How to Convert Epson Ecotank Et-8550 to DTF (Direct to Film) Printer

This is the old method to convert.
Updated DTF conversion Video:
• Epson ET-8550 How to C...
ET-8550 CISS KIT
hangrymuscle.com/products/uni...
Here's how to convert your Epson Et-8550 to a DTF (direct to film) printer.
-Initial Installion
-Filling the Inks
-Removing Rollings
0:00 Intro
0:22 Unboxing
12:14 Turning on the printer
12:30 Printer Initialization
13:20 DTF Refillable ink bottles
19:00: Putting in DTF Ink
23:23: Printhead Nozzle Check
27:00 Removing Rollers
29:00 Test Print
Full Video for removing rollers:
• Removing Rollers on th...
SUPPLIES USED ARE FROM: dtgpro.com/?afl=3277
DTF Ink: dtgpro.com/cicproduct/dtf-pro...
DTF Film A3+ (13x19): dtgpro.com/cicproduct/dtg-pro...
DTF Powder: dtgpro.com/cicproduct/dtg-pro...
-------------------------------------------------------------------------- Website:
www.hangrymuscle.com
--------------------------------------------------------------------------
Follow me on Social Media:
/ hangrymuscle
instgram.com/ActionfigureZach
--------------------------------------------------------------------------
To donate to my coffee addiction ☕️:
CashApp $zachwill949
Venmo: HangryMuscle
Email: [e-mail]
FULL DISCLAIMER: I make a small commission on my affiliate links
#dtftransfers #howtoprintdtf #dtfprinter #epsonet8550
Coupon: Hangry for an extra %5 off

[@litlsuz]

I watched this shortly after you first posted it. After doing a lot of reseach, I'm back. I'm subscribing. Love your style, you are so calm. I came for the knowledge/experience you offer on the DTF. Much appreciated!

[@HangryMuscle]

Welcome back, glad to have you. Appreciate you watching, Thank you 🤗

[@codysmith4665]

Top 10 most under appreciated videos. My guy great video. You are to my knowledge the 1st to film this and I've been looking everywhere for this content. Keep it up man.

[@HangryMuscle]

I had the same idea, no one else is openly using it but its a fantastic printer to use, with very little maintenance 😊

[@imnared4784]

So do u have to have a extra little box where the extra ink go to or is it something else you were saying that you have to put a drain in

[@HangryMuscle]

@@imnared4784 No I didn't install the external waste tank on this. This printer doesn't require excessive cleanings so the maintenance box is not being filled up like other printers.

[@triciamackey6669]

I purchased this printer a little over three months ago and convertedit to sublimation. Now I'm seeing so many people converting them to dtf. I'm glad I came across your video. I might have to purchase another one for dtf. You've made the process look easy.

[@iamnucleus]

How reliable has it been for sublimation, has it clogged up 9n you and has it been hard to maintain, thanks

[@keesha8469]

@@iamnucleus i have a ep 2760 sublimation I barely use never clog

[@iamnucleus]

@@keesha8469 thanks for replying. I found a good deal on an epson r3000 going to convertto dtf, do you have any with these.

[@keesha8469]

@@iamnucleus i just bought a 8550 to convert to dtf but im still debating as it seems to be a lot of maintenance

[@keesha8469]

@@iamnucleus i wont buy another small print like my sublimation printer. Im going to buy another large format 24in and convert to sublimation to printer larger as well

[@JoseSalazar-lh3xl]

Yo bro thank you so much for everything Even the simple plug in the ink for sum reason everyone be hiding these things and you just talk about it without any hiding . Much love bro god bless you please keep up the work and the videos . I neeeeeed more . I love the way you are as a person to i can’t stress this enough sir. . GOD BLESS TOU

[@FourCornersCustomProducts-4CCP]

Awesome tutorial and great content

[@HangryMuscle]

Appreciate it , thank you! 😊

[@FourCornersCustomProducts-4CCP]

@@HangryMuscle Anytime 😊 Support Support Support Support 💙

[@HangryMuscle]

@@FourCornersCustomProducts-4CCP 🙏🙏🙏

[@AdamAdam-gd2tv]

Thank you was amazing video

[@HangryMuscle]

Appreciate that, thank you for watching #stayhangry 💪🏾

[@SweetArtsCustomCreations]

Great info thanks for this video. I'm looking into dtf to upgrade my personalized items business.😀

[@HangryMuscle]

DTF is perfect for that.

