Epoxy on Phone Holders

[@amruthavarshinig1650]

Did you use just normal glitter which is available in powder ?

[@LoveeJm]

Where did you buy your scale ?

[@karenpaul4594]

you don't seal glitter first then epoxy? Also where did you get your torch from? Nice video Thanks

[@ElleBeeCreates]

You can clear coat the glitter first if you’d like. It’s not typically necessary unless you’re working with a chunky glitter that repels the epoxy. It wouldn’t hurt to do it every time but it’s not required. The torch is from Harbor Freight.

[@karenpaul4594]

@@ElleBeeCreates Thank you!!! :)

[@reginemadayag7190]

Hi! Does epoxy resin really cure after a long time compared to being cured in a silicone mold?

[@ElleBeeCreates]

I’m not sure I completely understand your question. Here I’m using a 2 part epoxy resin that takes about 24 hours to set for use, and is fully cured after 30 days. You can use it in a silicone mold, it sets the same.

[@spunkywarrior777]

Does modge podge work too???

[@ElleBeeCreates]

Probably! Just don’t apply it too thick

[@CatnTanya]

Where do you get the blank pop sockets?

[@ElleBeeCreates]

AliExpress

[@OceanSol]

These are beautiful. I've been looking to get into epoxy and I think this is just the thing to start with! Thank you :)

[@Lazombie13]

How can I order from you

[@ElleBeeCreates]

Thank you but I don’t sell stuff, I just show others how to make things

[@Lazombie13]

ElleBee Creates ugh I want one😫 you should do Etsy very good work

[@rainh8012]

Where do you order the pop socket in bulk?

[@brandyscott5984]

If you want something on it after the glitter, vinyl design or whatever, can you put a 2nd coat of epoxy without it being bulky?

[@ElleBeeCreates]

I would do the first coat really thin, then apply the decal, and then do a normal top layer.

[@brandyscott5984]

Thanks!

[@youngncrazyjes]

@@ElleBeeCreates how long do you have to wait for the first coat to dry before you can put the decal on it? Also, how long should I let the second / normal layer of epoxy dry before use?

[@ElleBeeCreates]

Jess I personally would wait 24 hours as you don’t want to transfer tape to cause issues upon removal. All epoxy resins are a little different but most of the ones I’ve worked with have a 72 hour cure time before it’s recommended to put the item into use, no matter what you’ve used it for (cups, counters, keychains, etc)

[@youngncrazyjes]

@@ElleBeeCreates thank you for your quick response!

[@sarahgermick9634]

Where do you get the blank holders? I am trying to get them in bulk since most things are cheaper that way.

[@ElleBeeCreates]

Sarah Germick AliExpress

[@RoseLilyMusic]

Amazon sells blanks

[@DarianVaughntv]

I can’t find the pop sockets on AliExpress can you post a link please

[@patriciaclinkscales6384]

Darian Vaughn wholesalephoneaccessories.com

[@thefabulousaubrey]

Have you tried putting them in a UV nail dryer? I saw someone say that it works, but I can't see how it would

[@ElleBeeCreates]

You can use UV resin which is cured under a UV light such as those used for curing UV nail gel. Doesn’t work with regular 2 part epoxy. I’ve done plenty with UV resin tho. It works fine so long as you are using the right wattage light for the right time your the particular gel you purchase. It can’t be applied in super thick coats, works better in multiple thin coats.

[@thefabulousaubrey]

@@ElleBeeCreates thank you for clearing that up for me👍

[@KelseyOnSocial]

Where did you get the phone holders

[@versatility1913]

Do you have FB?

[@KelseyOnSocial]

versatility1913 yes

[@ElleBeeCreates]

Aliexpress

[@jrr717]

Hi ElleBee, do you think I could epoxy over crystal stones?

[@ElleBeeCreates]

You can but it may require a few coats to get enough epoxy built up to encase them

[@jrr717]

@@ElleBeeCreates Thanks.

[@plaidpanda]

This is terrific, I just love this idea! Can you please tell me, is the blowtorch optional? Will they still cure without it? Thanks!

