Epson ET-8550 A3+ poster board printing via rear paper feed. Using 13x19 Epson Matte board board

[@kevinwarner959]

Thank you SO MUCH. Imagine not being able to find this sort of information and instructions on the Epson website. Wow.

[@KeithCooper]

Glad it was helpful!

[@kotsbrown]

Thanks Keith. Just got one of these beauties and nervous about printing on thicker media. Your video was informative and given me confidence!

[@KeithCooper]

Glad I could help

[@sharons4700]

Keith, OMG, I have been searching everywhere trying to figure out what to do after I take the rear feeder slot off. I could not finish my printing until I found your video. You are so thorough. Thank you!

[@KeithCooper]

Glad I could help!

[@micheldupaul7768]

Thank you Keith for your interesting presentations, you do a generous job which is your trademark. Which allows us to know our ET-8550 printer better.

[@KeithCooper]

Thanks!

[@leesawachsman976]

Well you sure saved me. I have an Epson ET-8500 and was trying to print out 5x7 thick card stock for invitations. And that last little tip of taking the grey thing off was the trick. I could not see that clearly on the back. Thanks so much!

[@KeithCooper]

Thanks - Glad I could help!

[@hazelann63]

Fabulous, been fighting with my printer all day

[@KeithCooper]

Glad to help

[@funkam0nkey]

Great video. Thanks for taking the time to create and post.

[@KeithCooper]

Glad it was helpful!

[@funkam0nkey]

Very helpful. Just picked this printer up as a does it all option for all of my printing. Your videos have been a great help.

[@KeithCooper]

@@funkam0nkey Thanks - there's more info [and all the videos] in the main [written] review www.northlight-images.co.uk/epson-et-8550-printer-review/

[@samuele5327]

Besides showing us another brilliant video lesson I’m always pleased that you keep in the slight mistakes it helps make it feel very real. Thanks again for all your work.

[@KeithCooper]

Thanks - I think it helps show some of the things you need to take care with.

[@richardterrell5309]

This ET-8550 printer is amazing when you consider its capacity for a.multiple of tasks and media it can then print, but what inspires thought is not only your demonstration, but your advise from own experience; as an instruction manual good as it is set out, just cannot portray the hidden variables encountered when n use. Thank you, you have increased my understanding for a time that understanding could be of value.

[@KeithCooper]

Thanks - Glad it was of use.

[@bouldernorth]

Thank you very much for this helpful video! Happy to have found your channel!

[@KeithCooper]

Glad it's of help for you.

[@bobberry9134]

Keith, Thanks for your brillant videos. Bought a Epson ET-8550 to replace a dead R2880 after reseach and your videos - no regrets. Now just printed on poster board with the guidance of your video. All pretty smooth and worked perfectly from Epson Print Layout ! Thanks again.

[@KeithCooper]

Glad it all helped!

[@bobberry9134]

Although I managed to get one print through on poster board, it now refuses. Epson are current saying their posterboard is too heavy for the printer and is not supported ! I wondered if this is your understanding, and if so maybe the video should reflect this ?

[@KeithCooper]

@@bobberry9134 Ah - it worked, and Epson gave me the board to use with it. I never get to interact with the Epson support people [aka script readers] just their more technical people. I ran off several prints - all fine. I don't have the printer here any more though to test. However I do remember that the rear feed mechanism needed a bit of tweaking of the guide slots after you'd fixed it See the note about this in the actual review www.northlight-images.co.uk/epson-et-8550-printer-review/ Unfortunately videos are set in stone once published - I can update/refine/edit the written stuff...

[@bobberry9134]

Finally got there - it takes it with gentle coaxing a number of times on the paper feed. I guess technical people 1 script readers 0

[@KeithCooper]

@@bobberry9134 If it had not been Epson's printer, I'd have modified the edges of the rear guide slot to make the board easier to use [with a craft knife ;-) ]

[@sharons4700]

Thanks!

[@KeithCooper]

Thanks!

[@lalawuhan6293]

Thank you so much Keith, you really helped me with choosing a printer. I bought this months ago and I love the quality, it has made better prints than some professional places!

[@KeithCooper]

Excellent - Glad I could help

[@iansteele5300]

Excellent review , clear, concise and very informative . I am considering upgrading from my old XP605 to the 8550 for a number of reasons . The XP605 has served me very well, happy snappies from holidays and CD/DVD printing etc and has always turned out pretty good, well for me as an amateur :) Now I am thinking of the 8550 to do larger prints of Highland landscapes and of our grand daughter. This video has helped me no end with the information on rear feeding :) Now to find the best price :) Great videos Keith , keep up the good, very good work mate :)

[@KeithCooper]

Thanks - do check the main [written] review as well, if you've not seen it, for more details: www.northlight-images.co.uk/epson-et-8550-printer-review/

[@GeraldPierce-ep3zw]

Thank you so much for the video. I have been trying to figure out how to do exactly what you showed. Got lots of good tips.

[@KeithCooper]

Glad it was helpful!

[@chrisgreg1972]

Really enjoy your videos, thank you for sharing your precious experience.

[@KeithCooper]

Thank you!

[@goomba478]

Just ordered one today (even though it says it will be about 6 weeks before I get it) and I'm very excited now. I didn't realize it could print on boards :). Thanks for taking the time to carefully explain everything so well.

[@KeithCooper]

Thanks - If you want to see all my 8550 related stuff start from: www.northlight-images.co.uk/epson-et-8550-printer-review/

[@Sizajasel]

Thank you so much for the knowledge! I was wanting to print on board with my 8550! I've subscribed to your channel!

[@KeithCooper]

Thanks - glad it's of interest

[@RAS-pz3st]

Brilliant video, really helpful. I have just printed my first A3+ print on Epsom semi lustre paper. It was amazing. Feeling of great satisfaction. Lightroom cc semi gloss setting. Without profile; printer manager setting. It is a bit above my comfort zone to try profiling! But the colours nearly matched! Thanks for ALL your videos!

[@KeithCooper]

Thanks - If you've not seen them, do check the written articles too, since they are where my more detailed info always goes... www.northlight-images.co.uk/photography-articles-and-reviews/printing-paper-reviews-articles/

[@KeithCooper]

Oh, and if you do want to try profiles, note the papers I list in the main review - those profiles are available for non commercial use...

