Epoxy Free Glitter Pen Tutorial | Pencil Style

[@AlisonCrafts]

Did you know I sell a pen adapter on my website for your tumbler turner? craftingthegoodlife.com/shop/penadapter

[@JBEBELUV]

Will you be restocking ? I need the 3/4 inch one 😩 also the glitters are sold out as well , do you have other recommendations for those colors ?

[@sousracris]

I purchased the MiLefo Tumbler Cup Turner you recommended and I would love to purchase your pen adapter. What size would I need to purchase to fit this exact tumbler: 3/4 inch PVC, 1/2 inch PVC, or 20 mm Pipe? Thank you!

[@AlisonCrafts]

@@JBEBELUV later this week! And I think there is a pencil pack on her site?!

[@AlisonCrafts]

@@sousracris 20 mm 🥰

[@sousracris]

@@AlisonCrafts Thanks. That is extremely close to 3/4 (19.05mm). Does it have to be perfectly sized? Also have you ever replaced your tubes on this model turner?

[@ateamcraftyboutique4930]

Thank you for introducing me to brite tone!

[@AlisonCrafts]

so glad you're here!

[@taramccurry5320]

I ordered everything for this! My glitter just came in today and now I am waiting on everything else...this will be my first project. Thank you so much for the tutorial...

[@staciacollins5672]

Have you ever made a notebook paper pen? I would love to see it.

[@jenniferhinojosa129]

Hi 👋 new to your channel. Loved this tutorial. Thank you!

[@AlisonCrafts]

Thank you!

[@jenniferweidman7923]

I would love to see more pen tutorials! I just purchased Bright tone and glitter glue from Crystalac and I want to try the pens!!!

[@lorigaddie2701]

Yes more pens please. I love watching your tutorials thank you

[@cindycross2369]

Love these pens.very new to pens.Do you use epoxy at all

[@654Bearcub]

Thank you for this, and yes please more pen tutorials

[@jaydejones5292]

So cool!!

[@lobstertartare7869]

Very cute. Excessive amount of work but very cute.

[@rebeccaegerton]

Love this video... quick and to the point

[@karenhadden4980]

Too cute!

[@AlisonCrafts]

Thank you 💖

[@poshglampristine4044]

Looks amazing

[@AlisonCrafts]

Thank you :)

[@courtneydickerson9034]

I’d love to start doing these!! I’ve always loved trying new things but haven’t been myself lately

[@AlisonCrafts]

you got this!!

[@vittlesandvibesasmr]

These are amazing 🤩

[@AlisonCrafts]

Thank you!

[@sandradowell9666]

Can u use gel nail polish and a UV lamp to seal a pen wrap??

[@654Bearcub]

Hello, I’m new to this craft and I love the “pencil” pen, I was wondering what grit sandpaper you would I use, please

[@AlisonCrafts]

I use 220 to prep and 400 every other time!

[@lesliehenson5524]

Can you use GrandFinale instead of Bright Tone so that it only has to dry for two hours? I don't make tumblers, so my first attempt at anything glitter. As long as you have a good sprayed base coat, can you use cheap acrylic paint as a colored base coat?

[@simplelifeofsusan]

This is the best!

[@bev2hawky]

Another great tutorial thanks Alison,could you tell me the width of the washi tape please

[@AlisonCrafts]

it's about 3/8 inch!

[@courtneynichols8458]

What font did you use?

[@Monica-xq4ev]

Can I use acrylic paint for the base coat?

[@taramccurry5320]

Do I need to spin my pen after I put the waterslide on?

[@poteatjessica]

THANK YOU!!!! I have been looking for confirmation that the water slide could be used for the names only. I am having a HECK of a time cutting such small designs out on my silhouette. this seems like the PERFECT solution. However, do you wait until you have a full sheet of names?

[@AlisonCrafts]

it's sooo much easier! I usually throw names on a sheet with other designs if i can

[@EP-ms8vj]

Do you have to use a pen turner? Thank you for really showing and explaining how to.

[@AlisonCrafts]

Nope, i just prefer too!

[@dekoshastutorials8371]

Okay so thinking bout using Britone so you don’t have to mix it like you do epoxy ?

[@AlisonCrafts]

No mixing!!

[@artzmind7407]

love it

[@hwrhmom]

What program do you use to do your names? Is that font I love Glitter? What size do you recommend doing the names?

[@nunyabeez2482]

Hello, I am currently trying out making some glitter pens with Brite Tone. I am having a difficult time finding what needs to go on the care cards. Do you have an example that you can reply with? It would be very helpful. I love your channel!!