[@HangryMuscle]

No problem, appreciate you watching thank you 🙏

[@ibrahimosman7835]

You have absolutely NFi . Good luck 👍

[@HangryMuscle]

Why would I need luck, Been printing with it over a year now.

[@user-fn5iy1eh8d]

Happy this bloke is not playing with my printer🍉.

[@dakotawills5907]

So, i know white ink likes to crystalize after a couple days. Do you just run through it quickly or do you remove and shake it?

[@JORGINHODONASCIMENTO]

Great video! I have one myself that i converted into dy sublimation and the quality is amazing. My question is, how does the printer know that the second black is not black but white and how does it know that grey isn't grey but white? What settings do you use? How do you achieve that. Why do you have to remove the rollers? i am not sure i heard that explanation.

[@HangryMuscle]

You need a DTF rip program the color settings. kzbin.info/www/bejne/a2nYmqiPed9rbKM

[@da-tutor2916]

Roller is removed because it can cause jams or smears for this ink. The color assignment comes from a rip software that lets the printer know what is what.

[@LucyLu70]

Thanks for the video Why did you have to remove the rollers?

[@naturalhealthrevolution1518]

DTF...How fast can it print a 13x19 full color design?

[@shelbytate6298]

Which rip software is better? CADLINK or And the CADLINK or Acrorip for the Epson 8550. Also, cadlink software says desktop version next to it on the site but will it work on a laptop too or no?

[@sharonpinhasgdj3677]

Hello and thank you for the video! For this model et8550 do you need to connect a tank for waste white ink like on other epson printers like L1800, SC P600, XP15000?

[@HangryMuscle]

Hi you're welcome. You don't "need" to but having an external waste tank is more convenient than having to keep buying new maintenance boxes. All the color's ink waste go to the maintenance box/external waste tank,not just white.

[@izdiharaljabri5840]

Hi bro , i am facing problem with loading paper especially cassette 2 can you explain how to solve it

[@allthatglittersisglorias3414]

Wouldn't anything with grey turn it white instead or would it mix the black & white together to get a grey effect? Can you use get ink instead of white? Also, how would you switch the colors in the image to achieve the right effects?

[@HangryMuscle]

Hi, I'm not sure I understand your question. The printer uses CMYK to make the colors and the white ink is to print white layer behind the image so that when it goes on to a dark material the colors stay vibrant. The white layer also gives the print its durability. You can use an ICC profile, or photo editing software.

[@daygorock5494]

Can you use dtf ink after sublimation ink has ran out or has been removed from this printer?

[@andrescastaneda5362]

Hi, Thank you so much, great video. I have a question and I hope you or someone in the comment section can answer. I have an epson 8550 but I already filled all tanks with inkjet. Can I still use it to print transfers? If yes how do I empty the tanks and clean the lines in order to refill with DTF ink? Please help. Thanks!

[@HangryMuscle]

kzbin.info/www/bejne/h4SWnoKqnq2JlbM

[@andrescastaneda5362]

@@HangryMuscle thank you so much!

[@ShaSha-wh8my]

Thnks for the video. I’m going to try with the rollers in first, a bit nervous about removing them. Have you wash a garment with the DTF ink? The DTF hack with sublimation ink faded some.

[@HangryMuscle]

Its super easy to do. Yes it looks the exact same after washing. Some of my customers are stillwearing shirts I printed almost a year ago. Its not real DTF

[@kimberlymiller7885]

Hello! I have my 8850 and my ink. I'm ready to do my setup.. If I do not have the bottle to put the ink in (only the syringes), can I just insert the needle in either side of the appropriate color hole on the printer? And what vendor on Etsy did you get the empty bottles?