[@RAS-pz3st]

@@KeithCooper thanks you very much.

[@glowatyourownpace]

I would love to see how it prints on 120 pound card stock! How it loads it (can it load it in the trays or does it have to go through the back as well?). I print greeting cards currently on an Epson ET-2760 and I have to manually "push" each piece of card stock in the back feeder, so it makes it a very slow process. Would love to be able to load like 25 pieces at a time and leave it to print! Thanks for this!

[@KeithCooper]

What is 120lb stock? Only the US uses this measure ;-) It depends on the thickness and stiffness of the media - you certainly can't use the internal feed tray - that's for copier paper and thin photo paper (just) You can stack a few art papers at the back (350gsm works fine) but not 25 sheets

[@glowatyourownpace]

@@KeithCooper Thank you for replying! Sorry, crazy American here! The paper says 325gsm if that helps (sorry, I am an amateur when it comes to all this). I understand I couldn't do like 25 at a time, but just to be able to do maybe 5 at a time and not have to "push" each one in would allow me not to have to babysit each one! I watched another one of your videos and saw that there is actual greeting card paper! I had no idea! I'm looking into that now and would love if you could recommend one that works well with he ET8500. My cards are a little smaller than A6. I basically fit two cards per one sheet of 8.5x11 paper. Thanks again! :)

[@KeithCooper]

325gsm seems to feed OK. The pre-creased cards I test with are on inkjet media and from companies here in the UK - I can't see why photo paper suppliers in the US wouldn't do them and at US sizes? The 8550 I have here seems to handle several sheets quite well, but it's something to check with any new printer. The specifications suggest it should work OK.

[@antonyscott4885]

No worries, I finally figured it out. On a Mac, the rear feeder is 'Manual' print.

[@KeithCooper]

Glad you figured it out!

[@kimbradford]

Thank you Keith. Love your videos on this printer. I'm not going to buy until I've read your full review. It's a pretty pricey printer for my budget. I'm kind of shocked at how well it did on that poster board. Very interesting.

[@KeithCooper]

Thanks - still on course for later this week...

[@Zefukey]

Thanks Keith, I couldn't figure it out from the animations.

[@KeithCooper]

Glad it helped

[@grainnekelly6149]

Super video. Very helpful and very clear.

[@KeithCooper]

Glad it was helpful!

[@Audsugg]

Your videos are very detailed and helpful. I really thought this would be the printer I needed - your vids do focus a lot on the issues. No point in glossing over them, best to be informed, I’m just left wondering if it is a good printer after all the issues mentioned

[@KeithCooper]

Thanks As ever, the videos are supplements to the main [written] reviews, but intended to give a realistic view of what the printer is good at. The rear board feeding is a nice option, but not made for regular heavy use Some aspects of my videos are indeed there to point out issues for people who perhaps wish for rather more than you actually get - especially using consumer grade printers for potential business use. It's an excellent printer for what it does... www.northlight-images.co.uk/epson-et-8550-printer-review/

[@6bish1]

Thank you! So very helpful!

[@KeithCooper]

Thanks

[@jer3006]

Thank you for your printer videos. One important tip for me was that quality papers can have flakes or paper dust particles that might not be noticed and should be brushed off before printing. Is a pressurized air can for dust removal acceptable as an alternative? I'm trying to decide the worse of two evils: Scratching the paper with the particles being removed as you brush them off vs propelling chemicals from a can on your expensive paper. What is your experience?

[@KeithCooper]

I use a feather duster for papers prone to flaking - that said it has to be a very special paper for me to put up with the problem ;-)

[@roslynclaytor6768]

Thank you for the very concise and clear video! Now, that I have removed the rear cover and installed the paper feed unit. Should I place the paper feed unit back on the rear cover and place the rear cover back on the printer? Can I leave the rear cover off of the printer?

[@KeithCooper]

I think I left it off - too much trouble to re-attach it ;-)

[@roslynclaytor6768]

Thank you for your reply!

[@karenh8536]

Thank you!

[@KeithCooper]

Thanks!

[@Endureromex]

Thank you very much indeed. Mine is a L8180 but it looks identical to yours, maybe in Mexico has another name. Were it not for your video I could have never been able to use the rear feeder. I pain in the neck I must say and very difficult to print in black and white, too much contrast and it shows strips, but I'll keep on trying. Thanks again

[@KeithCooper]

Glad to help - yes numbers vary. That rear feed is not easy to use!

[@rszanti]

Keith, I've been watching your vids since recently buying a ET-8550. They've been extremely helpful. One process I'd like to try is printing on a sheet of balsa wood, 3 or 4 inches wide and 1/6" or 1/32" thick and I'm wondering if you've tried something similar other than poster board ? Keep up the great work.

[@KeithCooper]

Thanks - the limitation (in the specs) is thickness. That and you'll likely need an ink receptor coating (something like ink-aid). It's actually Epson's printer, so no, I've not tried feeding wood through it ;-)

[@eskilvreb861]

Hi and Thank you very much for a lot great tips and tricks with the et8850. Just ordered one today. Do you use anything to keep dust away? Like a box or blanket on it? Or does it just stay at the desk?

[@KeithCooper]

I normally leave a cloth over printers I'm not using much - that and an occasional blow from a hair drier [on cold!] - my wife did suggest the leaf blower, but I'm thinking she was not entirely serious ;-) :-)

Great video! Is it possible for this printer to print directly onto a linoleum plate? That would be absolutely excellent for transferring digital prints to linocut.

[@KeithCooper]

I don't know this at all I'm afraid - it does depend to some extent on the thickness, but also ink adhesion/drying

[@bertbritza9598]

G'day Keith, after printing your sheet of board, did you remove the grey plastic guide and put it back into the duplex thing?

[@KeithCooper]

Yes, it snaps into place, and seemed like the sort of thing I'd likely mislay easily if not used a lot ;-)

[@martingagne3218]

Thank you Keith for this great video. If i may ask your opinion on this....I am having a little problem with printing on 13 x 19 Epson Cold Press Bright - Textured Matte Professionnal paper with my new ET-8550. This paper is 21 mil and it does feed with the top feeder (i was watching your other video with special fine art papers). The problem i have is since this is textured paper, i can see that the rollers are making a slight groove all across the print! Do you think that feeding it from the back or selecting another paper type (card stock) might solve this problem. I also have a R2000 which did not give me this problem since it support this thickness out of the box. I normally use the R2000 for this but it's clogged and i am having trouble cleaning the heads. Bought the ET-8550 to help out in the meantime...

