, there was a pulling motion instead of a pushing motion. I have heard it is better to push the silicone bead forward to help get better penetration and to help prevent it from shrinking back.
@joerichmar6041
@joerichmar6041 2 жыл бұрын
What is pushing if not just pulling from the opposite direction? Seriously, Im asking.
@charleshelton2345
@charleshelton2345 2 жыл бұрын
@@joerichmar6041 While your statement is somewhat true, pulling the silicone bead will drag the bulk of the bead horizontally along the seam and not allow as much penetration into the crack. Pushing the silicone bead forward while using the caulk gun will allow deeper penetration into the seam. While it may be a little messier to apply, it is easily wiped clean.
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello Charles how are you doing
@chuckkonowalchuk4988
@chuckkonowalchuk4988 Жыл бұрын
What a TERRIFIC video! Fabulous project with an absolutely beautiful finished product. I think maybe the BEST "how to" video I've seen. GREAT GREAT JOB!!!! Thank you.
@trix3185
@trix3185 3 жыл бұрын
I feel like the glossy look is more appealing than the matte for countertops.
@jonsaircond8520
@jonsaircond8520 3 жыл бұрын
I thought the same until I have lived with the top coat for almost a year. I love that I don't care what gets set on or scraped across the counter. The top coat is tough they aren't kidding about the screw test. You do get used to it
@NsRhea
@NsRhea 3 жыл бұрын
I'm actually the exact opposite xD
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
@@jonsaircond8520 thanks for the review!
@amberheywood2603
@amberheywood2603 3 жыл бұрын
As a mom who has to keep a gloss counter glossy. It's too much work. Wipe and walk away matte for me.
@BeAmbitiousNotContent
@BeAmbitiousNotContent 3 жыл бұрын
Agreed! I like the glossy finish. Otherwise, awesome job!!!
@Wicky173
@Wicky173 2 жыл бұрын
I can't believe I sat through all that, I'm a twenty-minute man usually. It was very entertaining and most enjoyable. Five or six years ago I did my kitchen benchtops, Epoxy Glue, sprayed with stone chips, Sanded back and coated with an epoxy coat. It came out just drop dead amazing, but, I have often wondered how it has worn.
@marilynl4321
@marilynl4321 3 жыл бұрын
what a great video! I'm 68 next month and building a home out of a steel building (small), doing a lot myself. I just love projects and watching this has given me more ideas. thank you thank you thank. next up I want to learn how to do molds, it's got to be easy. I'll be doing live edge counter tops and furniture along with epoxy in the shower and perhaps even the floors. Go old ladies! KrazyKate
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Go Old Ladies for sure! You Got This!
@jiwbink
@jiwbink 2 жыл бұрын
THE MOLD AND CONCRETE WAS WORTH THE YIME WATCHING!! THBIG THX FOR THE INFO!! POTENTIAL FOR SAVINGS,GIGANTIC!!
@donproctor3445
@donproctor3445 3 жыл бұрын
Question- since you were building the counters in place would it not have been easier to staple the plastic to the top of cabinet frames before installing the plywood tops? this way you save time and taping. Just cut it loose after you're done with expoxy.
@kylemilford8758
@kylemilford8758 2 жыл бұрын
That is possible. Peeling tape is faster than potentially leaving little bits of plastic hanging out at the joint in the end though
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello Don how are you doing
@TomiBonTomi_2.0
@TomiBonTomi_2.0 2 жыл бұрын
Help them and they will come! Hahaha! Guys, this was so fascinating! You're some kick ass professionals!
@walkerscustomcountertops3144
@walkerscustomcountertops3144 3 жыл бұрын
This was an excellent video! I've watched it now a few times and learned a lot. Ive been having trouble with lap lines no matter what I do, but I think I've got it now! I love the natural finish you get with the ultimate top coat. Great job guys!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you so much Vaghn! Do you have more project lined up? Remember You Got This!
@walkerscustomcountertops3144
@walkerscustomcountertops3144 3 жыл бұрын
@@StoneCoatCountertops yes I do! I’ll be placing some orders this week. A custom bathroom vanity and table.
@caldude45
@caldude45 3 жыл бұрын
I Still have to watch the other two, but the countertop one was awesome and so I am going to watch the other two and I want to say thank you for all that good teaching and knowledge. CB
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you kindly for your support Calvin! Please let us know if you have any questions, You Got This!