[@ElleBeeCreates]

Yes it will cure without the torch, but it’s used to pop the bubbles in the epoxy, otherwise it will cure with the bubbles which can detract from the final appearance.

[@plaidpanda]

@@ElleBeeCreates Ok, I understand. Thank you ❤️

[@acreativenative6771]

if instead of glitter i want to do it by a putting a picture, will it work?

[@ElleBeeCreates]

It should. I would experiment with how to attach the photo. Maybe between two layers of epoxy? I know a lot of people choose to do sublimation for photos.

[@emmabosquez576]

What glitter adhesive did u use.

[@ElleBeeCreates]

It’s from Backfist. There’s a link in the video description. Thanks for watching!

[@Benny46drift]

with the epoxy do they still fit into the new car vent or wall mount holders?

[@ElleBeeCreates]

I’ve honestly never tried.

[@WatchDesigning]

Really nice , great video. Can you please share the expoxy name and where to get it. THANK YOU

[@ElleBeeCreates]

Thank you. There’s a link in the description/caption for the video. I believe it’s the first link shown

[@samanthajohns2683]

What do you do if the resin runs over the edge and hardens?

[@ElleBeeCreates]

You could try trimming it with a knife, but you’ll have marks since it’s already cured.

[@katelynrodriguez118]

do you sell these?

[@ElleBeeCreates]

I do not sell any of my hand made goods any more, just make videos.

[@tinacolecampbell]

Where did you get your blank “popsockets”? I didn’t see that in the description.

[@ElleBeeCreates]

AliExpress

[@tinacolecampbell]

Thanks, I just saw that on another comment and I am looking for them now on AliExpress. 😊

[@annagodfrey4689]

I’ve missed your tutorials. Glad you posted this 😊

[@ElleBeeCreates]

Thank you! I’ve taken some time off to spend with my daughter before she leaves for her first year of college but will be back at it much more starting in September. Thanks for watching!

[@dhightide]

where do you get your blanks??

[@kim11824]

Dhgate has them for .27ea

[@afreedomwriter]

Great vid. Where did you get your scale?

[@ElleBeeCreates]

Thanks. I got it from Harbor Freight

[@sandragarcia4490]

Is epoxy and resin the same

[@ElleBeeCreates]

The terms are used interchangeably but not all epoxies/resins are the same. They come in many types for many different purposes. There are casting resins, floor and counter resins, adhesives and more.

[@brasiliamedina]

It’s been 4days since I did this and still wet. Followed every instructions and still wet

[@ElleBeeCreates]

If it hasn’t cured, then your ratios were not correct or it wasn’t thoroughly mixed. Make sure you’re following the directions for your specific brand of epoxy resin, as not all are the same, and not all can be measured by weight.

[@heatherdeal2648]

What is the beautiful GLITTER on the 2nd one you did?

[@ElleBeeCreates]

All of them are listed in the description with a link of where to get them ❤️

[@rickytransforma3901]

You desrve a big hug dear

[@ElleBeeCreates]

Thanks for watching

[@chitraramesh8240]

So pretty

[@shenethomas4833]

Where did you get the blanks?

[@ElleBeeCreates]

You can get them on AliExpress

[@destinymcneil8671]

What did you look up to find them?

[@ElleBeeCreates]

Phone grips

[@marlenevicario8318]

Hi..Do you just glitter and epoxy the top flat part? Or do you also put it on the edges? Thank you

[@ElleBeeCreates]

I just do the tops, they are so thin, there’s not really a side to glitter.

[@amandamoore3944]

You would want to wait 72 hours for a full cure

[@emma-nd6fc]

I just take my popsocket and paint it with clear nail polish and while it's still wet I dip it in glitter and let it try

[@AlliiMariie]

Wait does that work better than mod podge? Lol

[@ambermanning2847]

Do u sell these ? They r so cute. I rep for a nail strip company I'd love for u to make me one with our logo on it

[@randinicely1857]

Yas girl yassssssss

[@CloudzyVr_]

You shouldn't weigh epoxy, you measure

[@ElleBeeCreates]

For some brands, that’s true. However the brand I was using can be measured or weighed. Always read the directions included with the brand you’re using, as they are all quite different.