[@KeithCooper]

I've not seen this, but the rear feed may help.

[@shanedean7372]

Keith, nice video and very good to watch. I'm after a printer that can print 300gsm, what the best epson printer for this?

[@KeithCooper]

Best? - my choice is still the 64" P20000... ;-) There is no such thing of course, just what fits your budget and needs Any of the 13" and above will handle 300 gsm

[@collectivevids5188]

@@KeithCooper im getting into a mini business printing: business cards, flyers, greeting cards, photo copies, etc. Do you think this printer would suffice / handle the work flow? This printer seems to have professional print quality and handles a range of card stock.

[@KeithCooper]

@@collectivevids5188 It depends entirely on the type of media - card not produced for inkjet use can look awful See the main [written] review, which has links to al my 8550 articles and videos www.northlight-images.co.uk/epson-et-8550-printer-review/

[@billyyoung234]

Yet another useful Tutorial Keith, Thank You. Have you considered a Tutorial on any Paper Jams that "May" Occur with the ET8550 ? That's assuming you have encountered this problem !

[@KeithCooper]

No - no jams whatsoever. Not quite true, I did mention in the review about the duplex process only working on very thin paper. The two paper trays are for my mind for copier paper only. Putting decent photo paper in them is just asking for trouble ;-)

[@docinfo6939]

Hello, you'r video helped me alot. Still i have the problem now, that my printing get's oblique because the paper in the rear feed has a little space to move(Because of the blue alignment clips/and the whole thing). Is there any trick to have the print straight on my paper within the rear feed?

[@KeithCooper]

I don't know - I only tested this briefly when I had the 8550 here, just to show that the board would work. A modification to the guides might be in order.

[@dunnymonster]

This little Epson ET-8550 really does seem very versatile. If my Canon Pro 100S ever dies I might very well look at this printer as a replacement 😊

[@KeithCooper]

Yes, very capable

[@jellyfishprintables]

Hi Keith, thank you for these videos. I need to print on 80lb cardstock from the rear tray- borderless. However, I only have this option from the printing menu for the other feeding slots. Cardstock does not work from the other slots, only from the rear. Please help. Any suggestions?

[@KeithCooper]

Thanks! First up, you don't need to use the cardstock media setting - the problem printing such light card is that it is rarely a media coated for inkjet use - I've had a steady stream of people asking about printing 'basic' card, and it rarely works well in _any_ printer of the sort I test. I assume you're also not using ICC profiles, so you can pick any media setting. If you use the VFA setting, it includes the pigment black in the mix and _may_ give better results on some media. The biggest problem in card printing is always the media, not the printer. Any media supplied with a weight in 'pounds' doesn't bode well in my experience - check with suppliers to see if it is coated for aqueous inkjet printing.

[@BillBane123]

Keith, You are a gem I have just found. In anticipation of your full review, can you address the question of if this printer would be worthwhile to consider in addition to a P800 (which I have), p600, p700, p900? The 8558's one certain added feature is double sided printing, which you have seemingly trashed? I will be printing numerous short run, largish, double sided, multi-sheet, folded pamphlets (mostly images) soon, and double sided printing could simplify and speed things up. (Affinity Publisher PDF -- to a RIP if p800) Thanks for your excellent work, analysis, and exposition. Bill

[@KeithCooper]

If I was printing on paper of any quality, then DS would be a manual operation. It might be OK for very light cheap paper, but it's very much part of the 'consumer' end features on the 8550 (think office printing)

[@jascha71]

Hi Keith, Thanks for this very clear explanation. Could you tell me where to find the icc profile you are using to print on the EPSON Enhanced Matte Poster Board? I can't seem to find a profile specifically for this board. Thanks in advance.

[@KeithCooper]

I believe it was the normal Epson matte one installed with the printer? I didn't specifically make a profile for this one.

[@jascha71]

@@KeithCooper Wow, thanks for the quick reply. In your video it appears you are using a profile titled: “8550 PinMat230 VFA hq.icc”. That doesn’t come with the printer and I can’t find it online. Any thoughts?

[@KeithCooper]

Ah yes, a while ago, it's one of the ones I created for the review - available on direct request See www.northlight-images.co.uk/epson-et-8550-printer-review/

[@stevepartos2362]

Thanks for the video. Recently purchased the ET-8550. If I use 300GSM + paper such as 350gsm I have two clear roller marks on the paper where it is fed through. I checked the settings and have ' thick paper' enabled in the settings but it made no difference? Is this a known issue as I was quite surprised. Additionally if I try and feed A4 through the rear slot due to the small paper feeder it's completely inaccurate on the feeding and skews by between 5-10% on the paper, even if holding - make the rear unusable for borderless a4 printing. Kevin, have you seen this at all or do I have a faulty printer? Thank you so much. Steve

[@KeithCooper]

Who Kevin? ;-) :-) I didn't see this with the one I tested, but I only tested large papers via the rear slot. Borderless can be problematic on many printers - it was OK on this one via the top. Unfortunately the printer I had went back to Epson - my suggestion would be to tell them that there is a problem [needs to be with an Epson paper, so as not to give them an easy get-out]

[@stevepartos2362]

@@KeithCooper I can't believe I said Kevin! So sorry Keith! Thank you for your fast reply and letting me know. I'll continue to investigate and see the options. Once again thank you!

[@KeithCooper]

Ha - it happens :-) :-)

[@anmic3590]

@@stevepartos2362I have the same issue. But maybe I want more than it can offer. More precisely to print on fine art paper, like hahnemuhle photo rag 308. On top I got two very fine lines on each side. Barely noticeable on some prints, but I know they are there. Through the rear slot, the paper goes a little bit off. Probabyl I can fix this when framing. But no solution so far. I will experiment with VFA and maybe Canson.

[@nunulka21]

Hi I have the same problem, the rear slot skews the print on A4 paper. Did you find solution? I wanted to print double sided for making bookmarks (then cut it at cricut), unfortunately I cant reach it exactly as it handles the paper inaccurately.