@stashagarcia101
@stashagarcia101 3 жыл бұрын
I absolutely love that rock backsplash. Im gonna have to go back and watch that part of the video where you made those molds Ive looked for them online after seeing a video on Russian molds. They had powdered pigments you could use innthe mold prior to pouring the cement and it was crazy realistic when done They were using them for the lower part of the house walls. I really really really want that look on my house but cant swing the $24,000 to do it. Pouring my own pieces is the only way i could pull that off. Id love a link if you have a product video showing how to use whatever product made those backsplash molds.
@MikeQuist-
@MikeQuist- 3 жыл бұрын
It's really affordable to pour your own!
@stashagarcia101
@stashagarcia101 3 жыл бұрын
@@MikeQuist- by afordable can you give me a guage? That large mold you created with multiple sections of the pre-bought sections...how much did that cost to make? Also do you have videos on the product's use? Or a link to the page to purchase it? I have several things i want to cast
@gpcass1
@gpcass1 3 жыл бұрын
@@MikeQuist- I came to the comments to get this same info if its available. What product made those molds? Have you done a video on that yet?
@roadkillmatt
@roadkillmatt 3 жыл бұрын
If you find out could you link I have been searching the site no luck yet
@sanis7849
@sanis7849 3 жыл бұрын
This is the best diy video that I ever seem! Wow! blessings!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Wow thank you so much my friend, do you have any projects coming up? Please let us know if you have any questions. You Got This!
@sierraden57
@sierraden57 3 жыл бұрын
Great project video from start to finish! I appreciate the pro tips too. the concrete mold was genius!
@jameslespaul72
@jameslespaul72 2 жыл бұрын
Your videos and you work is very inspiring, I exopy everything now, thanks for all the tips helps alot
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello James how are you doing
@melissaward9031
@melissaward9031 3 жыл бұрын
I love learning from watching you guys! Xo, thanks so much for sharing all you put into your DIY projects! Melissa
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you so much for your support Melissa! We would love to see some of your work my friend. You Got This!
@Tom-hz9oc
@Tom-hz9oc 2 жыл бұрын
I used Bondo in the 90’s when someone wanted their damaged trim repaired versus the cost of replacing it. Columns went great with it!
@Brucether
@Brucether 3 жыл бұрын
I love your videos. You almost have me convinced I can do this by myself. :)
@johnosman8971
@johnosman8971 2 жыл бұрын
As a learning painter in training years ago, my mentor, friend, & boss, got paid 8 hours if he had to paint fire/smoke damaged exterior brick facing, much like what you guys are doing there, … I had noticed a Wagner sprayer behind the seat of his pickup truck, … something he bought at a flea market to use for spraying stain on wooden fencing, … I swiped it, & mixed it with water, as I experimented using the Kilz, water based primer, over the brick work, (allowing me to keep trying different viscosities, until I found the perfect match for this 10’wide x 8’ tall wall area, … it would have taken me all day, just to cover all of the mortar joint areas both sides which were about a 1/2” wide between the poured concrete brick panels, … let alone the rough surfaces of the brick, … that whole thing took me about 15-20 minutes after I got the viscosity down pat, … so, 2 coats of the Kilz, water based primer, then a single coat of the (Glidden), antique white, got it done in about a 1/3 of the time actually worked, … Boss asked me how my arms were holding up, knowing what a pita brush painting those sections were, but he was truly impressed at my innovative take on it, & actually gave me a nice compliment, … we were friends before I began the painting trade with him, & his mentorship, prepared me when it was time for me to step out on my own, … I wound up being able to take street thugs, & teaching them the trade, … most of them succeeded well beyond my dreams of hiring cheap labor, as I was able to teach them a skill that they could rely on to learn any trade, or job, by the workplace ethics of 1st things 1st, … and finishing touches that spark the imagination, … to go beyond just doing menial, repetitive labor, … the newest guy hired, cleans everybody’s tools at the end of the day, while the others prep tomorrows employ of the same, laborious tasks, … yes, 2, or 3 of them wound up in jail, as they went back to the street corners, but the majority of them gave up their ways of dealing with life in/on the streets, … which says that I accomplished something good out of my life, … beginning, & doing a project or job, where the job tells you what needs to be done, instead of having someone telling you what to do, … now that is where the accomplishment of satisfying labor begins, … no???