[@HangryMuscle]

Hi, Awesome. You can clean the ink bottles out that came with the printer. I don't think inserting with a needle will work. I'm looking for one, the tops from the previous seller did not fit.

[@marielab8774]

Can you add the links where did you get the new ink (to converted in Sublimination) tyia

[@HangryMuscle]

Hi, I only use the printer for DTF. Haven't tried sublimation. Here is where I purchase my DTF Ink. dtgpro.com/cicproduct/dtf-pro-eps-ink-1l.php?afl=3277

[@zacharywilliams6013]

🔥🔥🔥

[@HangryMuscle]

thanks

[@jimmieking7417]

😂 I’m here now after getting your info!

[@HangryMuscle]

@@jimmieking7417 awesome, hope it helps

[@secretofchakra9529]

Hey Buddy I love the content and very interested in this printer right now but I heard a lot of bad reviews once you convert it to dtf the white ink will clocked after a while so how is the maintenance on this and are you happy with the purchase right now ? Thank you so much

[@HangryMuscle]

Thanks bud, it all comes down to the individual and how you maintain the printer, alot of people are just getting into DTF and it's easy to mess up your printer if you don't know what you're doing. I've use other converted DTF The Et-8550 is my favorite printer, i get the best colors and I have the most experience with it. Any issue that comes up I can usually clear it right away.

[@elotromexican]

Any follow up on how it worked?

[@SaltLifeGeo]

Did you have to get a software ? If so how much was it ?

[@digstamps]

What is the best l1800 or l8180 printer head?

[@HangryMuscle]

I haven't used the L1800 so I'm not sure.

[@fame2394]

Hey bro wanted to ask hows the epson 8550 working for you for dtf?

[@Littlemismartha]

Why the external tank do I have to do that or can I use the tank that came with it

[@yourunclesam6780]

Tell us what RIP Software use after the convertion? Thanks in advance

[@silvia0palacios663]

I have an ecotank 8500, is brand new, is the same? Can I convert it too?

[@SladeGrovetv]

How are you getting the white to circulate? If you let it sit, it will cause problems with the printhead and you can't simply take the cartridge out and shake it.

[@HangryMuscle]

There's multiple ways, and yes you can take the Ink tank reservoirs out and shake them. Watch this video for more details: kzbin.info/www/bejne/mpjTgnyKfreLj80

[@patriciaalvarez9638]

You should come to Houston and fix mine

[@katrinapierce5638]

Does this same steps apply to the Epson ET Pro 16600?

[@dandee28]

with eco solvent and dtf inks, does it clog the heads? are the colors much more vibrant compared to the dyed ink or do you not really notice a difference?

[@HangryMuscle]

Any ink will eventually clog, eco & dtf ink clog much faster when the printer is not well maintained. I've only done DTF, everyone loves my colors on my prints.

[@foolheadd3305]

Is there software that a Little lower cadlink to high for me with 9 kids plz help me

[@clarissafrazier8004]

So did you end up going with EK print for this model, because I didn’t find that EK Print supports this model, I’ve already got the xp15000 and been doing great for few months, and emailed them and they don’t support it for software

[@HangryMuscle]

No I use Acrorip

[@litlsuz]

@@HangryMuscle Thanks! This is info I needed. Almost bought another one but think I'll find a printer first.

[@lilblack711]

What do you think is the best 3rd party sublimation ink for the et8550 because cosmos photo black and gray is sold out?

[@HangryMuscle]

Not sure, I only use DTF inks.

[@tiffanylee3901]

I heard there is no such thing as phot black ink and it’s the same

[@HangryMuscle]

@@tiffanylee3901 I've only used this for DTF printing and the Inks are different as well as some of the colors. CMYKWW.

[@melaniecross-king3819]

for the cosmos photo black i just used reg black and i did wait on grey and bought about 4 to ensure i had some

[@spunkybear1597]

What about having to use chip-less firmware as part of the conversion? Any videos about removing the pinwheels? What about rollers? What about waste tank when doing maintenance?

[@HangryMuscle]

Its a chipless printer. I have multiple videos on my channel about removing the rollers and installing a external maintenance tank.

