Epoxy Dome Coating Application On Decals, Stickers, And Printed Images. MAX CLR A/B

[@awardsgiftjie262]

Very good job, I have to say! Especially put the printed label on the cup, and then add the epoxy resin coating, so there is no need to worry that the epoxy resin will flow onto the table top and cause the label to be fixed on the table top.

[@johnsmith-fz3qk]

You made this look so easy! Thank you for the information. Excellent video, exactly what I was looking for 👍

[@TheEpoxyExperts]

Haha.. thanks. Practice, practice, practice. I'm glad you found value in its content. We have more video tutorials all relating to epoxy resin use and application. Thanks again.

[@gwadamannnsu8855]

Super..jolie technique✌✌✌✌

[@Rangvishwa_Enterprises]

very helpfull for Logo and Branding

[@hay_Z2021]

Is this mixture friendly with electronics? Could I waterproof an arduino camera with this? 🤔

[@TheEpoxyExperts]

If the camera has no moving parts, you can use the MAX CLR resin as a clear potting or embedding resin. When the resin cures, it is permanently bonded to the Arduino PCB. We have a customer that uses this resin system for potting and encapsulating lights and underwater cameras for deep-water diving and cinematography. kzbin.info/www/bejne/bGaYcmmEmtuUl8U

[@markhilltaco4079]

Thank god for german people u just saved me

[@TheEpoxyExperts]

"He who dies with the most toys wins a Porsche ..and a set of German cutlery". JK, I own both, and they know metal alchemy. Thanks!

[@luv14lyf]

How do you keep it from absorbing into the paper so non printed/ white areas don't look translucent?

[@shakilshikalgar413]

Nice sir

[@dildorasaidova7695]

What items were used?

[@TheEpoxyExperts]

The image was downloaded and color laser printed on photo paper. You can use glossy or matte finished paper, actual photographs, or posters. The thicker the paper stock the better to prevent curling once the MAX CLR epoxy cures. All the other items needed are noted on the video demonstrations. Here is a link to the MAX CLR 24 ounce kit available at our eBay store; www.ebay.com/itm/223471668009 On the description page are more detailed application and use instructions. Thanks.

[@myoneblackfriend3151]

Fun!

[@Rangvishwa_Enterprises]

Its very helpfull for Branding

[@alexanderomarnavasrocha9585]

que pegamento uso??

[@markhilltaco4079]

Can I use polyester resin?

[@TheEpoxyExperts]

Polyester resins will limit the type of printing you can use to print the image. Polyester utilizes styrene monomer in its formulation, which will cause the printed image to run and bleed more readily compared to epoxy resins. The shrinkage factor may also be of concern since polyester tends to shrink more as it cures from a liquid resin to a solid plastic. Too much shrinkage will cause curling and warping to occur. Other factors such as polyester flammability, strong odor, and durability make epoxy the resin system to use over polyester for this application. The resin system used in the video is the MAX CLR A/B epoxy (www.ebay.com/itm/223471668009). It is a low toxicity formulation that is also FDA compliant for direct food contact coatings. Once fully cured, MAX CLR is inert, making it suitable for casting body jewelry that comes in direct contact with skin and not causes an allergic reaction to occur. More MAX CLR videos; bit.ly/3tWcTwT Thanks.

[@markhilltaco4079]

@@TheEpoxyExperts wow what a reply ! thanks

[@otunbaolatunji7429]

Pls what the name of the two substance that was mixed

[@kongartsvg]

Where can I get a scale likw the one you use.? Do you have a link to purchase

[@TheEpoxyExperts]

Here is the link to our website and eBay store; MAX CLR 24 ounce kit theepoxyexperts.com/shop/casting-resins/hard-casting/max-clr-24-oz-epoxy-resin-food-safe-fda-compliant-clear-high-impact-coating/ eBay Store; www.ebay.com/itm/223471668009 Or Call Toll-Free 877 403 8008, Monday To Friday, 9 am To 4 pm PST if you wish to place your order directly. Thanks

[@PeepGamePopoff]

Can you make patches like this

[@TheEpoxyExperts]

Yes, I'm sure it can be done. If you plan to use a patch made from fabric, it needs to be sealed or impregnated with the MAX CLR resin first to seal the porosity. Once cured, place the patch on a level surface and then do the dome coating application as demonstrated in the video. For a dome coating to work, there are two factors that are important. One, the decal, image, or patch has to be non-absorbent, and secondly, it has to be flat enough to create the meniscus or domed resin.

[@brookeweaver426]

What kind of paper did you use? Did you have to seal it?

[@TheEpoxyExperts]

laser photo paper was used made especially for use with laser printers, not inkjet devices. It is also called digital paper, and it comes in a variety of finishes. Laser paper has a special coating that seals porosity and prevents absorption of the epoxy dome coating.

[@Rangvishwa_Enterprises]

Attractive Product

[@zakiakakza4412]

Produit liquide c'est un resine ?

[@TheEpoxyExperts]

Oui c'est le cas. C'est un système de résine époxy que nous fabriquons et vendons. Boutique eBay ; www.ebay.com/itm/223471668009 Boutique Amazon www.amazon.com/dp/B07MQQW553

[@Aemanjaved]

can i use it on painted rocks?

[@TheEpoxyExperts]

As long as the rock is flat so the resin will self-level. When applying an epoxy coating over a previously coated or painted surface, you need to check the wettability of the surface to make sure the epoxy cures with good adhesion. Check out this video demonstration to determine wettability; kzbin.info/www/bejne/aIa4haKKarOGZ7s

[@djmorgan8783]

I'm gonna have to give you a call I need an emblem made for my center console on my motorcycle

[@soumayalaouar5262]

C est quoi les deux products

[@TheEpoxyExperts]

Les deux produits sont la résine MAX CLR et le durcisseur. Voici un lien vidéo de playlist où des instructions d'utilisation et d'application plus détaillées sont disponibles pour votre examen. Je vous remercie

[@martinreinaldosuarez5464]

Lo único defectuoso que vi, es que removió muy rápido y lo lleno de burbujas y lo aplicó asi