[@megoart3971]

good Video . Is it possible to print on canvas for printing copies of art paintings?

[@KeithCooper]

Yes, you can print on canvas. Just how much it matches originals will depend on your images capture, editing and colour management skills. See: www.northlight-images.co.uk/epson-et-8550-printer-review/

[@AndriaMrs]

I would like to print on A3 poster board, some pictures like characters I have made etc, with a bit of a story on and my Great Grandchildren's names on for them to hang in their bedrooms. What would you recommend ??

[@KeithCooper]

Far cheaper to print on ordinary paper and stick it to board. Printable poster board is neither common or cheap. Of course, board will print in the 8550 if you get the right sort.

[@AndriaMrs]

Thank you so so much Keith. I will try it that way. @@KeithCooper

[@piotrkuleszaWien]

I use epson photo +. when I select rear feeder the printer either lets the paper through and spits it out the front saying the feeder is empty. I can't print anything from the back.

[@KeithCooper]

Not software I'd normally use I'm afraid. EPL is far more capable IMHO - it's what I use for much of the testing and examples. See the actual written review for more: www.northlight-images.co.uk/epson-et-8550-printer-review/

[@SteveBrown-f7w]

Where can one find the Epson poster board product, 13x19 in. I'm in Chicago with a new 8550 printer that your video is using. I tried some older Ilford Gallerie Pearl Media Board 11x14 in. It did not want to print. Seemed to have difficulty drawing it into the printer rear feed. Seems the Epson version you use works? The Ilford product printed fine in my prior Stylus Photo 2200.

[@KeithCooper]

The board I'm testing came from Epson UK - so it's an Epson branded product. Don't know about what's available overseas I'm afraid.

[@SteveBrown-f7w]

@@KeithCooper Thank you.

[@primelowdiaz9836]

Hi, can you link me please the specific board that you use?

[@KeithCooper]

It's an Epson product - see your local Epson site - mine was from Epson UK

[@DodoKresse]

Hi, Keith! Thank you for your video. I like it. I have bought the same printer and want to print on thick papier. Enhanced Matte Posterboard. I use a MacBook pro with Mojave. But the Printer-driver have no possibility to use "manual feed". I can only choose 3 paper-feeds, not 4. do you know a solution?? (Sorry for my baaad englisch!! I come from Vienna.. ;-)

[@KeithCooper]

I believe the feed is visible when the duplexer is removed and selecting the media type? Did you check the actual review www.northlight-images.co.uk/epson-et-8550-printer-review/

[@doen.8724]

Awesome video, Keith. Thank you. Just got my 8550 and I had a blond moment with that rear feeder slot... The hieroglyphs on the back of the machine are not super helpful... The 13 x19 Eson Matte board does not seem to be available anymore? At least not in the States. Would you have a recommendation for another brand, of that size? Not that you have to know that, just wondering. Thank you again!

[@KeithCooper]

Thanks Sorry - I've no idea what products are available in non-UK markets - the board I have (A3+ and A2) was from Epson UK. I'd suggest asking a few of the larger suppliers and seeing what they've got?

[@brennakohlhase4194]

Hi Keith, love your info…have you tried 150 lb or 300 lb watercolor paper in this printer?

[@KeithCooper]

Maybe? - "150 lb or 300 lb" has no real meaning outside of the US :-) See the main [written] review for all the papers I tested www.northlight-images.co.uk/epson-et-8550-printer-review/

[@brennakohlhase4194]

Maybe a better question is have you tried textured watercolor paper and what setting is best for rougher textures?

[@KeithCooper]

@@brennakohlhase4194 Heavy art paper - as long as the paper is a type coated for inkjet use.

[@Richardincancale]

Hi Keith - I just checked the Epson web shop for matte poster board - they have an 850g A3+ product - is that what you used? The compatibility list doesn’t include the ET8550 though? Is that the product you tried?

[@KeithCooper]

It's an Epson [UK] one I used - the only one I've ever seen them list. They do change names of stuff sometimes though. Ignore compatibility lists - they are at best incomplete - no-one ever updates them. ;-) It's always thickness which counts not gsm.

[@Richardincancale]

@@KeithCooper Thanks!

[@xlpepon]

Hi keith! I have known your videos this week, i have just purchased a 8550 to Print mostly 300gsm A3, A4 and a5 papers. In this vídeo you say it would be better to get another orinter for that purpose. Could you tell me which, please? I still can send back my new 8550. Thanks a lot!!!

[@KeithCooper]

No - I do not say that ;-) It prints many papers like that just fine, but _some_ have noticed marking [roller marks] on some softer art papers See the main [written] review for more detailed info www.northlight-images.co.uk/epson-et-8550-printer-review/ The 8550 is an excellent printer

[@xlpepon]

@@KeithCooper Thanks a lot, Keith.

[@harrypardo4282]

Muchas gracias desde Chile

[@KeithCooper]

Thanks...

[@mikaleppaaho]

Thank you for your excellent videos! I've learned a lot from you. This was interesting since I've been hesitant to test Epsons Enhanced matte because Epson says it's for pigment inks (though not clearly saying it won't work with dye inks, I'm remembering couple of retailers actually does say that) but it seems to be working fine with ET-8550 that I recently purchased. Epsons Archival matte is I guess a completely different thing and for pigment inks if I'm understood correctly. One thing I've not fully understood is what are the things profile determines and what does the media type selection do. As you said the same profile gives different results on same paper if you select different media type in the options. I kinda thought the profile overrides all the information needed except print size. Does it matter what you select on the printer itself as a media type if you use Epson Print Layout and select media there. Often forgot to change it in the printer but not yet noticed any problems. Can you tell how does the built in Epson matte profile work with this or is it necessary to get custom profile for this. Well, I might anyway purchase it from you if I end up ordering some this board. Lastly, what do you think, is that board thick enough to hang by itself, I'm considering this as a budget exhibition media without framing/matting.