[@spunkybear1597]

@@HangryMuscle Sweet!

[@spunkybear1597]

@@HangryMuscle Do you sell the external maintenance tanks? About how much are they?

[@HangryMuscle]

No I don't, but you can make your own. Here's the waste tank video. kzbin.info/www/bejne/oquyoqeMgKmWsLc

[@keshahinkle7532]

Probably a dumb question, but do you have to install the inkchip firmware for this printer like on the Epson XP15000?

[@laialexandreaco8467]

That's a great question I was wondering the same thing

[@TBruce1380]

I would love to do this but I guess I would be taking a chance and breaking a $700 printer.... So I take the roller out & use the DTF rip software to control how the ink works? Any long term damaging effects? Thx man!

[@shondafox]

Any issues yet with not shaking the white ink? Have you installed a waste tank yet? What maintenance are you doing daily/ weekly?

[@HangryMuscle]

No not yet. Right now there's no need for a waste tank. I didn't have to do constant printhead cleans so the box lasted over a month. Also there's no chip resetter so you have to replace the box or the chip on the maintenance box. Daily/weekly I was just refilling ink, I just started shaking the inks. Other than that no other daily or weekly maintenance was required. I've pretty much only had to use the printhead clean function and I don't use it daily only if lines start to mess up.

[@uglybarn3005]

@@HangryMuscle can you tell me what the box/maintenance box is that you're referring to. Ty

[@xZk18x]

@@uglybarn3005 watch this video it will explain kzbin.info/www/bejne/anKTi6xqZauWasU

[@HangryMuscle]

@@uglybarn3005 the maintenance box is where the printer sends all the wasted ink. When its full you need to replace it for a new box or reset the chip on the maintenance box.

[@HangryMuscle]

@@uglybarn3005 kzbin.info/www/bejne/anKTi6xqZauWasU

[@m_r_blackthunder]

The most important part of the conversion is removing the rollers. Yet you failed to show any detail on the needed steps, tools, and disassembly of the printer (If needed) to accomplish roller removal.

[@HangryMuscle]

I didn't find a safe way of removing the rollers. I popped the far left side out and yanked the other side out, ripping the metal piece that was holding it in place. I recorded the whole process but its like an hour long, im doing a video just on that.

[@kiethharvey2194]

@@HangryMuscle I need to see that

[@JoseSalazar-lh3xl]

Mr @hangrymuscle I want to thank you for this whole video from start to finish I wanna let you know that I wish you the best and God bless you bro . Not everyone shares were they even get the Ink from and just from you simply doing that I have gained so much knowledge

[@fame2394]

Im about to rewatch did he mention where to get ink?

[@tuniciataylor2192]

Where do I buy the grey ink

[@daveswimm1827]

What do you use as a printer profile because the ET8550 is not a sub or DTF printer, will that work for 6 color sub printing?

[@HangryMuscle]

Are you talking about the ICC profile or the rip software?

[@litlsuz]

@@HangryMuscle I would like to know too. Thanks Hangry!!!

[@HangryMuscle]

@litlsuz I use Acrorip and Acrorip's default CMYK for my ICC profile.

[@litlsuz]

@@HangryMuscle Thanks Hangry!!! I'll keep watching!!!!

[@lisaweaver3124]

Good morning I just came across your video can you please tell me why you have to remove the rollers?

[@HangryMuscle]

I have a video on the channel explaining the reason

[@daphnenoble8617]

Thought you had this printer already. Is that how you made the shirt you have on?

[@letsmakemagic9066]

Couple question what film would u run in it

[@HangryMuscle]

13x19 hot peel

[@barbiesainz1245]

where do you put the white? in Photo Black and th gray? can you confirm?

[@HangryMuscle]

Doesn't matter, it can go in any of the channels

[@ggvemini7873]

How do you know which white goes where ? Do those bottles come with the printer

[@HangryMuscle]

kzbin.info/www/bejne/d5bbeINvrsinl6c

[@shekirarawlings3159]

With this printer would i need any special software for the dtf

[@HangryMuscle]

You won't need chipless software, you will always need a DTF rip software.