@diannegray828
@diannegray828 3 жыл бұрын
Would love to see a high sheen or clear topcoat. I also use resin over my artwork to add a glass like finish. Sometimes, despite my best efforts a hair drops in that I don’t catch till dry. Would be great to be able to sand and do some touch up rather than having to do a second flood coat.
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
We can do a video on that. Have you google searched Stone Coat Art on KZbin?
@amythinks
@amythinks 3 жыл бұрын
@@StoneCoatCountertops So, I thought I would LOVE the UTC Natural. But I found it too matte. (But woah, dang, that top coat is tough as nails! Epoxy is not an option without a protective coat IMO.) But lookie here!! You guys have got a gloss coat. I really like the gloss UTC. I think the sheen is more like a polished natural stone. But of course, the chemistry causes much more texture. Other companies that use a similar product have the exact same problem. If you guys could somehow solve the texture issue (I know it ain't easy) but you really would have the most unique product on the market. The forums are all chit chatty on how to reduce the texture, which percentage of water to use, how many dry rollers to use. So, the problem clearly isn't quite solved. I hope you guys continue to push the product chemistry to help solve the problem. You all are folks for the job! Keep pushing it so epoxy can get better and better at substituting for stone. Thanks for what you do!
@محمداحمدی-ز6ت
@محمداحمدی-ز6ت 3 жыл бұрын
سلام بسیارکارزیبا واقعا درهنرشما موندم تبریک میگم هم بخواطرهنرشما وهم بخواطرآموزش فقط یه سعال مواداستفاده شوده چه موادی هستن که رنگ باهم ترکیب نمیشن
@brucecampbell6186
@brucecampbell6186 Жыл бұрын
Fantastic! You guys are so professional, your work is art and perfection. I love the molded rock look on the back wall, that was ingenious. I also love the use of the cooktop cutout on the back wall. Framing the cutout piece was also a cool idea, though I think personally I wouldn’t have framed it. My only criticism is not really a criticism, but a personal taste. I would’ve made the back wall a lighter color, but to still match the countertops lighter areas. Wow! An awesome job and the customer is very happy. Good job!
@SpecialK2644
@SpecialK2644 Жыл бұрын
That mold was incredible!!
@dollmm23
@dollmm23 3 жыл бұрын
Beautiful job, you guys. Just like everything you do. Came out great. The gloss gives it a really high class finish. Love it!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you so much! What projects have you done? We would love to see! Remember You Got This!😇😊
@pinkyhotmessx69
@pinkyhotmessx69 3 жыл бұрын
What is the material used for the mold?
@CANNIMAGINE
@CANNIMAGINE 2 жыл бұрын
Can this cover old but in good shape formica countertops?
@StoneCoatCountertops
@StoneCoatCountertops 2 жыл бұрын
Yes! Here is a video Mitch show's how to properly prep laminate for Stone Coat Epoxy kzbin.info/www/bejne/gZjWp5mubZuCosU
@lugardstephen4414
@lugardstephen4414 3 жыл бұрын
Nice video but one thing i can't avoid is investing!
@abadiabdullah9243
@abadiabdullah9243 3 жыл бұрын
Job will pay your bills, business will make you rich but investment makes and keep you wealthy, the future is inevitable
@harolddouglas1385
@harolddouglas1385 3 жыл бұрын
My life has totally changed since I started with $7,000 and now I make $ 29,450 every 14 days.
@jacksonwilder8486
@jacksonwilder8486 3 жыл бұрын
I'm new to investing, how do i do it?
@barbie8168
@barbie8168 3 жыл бұрын
@@jacksonwilder8486 I started investment in cryptocurrency late July 2019 with the help of a well-known professional sir Charles Schwab who thought me great strategies on how to trade and accumulate profits
@johavare8097
@johavare8097 3 жыл бұрын
I have heard a lot about investments with Charles Schwab and how good he is, please how safe are the profits?
@dopapier
@dopapier 2 жыл бұрын
This is one of the most thorough and detailed instructional videos I have ever seen.
@chrisarndt6550
@chrisarndt6550 3 жыл бұрын
Hi, Mike! Love this video!!! Thank you once again! You are the best teacher! Just one question? Why didn’t you do the cutouts ahead of the epoxy? Seems like that would have been easier? What am I missing?
