Epson ET 2400 Print Head Cleaning Manually, Replace, Repair L1201, L1250, L3110, L3210, L3215, L3250

[@manoamana67]

If this doesnt work for you, perhaps try watching "Epson Eco Tank Clogging Trouble Shoot part 1 and part 2". Those videos address the lines (tubes) that carry the ink from the tank to the heads. The instructions are very good (although I need to put the CC on because I sometimes can't understand what he's saying). I think my lines are clogged and not the heads, I havn't tried it yet. The video uses printer ET2720 which is slightly different from my ET2400. This current video uses the ET2400 so I came here to see how to get into the guts of my printer (ET2400) which is slightly different. So I'm hoping by using the information from both videos Ill be able to fix my problem. Thank you to these two KZbinrs for their very informative videos.

[@CopyPrintScanChannel]

Welcome! I hope you fix it easily.

[@leothecat4681]

Broke my printer. Thanks for that. No more Epson for me

[@CopyPrintScanChannel]

Sorry to hear that, hope you can get it fixed!

[@CopyPrintScanChannel]

Just reconncet wires properly, if anything broken that is not very important, even then printer works.

[@c.crystalBadree]

Can you help with an issue with my Epson L3250 printer? Please, all the lights are blinking non-stop.

[@morkats]

Thanks!

[@CopyPrintScanChannel]

Welcome!

[@MichaelSharpTechniSmart]

Thank you for this video. I was debating whether to purchase the L3250, which my local supplier has in stock. After seeing this video, I am confident it can be self-maintained. We live in a 90% humidity climate and I wonder what frequency we should be printing with it to avoid clogging the print head? I have subscribed.

[@jayangela44]

Thank you for the instructions. I had quite a bit of difficulty doing this (especially with the closing mechanism) but I managed to do it. However, my printer is still not printing yellow or blue. Can you please tell me what my next steps are? I've already done the auto nozzle cleaning and power cleaning several times as well as this manual cleaning. Thank you.

[@CopyPrintScanChannel]

I think it should have worked. You can give reset to printer for 24 hours and then test print. If needed do power cleaning again and give reset for 12 hours. If that fails then print anything having a lot of yellow and blue colour so that it stimulates the ink flow.

[@jayangela44]

@@CopyPrintScanChannel thank you. Great advice.

[@jayangela44]

@@CopyPrintScanChannel oh, what do you mean by reset though? Do you just mean waiting that amount of time?

[@omerfarukeroglu1892]

sizi izleyerek sökme, temizleme ve montajı eksiksiz ve hasarsız yaptım. ancak işlem sonunda 2 turuncu ve 2 yeşil ışık yanıyor ve yazıcı işleme geçmiyor. ayrıca yazıcım L1250 olmasına rağmen bilgisayarda et-1810 adında gözüküyor ve "epson yazıcı ismi farklı ürün seçilmiştir" şeklinde hata veriyor. bi öneriniz varmı dır ?

[@sunslkhagva]

hello thanks for your video. There is a problem in here can you help me with this? After all this cleaning process i plug in printer to power and then power button and red lights are not get stable. Even if i switch on and off, its not get stable that lights, what can i do?

[@CopyPrintScanChannel]

I think the wires inside may be not connected or they are loose. Just have look inside if possible. But before that just unplug the power cable and restart it. This may fix the issue.

[@wellmaxmakwarimba4264]

Nice , mine worked thank u

[@mariapilarlasiste-quinata1588]

11:33 I followed every direction but when i turned it back on the yellow and orange lights just keep flashing. What do I do now?

[@CopyPrintScanChannel]

It may be a wire is not connected or connected wrong.

[@sophiahitch726]

@@CopyPrintScanChannel I think every wire is connected but it still keeps flashing

[@Naftali_1]

It helped me a lot, thank you very much

[@parminderkaur7034]

i did clean my printer with the help of this video but printer doesnt clean clear yet. so what else should i do?

[@CopyPrintScanChannel]

Try doing power cleaning.