[@relighttttit1823]

Is there any run off ink that you need to worry about when doing DTF with this printer ?

[@HangryMuscle]

What do you mean?

[@VidaMigrantes]

Can I convert an epson f170 to dtf too?

[@suequiroz9702]

Do you fix printer or can you do a one on one?

[@icyborg6065]

did he removed the little wheels? the part that every epson converter usually removes a plate from inside so the DTF ink does not smear? I think I missed that part.

[@HangryMuscle]

This is the old video. Watch this one kzbin.info/www/bejne/d5bbeINvrsinl6c

[@Littlemismartha]

So u have 2 ways to convert this one without using a external tank and the other video showing u using one right?

[@JenLapent]

Can you do a video to show once printer is set up what to do on your computer as far as downloading cadlink goes and whatnot? I'm having a hard time finding a tutortial video on yt that really shows that from beginning to end.

[@HangryMuscle]

Look on the channel or we can do a video call session. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour

[@user-cd5rk7hp3s]

I follow your same instructions but when I use my rip software my black and white ink is not working even I fix ink Chanel plz guide what is the reason

[@carloscamargo6625]

Did you solve how to shake the ink in the tank ??

[@HangryMuscle]

Not yet, but so far its going on 2 weeks and I've had no clogs. I'm not printing everyday as well.

[@carloscamargo6625]

@@HangryMuscle Great, even if you must use the full white ink tank in a week, is not bad. Other question. The print head looks similar to the xp15000 or is more like the dx7 print heads, with dampers ??

[@HangryMuscle]

@@carloscamargo6625 I'm not sure, the printhead is completely covered on the 8550 its hard to tell.

[@zpastock4204]

What about white ink waste tank? Do we need one with this printer?

[@HangryMuscle]

Still remains to be seen, right now I don't.

[@spunkybear1597]

Still trying to learn. What is a white ink waste tank? Thanks.

[@HangryMuscle]

An external tank for the ink that is used during a printhead clean.

[@thailafields6962]

I just got a Et 8850 and removed the rollers to make it a dtf printer but now my printer says it’s jammed and it’s making a loud clinking sound. How do I fix it ?

[@HangryMuscle]

www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour

[@tdsonley1]

Man... I just converted mine to sublimation.. wish I would've saw this first..

[@HangryMuscle]

You can switch it by draining the inks and cleaning out the ink tanks. kzbin.info/www/bejne/h4SWnoKqnq2JlbM

[@c10kid89]

Would acrorip 10.5 work with this printer.

[@HangryMuscle]

Yes, here is how to set it up kzbin.info/www/bejne/p5DEpH2ubq2SnKs

[@vanhalyn06]

Can you purchase the CISS system from China I see people talking about to shake the white up?

[@HangryMuscle]

Yes

[@rolandom]

Does dtf work for any type and color of shirts?

[@HangryMuscle]

Yes any color and material works with DTF

[@dkastra26]

why dtf over eco solvent or sublimation? im new in this hobby

[@SeanOliver5981]

How did ypu learn to mix the ink? So that it won't plug the ink heads or dage printer

[@HangryMuscle]

I haven't, everything seems to be working and I'm almost through the first maintenance box.

[@uglybarn3005]

@@HangryMuscle what inks were mixed. DTF + ?

[@HangryMuscle]

@@uglybarn3005 None

[@brialo6016]

New to your channel do you have to take the rollers out to print

[@HangryMuscle]

kzbin.info/www/bejne/a2nYmqiPed9rbKM

[@zpastock4204]

Hi, what about the white ink waste tank?

[@HangryMuscle]

I haven't tried installing yet.

[@zpastock4204]

@@HangryMuscle and you haven’t had any issues with white ink yet?

[@princekings3272]

Love this channel! Question, when you put in the DTF ink and did a print test, did you have to configure anything or get Acrorip? My black, blue and yellow are showing but the magenta and white aren’t? Thanks

[@HangryMuscle]

Thanks bud! No, I didn't the nozzle check should show all the colors WKCYMW. Run a print head clean or a power clean to pull ink into the printhead.