@danielpaulus4189
@danielpaulus4189 2 жыл бұрын
Hello, I think the countertop looks better before the topcoat, shinier. What happens if we don't put the top coat on? Where can I find the protective gutters on the site? Thanks
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello Daniel how are you doing
@robraymond4387
@robraymond4387 2 жыл бұрын
You remind me of Bob Ross. He would make me believe that I could paint a beautiful picture with happy trees. Sadly, I still struggle with stick figures. Now I’m 50 and you would have me believe that I could paint (epoxy) a beautiful stone countertop. Here we go again… Thank you for your content and your wonderful inspiration.
@scarfobaggio4463
@scarfobaggio4463 2 жыл бұрын
u open my eyes&mind..how a lot of thngs can do from epoxy.. just need the ideas.. creativity & some trick& efforts n offcoz talent.! I just spent few thousand last year for my new xtended 14ft..kitchn cabinet. same like yrs.. black shinny.. but using concreted cement as foundation &8pcs@ 2x2' x1/2" shinny tiles. Thnks for ur sharing!
@jorgepabon6513
@jorgepabon6513 2 жыл бұрын
Man! You’re a Master, it is a joy watching you make such a beauty I wish I could meet you in person it would be an honor. Thank you for bringing joy to my life
@sh-zv3eq
@sh-zv3eq 8 ай бұрын
Guys, you are terrific! Rocking us with your energy and enriching presentation! Thanking you cannot simply cannot be enough for your work !
@Mindy56743
@Mindy56743 2 жыл бұрын
I love the way you think. The information about the backsplash is priceless. What a amazing kitchen.
@kirbywaaland7659
@kirbywaaland7659 2 жыл бұрын
Did this in the kitchen of my prior house a few years back - completely surprised how well it turned out.
@Real-callsignVIPER
@Real-callsignVIPER 2 жыл бұрын
And I thought I was the only Carpenter that uses his worm drive for everything !! Since I retired, sure miss the days of: "Nail guns a Blazin' and Sawdust a Flyin"
@ruthhaught4296
@ruthhaught4296 2 жыл бұрын
I am taking notes on all the holes and screws you do. I am doing my kitchen and bar and bathroom. I love your techniques. Just Beautiful.
@royreddick2934
@royreddick2934 3 жыл бұрын
You don't have links for anything. I want the link for the silicone mold making kit please, and what brand? Also, awesome video.
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello Roy how are you doing
@egyairwolf
@egyairwolf 3 жыл бұрын
GREAT JOB MAN
@MikeQuist-
@MikeQuist- 3 жыл бұрын
you got it!
@kimmercado-potts752
@kimmercado-potts752 3 жыл бұрын
WOW!! What an Elegant countertop!! I am SO INSPIRED!!!!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thanks so much, now go create with that inspiration!
@koehnnland770
@koehnnland770 Жыл бұрын
I love these dark and light contrast counter tops. I have been in a quandry whether to do light or dark.... i have found the answer! Thank you!
@neestasholistic9068
@neestasholistic9068 3 жыл бұрын
I LOVE this channel. You are so enthusiastic and so clear that the content isn't boring and it's easy to follow! I've already learned so much that my husband is sweating my subsequent planning, lol!
@sajikoliyadi
@sajikoliyadi 2 жыл бұрын
can we place any hot pot after cooking from flame burner on this table top?
@virginiacyrus1432
@virginiacyrus1432 3 жыл бұрын
I love the counter the lady did, it all flows together.
@tonyc8030
@tonyc8030 2 жыл бұрын
You’re the Bob Ross of Counter tops!!!
@MarilynLRead
@MarilynLRead 2 жыл бұрын
Gentlemen you did a wonderful job! I would just as not have your artistic job as the granite I now have! What a difference in cost!!
@DeA2875
@DeA2875 3 жыл бұрын
Mike, you look like to took on a rough neck look, you been workin too hard for the masses bro, we love you
@carlitoslopez8345
@carlitoslopez8345 3 жыл бұрын
Great video, have watched several times and definitely learned a lot.. Where I can find the Gutter system?
@valarieannaliza8805
@valarieannaliza8805 3 жыл бұрын
Love the matt finish!
