Here is what I've done to my Epson ET-8550 to convert it for dtf. leave any questions you have in the comments!
Пікірлер: 46
@tfokeefe9 ай бұрын
You really have talent and you're not afraid to tear things apart. When you get the time, it really would be nice if you let us know where you get the parts and pieces that you use to work on the 8550. I subscribed to your channel to see where you go in the future.
@Gameondad69 ай бұрын
Thanks! I will make a few videos of it torn down and whatnot. I have one now that is pretty much dead. So it's a great one to show examples
@tfokeefe9 ай бұрын
I'm trying to take my tanks out, but I'll be damned if I can figure out how it all comes apart. When you get time, you think you could show video of how to get those damn things out of there! ---LOL!
@lateckax197 ай бұрын
I think I might have to replace my 8550, I received the dreaded “paper jam” error with no paper jam, this is after having the printer for 6mos and regular maintenance. I want to buy another 8550 but want to use this CISS system….im on the fence about it
@Gameondad67 ай бұрын
You might try running a few sheets of white paper through the rear tray to see if it will take those. If it will, it might just be a matter of cleaning the rollers. If not, my opinion now is to order bulk transfers from a wholesale printer (us or someone local to you) and save until you can afford a printer built for DTF.
@iamliftedprints5117Ай бұрын
Delete program and reinstall
@ericvanstraaten29818 ай бұрын
Good day, thank you for your very insightful articles and videos. As you are by far the best informed expert I could find, I hope you can answer my question. I am planning to convert an Epson printer to be able to print on a powder distribution system (spreading thin layers of plaster on top of each other, the Epson prints an image on each layer), thus achieving a full colour 3D powder printer. In my view, the best way to do this is to leave the printer as untouched as possible, and only through hacking the the encoder make it ‘riding’ on two rails above the powder bed. My choice has fallen on the et-8550 to do this with. A system such as this is only possible if the area where the printers operates, can be completely exposed, so only the printhead moves above the powder bed. Because there are no good diy’s for dtg available, this is hard to determine is this is even possible with this model. Do you perhaps know the answer? Kind regards, Eric van Straaten
@cprocks22 ай бұрын
Hi, I have this same ciss and have it set up almost identical to the way that you do. No matter what I do, within a day or two of clearing them out, air bubbles appear in the ink tubes just after the tubes exit the ciss ink tank. I've even installed a one way valve in the tubing but that hasn't fixed it. Did you ever have this problem and if so, how did you fix it? Thanks.
@BigBigNRGY3 ай бұрын
Hi there...In one of your reply's to a comment you said "...save and buy a printer built for DTF"...now that you have been using a converted printer, is it your opinion that that would be the less headache but more expensive way you would do it if you had to do it all over? I converted an Epson WF7720 ($250) to sublimation and love it 3+ years however, DTF printer packages are around $1500-$1800 on the low end. Honest pro opinion would be worth hearing/reading. Thanks for all the info!
@Gameondad6Ай бұрын
I went through several 8550 printers that all failed due to various reasons. They just aren't meant for dtf. We did invest in a large format DTF printer. It was the best decision we made for our apparel business. Yes, you'll be $5-8k out of pocket minimum...but it's worth it
@alejandrafragoso762111 ай бұрын
Can you share the link to where you bought your ciis system please? 😊
@223ent11 ай бұрын
i need to know too
@SmilA89Ай бұрын
Hi I have very important question but no one else answer yet, u have a built pump on ciss system for white ink and a mixer( 1 hose for put in ink second hose for return circulation?), do u switch on your pump when u printing or before u printing and then off when printing ?? could u show your connection for return hose in the print head do u have a 2x Y connector or 4ways one connector ?, how strong u pun your pump to work its very slow,very fast or just to move constant flow ? I have 4 ways connector and when I starting my prints about 5 min before I switch on mixer and pump but I noticed that's my white ink when pump is on connector sucking different colours from print head and make it grey instead of white. maybe that's 4way connector causing suck. connector looks like ⬅⬆⬆➡ where on left arrow its in white ink,right arrow its out ink and arrows up its head conteiners for white ink. thank u
@Gameondad6Ай бұрын
I didn't use a circulation pump with my 8550. Both white lines just fed the printer. I also quit using the 8550 and I was never able to get more than 6-7 months out of a head. I've since purchased a real dtf printer.