[@KeithCooper]

Glad it's been of help - media settings and profiles are two different things. The 8550 is unusual in having a hybrid ink set - The Epson set-up does install some Epson profiles and the driver can over-ride printer settings. Have a read of the actual 8550 review where I discuss this in more detail www.northlight-images.co.uk/epson-et-8550-printer-review/ It also has links to all of my 8550 articles/videos The videos are generally produced to supplement my actual (written reviews) not replace them ;-) BTW the board can bend in humid conditions and the corners damage easily Just beware that 'budget' exhibition media can, without care in use set the tone for the images too ;-)

[@mikaleppaaho]

@@KeithCooper Thank you for the answer!

[@AndriaMrs]

Hi Keith I have tried to find the A3 poster board but Epson dont appear to have it. Where do you buy it from please??

[@KeithCooper]

Epson UK

[@theresaleblanc7069]

I'm having trouble printing through the top any tips appreciated!

[@KeithCooper]

Have you read the main [written] review? - it has lots more info than the videos www.northlight-images.co.uk/epson-et-8550-printer-review/

[@amandaclemett711]

Hello Keith I have just bought the ET8550 and hoping to print A6, A5, A4 + . The card weight I print on is 300 or 400gsm, hopefully heavier in future which is why I have bought this printer. I cannot find out how to print an A6 "CARD" in either the top rear feeder or bottom feeder. Is there a size limit for the bottom back feeder? I cannot even find a card setting for top feeder without it telling me to switch to the bottom feeder, but no option for small size card. Thank you

[@KeithCooper]

You may need to create custom sizes - I don't recall from the specs, what the limits are. See the main [written] review though - there is much more in the written reviews than I can ever fit in a video www.northlight-images.co.uk/epson-et-8550-printer-review/ Note the enforced trailing margin on the rear feed - there are no borderless options either IIRC

[@melanielukic9203]

Hi Keith. I've just got my new 8500 set up. I use a Mac with Monterrey. I want to print a single sheet of card stock in the rear slot. I absolutely cannot find anywhere how to select this slot. If I remove all of the paper from the main tray, I just get a 'load paper" message for that tray.

[@KeithCooper]

Have a look at the main [written] review www.northlight-images.co.uk/epson-et-8550-printer-review/ Check too that the media type selected actually works with that slot Also, make sure you are not using the airprint driver [see the review]

[@melanielukic9203]

@@KeithCooper Thank you. I finally got it to work with one sheet of "design paper", doing everything from the control panel. On Photo+, I can choose the design paper, but still have no option to send to rear slot. Can I manually select the rear slot on the control panel before starting the print? (I'm using semi-heavy card stock.)

[@KeithCooper]

Can't say - Photo+ is not an app I'd ever use. I'd use EPL or print directly from Photoshop Settings should be specified in the printer driver I don't have the printer here any more to test.

[@melanielukic9203]

@@KeithCooper Well I finally found what I was looking for - there is ONE sentence in the user manual. "To select the rear feed slot as the paper source, select the option for the compatible paper size in the Paper Size setting". I always use 8.5 x 11, so that's the paper I selected. I did not realize there is an arrow that opens more choices in this (and many other sizes), one of them being, "8.5 x 11 rear feed". That is definitely obscure!

[@melanielukic9203]

Here I am a year later and still struggle with finding the rear "slot" as paper source. Apparently there has been a firmware (or software) update, and the "slot" is now selected by choosing MANUAL FEED. (On a Mac). I think calling one "Rear Feed" and one "Rear Slot" was confusing - most people probably assume the rear feed IS the slot.

[@Kai-O-Ken]

I plan to print a large volume of 300-350gsm card stock at 5" x 7" (127mm x 178mm) size with nearly borderless prints, allowing for a maximum of 5mm for non-printed areas. Will purchasing the Epson EcoTank ET-8550 suit my printing needs?

[@KeithCooper]

Probably not - if you use the rear slot, there is a longer rear border. It is also is very dependent on using card meant for inkjet, that and you can't stack card on the input... What's a large volume'? something to get printed commercially unless you have a lot of spare time ;-)

[@Kai-O-Ken]

​@@KeithCooper Thanks so much for the insights, your videos are amazing! Could you possibly give me an estimate of the gap size on 5" x 7" (127mm x 178mm) 300-350gsm card stock when printed from the rear? This will help me adjust my designs if needed. Thanks! :)

[@KeithCooper]

A bigger problem is that 5x7 is not a supported size for the rear paper feed [only the top feed] There is a min 20mm trailing edge margin. This is not a printer for making lots of cards... See the actual review at www.northlight-images.co.uk/epson-et-8550-printer-review/

[@Kai-O-Ken]

Thank you for the valuable information. Looks like ill unfortunately have to look for a differnt printer, thankfully tho you saved me allot of money! Haha Which printer would you recommend for the specific type of prints I'll be doing?

[@KeithCooper]

None that I've ever tested I'm afraid. Remeber, my testing is mainly for photo/art printing. There are good reasons that commercially, such cards are normally printed on larger sheets and then cut to size

[@9musess521]

This printer is driving me crazy - I love your videos. My constant problem is that when I select a particular paper source the LCD display says that paper is out in a paper source I haven’t selected. For example, when I am trying to print from cassette 2 and have selected what I think is the correct paper source, LCD display tells me that there is no paper in cassette 1. Does anyone have any suggestions?

[@KeithCooper]

Check the media type and size. I can't check since the printer went back to Epson. I'd suggest asking on DPreview's print forum, www.dpreview.com/forums/1003 But... do give far more info [software, settings, system used, also exactly why you are using the particular feeds]

[@antonyscott4885]

Wow, I'm finding the Epsom rear feeder so frustrating. My card simply goes straight through without printing. Any thoughts?

[@KeithCooper]

Check the settings?

[@Amylynnp777]

Would the straight through be good for 100 and 110 lb cardstock as well

[@KeithCooper]

Sorry - that's a US only measurement - I don't know what it means

[@vanillarice24]

Hi Keith i actually bought an ET-8550 based off yours and other reviews. Its my first high end printer and I read moving it can mess up the calibration and nozzles. Is it ok to reposition sometimes without worrying about messing amything up?

[@KeithCooper]

Glad the info was of help! Whoever told you that knows nothing about the printer... ;-) I would happily put it in the back of my car to take it somewhere to show it. I'd make sure the head clamp lever is applied and leave it to stand for half an hour for the ink to settle before use. As to moving it round my house - just move it :-)

[@vanillarice24]

@@KeithCooper thank you brotha! I was seriously stressing out about that little point so you helped a ton more than you know 🙌. I'm already subbed so looking forward to more vids.