[@alejandrinagutierrez5221]

Hi Alison! Do you have a tutorial on how to use waterslide paper? I have never used it before. Thank you in advance!

[@AlisonCrafts]

i do! kzbin.info/www/bejne/mIawaHV7gayZrpY

[@muritzuh05]

How do you make the glitter glue ???

[@meshella76]

What is waterslide? I'm new to all of this

[@3ella_ciao821]

Hello a quick question about the glitter glue. Can you please explain how you prepare it.? Please

[@AlisonCrafts]

to spray? in the spray bottle i mix 2 parts glue with 1 part water :)

[@laurahelbig1602]

@@AlisonCrafts Can I use a tacky glue instead? I just placed an order for the Brite tone - I didn't realize the glitter glue came from the same company :/

[@laurafaulk6822]

Where did you get your spray bottle for the GG?

[@alexandratavarez3101]

Hi!! In the video you said that you used Universal White with paint and that you could use other paints, what other options I could have as a replacement of the Craftnique Colors?

[@AlisonCrafts]

do you mean to tint the Universal White? Those are really your best option! but as long as you have a base coat (spray paint or uw) you could use acrylic paint to make it colorful

[@katrinaknapp6933]

Once the final coat of brite tone is dry, can the pen be used right away?

[@sousracris]

I noticed you didn't mention anything about sealing your waterslide. Do you only do that on your tumblers? What if it's a colored waterslide, should I seal that? Do you let your waterslide dry for 24 hours before applying BT? Thanks.

[@AlisonCrafts]

You need to seal waterslides if they are printed on inkjet printers. I seal mine and let them dry 24 hours. Apply to surface and let dry another 24 hours. then brite tone. Here is a tutorial: kzbin.info/www/bejne/mIawaHV7gayZrpY

[@nancymartinez7303]

Did u do both britetone and glitter glue on same one

[@AlisonCrafts]

sometimes i apply my glitter with brite tone and seal with the glitter glue. then do my coats of brite tone

[@taramccurry5320]

Looks like a future project for me.. I would love to make these for my coworkers. How many can you make at a time? I don’t have a turner

[@AlisonCrafts]

You don't need to spin them :) You can make as many as you have room for!

[@taramccurry5320]

@@AlisonCrafts I just ordered everything (including the turner)...I am so excited to do this. Also, does the CrystaLac need to be room temp or can I make these in a garage?

[@AlisonCrafts]

@@taramccurry5320 you want it to be above 68 degrees!

[@jennifercortez518]

Do you have a list of materials, even better links, for all the things needed? I tried to look through the comments to find it all, but was getting a bit lost. Thanks!

[@AlisonCrafts]

Yes! www.alisonsullivan.co/gettingstartedchecklist

[@AnaReese]

Hello! From what I gather it takes a few days total to make the pen because of the dry time in between? When you mention 3 coats of brite tone , there’s a wait time of 4 hours in between each coat? Thanks

[@AlisonCrafts]

How long it takes really depends on your own personal schedule and skill level. But yes, it takes me about 5 days. Each coat needs 4 hours to dry.

[@jennifernagel6588]

What is the ratio for your glitter glue spray? And you use that to seal the glitter?

[@AlisonCrafts]

2 parts glue to 1 part water! that's what i use to seal the glitter.

[@riagray7521]

so my pens are black so the button and bottom party black i just put those back in??? don’t paint them

[@thomj333]

Do you have a shop where you can order pens?

[@semutehrogers2614]

How did you decide between using bright tone vs glitter glue to apply your glitter?

[@AlisonCrafts]

So i've been using brite tone for ay ear and a half and the glitter glue is a new product. I'm just very used to using Brite tone :)

[@Hbird12]

I have the bright tone and it take like forever to finish one project. To long waiting..

[@elainezuniga4480]

Where do u buy washi tape , & what size is your washi tape

[@AlisonCrafts]

it's about 3/8 inch and i think it's from michaels

[@pochoinpink]

I noticed in your other pen video you applied the glitter glue over the glitter with a brush and in this one you sprayed it. Do you find the spray bottle method to be easier?

[@AlisonCrafts]

I spray when i have multiple colors of glitter so they dont mix :) either way works!

[@pochoinpink]

@@AlisonCrafts awesome. Thanks so much. I got sucked into a bunch of your videos today and just ordered stuff to try making the glitter pens. Lol 😁

[@christinegonzalez-holguin9845]

how long does it take for the brite tone to cure?