@MikeQuist-
@MikeQuist- 3 жыл бұрын
I do too!
@MsMadmax1
@MsMadmax1 2 жыл бұрын
With the economy the way it is, anyway for a homeowner to cut corners on a remodel is a really good thing! I love these videos and though I'm well aware that things are never as easy as they look, a friend of mine suggested I do a few small, practice pieces before jumping in with both feet. Practice makes perfect and a little trial and error on a smaller scale will help you achieve the look in this video. Thanks!
@nothankswhatnothing8570
@nothankswhatnothing8570 2 жыл бұрын
You killed it man! Great video I just finished watching the entire video from beginning to end. Great job. Love your energy. Keep it up
@domingofernandez5562
@domingofernandez5562 2 жыл бұрын
You are an artist.
@tntoutdoors_
@tntoutdoors_ 3 жыл бұрын
Let’s Go !!! You asked and I told you what I was getting ready to do and here’s the vid !! You Guys Are Awesome !!!!! Thanks So Much !!!
@StoneCoatCountertops
@StoneCoatCountertops 3 жыл бұрын
Thank you so much for your support! Hope you have as much fun as we did! We love to see your work/project/art as well. Remember You Got This!😃😊😇
@blaketodd1208
@blaketodd1208 3 жыл бұрын
hey guys template and build a plaque for your plugs, remove the faceplate, go tight to box and faceplate over the plaque...looks great and is way easier with no cutting. pretty amazing work fellas
@igobacktoblack2382
@igobacktoblack2382 2 жыл бұрын
This guy is brilliant. SUBSCRIBED ☑️ We are still trying to recover from a house fire from a couple years ago. I can't wait to show this video to my husband. It actually gives me hope. 😭
@davidburns3480
@davidburns3480 3 жыл бұрын
did you see the lady who said these tops absorb everything and anything that is placed on top of them - she says she had to put on a clear coat to harden them?
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello David how are you doing
@johnschnorf6736
@johnschnorf6736 3 жыл бұрын
Been watching for a couple of years. Made my own kitchen countertop and island top with MDF. The countertop came out very good. With the experience of the countertop I was able to improve the island top and am waiting for my next project.
@kevinquinn3763
@kevinquinn3763 3 жыл бұрын
Hey John ! How long did it take you to get where your at. How did you get started. Thanks Kevin
@jimmystrait5745
@jimmystrait5745 3 жыл бұрын
What was the name of your molding material for the back splash?
@lydialas8756
@lydialas8756 2 жыл бұрын
@Hello Jimmy how are you doing
Epoxy Slab Shower with Pink Foam, Come on the Jobsite Real Training
2:37:39
Stone Coat Countertops
Рет қаралды 3,1 МЛН
How to Build and Install Epoxy Kitchen Countertops On Site | Stone Coat Epoxy
1:45:11
Stone Coat Countertops
Рет қаралды 1,8 МЛН
«Жат бауыр» телехикаясы І 26-бөлім
52:18
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 434 М.
Непосредственно Каха: сумка
0:53
К-Media
Рет қаралды 12 МЛН
DIY Epoxy Flooring Over Cracked Concrete Start to Finish | Stone Coat Epoxy
33:10
Stone Coat Countertops
Рет қаралды 1,3 МЛН
$15,000 Kitchen Island
18:31
Blacktail Studio
Рет қаралды 17 МЛН
We Made a GIANT Epoxy River Table
50:29
Stone Coat Countertops
Рет қаралды 405 М.
Stone Coat Color Training: Fractured White Marble | Stone Coat Epoxy
1:24:43
Stone Coat Countertops
Рет қаралды 500 М.
Easy Concrete Countertops | Concrete Countertops How To
17:52
Bourbon Moth Woodworking
Рет қаралды 4,6 МЛН
Epoxy Resin for Beginners | Easy Countertop Design Ideas
16:35
Stone Coat Countertops
Рет қаралды 1,7 МЛН
An AMAZING Epoxy Exotic Pour Over Kitchen Countertops | Stone Coat Countertops Epoxy
29:54
Making a Burning LAVA GAMING DESK
28:46
Drew Builds Stuff
Рет қаралды 6 МЛН
This Video Will Change How You See Wood. I Promise.
2:48:11
Jesper Makes
Рет қаралды 6 МЛН