[@pb012756]

I just bought the ET 8550. I don't know why after feeding paper into the printer from the back, the paper comes out without printing? Do you know who I should contact for help?

[@KeithCooper]

All I can suggest is to check the width settings carefully and try printing via EPL There are some more examples in the actual review at www.northlight-images.co.uk/epson-et-8550-printer-review/

[@pb012756]

@@KeithCooper Thanks so much! Your response is so fast. I will try it, and will let you know if it work.

[@helicopter2293]

this printer is amazing 🤩

[@KeithCooper]

We agree!

[@Robertobinetti70]

Thanks

[@victoriarachael1]

Hi Keith, great video I’m experiencing the following problems : the display says “paper inserted too far” I’ve tried positioning in a number of different places. When it does feed it says paper jam even though the paper in not jammed. I would really appreciate your advice. Thank you 😊

[@KeithCooper]

Sorry, I don't have it here any more, so can't check. Have you tried waiting for it to ask you to feed. See also the instructions in the user guide, it's quite well written.

[@gjjspek]

Can i also add 30,5 x 30,5 cm in this Epson printer. This specific size is card stock related for scrapbooking. I hope you can advise?

[@KeithCooper]

yes, with the 8550 - as a custom media size (13" width max). Note that custom sizes do not allow borderless printing

[@gjjspek]

@@KeithCooper Thanks for feedback, card stock is 240 grams . So that shouldn't be a problem right? Did you try to print card stock and compare results with other printers?

[@KeithCooper]

Generally anything that gets called card stock is pretty useless unless made for inkjet use. This is so on every printer I've looked at - BUT remember I look at printers for photography, not office style printing...

[@megoart3971]

I have one last question, there is an extension of the warranty for an additional three years. for 180 euros. Do you recommend it? Would it be an extra protection important? . Did you buy it for yourself? Thank you for your patience

[@KeithCooper]

On an 8550 , no I probably wouldn't On a P5000 or P7500, yes I would. Depends on usage Remember, all the printers I test are not mine! They are loans of varying lengths - there is no way I could afford to actually buy all this stuff (see 20 years of reviews on the web site) yet alone be allowed to keep it here in the house!

[@megoart3971]

@@KeithCooper thank you sir

[@luludelafalaise902]

super thank you !!!

[@KeithCooper]

Thanks!

[@stans6582]

Thanks, Keith, Have printed on board with the -P900 IF SO HOW DID IT TURN OUT?

[@KeithCooper]

Yes ... see kzbin.info/www/bejne/jJOshX58ebOphbc And on the P700 kzbin.info/www/bejne/r5OQhKJ5pMmGabs

[@Kai-O-Ken]

Does the 8550 leave the gap from using the rear?

[@KeithCooper]

What do you mean, by 'leave the gap'? If you mean a margin, then yes

[@jrbboop]

Love this printer. The issue I’m having is printing on a photo paper cassock and it was showing the roller marks when I printed with the regular rear feeder. So I tried the slot feeder. The marks are a little less but are still there so surprised since it’s not even that thick. Any suggestions?

[@KeithCooper]

Sorry - I've not seen a fix for this when it happens What is a 'photo paper cassock'??

[@joycezavala3803]

@@KeithCooper Sorry I meant cardstock. Just a thicker paper in cardstock material but it’s glossy for photos. It’s showing the roller marks when I print

[@KeithCooper]

Ah, that's clearer - I was wondering about some special ecclesiastical photo printing... ;-) Some cards on some printers do seem more prone to marking - does it mark other papers? I've heard of people getting new printers replaced for just this... I didn't see it on the one I tested, but that's not here any more

[@joycezavala3803]

@@KeithCooper Thanks for the response. I was surprised it was doing this because I use the printer for magnet sheets and other papers but the is the first time in trying a glossy thick paper. Thanks again!

[@chuckgaudette8885]

Hello Keith, I'm just getting started with the ET-8550. I want to print 5x7 inch postcards. I'm using Red River card stock. The printer with take it from either tray number 1 or from the rear feed (top rear feed not the direct slot). If I use the top feed then about 50% of the prints show a blurry double image in the last inch or so of the print. As if the print jogged slightly at the end. Is there something I can do differently in feeding the paper to avoid this? thanks.

[@KeithCooper]

I've not seen this, it's sometimes caused by the stiffness of the card and output rollers not gripping well enough. Check also how the card is supported towards the end of the print. In general, the trays don't work well for anything but lighter papers. I've not got the printer here any more, so can't offer any more specific info...

[@chuckgaudette8885]

@@KeithCooper thank you Keith for your reply

[@ibreakstuff815]

I also own this printer and would like to print from the rear slot but on acrylic sheet stock. Do you know if that is possible? Can it handle a maximum thickness and would the shiny surface of the acrylic sheet cause print problems. I assume if it printed properly, sealing the surface after would be required.

[@KeithCooper]

Acrylic stock - not a chance with this ink set. Maybe if you use an ink receptor coating, but that will take some experimenting

[@ibreakstuff815]

@@KeithCooper And a coating would probably ruin the glossy surface of the acrylic I assume.

[@KeithCooper]

Absolutely. There may be other commercial inks/printers which work, but no inkjet printer I've ever tested will print on this medium. Contact a sign making company and see what they use?

[@ibreakstuff815]

@@KeithCooper They told me the best bet is UV cured inkjet. The ink cures as soon as the print head passes over by blasting it with UV light. The problem is the printers are far too expensive for hobbyists like me.

[@KeithCooper]

Yes, that's the sort of printer I was thinking of. I've looked at similar stuff when visiting Epson and Canon, but they are far too big to fit in my kitchen, for a review! ;-)

[@ABbne880]

Hi just got an ET8550 and note that the prints can be easily smeared. There was some dust on a test print i’d done the day before so I used my finger to remove it resulting in smearing the print. Normal finger contact does not appear to cause a smear, however I’m not confident prints are robust enough for submission into camera club competitions. Is there a way to protect the prints, such as a spray, that would not be detrimental to the print.