[@oldfarmhand7714]

Hi this was very informative just to get it apart! In your video you said you could get a replacement print head could you tell me where? I have tried to find one but I cannot

[@CopyPrintScanChannel]

Hi you can buy them from Amazon, if not there then ebay. Its hard to find these. I hope thos helps you.

[@oldfarmhand7714]

@@CopyPrintScanChannel Thanks for the help

[@greentree8995]

For some reason i cant put the screws back in from the first step??

[@xviewmytubex]

How long or how much printing before you encounter clogged lines/other ink/quality issues? I've just started using my ET-2400 and after 5 prints my colors are very light (I used high quality settings/photo paper/premium photo paper/etc settings also). My prints look nothing like the color graphics I'm using, and for sublimation the results are same. Any tips? Thanks!

[@CopyPrintScanChannel]

I think thats not normal. New printer should be working correctly. Best is to do the auto printhead cleaning and or power cleaning to flush the ink. If there is any air in the pipes that will come out. Also copy a colour page and see if that works. Also do printhead alignment. Because its new so ink jam or clogged ink may not be there. Hope that works for you.

[@judelyncomesing9330]

Thanx it works❤❤❤

[@keishapaul3765]

Hi I did the manual print head cleaning and the printer is not printing colour

[@CopyPrintScanChannel]

Do auto printhead cleaning or power cleaning and wait for 24 hours to see results.

[@lydiaperez1613]

Did what he said work for you my printer is printing anything at all color after I did this video also

[@luigifabi]

ciao per cortesia, per evitare errori mi sai dire qual è la sigla esatta per la sostituzione della testina di stampa di ricambio per una stampante Epson ET 2810 in Europa) o L3250 ( America). GRAZIE mille

[@Horserider_rae]

Hi I did this and my yellow is still not printing, any advice please?

[@lydiaperez1613]

Same problem did you get it fixed .?

[@user-ut8dd5hm7f]

what does it mean when all lights are blinking after a manual cleaning

[@CopyPrintScanChannel]

It may be a loose or wrong connection. Check if all the wires are plugged in correctly. Before that just unplug the printer power for 10 minutes and restart it. If that works then ok if not then check the cable connections near printhead.

[@KristinSiewenie]

How did you get the print head moved to the middle?? That’s an important step you missed

[@richardyelviel6115]

He tapped on copy button, then disconnected the printer power cable from the power source

[@wellmaxmakwarimba4264]

U can force it will move

[@haleydunkeson5238]

I have done all of this. It’s still not printing anything. Just white pages. Help!

[@wellmaxmakwarimba4264]

I will help

[@lydiaperez1613]

Omg did you get it fixed same thing happened to me

[@lydiaperez1613]

@@wellmaxmakwarimba4264 help me also please lol

[@vernenarussell4970]

Same here

[@bassamhelalfy]

I dis that and still didnt print black

[@LwkyMnstr]

How to clean the long plastic strip of the print head sensor? It's full o ink and I can't remove the ink stains.

[@jackkraken3888]

Try isopropyl alchohol. You can also use the more cheaper rubbing alcohol but they might leave stains.

[@leonardocabrini3934]

EXCELENTE VIDEO!!! TKS!!

[@monirdaoula8432]

LEGEND

[@vassilisorfanos4092]

you install wrong the print head cables at the upper left

[@syedmazharulhaque6437]

Thanks Sir

[@CopyPrintScanChannel]

You're welcome!

[@_kimvisible]

6:51 you jumped 😢

[@dinabraganca9659]

he plugged the ribbon cable wrong and turned the camera off to untwist the cable.

[@AnnLippert1]

nope im not opening my printer.

[@forestbr34th54]

Don't do this, lest you want to break your computer. I'd recommend a technician.

[@heinrich183]

And then you can throw the print in the trash because it's broken

[@kuikukui5077]

How the fuck can put that shit to the middle?

[@naytahlee]

Push the copy button, wait a second, then unplug the power.

[@roushankumar6823]

Bahut bakwas printar h