@MsLC8210 ай бұрын
How did you prime your system? I can't get the ink to run through the tubes. We removed the tanks as well. TIA
@thefonze2510 ай бұрын
I actually have this same issue only the yellow started to come out and the other colors are not coming through ?? Can't find anything and this printer is brand new.
@MsLC829 ай бұрын
@@thefonze25 I was able to get the ink to run through by performing a power clean, unfortunately, the white did not come through. All other colors are visible when I do the nozzle check. I even tried on color paper to see if the white was working, but no luck.
@pixelbat4 ай бұрын
@@MsLC82 Did you ever figure it out?
@user-sh2wl8ro7z9 ай бұрын
Duuude. I want to do this to my printer. Can you assist me with a link to how I can put a external cis on and a waste tank please. Thanks
@Gameondad69 ай бұрын
Sure can. I'll try to post a video soon
@Thissimplelifecrazy10 ай бұрын
I didn't hear you mention anything about the roller. Did you remove the roller wheels? I get horrible streaks with the wheels.
@Gameondad610 ай бұрын
Yes, you'll remove the exit rollers
@thardy20023 ай бұрын
What is the cleaning solution diy you do? Thank you 😊
@Gameondad6Ай бұрын
Just a mixture of Windex and distilled water. Use a little rubbing alcohol if it's super clogged
@Friendofsinners7776 ай бұрын
One of my white tanks is not being pulled from. Do you think I have a clog? What do I need to do to fix it?
@Gameondad65 ай бұрын
There's a good chance you have a clog. I recommend flushing the line
@CarlosJ.Calderon5 ай бұрын
so i would like to know if you have your instruction for you CISS on the ET-8550. could you please share it with me?
@user-mi7xf8wv7f7 ай бұрын
Did you have problems with ink flow mine is dumping out. Like I have puddles on my prints. Any help is appreciated.
@Gameondad65 ай бұрын
My guess is, you need to clean it well. Your film could also be upside down
@pixelbat4 ай бұрын
I really want to get my 8550 set up like this. Every CISS w/ white stirrer I see on Aliexpress comes with dampers for like the L805/L1800/15000, and not couplers. Having a hard time finding couplers to connect the CISS. Did your kit come with the elbow style, or the straight barbed type?
@Gameondad64 ай бұрын
I can sell you one
@pixelbat4 ай бұрын
@@Gameondad6 thanks. But I built my own recently
@theresajohnson58045 ай бұрын
Which brand of ink do you use for 8550 and did u purchase it
@Gameondad65 ай бұрын
I was using ink from dtgpro . Now, I order ink in bulk (I also sell ink)
@lanuevareflexion6 ай бұрын
Amigo tengo una pregunta tengo el acrorip v10.7 y no me lo asepta la et8550
@Gameondad65 ай бұрын
I'm not sure. I was using it just fine with mine. You might check fb forums for help
@Oscar-vg5xe9 ай бұрын
Where i can buy the rip software for this DTF printer ?
@Gameondad69 ай бұрын
Dtgpro.com
@taylorardis52626 ай бұрын
Where can i buy ciss system do you have part#
@Gameondad65 ай бұрын
AliExpress
@JanieHarris3 ай бұрын
Can you provide a link, please, to the appropriate CISS on AliExpress for the ET-8550?
@anthonygrover833411 ай бұрын
Are you able to share the link to where you go the system from?
@Gameondad610 ай бұрын
Just through AliExpress
@_DarkestNATION10 ай бұрын
@gameoncornhole can you link it?
@ps4proplayer54410 ай бұрын
@gameoncornhole is it the xp 15000 kit?
@Gameondad610 ай бұрын
@@ps4proplayer544 let me find it. It was a pretty standard ciss with white mixing.