[@princekings3272]

You are a genius worked great after multiple print head cleaning! Thank you!

[@HangryMuscle]

I wouldn't go that far haha Glad it worked out 💪🏾

[@abbysellsrealestate]

I'm having the same issue now :( ...thought it was me, I was almost ready to send this back....sooo glad I stumbled on this question

[@bethalvarez6956]

I haven’t watch the whole video yet but is there a way to add a mixer for the white ink or do you have to do it manually

[@busybitch3401]

Question, it may be dumb and or already talked about new to DTF why do you need to remover the rollers from the printer?

[@HangryMuscle]

kzbin.info/www/bejne/a2nYmqiPed9rbKM

[@ronaldclapp56]

Need to take out rollers

[@HangryMuscle]

I ended up just having to rip them out. I couldn't get to the screw that was holding it in place on the right side.

[@creativesublimation7768]

Hello, please, I need your help. I bought the 8550. I did the whole process, but when I print the colors, they come out wrong. First, it prints the white and then the color. Can you help me please?

[@HangryMuscle]

Hi, in print preview screen, check both boxes "print color first" & "color + white" both copies color & white should also be set to 1.

[@bengomez7344]

can i drain the sublimination ink to make it dtf ???

[@HangryMuscle]

Yes, why would you not be able to?

[@alexleon-mm1uy]

tienes algun contacto para conseguir el cabezal

[@HangryMuscle]

Gedat-spareparts.com

[@iamkjj4908]

Hello. My ink is covering in blue instead of white. I’m using acrorip 10.3. I set ink channels to match the order I poured the ink. Any idea how to fix the said issue?

[@HangryMuscle]

Update to atleast Acrorip 10.5.2 or set the first two channels opposite to the tanks in the rip settings

[@iamkjj4908]

@@HangryMuscle thank you

[@Oscar-vg5xe]

Where i can buy the software for the printer 8550 when i convert to dtf ?

[@HangryMuscle]

Here, Cadlink or Acrorip will work. dtgpro.com/ciccategory/rip-software.php?afl=3277

[@DBAMoe]

Do you need the wide format one?

[@HangryMuscle]

Yeah you do you if you want to make anything bigger than just kids clothes. Lol

[@Zaim-group]

Have you encountered a problem with this printer? Do you print on a daily basis? Is it true that dtf inks deteriorate the printer head and every six months the head must be replaced?

[@venlo7113]

What's the answer to this?

[@HangryMuscle]

No

[@alfredoboys]

What type of heat press are you using ?

[@HangryMuscle]

Transpro 16x20

[@csq530]

Hey can the EPSON ET 15000 be converted too?

[@HangryMuscle]

No, the EcoTank ET-15000 can not be used for DTF

[@deborahloreal270]

Can I take the rollers out before putting the ink in? I'm still awaiting the inks arrival lol

[@HangryMuscle]

Sure

[@monmolmarket]

hello after of all this time, works good??

[@HangryMuscle]

Yes

[@betinhosouza5262]

Hello, how do you stir the white inks when printing, as the ink tanks are fixed, then how do you stir the white inks?

[@HangryMuscle]

Hi watch this kzbin.info/www/bejne/mpjTgnyKfreLj80

[@pixelbat]

But how do you deal with white ink settling? Do you shake your whole printer? :P

[@HangryMuscle]

kzbin.info/www/bejne/mpjTgnyKfreLj80

[@TheDmf1979]

Can I use Acrorip 9.0.3 with this? X

[@HangryMuscle]

You can use the Ekprint demo. www.eukondigital.com/ekprint/demo_download.asp

[@brendafogerty1685]

@@HangryMuscle what printer model did you say you had when getting the software demo? The epson 8550 isn't in the drop down menu to choose.

[@riskeyrotors967]

why is it that the rollers have to be removed ???

[@PulseCheckCorazon3]

What software do you use? Cadlink $495 or do you need any software to print DTF?

[@HangryMuscle]

I use both Acrorip and Cadlink, mainly cadlink and yes you'll a rip software in order to print DTF

[@jeanettehead3358]

How did you take the caps off?