[@KeithCooper]

On what paper? Not a problem I experienced with any of the media in the review [the main written one, with a list of papers I profiled]

[@ABbne880]

@@KeithCooper Canson Infinity Platine Fibre Rag 310gsm. I was printing B&W, the colour print on this paper did not have this issue. Also printed B&W on Canson Infinity Baryta Potographique II Matt 310gsm which does not appear to have the same issue. I did I not follow your advice to use Epson papers as I could not source one of their sample packs. I used Canson as they did have a sample pack and also have supporting ICC files

[@KeithCooper]

What media setting for the Canson IPFR? With the 8550, issues such as this are almost media settings/paper related Remember, the key to good results with the 8550 is making use of the capabilities of the hybrid pigment/dye ink set - there are papers which don't do so well. This is discussed in the main [written] review at: www.northlight-images.co.uk/epson-et-8550-printer-review/

[@ABbne880]

@@KeithCooper Thanks for your prompt responses, certainly was not expecting such a great service. Just had a quick scan of the article, will spend more time and have a good read tomorrow.

[@SteveBoyer10]

Awesome thank you!

[@KeithCooper]

Thanks - glad you liked it.

[@kurotaka007]

I actually want to like this printer (great value and flexibility). But I’m having issues with my M1 Macs and Epson software. So what is your go to printer? Seems that Canon dies a better job keeping up with software updates??? Speculative on my part. Appreciate your thoughts? Thank you.

[@KeithCooper]

Can't say with respect to the M1 - one of those does not feature in our computer lineup for some time yet I suspect. Ask somewhere like the printer forum at DPReview - more likely to be someone using one with a new Mac?

[@artsygrl23]

I'm extremely frustrated by mine because for one, even though my paper is not thick, it will only work in this back feed and secondly no matter how I try to push the guides right up to the paper, it will at times feed in crooked and/or off center. I also can not get my image to print to the edges of paper so if the border is off center on my 11x14 image then I can't sell them because they don't fit in a standard 16x20 matt cut out for an 11x14 or straight into an 11x14 frame. This was supposed to save me money not cost me more hassle. Any thought son how to fix this or did I just get a defective unit?

[@KeithCooper]

The ability of the top feed for thicker media seems to vary. For the straight feed, I saw someone make a physical guide for rear feed at a particular paper size. 3D print and woodwork skills required...

[@mch2359]

How would you treat or laminate this board for outdoor use?

[@KeithCooper]

I wouldn't... ;-) It's paper based and the inks are not particularly lightfast in outdoor conditions. I suppose you could paint it with varnish, but that's not going to alter the lightfastness.

[@jonathanlewisphotography]

Hi Keith, great videos. I’ve tried printing from the rear feed like this with a 310 rag paper as I’m finding that when I print through the paper feeder its leaving a mark on the print about 2 inches from the top of the page. So I wanted to try this method but the problem I’m getting is that I’m feeding the paper in and it states ‘printing’ but then takes the paper straight through and states paper out in rear feeder. It’s A4 size but I can’t see where I’m going wrong, any ideas?

[@KeithCooper]

Ah, I only really tried the board with the rear slot. I'd suggest asking on the printer forum at dpreview.com - quite a few 8550 users there

[@jonathanlewisphotography]

@@KeithCooper ok thanks

[@laurenjwolf]

If anyone could help me with this printer and this particular problem I would be ever so grateful. This is the second ecotank ET-8550 I've had after sending the first one back as I thought it was faulty. I simply CANNOT get the rollers to pick up paper from casette 2. It says paper out/load paper. I've tried everything, pushing the paper in to the casette as far as it will go, just loading one peice, loading it with 25 etc. The feeder will just not pick up the paper (it's just basic A4 plain paper). Surely two printers cannot be faulty with exactly the same problem??

[@KeithCooper]

Sorry, but if this happened to me it would have to go back again - this is a pretty basic function to have issues with. Contact Epson

[@AndriaMrs]

Hi Keith, I have just bought the Et-8550 printer thinking it is easy to print A3 card. I want to make greeting cards etc but with at least 300gsm card and thicker if possible instead of just sticking thicker pieces on the front of my A5 or A6 card that I have printed a pic on. Mmmmm now I am having a re-think as I don't know if I would use the back much if it's difficult getting that poster board etc. I just thought you put the 300 + gsm card through that feeder at the rear feed. So would I only use the top feeder for A3 and also thicker card please? I have not put the inks in yet and not sure if change it for the ET-8500. What would you say?

[@KeithCooper]

I'd keep the 8550 - but I don't like small printers ;-) Have you read the actual [written] 8550 review? - it has links to all my related videos www.northlight-images.co.uk/epson-et-8550-printer-review/

[@AndriaMrs]

@@KeithCooper Thanks I will look now before I put the inks in 🥴

[@littleivory3544]

Hi - how did you get on printing on the 300gsm+ card with the 8550?

[@AndriaMrs]

Hi, well it was a lot easier than I thought. I use the top feeder (like a normal printer) but make sure you tell the printer A3 size. I only use 1 sheet at a time and it has up to now worked fine. I buy (if you are in UK) the A3 card from Hobbycraft or The Range, not expensive. I would like to try the Poster Board at the back slot feeder but am toooooo frightened lol. @@littleivory3544

[@AndriaMrs]

Hi Keith, 1 year later (lot going on last year for me 😞). but now just watched this video on Printing on Poster Board. Well I must say as always you are very good at showing and explaining, so I am off to find some A3 Poster Board now, thank you so much for all your reviews. XX

[@eddyhaze8239]

I am getting roller marks on both my photo paper will this fix my problem ? or do you know any other tricks to fix my problem ?

[@KeithCooper]

It has for some people - however I only had the printer here for the review, so I've not tested it at all

[@eddyhaze8239]

@@KeithCooper okay thanks

[@littleivory3544]

Hi - did you ever solve your roller mark problem? Having the same issue here!

[@eddyhaze8239]

@@littleivory3544 changed paper all seems good now

[@eddyhaze8239]

@@littleivory3544 some paper will cause roller marks and some will have no problem

[@CathyPoronsky]

Have you ever used this printer to write on envelopes???

[@KeithCooper]

No. It's supposed to though. The printer settings include sizes for envelopes

[@owntor1]

Hi, I tried to get my ET8550 to print on 13"x60" piece of paper, but it's not recognizing the paper in the rear feed at that scale. It does find normal letter size paper when I put it in the rear feeder. I've played with the page size and margin settings with no luck. Any tips?