[@AlisonCrafts]

it's hard enough to use after 5 days but will continue to harden for up to 30 days

[@christinegonzalez-holguin9845]

@@AlisonCrafts thank you!! I make tumblers but i want to try making glitter pens and i want to try brite tone!!

[@LauraJayne64]

What font and size did you use on your water slide?

[@AlisonCrafts]

i usually make it about 1/2 inch tall and the font is pinky latte: www.creativefabrica.com/product/pinky-latte/ref/455608/

[@coolbabe459]

I see you have pens spinning in the background. Does it matter if they hang dry after you have applied glitter and brite tone or if they spin dry? Thanks!

[@AlisonCrafts]

You can hang them! I just prefer to spin :)

[@michellemartinez2618]

Can u use acrylic paint

[@AlisonCrafts]

not as a base, but you could paint it over a primer

[@elizabethtate4706]

@@AlisonCrafts So acrylic paint will work for the pink and yellow areas, but not the first base coat that needs to be spray paint?

[@vanessaperez3170]

I love all your videos and I have changed from epoxy to crystalac cause of you love it Can you PLEASEEEEE do an alcohol in pen tutorial please not just wood grain but other Please and thank you

[@AlisonCrafts]

Yes! i just made one, hopefully i recorded it LOL if not i'll film one this week!

[@vanessaperez3170]

@@AlisonCrafts awesome thank you

[@stacycunningham7998]

How do you make the label?

[@AlisonCrafts]

Either vinyl or waterslide paper

[@melissajohnson8071]

I’m new to all of this, would you say the brite tone have a very bad smell? I was really surprised when you didn’t use gloves while working with it.

[@AlisonCrafts]

No smell at all. No toxic fumes or hazardous ingredients 💖

[@melissajohnson8071]

@@AlisonCrafts omg that’s amazing!! I live in MN, so I’d have to craft in my house during the cold months. I’ve been so worried about any harsh smells. Thank you so much!!

[@CarlieCrain]

How do you get the font like that, I bought it and I can’t get the hearts or tails

[@AlisonCrafts]

Here is how i do it in silhouette studio (you'll want to fast forward a bit!) : kzbin.info/www/bejne/p3aqZYFtZtGKaq8

[@katieshackelford9204]

Where do you get brite tone from

[@AlisonCrafts]

thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN

[@bev2hawky]

What font on the names thanks ? Very classy

[@AlisonCrafts]

www.creativefabrica.com/product/pinky-latte/ref/455608/

[@cindycross2369]

What is waterslide

[@elainezuniga4480]

What spray paint did you use?

[@AlisonCrafts]

Rustoleum 2x

[@elainezuniga4480]

What size is your washi tape &Where do you buy it?

[@leonilalucio7706]

How can u fix an epoxy pen?? My vinyl lift up???

[@AlisonCrafts]

you can try to sand it down and take off the vinyl?

[@mariasolorzano5606]

What name do you named that’s later tex

[@helenc4228]

Did you have to sand the pen at the very beginning ?

[@AlisonCrafts]

Yes! Sand really well and I spray painted it.

[@helenc4228]

@@AlisonCrafts Thank you so much!

[@monicalancaster9871]

Did you sand the whole pen or just the plastic part?

[@lesleypayne2736]

Which Brite Tone do I need to order?

[@AlisonCrafts]

thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN

[@deeannet]

my pens won't retract after putting together. pleaese help

[@AlisonCrafts]

Take an x-acto knife and clean out the inside

[@tammyhutton7224]

what kind of tape did you use??

[@AlisonCrafts]

Washi tape

[@snkdesignsbykelleyvanscyoc2039]

Does the bride tone smell?

[@AlisonCrafts]

No it does not and there are no fumes (which is more important!)

[@melindaparrott9823]

More pen tutorials

[@AlisonCrafts]

any specific requests?

[@amygomez9105]

Dang it maybe thats why I had a hard time starting it off.

[@nesbithmendoza9968]

Quiero saber todo lo que dice en español! 🆘 ❤

[@louisabailey1800]

Hi what size is the name ?

[@AlisonCrafts]

1/2 inch tall

[@terryfogle3623]

Which Papermate inkjoy pens are you using?

[@AlisonCrafts]

These ones! amzn.to/3tsCfm2 but check locally at walmart/target to compare prices!

[@CrystalWilliams-rt3zm]

Your discount code ALISON 10 doesn’t work for the glitter

[@AlisonCrafts]

Alison10 should work. you do need to have a $50 purchase!

[@CrystalWilliams-rt3zm]

@@AlisonCrafts no

[@veronicajuarez3684]

Hi! For the decal what’s the measure!thanks