[@HangryMuscle]

Twisted them off

[@francescocaradonna8028]

SI POTREBBE ACQUISTARLA GIA' MODIFICATA ? DOVE?

[@HangryMuscle]

Not yet, soon!

[@alexmoreno5894]

Does it have to be a 8550 machine or can I buy a 4800 machine epsilon

[@HangryMuscle]

kzbin.info/www/bejne/r5CXaquraMiopcU

[@csq530]

Hey Hangry the shirts in your web site are printed with the DTF of your videos? I love them! I may buy one!

[@HangryMuscle]

Hi San, yes they are! Go for it, then you can feel the DTF for yourself.

[@csq530]

@@HangryMuscle hey i went to buy the Tshirt but no PAYPAL or just regular credit card processing as a matter of fact it says that the amazon pay is no available for your website!

[@csq530]

@@HangryMuscle HANGRY!!! The shirt was AMAZING!!! I must say that i found it at the beginning a little expensive but when I saw the extra stuff (specially the bag which I needed) I was pleased!!! I think that the quality of DTF is better than DTG! Which of the INKS that you have advertised did you use for that shirt! I hope that the print on demand companies move to that medium so we dont have to worry so much about quality standards! Did love the stickers too. Who makes your stickers?

[@HangryMuscle]

@@csq530 awesome, glad you love it! 💪🏾💪🏾💪🏾 Yes, the quality is definitely the best and it lasts a long time. I use the Dtgpro ink and film. DTF Ink (CMYKW): dtgpro.com/cicproduct/dtf-pro-eps-ink-1l.php?afl=3277 DTF Film A3+ (13x19): dtgpro.com/cicproduct/dtg-pro-transferpapa3plus.php?afl=3277

[@HangryMuscle]

@@csq530 I had a local supplier do the stickers awhile back, I don't remember the name of the company.

[@onespeedlite]

Wouldn't it be easier if you used a small funnel to refill the bottles?

[@HangryMuscle]

Haha yeah, i use funnels to refill my ciss . kzbin.info/www/bejne/d5bbeINvrsinl6c

[@epepmuexxx]

Does epson L850 work for dtf?

[@HangryMuscle]

Not sure, if you can find a DTF Rip Software for it, It probably will.

[@Sivarwraps]

Can you tell the purpose of removing the rollers

[@HangryMuscle]

kzbin.info/www/bejne/a2nYmqiPed9rbKM

[@tyhinchcliffe8867]

Does this printer still function after 12 months,

[@HangryMuscle]

Yes

[@dcondorcbr]

Hi there Paper out in cassette 2 ? ( Printer needs to check Print Head ) Just converted, tray is out . need to use a feeder on top. Please help >>>

[@HangryMuscle]

Remove the bottom trays completely from the printer. In the printer preferences select auto or rear feed as the paper source

[@dcondorcbr]

@@HangryMuscle Thanks for your help But I don’t understand why don’t want to print .

[@dcondorcbr]

Keep telling me paper out cassette 2. I can’t use the feeder on top .

[@HangryMuscle]

You'll need to follow the instructions in my previous comment, if you still can't get it. Visit my website to sign up for a video call session. I'll get it fixed. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour

[@dcondorcbr]

Tell me please what is next

[@iamEricaNichole]

What is the biggest size it will print?

[@HangryMuscle]

12.6x 17

[@iamEricaNichole]

Thank you

[@HangryMuscle]

You're welcome 😁

[@rubenagurcia906]

What about setting waste ink pipe?

[@HangryMuscle]

If you don't have a chip resetter there's no point.

[@rubenagurcia906]

@@HangryMuscle so you mean this printer doesn't need it?

[@HangryMuscle]

@@rubenagurcia906 its optional on all printers. If you don't want to buy maintenance boxes replacements then you need a chip resetter and then you would build an external waste tank.

[@miguelangelgalavizsegovia8545]

Use acrorip?

[@HangryMuscle]

dtgpro.com/cicproduct/acrorip-v11.php?afl=3277