[@owntor1]

FWIW it does print at 47.25" in length.

[@KeithCooper]

Have you set a custom page size via the front panel? I've found this long page stuff seems to vary with drivers and the precise way it's set. Also if I remember correctly, it needed a page size of slightly less than 13" - 12.97 or the like? I don't have it here to experiment any more I'm afraid though. I'd usually suggest asking on the DPReview printing forum - just be sure to include software/system details

[@owntor1]

@@KeithCooper You have a good memory. I did set the page size on the panel. The max width it allows for user defined size is 12.95". I'll check with the forum you suggested. Thanks for the help. Happy Holidays!

[@justins21482]

near impossible to find that poster board today. in fact I can only find 24"x36" not even a3+

[@KeithCooper]

Here's the one I used listed at Epson www.epson.co.uk/en_GB/products/ink-and-paper/paper-and-media/enhanced-matte-posterboard%2C-din-a3%2B%2C-800g-m2%2C-20-sheets/p/2027

[@michaelk946]

I am trying to decide between the pro100 or the 8550. Any thoughts ?

[@KeithCooper]

Pro-100? Given I reviewed it in 2014, it can't be a new one? See my review www.northlight-images.co.uk/canon-pixma-pro-100-printer-review/ No contest whatsoever - 8550 wins hands down...

[@michaelk946]

@@KeithCooper I’m sorry. It was a typo. I was interested in the pro 1000. Sorry !

[@KeithCooper]

17" pigment vs 13" pigment/dye once again, no comparison, pro-1000 this time ;-)

[@interlogicpublishers]

Hi Keith. Its me again from Belize. Do you know a resource that I can use to figure out how to print multiple greeting cards back and front using the Epson 8550. Im a bit brain dead so im having troubles figuring out how to orient the cards and print the font and back by priting one side of the 12 x 12 first then turning the whole paper.

[@KeithCooper]

I got confused by this once - a trick I was told was to practice on plain paper, draw the layout you want on both sides - then use this as a guide to image layout and feeding the sheet.

[@interlogicpublishers]

@@KeithCooper yea I guess it’s trial an error. I’ll hire a young person here to figure it out. I aim to use just Microsoft word

[@wolft2953]

Would u recommend this over the canon pixma pro 200? I print stickers and small art prints as well. I also print photos but they're not for professional use only personal :)

[@KeithCooper]

Ah, I never make recommendations I'm afraid... Have a look at the full review when published and the PRO-200 one (written ones, not the videos!) and see the features. The size of the ink carts will make the 8550 cheaper to run eventually ...if... you print enough. I know absolutely nothing about stickers I'm afraid, so I've no idea which might be better - For me, stickers are for labelling jars of pickle and fruit... :-)

[@wolft2953]

@@KeithCooper Haha! Thanks, Keith! I was heavily considering the price of ink. I print a lot some weeks, and i don't print at all some. So who knows. I will heed your advice and look for written reviews as well! Thank you

[@tajuana_on_a_mission]

Is this a foam board? Have you tried canvas boards

[@KeithCooper]

It's not foam, it's printable card about 1.6mm thick IIRC I've not seen canvas board - it would need to be a product meant for inkjet use though.

[@russell7489]

Brilliant

[@KeithCooper]

Thanks

[@kurotaka007]

Are you printing from OS or Windows? If IS what version? Reason, I’m having issues with Epson software in M1.

[@KeithCooper]

Mac 10.14 - No M1's here I'm afraid until I start getting paying work again

[@mohammedmakda9306]

Hi Keith, What thickness board did you use ? regards

[@KeithCooper]

It's standard Epson matte posterboard - www.epson.co.uk/viewcon/corporatesite/products/consumables/overview/paper/gfap/empb

[@mohammedmakda9306]

@@KeithCooper Thank you so much just been on the link, it looks like 1200 micrometre, which is 1.2mm i think

[@KeithCooper]

yes it is 1.2mm

[@ALIRAQI_AHMAD]

After 3 years.. Is that printer good?

[@KeithCooper]

People tell me so... I don't have one myself - most printers I test are loans I cannot afford to buy printers just for review - just as important, I'm not allowed to live in a printer warehouse ;-)

[@UnofficialFanVids]

Anyone know where to find the matte board he is using?

[@KeithCooper]

He is using Epson matte poster board - from Epson ;-) Note that not all sizes are stocked by all regional outposts of Epson - you will need to check whatever country you are in - mine came from Epson UK

[@LOTUSARTSTUDIO-gx8yf]

I recently buy this printer, and i am very upset to paper feed. Every time my paper crooked not straight, When i upload in rear feeder or heavy paper in bypass rear feeder slot. 😕 i am very upset. I dont know how i put paper straight in paper feeder ☹

[@KeithCooper]

If it's a new printer and has feed problems, I would contact Epson. It what I did when one with problems turned up to review - a new printer should work...

[@donniejang1138]

What is the posterboard called or part number i cant find it

[@KeithCooper]

It's Epson poster board Check you local Epson web site to see if they stock it =- I'm in the UK and got it from Epson. Not all regions seem to stock it

[@Hyacin75]

@@KeithCooper @donniejang1138 I came with the same question after watching this video to find out how the rear feed worked. I'm in Canada and can't seem to find 13x19 Epson Poster Board either 😞 ... awesome video though, thanks!!

[@truecruelty1]

how do i get it to print from the rear i cant get it to work

[@KeithCooper]

Sorry - you need to read the manual for whatever system you are using. I just opened up the back, fitted the guide rails and made the settings in the software - it worked. You need to select a media type that is supported via the rear feed However, that's on my Mac with the system I have - yours may be different, hence you'll need to read the manual

[@truecruelty1]

@@KeithCooper hi keith unfortunately i only received a manual regarding initial set up , i also did exactly as you opened up the back , fitted the guid rais and made the settings on the printer , it hasn't worked. as for media types how can i find out what media types are fed from the rear tray atm im using high gloss. regards

[@KeithCooper]

Do a search on "et-8550 manual" and you will find downloads for it. support.epson.net/publist/?model=ET-8550%20Series&lang=EN Not much more I can say, since the precise look of the settings is different on every system - it does work though